Mac working too slow when switch to one to another user acconut

Mac working too slow when switch to one to another user acconut...
it means when working on one user acconut and i switch to another account its take too much loading + slower than 10.8
solve it..
Thanks

iTunes will naturally stop playing since it acknowledges that you're not actively using your current account.

Similar Messages

Submit Program - Copy works too slow when selecting XMLP program

Hi
Whenever I try to submit new concurrent program using copy button, if i select xmlp program, it almost kills the instance and takes lot of time ( at least 4-5 mins) before populating parameters etc whereas for non XMLP programs, it populates instantly. I did some RnD and found that the moment layout is linked to conc program, copying becomes slow.
Is it problem only I am observing or it is a general issue? I have tried this on 4-5 different instances and everywhere having same problem.
Regards
Varun

First of all i would like to thank you for all your answers!
I tryed all the sollution you proposed but nothing has really changed it speed.
1° The loops are not running in parallel, would it be faster if they were ? how do i make them run in parallel ?
2° the sequence structure was indeed reduntant, everything work nicely even without it!
3° closing the Visa sources after the loop doesn't make the program executes faster..
4° 3 seperate loops instead of one doesn't make a huge difference ...
5° Waits/Delays doesn't make the system faster (or maybe i didn't know how to use it propoerly!)
6° What do you mean by "convert the Express vi's to DAQmx code and work from there" ??
i have no ideas how i'll solve this problem, any comment or remark are very welcom !
Thank you again for your help!
Yanis

I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.

mac pro too slow to use, spinning ball, no finder response, only hard power off, installing system stalls at 18 minutes left.
It is taking an hour to power up and mac apple logo appear onscreen. No finder controls or "clicks" are being recognized. Spinning beachball all the time.
Using hard power off and holding the mouse down, I was able to open the optical drive and then restart with "c" and ask the dvd to reinstall the system, but it has stalled before finishing the installation.
This happened about 4 days ago, first it started responding slowly, and then it just keeps spinning the beachball. I can't find hardware test. I did run etrecheck, it did not have any error messages, but I can't copy or move the data anywhere.... I am not able to access the mac pro with another machine, and now I am stuck in install freeze, so I can't copy etrecheck by hand onto a piece of paper.
Without being able to finish a reinstall, what can I try?
After it got bad, and before it got REALLY bad, I managed to repair permissions, but it took a long time. Most of a day. When I restarted from that, things were only worse.
Mac Pro 1,1 , 11 GB ram, 7300, 5TB hard drives, OS 10.6.8, the drive containing the system folder is/was 700 used, 290 free. While I could get commands to respond, I put Activity monitor on the desktop and watched it. System memory was 3.31 GB used, about 7 free, and some wired. No app was using a huge amount.
what should I try next? I put a bid on a new/old machine so that I could move the 4 hard drives over.

Thank you for all your suggestions. Please correct me as I articulate this.
I have three versions( 5, 6, CC) of the Adobe Master Collection which I keep active for different clients. I have final cut and motion. I have Office 365. I have a collection of graphic apps that are individually not too big but in all, my app folder is 65GB and my bootcamp partition is 61GB. I can't fit all this on 120 ssd and a 256 will be full once I install, correct? drives should be half open?
Somehow I did not make it clear enough that I was trying to copy onto a 2TB drive I had just initiallized in order to try and save files from my startup drive. I don't use time machine. I take a day or a few days worth of documents and physically move them to another drive at night. If a series is finished I make two dvd's as well. The second black drive that was failing was the drive I moved my backup documents onto. At no point was I trying to backup onto the failing drives. I was trying to copy off both of them onto the other two drives, a third aux backup that has been there for a while, and a newish 2 TB which I designated as the startup drive when all this trouble started.
I wondered if there were any good techniques for trying to get the data off the failing drive. Thanks for the suggestion of Data Rescue 3. I don't have it yet, but I will try it as soon as I get it. I was never trying to repair in place.
I am very interested in getting a pci bracket and an ssd, but I may wait until I can afford the larger one. If I get an older bracket that is compatible with my old mac pro 1,1 , I'd like to be able to move it to a mac pro 3,1 if I get one. Will the larger ssd drives be compatible with the sata in a pci bracket that can work in my mac pro 1,1 ? sata 2 versus something else? If 240 or 256 is my size limit, how much more than my 65 and 61 GB partitions can I put on there? How much of a scratch disc can I make if I leave another 39 GB of headroom on my bootcamp partition? I'm filling 165 GB without making any allowance for temp files.
You have said that 120 is enough for any system. I think I must be misunderstanding something. Are you saying that assuming that most people run office and photoshop and maybe lightroom?
I have and use 4 HDD in this machine, mostly for document storage in two places.
I took out all but the group of 2GB ram chips I bought a year and a half ago. The old ram had passed the hardware test the last time I had access to the hardware test. Two black drives failed, one was a year old and one was a year and a half old, and that it may have been exacerbated by the heat wave. I don't know why the video and the monitor were affected save that the startup drive was failing. I am trying to replace the card.
With all this said, I am also looking at a used mac pro 3,1 with a better video card since a newer machine will likley be compatible through another OS upgrade. If a machine costs only a little more than a new card, it might be a better way to go.
I don't have any sources that offer an ssd for 100. ( of a size that is useful)
How large is your application folder?

G5 dual/1.8GHZ slow when switching users and starting mail, opening files

I have 20' imac dual cpu G5/1.8ghz/1gig/250gig drive with 10.4.11.
It is much slower than the G5 it replaced. Symptoms include: very slow when switching to another user desk tops, opening up the hard drive for the first time once you get there, opening entourage or mail for the first time; lots of beach balls.
The drive has more than half the space left, we don't have many applications running, our iphoto and itunes libraries are under 20 gig combined. I ran the disk utility and cleaned up permissions. We typically leave the mac on all the time but restart occasionally.
Any ideas?

We'll let you in because you used to have a G5 iMac , but you really should post on the dual page. Anyway, have you cleaned your caches in the browser you use? You can use OnyX to clean all the caches. Make sure you empty the trash in all your user accounts as well. Try resetting the PRAM too.
Hope some of this helps,

My mac got too slow during startup.

My mac got too slow during start up. how I can make it as before?

Download and run Etrecheck. Copy and paste the results into your next post. It's a diagnostic tool that was developed by one of the most respected users here in the ASC.

SQL Developer 2.1 working too slow

Hi All,
I am working on SQL Developer 2.1 after 3 years previously I used version 1.2. Comparatively so many changes came in 2.1 version but it is too slow and while debugging variable values not shows in Tooltip we need to depend on Smartdata tab. If any settings or patches available for following problem than please provide me.
1. Too slow
2. Variable values in Tooltip
By
Srinivas M. P.

SQL Developer using 127232 KB, Free 1.32 GB
Is there any setting is SQL Developer or you talking about my system memory.
If you talking about my system memory than I am using 2 GB RAM in my system and system working well
If I do anything in TOAD than TOAD is working fine but SQL Developer working too slow.
Edited by: SrinivasMP on Feb 5, 2010 3:34 PM

I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device

I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device. Now what should I do?

Welcome to Apple Support Communities
Press Option key on boot and select the OS X partition. If it isn't here, press Command and R keys on boot, open Disk Utility, erase the drive and install Lion or Mountain Lion

Mac works very slow

Mac works very slow. Sometimes my mous refuse to work. Its seems like mac download enything. Any Ideas?

On the bottom of your MBP there is the serial number. Enter it here and post back the results:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Here is a trouble shooting guide. The usual reasons for slow performance are the HDD or third party applications. Boot into the recovery partition and run Disk Utility>First Aid.
https://discussions.apple.com/docs/DOC-3521
Down load Etrecheck and post the results:
http://www.etresoft.com/etrecheck
This may show some inherent problems that may be resident on your MBP.
Ciao.

Created help file either won't open or opens blank when emailed or copied for another user to see it.

Created help file either won't open or opens blank when emailed or copied for another user to see it.
Our HR person made a help file she wants to email to someone or copy to a network share.
-If she emails it the other person cannot open it.
-If she copies it even from her desktop where she saved it to the folder with all the other files, it opens blank.
Any help would be appreciated.

I think they must be swapping out .html for .chm in DW or something. What the OP describes sure sounds like what happens when you do that.
@dfiore27101
DW doesn't support .chm file types. Adding the extension doesn't compress the images into the file to create a true .chm.
Adding .chm will make a perfectly good .html file stop displaying in DW though.
An easier way to send someone .html help files would be to archive their folder as a .zip then email the .zip. The recipient would then need to extract the archive to view the files in their browser.
I don't know of any way to create real .chm files in DW.

My mac got too slow within certain minutes

Hello,
I've got a huge problem with my iMac: -
iMac from 2012
8GB Ram
3,4 GHz i7 Quadcore
1 TB hard disk
AMD HD 6970M 2GB
- within only minutes, my mac got unbelievable slow. Way too slow.
Certain examples:
My mac isn't able to show the clock on the dashboard fluently, that means, the second hand does two steps, and then the mac stops for 10-15 seconds. The again two steps, then it stops again..
My mac is useless. After every click with the mouse, the colored circle comes up, and I have to wait for 10-15 seconds.
I didn't change anything when this problem comes up. On the harddisk is more than 25% free space.
I am absolutely confused and frustrated.
I should tell you, that my windows partition on the Mac hard disc works without any problems, so actually the problem cannot be any hardware issues... I think..
Please, Please help me, I need my mac.
Greetings
Tim

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac Pro Too Slow and Freezes

Hi there. I have an Intel Mac Pro which I bought new last year. It has 8GB RAM and four large-ish internal drives. And it's become so slow I can't use it for anything. This has happened to me three times before and out of frustration I replaced the hard drive once and formatted it another time. Both times it came back up to speed, but I can't do that every couple of months.
It's freezing during ridiculous things, too, like when I open up the system preferences to adjust the input volume. I get the spinning beach ball indefinitely and have to do a forced quit on the system prefs.
I have bought and run: Disk Warrior, Macaroni, Onyx, Mac Maintenance, and Tiger Cache Cleaner. Can you tell I'm desperate?
Any help would be greatly appreciated. No one seems to know what the **** is going wrong. I don't download stuff other than programs connected to my work (Photoshop editing), so I can't see why this would happen.
Thanks.

Basic system methodology over now to some diagnostics:
(You can find above information on Pages 32 to 36 of your MacPro user Guide )
Using the number(s) noted earlier and a coloured (colored) marker pen identify and mark the faulty RAM remove it AND its matched pair from the Riser card and set them aside.
The Ram is held at the ends by hooked clips that you push outwards with your thumbs to release them. Don’t force RAM as you will bust these hooks and possibly kill the Riser card at the same time.
Adjust remaining RAM pairs to positions following above population chart, and take the opportunity to VERY CAREFULLY blow away any dust on the RISER particularly around the RAM contact blocks and rear contact strip itself. Handle with care and also avoid getting finger oils on those contacts at the same time.
NB.
If the fault is reporting on either position1 or position 2 of RISER 1 (Top Riser) only remove the pair as above and move the pair from position 3 and 4 on the SAME RISER into position 1 and 2.
If no faults are reported on RISER 2 what you now do is swap over each Riser card (They are completely swappable!). Place the card from Riser 2 in the Riser 1 slot and card from Riser 1 in Riser 2 slot with all fault reporting RAM removed.
When you do reboot the MacPRO will now register Riser 2 positions 3 and 4 as being empty !
Right next refit the RISER cards. Side the cards into the Slots upto the block and press with your thumbs and they snap back in.
With the side panel temporarily off re connect your monitor, key board and mouse only, replug into power socket and press start button to boot up
Continued:

With multiple inboxes, when I switch from one to another the inbox view is at the top rather than where I was when I switched to the other. This is new.

One inbox is a pop inbox with many messages in it. The other is an imap inbox. If I am working at say, message 2000, in the pop inbox, then switch to the imap inbox, and later switch back to the pop inbox, the inbox view is inconsistent. If there is a new message in the pop inbox when I switch back, the view starts with the newest messages including the new message. If I switch to the imap inbox and no more messages arrive in the pop inbox while I am working the imap inbox, when I switch back to the pop inbox the view starts at the oldest message (in my case #1 of 4900 - requiring a long scroll to get to the newest messages). This behavior is new in the version I am using (24.6.0) on a Mac (10.9.3) so apparently an update changed it. I'd like to always return to the bottom (newest) message when switching to the pop inbox, so if there is a preference setting for that, please let me know, I couldn't find one. Otherwise please fix it.

The first part of this response is regarding the volumn of emails int he Inbox folder. I'm writting about this (although it is not your query) because I would not like to think you could lose all your emails.
I would strongly recommend that you do not save all of your pop emails in the Inbox folder, as it is designed to be an Inbox for incoming mail and not a general store.
You may see a folder in the FolderPane, but in reality your emails are stored in mbox files. Emails are downloaded and stored one after the other in the order downloaded. So, at this moment, you have one single mbox text File with all of your Inbox emails written one after the other into a single document.
Recommend you create some folders and manage your emails.
After sorting them out, you could compact the Inbox to remove any 'marked as deleted' emails.
When you delete an email, from your point of view it goes from Inbox to Trash. In reality it is still in the Inbox, 'marked as deleted', so it is still using space. When you compact your Inbox it removes those 'marked as deleted' emails.
If any corruption occurs in that file eg; TB cannot detect the end of a 'marked as deleted' email, then it may end up deleting a load of emails.
So I would not compact (a task that should be done on a regular basis) until you have organised your emails into other folders:
See info on how to maintain a healthy Thunderbird and compacting - why it is so important.
* http://kb.mozillazine.org/Keep_it_working_-_Thunderbird
* http://kb.mozillazine.org/Compacting_folders
'''Re; List of emails - view the recent incoming mail.'''
I would advise you have the most recent at the top, then you do not need to scroll. This option works in much better way for instantly locating new mail.
Click on the 'Date' column header to reverse the order.
or View > Sort by > Date and descending

Oi vay! a mac thats too slow to use DVDs, quicktime, imovi,

OI VAY!!I believe I was sold a mac, by a mac expert nonetheless, that is far too slow and lacking in memory to watch videos in any form, dvd, file, with quicktime, etc.
And it seems too old for the updates available.
its a iBook G4
version 10.4.11
processor: 800 mhz (slow!)
memory: 640 mhz (low!)
Can anyone pls confirm or tell me otherwise please!?
thank u all or any replies most appreciated!
m in berlin

The computer should be able to play DVDs, if it has the correct Combo optical drive,
(and not a CD-RW basic drive) and the RAM can be increased to 1.12GB by adding
a chip under the keyboard in the upgrade slot there.
All in that series should have been able to play DVD media and record/play CD media.
You can find more specifications about portable Mac and others by getting the
Mactracker download from http://mactracker.ca and note the iBook (G4) info.
According to this ^ database (free download) the RAM max is over 1024MB.
Early iBook G4 tech specs: http://support.apple.com/kb/SP89
The software updates for Tiger 10.4.11 should appear when you run Software Update
from the menu which appears when you click on the Blue Apple in left side menubar.
You could also get the items which appear in there, direct as stand-alone installers
from Apple Support downloads online (good for later re-installs, if necessary, if saved.)
Not sure what the problem really is, in regard to the computer. There is a DVD Player
which should launch automatically on insertion of DVD media; in System Preferences
you can choose how media discs are handled in the appropriate Preference panel.
Note, you may have to buy an iLife version suitable for the computer you have, and
due to technical differences in the older 800MHz iBook G4 vs some latest models,
the iLife 09 may have specifications unsupported in the hardware of that computer.
iLife 06 is better suited for older G4 Macs, and that is a retail installer disc. You may
be able to get one in the second-hand market. Tiger 10.4 retail disc itself does not
contain an iLife version, as that was a separate disc. Computers that shipped with
Tiger 10.4.x included extra software and they had an iLife version, plus AppleWorks.
You can see a DVD without iLife installed, DVD Player should be in Applications folder.
iLife '09 Support: http://www.apple.com/support/ilife/
So, perhaps the alleged expert may have omitted something or the other in discussion
of the computer; ideally, the best iBook G4 would be the last edition 1.33/1.42GHz 12/14".
Hopefully this helps a bit.
Good luck & happy computing!
edited.

Mac working too slow when switch to one to another user acconut

Similar Messages

Maybe you are looking for