Mac wont start up!!!!!the login page wont appear!!!
a black screen appears,and i hear a triple beeps each time i try to open my mac..please help..is it a ram problem?
am so soory guys..i went to the mac service provider for the third time with the same complaint.
which is a triple beeping sound upon starting and a black screen
in the firs time he replaced 2 memory ships
and my mb only worked for 30 days after..
2nd time i went but fortunately it started up normaly but 30 secs after the screen crashed into black with non beeping,so he reseted the system and my mb worked normally ONLY for 30 days later
the third time,he told me that the main logic board is defected and i got 2 options either to change it with an imaginary price or to UPGRADE ur memory to 2 gb integrate memory in the bottom slot
please guys i know u r experts in these stuff,i need ur experiences to share it with me,hes now waitnig for my call to decide..plzzz answer me asap..many thanks in advance
Similar Messages
-
I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway. -
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...
There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote. -
when i open up computer the login screen comes up and then goes dark right away. can't do anything with it. close lid and open up and it comes up again and then goes dark. i have to shut off and restart to get through the login page. then seems to work untill i close lid again. just started this today. software is up to date. using a month old mbp 15. any suggestions? thanks.
You could try wiping the hard drive and reinstalling the OS and all your programs.
Did you install any programs yesterday?
If not it may be best to take it to an Apple care center and have it checked out. Take it in while it is asleep so you ccan show then what is happening. -
I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
Everything is in english except the login page??
Hi i bought this macbook pro second hand from a china girl, this set should be bought in singapore but i think she did some settings to it and the login page wont stop showing in chinese? sometimes when they prompt question it just came out in chinese while all my settings is in english... please help because it looks so ugly with all those chinese characters while i want it all in english pure english....
OS X: How to change the language displayed in the login window
-
Adding custom message on the login page
I have done the following to try and get a custom message to display on the oracle login page:
1:
In the System Administrator Responsibility, went into the System Profile Options and searched for "Local Login Mask" The default value was 32, I set it to 96. This was done because 64 is the number to display a "Corporate Policy Message" on the login page (32+64 = 96).
2:
Switched over to the Application Developer responsibility, and went to Application->Messages. Here I did a search for "FND_SSO_SARBANES_OXLEY_TEXT". A result came back with current message text: "Corporate Policy Message". I changed this to a test message and hit save.
3
Still in Application Developer responsibility, I went to Other->Requests->Run and chose "Generate Messages", for parameters I chose:
Language: US
Application: Application Object Library
Mode: DB_TO_RUNTIME
while leaving the others blank. I submitted this request and it completed normal.
4
I logged out of applications, closed my browser and cleared my cache. I went to login into the apps and at the login page... it does display "Corporate Policy Message" but it never updated it to my custom one.
Question: Do I need to restart the HTTP server or something to see the updated results? I am confused why it will display "Corporate Policy Message" but the value for FND_SSO_SARBANES_OXLEY_TEXT is clearly changed. Even when you go back into it and look.
The Generate Messages conc prog is a spawned process so I cant find out what its doing.
Any help would be loved!
OH PS
I know I started a previous thread on a similar topic, but the method has changed completely and I think it merits its own thread. My apologies if it shouldn't have been.Hi;
What is your EBS and OS?Please check below thread
password-Lock User when enter password in wrong 3 times
Re: Lock User when enter password in wrong 3 times
Regard
Helios -
How to insert an username from the login page to the form page
Hi friends,
I created one database apex application in which it consist of three pages...
1)login page----->1
2)form page along with report page(in same page) i.e. i created a report region within a form region
3)form page(this page appears when i click the edit option in my previous report page
(i.e.) my 3rd form page depends upon my 2nd report page, as soon after i click the edit option of each and every row in my report which is in 2nd page it has to go to the corresponding 3rd form page for making an updations in each and every row...
I have created my above listed applications....
But the scenario for me is since the login page contains two fields, that is
user name:
password:
so i will be giving my name in the user name and also respective PW for accessing to my 2nd and 3rd page in my application...
Since my 2nd form page consist of following fields like
*) user name---------->
*) assigned to
*) status
*) start date
*) priority
so my requirement over here is soon after i logging into my application through the user name and PW into second page, while coming to the second form page
my user name field in my 2nd form page has to get inserted automatically with the user name that i have entered in the login page...
example: my user_name in login page is :harry
after going into the second form page with the user name "harry"
the field of my 2nd form page "username" has to get automatically generated with the name "harry"
Whether it is possible friends to do this in my application....i doesn't have any idea of it...Kindly help me friends to solve my scenario...please explain each and every steps in detailed manner...
Since the user_name: harry, is of I got from the admin side as a developer for the workspace......
Thanks in advance
Harry....Hi Karthik,
I made the following changes that you said, but there is just a one change in it...
You told these changes
Source Used: always, replacing any existing values in session state.
Source Type: Database column
Source value or expression: (respective column name)
and in Default: u need to give-----> &APP_USER.(exactly the same including the full stop)....
Thanks for your help Patel....I just worked and inserting for me in table of the corresponding user name who login..... -
Earlier, I changed my Apple account details to reflect my new email address. I also changed the password. iCloud seems not to 'know' this. It's service is disabled until I login in. But the default email address shown on the login page is the old email address. I can find no way of telling I cloud that I have new account details.
To change the account, go to System Preferences>iCloud, sign out, then sign back in with your revised credentials. If they aren't accepted, recreate the old ID at https://appleid.apple.com/ and changing the primary email address back to the old one (no need to verify the email account). Then sign out of the old ID on your Mac, providing your current password if prompted. Once you have signed out, change your ID back again, then go to System Preferences>iCloud and sign back in with your updated credentials.
-
To log in on a public network without a password-key (not secured), a user login is required.
After connecting to the network, the browser, upon opening it, normally automatically loads the login page, in order to enter a username and password and connect to the internet.
Firefox doesn't find the login page automatically, so I need to switch to google Chrome just to log in to the network.
Does this have anything to do with user settings in the options of firefox?
Any ideas?
thx!Hi,
You can try setting the login page as the [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page Home page] and choose to '''Show my home page''' beside '''When Firefox starts:'''.
Alternatively, and/or to preserve your current settings you could also pin it as an always present one-click away [https://support.mozilla.org/en-US/kb/what-are-app-tabs App tab]. -
HT3867 My iPhone won't display the login page for public wireless hotspots
My iPhone 4S does not load the login pages of public wifi hotspots. It has not always done this for I cn remember a using it afew times. Help please before I break this phone lol
One possibility is that you have specified DNS servers in your Network preferences. (Network Preferences -> Advanced -> DNS, see if anything is specified.) If so, you want to create a new network location which doesn't have any DNS servers defined. (Network Preferences -> Location -> Edit Locations.) Create a new one (click the + sign), and use that location when logging on to public WiFi hotspots.
The other (and worse) problem might be a security feature added to OS 10.7.2 and higher versions.
Apple found out that a hacker could fool you into accepting a bogus "update" via a fake Software Update pop-up. The fix was to rig the OS so that, when you connect to a wifi network, a Mac running the new and improved OS will silently "phone home" to an IP address at apple.com, and inquire about the hotspot's certificate. If it fails to get back a message declaring the hotspot's certificate to be valid, it assumes that the hotspot login popup is fake, and won't let you proceed. The permanent solution is for the hotspot's "captive portal system" to allow Macs to connect to the Apple host, so that the OS can do the verification. Most public WiFi systems have made the adjustment, but there are quite a few (including many schools) who are behind the curve. If this is your issue, tell whoever runs the network to get with the program!
While waiting for that to happen, you can always copy the login page url from a PC (or older Mac OS) that is able to access the hotspot, paste it into your address bar, and take it from there. (Truncate the url at the first question mark . . . the ? and all the junk that comes after it are likely to be specific to the machine you copied it from. You'll see a fresh bunch of junk materialize, as the site talks to your Mac.) -
The login page of EM lost just after password changed
hi,
recently, i changed the passwords of SYS, SYSTEM, SYSMAN. when i tried to manage the system through a browser again, i found there is no way to login EM then. I tried to change the passwords back to the previous passwords which created during installation, I wrote 'alter user SYSMAN identified by abc-123' within the sqlplus window and run the statement, but i got a message: 'ORA-00922: missing or invalid option'.
so, how can i change back the password for the system users?
or, what should i do after passwords changed, so that let the login page come back?
thanks!
----guo.This is because you haven't made changes in emoms.properteis file because password used by the oms are located in the
$ORACLE_HOME/sysman/config/emoms.properties files
Any way problem is curable
1 Go to DBHOME/bin ,Issue comamnd
alter user sysman identified by "abc-123",
2 Go to OMSHOME/bin
emctl stop oms
3 change the repository password by using comamnd setpasswd oms ,
4 Start the oms and try to login again
This is not supported way of changing the passsword , You should use the configuration ui to change the password for the Management Services and Repository target. That is the correct, supported way of setting the password for that target. -
I am unable to log into the server wiki. I can get as far as the login page.
When I attempte to log into our company server wiki I can get as far as the login page.
When I type in any user/pass all I see is a spinning wheel on the login panel.
The error that is occuring in the back ground is as follows
ActiveRecord::StatementInvalid in LoginController#plain_login
SQLite3::SQLException: attempt to write a readonly database: INSERT INTO "users" ("uid", "created_at", "shortname", "longname", "generated_uid", "updated_at") VALUES (...)
I have confirmed that the postgres server for collab is running and I am able to connect to it through a Database Utility. I can also verify through this database utility that the Wiki is in tact. I do not know where else to go form here or if the errors I am seeing are not related to the wiki.
I am open to any possible assistance through this endeavor. I am running a Mac OS X server version 10.7.5.Thank you so much. I deleted all of the Netflix history and the cookie. and it works fine now. Thank you again.
-
Login error in the login page ...
Hi all,
I have a few applications in my work space but one of the application I can not run, when try to run getting this error message -
ORA-06550: line 1, column 10: PLS-00201: identifier 'RATIS_USER.IS_ADMIN' must be declared ORA-06550: line 1, >column 7: PL/SQL: Statement ignoredIn the debug section, it shows the following -
0.02:0.02: S H O W: application="37206" page="101" workspace="" request="" session="3410044959524885"
0.03: alter session set nls_language="ENGLISH"
0.03: alter session set nls_territory="UNITED KINGDOM"
0.03: NLS: CSV charset=WE8MSWIN1252
0.03: ...NLS: Set Decimal separator="."
0.03: ...NLS: Set NLS Group separator=","
0.03: ...NLS: Set date format="DD-MON-RR"
0.03: ...Setting session time_zone to -05:00
0.03: NLS: Language=en-gb
0.03: Application 37206, Authentication: CUSTOM2, Page Template: 5425767280642058915
0.03: ...Session ID 3410044959524885 can be used
0.03: ...New Instance Detected - :4500:4350:4000:50843
0.03: ...Application session: 3410044959524885, user=TAJUDDIN335
0.03: ...Determine if user "TAJUDDIN335" workspace "2617034107818392993" can develop application "37206" in workspace "2617034107818392993"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 37206, page 101
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Authorization Check: "5474429220436784237" User: "TAJUDDIN335" Component: "APPLICATION"
0.03: Fetch application meta data
0.04: Computation point: ON_NEW_INSTANCE
0.04: ...Perform computation of item: F102_APP, type=STATIC_ASSIGNMENT
0.04: ...Performing static computation
0.04: ...Session State: Save "F102_APP" - saving same value: "RATIS - Recreation And Tourism Information System "
0.04: ...New Session = True
0.04: Processing point: AFTER_AUTHENTICATION
0.04: ...Process "set_is_admin": PLSQL (AFTER_AUTHENTICATION) IF ratis_user.is_admin(:APP_USER) THEN :F102_IS_ADMIN := 'TRUE'; ELSE :F102_IS_ADMIN := 'FALSE'; END IF;
0.04: Encountered unhandled exception in process type PLSQL
0.04: Show ERROR page...
0.04: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
>
I could not find anything in the login page 101, I had one custom_authentication package which I have removed but still the same error. Any ideas ....!!!
Thanks in advance,
TajuddinLooks like you have an on-new instance application process that calls a non-existent function "ratis_user.is_admin".
Scott
Maybe you are looking for
-
Muse CC installer says it can't install because beta version is present
The Beta was uninstalled with the Adobe Uninstall app and is gone, but the installer says it can't install because a beta version is installed. it is not.
-
Steps or path to revert to original file after Media Encoder has shortened video length by 15min
I was trying to encode the video to decrease the upload time and instead reduced video length by 15 minutes. I dont know how or what happened. after selecting encode. It seemed to do what it was supposed to and then upon viewing the movie i realize
-
Can someone test my podcast on their iPod please?
hello -- i just set up my first podcast but don't have an iPod to test it on. is it possible someone could test it out? i subscribed to my own feed in itunes and it works, but it's not searchable yet via itunes, and i don't have an iPod to test that
-
Link to a topic in another project (in a new window)
When I make a link from a topic in project A to a topic in project B, i can´t change the hyperlink-options. So the topic from project B is showen in the same window as the topic from project A before. Is it possible to make it open in a new (second)
-
Need to draw process diagrams in JSP's
Hi, I have a requirement where I need to show process diagrams, DFD's to users in JSP pages. Another thing is I want to allow user to update the diagram if he feels that the diagram is not proper. Is there any tool or API using which this can be acco