MacAir burning CD by remotely using another person's Mac Pro's CDRom

Dear All,
I am using my MacAir with my iTuens and its account to organize my music. Now I want to burn a CD, but I don't have a CDRom with my MacAir. So far, I have been using my home Mac Pro's CD to import music from CD. Yet, I am wondering if I can use my Mac Pro CDRom to burn a CD from my iTuens Playlist in my MacAir notebook, you know, remotely using another person's CDRom.
Thanks in advance.
King

Keep the temperature down, usually by boosting the lowest default fan speed to help.
Also FBDIMMs on Amazon I have run at 59*C versus the 72*C+ of prior modules so adding less heat into the system.
There are kits you can modify the card's fan and add copper heat sink pipes. You may be fine and not have to buy a new card and continue with the 8800GT.
The X1900 was a huge problem with dust and therefore with heat and making the fans work harder - but never able to cool the interior, so the card had to be removed and dust inside the card's chamber 3-4X per year.
My Mac Pro 1,1 even without the X1900 would warm up the area during winter after 3-4 hours of use - the exhaust on these is very hot. So monitor the temps and fans and I would install SmcFanControl - I have always had it since 2007 to keep the fans default at 800-900 rpm along with Hardware Monitor (or use another) to monitor all the system sensors.

Similar Messages

TS2998 Help! My Mac mail uses another person's name in stead of mine in the "from" heading when trying to send e-mail. How can I fix this?

Mac mail started using another person's name instead of mine. In the "From" line it shows someone other than me so the receipient will not know I am sending them an e-mail. HELP!, This is crazy. Is there a fix?

Does this problem happen EVERY time you send an email?
Do you see the wrong FROM entry before you hit the send button? Or does the recipient report seeing another name other than yours?
Do you recognize the incorrect name being shown? Is it something you or someone else using your machine have ever used? Is it a name you have never heard of before?
Go to your SENT folder in Apple Mail. What do you see when you open one of your SENT emails, in the FROM slot? Is the name correct or incorrect?
Also, I don't understand your comment "I noticed it when I try to send a link via e-mail to another person." are you saying that when you paste a link into an email to someone that your name in the FROM field changes? Where are you putting the link, in what place in the email?

My iPod 5th generation charger doesn't work but it says it's charging. When I use another person'a charger, the iPod charges fine. Has anyone had this problem?

My iPod 5th generation, The charger doesn't work but it says it's charging. When I use another person's charger, the iPod charges fine. Has anyone had this problem?

Yes, the Lightning cables do fail sometimes. They are covered by the same one-year warranty as the iPod
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I was running remote desktop on my old mac pro running 10.4.11. Upgraded to new pro running 10.6.7 Can I get remote desktop to run on new computer?

I was running remote desktop on my old mac pro running 10.4.11 Just upgraded to new pro running 10.6.7 Can I get my previous remote desktop to
run on new computer?
Thanks

Are you talking Apple's Remote Desktop software, or Microsoft's?

I recently purchased a new Mac Pro and have been trying to back it up on my Time Capsule for the first time. However, it says there is no available disk space. This time capsule was used with my old Mac Pro that had a Home vault open on it.

The time capsule was used with my prior Mac Pro laptop that unfortunately had the home vault active on it.
My new Mac Book Pro does not have home vault open. But I am unable to back up my new MAC pro laptop because it says there is not enough storage space available. Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
When I go into the time capsule - it shows me NOTHING as being in the backup datas. So, I don't know where to begin to delete all the old data off the
time Capsule and start with a completely empty machine.

Therefore, t there any way to just completely delete all the old backup data out of my Time Capsule from my prior Mac Laptop?
Here is how to do this:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon at the top of the AirPort Utility window
Click the Disks tab below the icons
Click Erase
The "Quick Erase" option will only take a moment or two
Now you can backup your MacBook Pro. If you connect an Ethernet cable from the MBP to one of the LAN <-> ports on the TC, the first backup will go 3-5 times faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will only take a few minutes

MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image "/Volumes/Data/Jerry Booher's MacBook Pro.sparsebundle" is already in use." error when Mac Pro tries to back up

MacPro backed up to Time Machine, added Mac Mini now get "The backup disk image “/Volumes/Data/Jerry Booher’s MacBook Pro.sparsebundle” is already in use." error when Mac Pro tries to back up

It is standard Mountain Lion error due to the networking ability which is comparable to wet string. (actually that was lion.. it dried out some with Mountain Lion.. higher in the hills perhaps!!)
See C12 and C17
http://pondini.org/TM/Troubleshooting.html
But many people are suffering the same issue..
And the above is even a little out of date.. you might need to do a reset to the TC.
Welcome to Apple's beta program for everyone.

Is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

Only if you move it to an external enclosure and let them both access it through a file server.

I installed windows8.1 using bootcamp4 on a Mac Pro. How can I upgrade to Bootcamp5?

I installed windows8.1 using bootcamp4 on a Mac Pro. How can I upgrade to Bootcamp5?

bootcamp is
a bootloader
a setup program for osx
and a set of drivers for mac hardware for windows
http://support.apple.com/kb/dl1638
this is pretty much the zip file that contain what bootcamp 5 is

What operating system we can use documentations like Microsoft MS office or can is used MS office in Mac pro notebook

What operating system we can use documentations like Microsoft MS office or can is used MS office in Mac pro notebook?

MS Office '11 for Mac: Mac:http://www.microsoft.com/mac/products or http://www.apple.com/iwork/pages/, or http://www.libreoffice.org/, or http://www.neooffice.org/neojava/en/index.php, among many others

What should I format my wd external hard drive to to use with my new Mac Pro?

What format should my wd external hard drive be in order to use with my new Mac Pro?

If you're going to use it only with Macs, use Mac OS Extended (Journaled). It's the fastest filesystem to use on Macs.
If you're going to use it with PCs and Macs, use exFAT or FAT. I recommend exFAT because it hasn't got limitations as FAT and it's faster, but you need Windows XP Service Pack 3 or later to use it on PCs

If i used parallels in a mac pro take 16 ram is useful?

if i used parallels in a mac pro take 16 ram is useful?

erik193,
in Parallels Desktop, you’ll need to divide your RAM between your host OS (OS X) and your guest OS (e.g. Windows). How much RAM you should allocate to the guest OS will depend upon what you need to do in the guest OS.

Time Capsule remotely using Back To My Mac with iPhone.

I'm connecting my Time Capsule remotely using iCloud - Back To My Mac. It's possible to make the same connection using my iPad 2 or my iPhone?

What is the exact model of your modem?
Do you use pppoe authentication in the modem.. If so you can just bridge it and use pppoe in the TC without any issues.
Apple cannot be expected to fix every modem and every ISP out there. Unfortunately networking is done is so many ways that it is impossible.. the ISP is actually the one who should help but they generally are useless.. or want you to pay for support.
Yes, send pics of the configuration.
Are you getting a public IP from your ISP? If not then none of this will work.
How are you testing access? You cannot test from inside the LAN .. you must use a Mac computer from internet access that is not firewalled.
Remember this is a two way street.. both ends have to have full access.
If the BTMM approaches doesn't work do try it manually..
There is clear instructions on the web to setup access.
See http://gigaom.com/2009/05/14/access-your-time-capsule-over-the-internet/
You don't need to do the fancy scripting.. just setup your modem router to forward port 548 to the TC.
You don't give wan access in this case... you are accessing on LAN.
But you do need to use some more security than normal TC password.. ie use disk password.
This is proof of concept.. if this works then BTMM should work if you get all the settings right.

Using AutoCAD on a Mac Pro

I was a devoted mac user all through college. (I even had one of those old macs with the 9in mono screens - LOL), but had to switch in the late 1980's because as an engineer using CAD software I was forced to go PC. I have been a pc user ever sinse because I must run AutoCAD. Can I load and run this software on a macbook pro laptop? And If so, I would appreciate some feedback from someone with "real life" experience doing this to tell me how well it actually performs.
Please help me... I really miss my mac and would love to switch back.

I only run PC and Mac Pro, haven't touched a laptop in 14 yrs. but.... if you can run CAD on a PC laptop, you should be able to on a MacBook Pro.
By your title "on a Mac Pro" that to me suggests on the workstation, not MBP at all. And of course any 8-core 16-32GB RAM and graphics card of your choice wouldn't be an issue.
The question is whether you use XP Pro and are stuck in 32-bit OS or whether you need or want Windows 7 or Vista 64-bit as a Mac with its EFI type BIOS means you have about 2.8GB RAM available.
The other issue with running Windows on Mac is Boot Camp allows you to put Windows partition on the slower end of the disk platter. You don't need to have Mac OS on the internal drive, or you can make it as small as you want.
And running AutoCAD does get mentioned, more often in the Boot Camp forum.
http://discussions.apple.com/category.jspa?categoryID=237
http://discussions.apple.com/search.jspa?objID=c237&search=Go&q=autocad

How much memory can Premiere Pro use on a new Mac Pro?

I'm ready to upgrade memory on my Mac Pro Late 2013 6-core. Does PP CC 2014 have a limit on how much RAM it can use? Some apps never use more than a certain amount, so I don't want to buy a lot of memory if PP will never put it to work. (I made that mistake when I was an FCP user.) Is there a limit and if so, what?
Also, are there any Mac Pro users who have an opinion on optimum RAM? I currently have 16GB (4x4GB) with 10GB reserved for PP. I am in the middle of a very large project and have noticed some irregularities and spinning balls. I assume that they are from memory shortage since quitting all other apps and restarting PP seems to fix the issue.

Not a Mac expert here ... but I do know there's folks running 64G ram and so going up from 16 will work fine. Now ... as to which is the "choke-point" ... that's a bit more techie than I can answer off the bat.
The Adobe video apps can put a pretty good strain on all of the computer's hardware, and "balancing" the assets of the hardware to the usage patterns of the software is always the trick. Memory never hurts ... but if the spinning ball is a video-ram problem, changing mobo ram isn't going to do much. The various areas they go into great detail on within the pages of the "Tweakers Page" (found within these forums threads, check the hardware forum) are of course, mobo, chip/s & cores, ram, disc in-outs & arrays/layout of project/footage & program files, video card & ram.
Your problem might be best solved by more RAM; it might be that it's a disc read/write issue and either more internal or eSATA II discs to spread read/write processes over would be best ... or taking an array of discs and using a fast multi-disk RAID array to speed things up even faster, or a video card upgrade.
So ... where you might want to go is the the Hardware Forum and give your computers complete specs, including disc layout and usage, and see what folks there think needs tweaking.
Neil

How do I get rid of random screen flicker and black screen when using a late 2013 Mac Pro with a 4k Samsung 55" Display?

I have a new Mac Pro late 2013 and a 55" 4k Samsung display connected using an HDMI cable. For the most part the display is amazing, however, I get occasional screen flicker and black outs. Can anyone help? Could I possibly have a bad video card?

4K displays take more than half the bandwidth of a ThunderBolt Bus. So you may get better results if you are careful to place them on their own Bus. This article has the explanation of which port is using which Bus:
Mac Pro (Late 2013): Using multiple displays

MacAir burning CD by remotely using another person's Mac Pro's CDRom

Similar Messages

Maybe you are looking for