MacAir- Wifii "connected" no loading or "time out" errors
I have a MacAir and all of the sudden the Wifii wouldn't connect to the wifii server at school.
Other students were having no issues. It would say "time out" error.
Then it would connect to the guest network and full bars would show but wont load any pages.
My ipad is able to connect normally. Therefore it must be my OS on the MacAir.
If followed other support threads and reset the network but still having the same issue
I really need to get this fixed if possible, any help would be appreciated. Thank you~
Hi aimomo!
I have a few articles here for you that will help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
http://support.apple.com/kb/ts2296
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Safari 6 (OS X Mountain Lion): If Safari can’t open a website
http://support.apple.com/kb/PH11883
A few of these articles are for specific circumstances related to loading pages in Safari, but I thought they may be helpful if it seems like your issue is similar to what is described in the articles. Thanks for being a part of the Apple Support Communities!
Regards,
Braden
Similar Messages
-
Connection time out error in server proxy
Hi
My scenario is file to proxy. . It is synchronous scenario.
I am giving wait time as input and in the proxy i wrote a code to wait till the inputed value and after that send a response. it is working fine only if i give less than 60 sec.
If i specify above 60 sec i am getting the connection time out error in SXMB_MONI.
Please help me to solve this.
Regards
DiviaTo increase Timeout use
Go to transaction SMICM........ Goto->services......choose HTTP.....edit this service.........increase maximum processing time and activate this service
look blog for timeouts:
The specified item was not found. -
Connection time out error in HTTP
Hey guys
i m getting connection time out error in a HTTP scenario,when i go in SXMB_ADM i dont find any entry with the name HTTP_TIMEOUT.
even in RZ10 i cant find the correct profile parameter.
i m taking help from michaels blog
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
i m on PI7.0 SP09
is there some other place i can find this entry? or do i need to ask the basis guys to add it?
thanx
ahmadAlso, there may be other factors to consider depending on your scenario. If you don't have it already, look at the latest <a href="http://service.sap.com/~sapidb/011000358700005909032005E/XI30XI70_TroubleGuide.pdf">XI Troubleshooting Guide</a> - Section 9.2 on "Timeouts in XI".
Regards,
Jin -
Hello sir,
Whenever i install addon on SAP B1 i get connection time out error can anyone help meManish,
it depends on how you set your connection. it must be through command line argument. if you have set your connection string as
sConnectionString = "0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056"
then change it to
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
and give the connection string 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as your command line argument in project properties -- Debug tab. prepare the addon ard and try installing it.
regards,
Binita -
SOAP Adapter: Connection time out error
Hi Guys,
I do it one scenario for Proxy to webservice Asynchronous . I have send the input details through Proxy. In Sxmb_Moni shows success message. But Receiver side doesn't reach the payload. Because receiver side (Soap Adapter) shows connection time out error. But i have given correct URL and SOAP Action in receiver communication channel. Please give some suggestions to solve that issues. Please don't refer links.
Thanks & Regards
Vijayhi
this is a time out error
increase the timeout value by specifying the parameter
XI.Timeout in the module parameter of soap Adapter
OR
1. This is because of TimeOut. The default timeout value for synchronous calls is 5
minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of
the SOAP adapter. The value must be given in milliseconds. For example, value 600000
represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
2.The Other Options is send the queue id with your request message.
http://host:port/XISOAPAdapter/MessageServlet?channel=p:s:c
&version=3.0&...&QueueId=xxxxxxxxxxxxxxxx
where xxxxxxxxxxxxxxxx is an ABAP queue ID.
3.Check your RWB message monitoring.
Is there any system failure message and holding message be there.
If then clear the messages.
4. Increase the time out parameter for HTTP in your altova xml spy.Defaultly it will be very low. -
HT4634 Why does my connection to email server time out on default port?
Why does my connection to email server time out on default port?
Hi there,
There may be a conflict between the network settings and your devices. I would recommend taking a look at the article below and comparing that to your routers current settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
-Griff W. -
Time out error on deploying to SAP-J2EE engine.
I got a problem while deploying to SAP-J2EE engine using ant. It takes a lot of time and then throws a time out error.
The problem is with the web.xml file pointing to a DTD in the internet, I have pasted some part of the web.xml below,
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>MyPay</display-name>
<description>MyPay</description>
Once I write down the DTD description in the web.xml itself, it works fine.
I have pasted the error trace below,
j2eedeploy:
[echo] Deploying to Local environment...
[echo] C:\Java\Projects/MyPay/dist/MyPay.ear
BUILD FAILED
C:\Java\Projects\MyPay\build.xml:445: java.lang.RuntimeException: ERROR: ID90507: Error occured during getting EARDescriptor : Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
Exception is :
java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148)
at com.sap.engine.lib.xml.parser.XMLParser.scanDTD(XMLParser.java:1271)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2795)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:120)
at com.inqmy.services.servlets_jsp.descriptor.jar.WebWar.getWebDescriptor(WebWar.java:98)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.loadDescriptorFromFile(ExtendedEarReader.java:175)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.getFullEarDescriptor(ExtendedEarReader.java:104)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:355)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:325)
at com.pg.sap.deploy620.SAPDeploy620Manager.process(SAPDeploy620Manager.java:84)
at com.pg.ant.tasks.j2ee620.J2ee620EngineDeployTask.execute(J2ee620EngineDeployTask.java:40)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)Thanks for your reply Kalyan,
The problem seems to be with my system, because I had run the same ant script in another system and it deployed successfully.
The problem does not seem to be with the dtd, whereas it seems that the SAP-J2EE engine is not able to open the link to the dtd giving a time out error.
Is it possible to switch off the validation process of the SAP-J2EE engine of an xml with the dtd? -
SoA Couldnt start- Time Out Error
Hi,
My oracle SOA version is 10.1.3.1. I have created a application ( say sampleApplication) in jdeveloper (webservice from wsdl). When deploying the application to the application server it takes a long time to complete (approx 30 mins) but it gets deployed without error. I got a perm gen error and I stopped the SOA. When started it again after incresing the perm gen size, the SOA couldnt start. Got the following error
<ERROR> <collaxa> <ProcessJob::execute> Attempt (1/15) ... failed to connect ... retrying in 5 seconds ...
<2009-09-11 17:55:13,130> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://myURl....
Maximum attempt of 15 was reached and the SOA failed to restart.
After playing around with the server.xml (trying to remove all application entries and adding it one by one) found that when i removed the sampleApplication's entry from server.xml and tried starting SOA , it worked and it Started fine.
Can any one point what might be the problem in my case.?
Thanks in advance..
(P.S: The other application deployed are developed in the same way as that of sampleApplication. So couldnt see any thing wrong with the sampleApplication. Other application entries in server.xml do not create this problem.)
Edited by: user8655700 on Sep 11, 2009 7:03 AMHi James,
Thank You for your suggestion. I have some doubts.
1) You suggested to revert back to old parameter and restart jDEV. What is the parameter i need to revert? I have only changed the max,min and perm size in opmn.xml because I keep getting perm gen error quite often. Did you mean those parameters ?
2)Restarting jDev will solve the issue of longer deployment time for applications. But when I restart the SOA itself, it fails to start.I get the Time out error. On removing the application which took longer time to deploy from server.xml, SOA starts without error. No other changes have been made. So the question is why is the application which is successfully deployed from jdeveloper like many other applications stopping the SOA to start.?
3)Or is the load during SOA startup is high, which results in it failing to start? If so how can I overcome this issue.
Thanks,
Ananth
Edited by: user8655700 on Sep 14, 2009 10:25 PM -
Hi,
We are trying to invoke a Web Service from BPEL Process (10.1.3.3.0) and we received below time out error message in em console.
</part></Invoke_1_setJobPostingXML_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Read timed out</summary>
Problem here is this error is not coming for all the invocation. For ex. We have posted the input payload at 3:15:34PM today and it thrown an error at 3:45:12 PM with above message. Also its not huge load hitting their server as we are calling the webservice once in 4-5 mins and if we repost the same message, its posting without any issue. This time out error comes 4-5 times daily and want to understand why it occurs everyday.
1. Will BPEL receive an error if we post huge payload to web service?
2. Do we need to set some waiting time to receive the response after posting the data to Web service?
3. Other possible scneario's for timeout error?
Thanks,
SaravanaHi Saravana,
It's likely to be a problem at the remote side or a network latency/communication problem...
How can you affirm "its not huge load hitting their server"? Your service may not be the only source of load...
Cheers,
Vlad -
WIH 00013 time out error while viewing a BO Web intelligence report
Hi,
I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
Please let me know if there is any other way to resolve.
Thanks!
Edited by: Satya Suma on Mar 9, 2011 1:31 PM
Edited by: Satya Suma on Mar 9, 2011 2:00 PMHi Suma,
These links may be helpful to you:
WIH00013 - Invalid Session
WIH 00013: Invalid session
All the Best,
Madhu.... -
Time out error while running the FR report on Workspace
Hi,
We are working on Hyperion system 9.3.1 financial reporting with Essbase as a data source.
We have built a report, which has many computation, conditional formatting, suppression condtion.Report has around 100 columns.
Now when we are try to open this report on workspace, report is throwing the "Server time out" error meassage. error meassage is-
"The requested item could not be loaded by thr proxy. Timed out".
Reports are opening fine with less data or if essbase cube doesn't have any data.
Please suggest us on this issue. Do we need to set any setting at Essbase level or workspace level or any other way.
Any help will be appriciated.
Thanks & Regards,
Mohit JainI would suggest by saying that 100 columns seems quite a lot, you mention there are many computation columns, these should be pushed back onto the server to calculate.
We have also experienced issues where reports we pulling back lots of columns that were dynamically calculated.
To narrow down the actual problem you can try the following, the see if the report runs with the change, if not continue with the next steps:
- remove all formatting from the spreadsheet;
- remove all calculations from the spreadsheet;
- see if the report can be built more efficiently, by moving items to Grid POV or using same as, or reordering dimensions in inverse outline order;
If it still doesn't run, then try removing columns until it can run.
Cheers, Iain -
HTTP time out Error in BPM.....
Hi
Error Description:
We have created a Sync-Async Bridge BPM scenario in XI.
In the BPM scenario we are calling the web service, and if the response from the web service is an error message then we have retry in a loop up to 24 times after wait for every 1 min.
We are sending the data to the web service using a proxy created in the R/3 system.
We are getting the time out error in the R/3 system.
We have changed the following parameters in XI.
In SXMB_ADM of XI we have set the value for the following parameter.
Category parameter current value
SA_COMM CHECK_FOR_ASYNC_RESPONSE_TIMEOUT 120
In SXMB_ADM of R/3 we have set the value for the following parameter.
Category parameter current value
RUNTIME HTTP_TIMEOUT 120
When we put the value as 120 for the above parameters and we try for 2 times in the BPM process, then it is sending the response back to the R/3 system after completing the whole BPM process.
But when we increase the no of retries in the BPM process then it is not sending the response back to the R/3 system in the same way, at that time we are getting the error in SXMB_MONI of R/3 system as given below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Inbound Message
-->
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="500" p2="Timeout" p3="" p4="">HTTP.HTTP_STATUS_CODE_NEQ_OK</SAP:Code>
<SAP:Text language="EN">HTTP status code 500 : Timeout</SAP:Text>
</SAP:ErrorHeader>
Please provide the solution for the same.
Many Thanks
Rinku GangwaniHi Prateek,
Thanks for your replay. I am able to open the URL from XI/PI.
I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
Error is:
In MONI:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
In RWB:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
What could be the reason?
Regards,
Venu -
Transaction Time out error in EJB while using Websphere Application Server.
Hi All,
I am using Websphere Application server and getting the transaction time out error. By default the transaction time out is 120 second. I am using session bean for doing a set of transaction. These set are dynamically generated. Is there any way to set the transaction time out for only this session bean to infinite ?
Thanks in advance
VivekHi,
According to WAS 6 , every opened connection has to be commited (or rolledback) explicitly (didnt try autocommit) before closing. Even if all you have done with that connection is a SELECT Query.
This has apparently solved the same problem I was getting. implement it and see whether it helps you. -
Time out error in receiver soap adapter
Hi,
My scenario is file to soap file with out BPM.I am using a currency converter wsdl.
I am getting a time out error in soap receiver channel.
Do i need to change the time out parameter?Where do i change that?Please help me to solve it out.
Following are the errors in the soap communication channel.
SOAP: call failed: java.net.ConnectException: Connection timed out
SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: java.net.ConnectException: Connection timed out. Setting message to status failed.
Regards
DiviaHi Prateek,
Thanks for your replay. I am able to open the URL from XI/PI.
I tried by testing the same URL by using XI 3.0, its working fine and i am getting required data, but in PI 7.1 i am getting an error.
Error is:
In MONI:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection refused: connect
In RWB:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect
What could be the reason?
Regards,
Venu -
Hi all,
We are facing a time out error uisng webdynpro.
The webdynpro application is mapped to the enterprise portal for the users.
When ever the users loads the application and first click on the link then again loads the application and click any link(as clicked previously) then the application returs time out error.
I am little confused as not known the error is a portal one or webdynpro error.
Requesting experts for a say on this.
thanksHi,
You can try this...
Re: TimeOut
Cheers,
Kris.
Maybe you are looking for
-
Continuing problems with broadband connection. Goe...
Our broadband has continued to have problems even though we called BT and had it tested for 24 hours. Still goes offline.
-
Hi, i would be thanksfull fi anyone would tell me, how to get the value from the count sql-statement using jstl.. the tags should look sth like this: <sql:query var="getUser" > SELECT COUNT(Row) FROM table </sql:query> <c:set var="count" value="${get
-
var MyTrustedSaveAs = app.trustedFunction(function(?) app.beginPriv(); this.saveAs("Something"); app.endPriv(); I would like to save my adobe form name and I want to use code I have there. Can someone tell what should I but there where I have ?... I
-
Cf builder 2.0.1 has MS SQL 2008 connection error
when i try to create Apptacular generation with Mssql 2008 and msAccess : on CfBuilder2.0.1 An Error has occured. Message:Element IDENTITY.IDENTITY is undefined in a CFML structure referenced as part of an expression. Details: this issue writte
-
What is a great video card that supports GPU acceleration?
A customer of mine wants to speed up his Adobe Lightroom 6 setup. He has various SSD's, and is ready to upgrade his graphics card to take advantage of the GPU acceleration found in LR 6. I was wondering if there was an up to date list of suggested,