Macally's Megacam problem when used with OS X 10.9

Mavericks detects the Megacam as a USB device and iMessages uses it but I cannot find any software or driver which lets Skype recognize it.

PepjvtI have installed Maverick 10.9 and I had problems with Mail.I changed the number of ports , I put number 110 and in the other I put 25 and it worked .Depending on the server you have you could ask for some information.

Similar Messages

Line Graph Problem when used with Series

I am facing a problem with Line Graph in Oracle Reports 10g.
I have made a graph having series of three curves.
The graph is perfect when all series have similar X-Axis values. See the link
http://www.sysautomation.com/ask/RPT_LINE_GRAPH_OK.PDF
But same graph does not print curves properly, gives spaces in the curves, when all the series do not have similar values on X-Axis
http://www.sysautomation.com/ask/RPT_LINE_GRAPH_NOT_OK.PDF
Pl. guide me what to do to make this graph working.

Thanks for reply.
In my case, I have to plot curves.
and some Series have different X-axis values.
I have no choice, but to plot them.
The same thing was working fine with Reports 6i + Graphics 6i.
What is Scatter Plot?
Thanks again.
This is a limitation in the current line graph in
Reports 10g (9.0.4). I can't recall whether this has
improved in 10.1.2 or it was planned for the next
rev.
Would trying a scatter plot be better?
Line graphs are normally meant for regular intervals
on x-axis, so using the example of dates, Jan, Feb
and Dec would be placed right next to each other,
rather than scaled with the right distance between
Feb and Dec.

Transform Effect problems when used with 3D layer's depth

Here is my set up.
I have PreComp with graphics illustrator imported layer with continuosly rasterise enabled.
This graphics has a reflection underneath it. I made the reflection by applying Transform effect, setting offset to -100 and adjusting the Anchor point.
As far as graphics move left to right (X,Y) there is no problem and Anchor point is in its place.
As soon as I make the layer 3D and start changing depth values the reflection starts to jump around.
My guess is - it happens because anchor point is a constant value and since reflection is based off its value it does not follow the base of the graphics. Purhasps there is a code snippet which need to be used to link the Anchor Point value to the Zoom Value? Adjusting Anchor point values with key frames proved too difficult.
In another words I would like to keep the reflection at a constant distance from the base of the graphics and once the graphics move out or in the reflection does not follow.
I PreComposed this graphics and imported it into the new Compostion and applied XY and Z movement using camera and Null layers. It was the same effect and reflection did not stick to the base of the graphics.
I need to keep Collapse Transformation enabled on all the consecutive Comps/PreComps to make sure the vector art renders at high quality.
What would be a proper way to make a reflection of a 3D layer/preComp in the Comp where movement controlled with Camera and Null layers, with Continuosly Rasterise/Collapse Transformations enabled?

Great! At least I know not to spent my time in a wrong direction.
Two questions:
Do I need to enable "Collapse Transformations" in the final rendering Comp in order to keep "Continuously Rasterize" settings within the nested PreComps enabled (for illustrator files rendering sharp). I have a few nested preComps and originally activated "Continuously Rasterize" throughout the project in all of them.
"How" to create reflections seem clear from your comment. Do not use any effects but rather create a copy of a layer I would like to have a reflection of and scale it to -100. "When" seems to be a mystery. Should I apply reflection in the very first preComp or very last or the one where I create all the major animation for my graphics?

Problem when using with native document as cdf

Hay all,
I am trying to use native document as cdf in the simple way without define any converters.
I have a placeholder in my page that has been asigned to native document.
My goal his to display a native documant(like word) as web view html.
My problem his that i got this error:
" Caused by: oracle.stellent.ridc.protocol.ServiceException: Unable to download 'ERANTEST'. Failed to export document 'ERANTEST' using template '(null)' and layout '(null)'. Export process: 'hcexport' "
Can anyone have an idea for this problem?
Note: i have another application that running in a different enviornment that work fine except hebrew problem.
Thanks,
Eran z

Hi Eran ,
Root cause for this issue :
In a windows based cluster environment intradoc.cfg had weblayout and vault pointing to the UNC path of the shared file system . This is a known bug / issue with the cluster environment where in indexer would fail .
Here too the same issue was causing the issue where in the files being checked in are failing to get indexed due to the UNC path set for weblayoutdir and vaultdir values in intradoc.cfg .
Solution :
Map the shared file system to a drive letter like Y:/weblayout and Y:/vault .
Use these values in weblayoutdir and vaultdir in intradoc.cfg and restart the server.
After the re-index the entire collection to resolve the issue .
Thanks
Srinath

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks Pete

Hi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete

Problem when using About Operator in Contains Query

Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id           NUMBER(10)      NOT NULL,
name         VARCHAR2(200)   NOT NULL,
description VARCHAR2(4000) NOT NULL,
price        NUMBER(7,2)     NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
      1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
      1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
      0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
      0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AM

Hello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!

Coercion problem when using Shared Variable

I have a curious coercion problem when using Shared Variables. I want to share the state of a State Machine, which is an enum saved as a control (typedef) called TYPE State (see attached). I create a shared variable called State and define it as a Custom Control, using the just-mentioned typedef. So far, so good. I've attached three simple VIs -- the first one, Init State, simply wires a constant to the input of the Shared Variable to initialize it -- the wired constant is, of course, defined by the typedef. However, the Get State and Set State, meant to wire an indicator (for reading the state) or control (for setting it), develop coercion dots when wired into the Shared Variable. Why? How do I get rid of the dot? [I suppose I could abandon my typedef and custom control, but the beauty of typedefs and custom controls is that it "enforces" rules, lets you use enums for clarity, keeps the code "honest", etc. -- I'd hate to give that up just to get rid of a dot!].
On a related note, the code seems to work. This is much too simplistic to do anything, but if you open Set State and Get State, set the state to anything, run it (it immediately stops, of course), then run Get State, you'll see the chosen state appear in the indicator. So it does appear to work. The "error" (coercion dot) may, I suppose, be a "bug" in Labview because it can't figure out the mapping of the (very simple!) Custom Control, but if so, I hope it gets fixed quickly!
Bob Schor
Attachments:
Coercion Problem1.zip ‏38 KB

Hello Bob,
I am also seeing this behavior, I will escalate this question to our LabVIEW developers and post again here no later than next Tuesday, November 27th as National Instruments will be closed for the remainder of this week.
If this issue does turn into a product suggestion, I would suspect the workaround would to live with the coersion dot for the time being.
Enjoy the holiday
Regards,
Erik J.
Applications Engineer
National Instruments

Problem when using IE9

We use IE9.
I enter in https://gwserver.
Compose New mail (in Plain Text mode) with body:
Line-1
Line-2
Line-3
And send this mail , for example to itself.
the received letter will look like:
Line-1Line-2Line-3
Someone has the same problem?
Serg

Are you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
Or simply tell your users to user HTML.
Todd Bowman
Todd Bowman
Senior Network Analyst
University of Minnesota Physicians
612-884-0744
[email protected]
>>>
From: MarkDissington<[email protected]>
To:novell.support.groupwise.2012.web-access
Date: 5/24/2012 6:46 AM
Subject: Re: Problem when using IE9
skoltogyan;2197344 Wrote:
> The solution is?
>
> Serg
I would guess don't use IE9 until a fix is released? :-)
M.
MarkDissington
MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
View this thread: http://forums.novell.com/showthread.php?t=455634

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. ge

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. get "authentication error". Sometimes will get a very quick dialogue box showing the gmail login screen but then disappears. I use firefox and IE

Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back

Problem when streaming with the CLI flash media encoder 2.5

I have a problem when streaming with Flash Media Encoder 2.5. When I run the GUI, everything works, but when I use the commandline with the same profile I have created using the GUI, it says it can't connect to the server.
I have to use this version of the encoder, because the other is not working with the server, and I have to create a program to remotely control the flash media encoder, so I have to use the CLI. What can i do to go over this problem?
Any help would be really appreciated. Thankyou.

First of all, thankyou.
There is no authentication needed. I can't use Flash Live Media Encoder 3 because it is not supported by the people which manages the server i have to connect to.
In fact, I don't know why they dont support it, but that is the way it is.
Through the GUI, i connect directly and without problems, without user/pass.
Thankyou again.

I encountered a problem when using Flash Player V9.0.115, can somebody help me?

Hello all, can somebody help me?
I have encountered a problem when using Flash Player
V9.0.115. Your help would be greatly appreciated.
The problem described as follows:
1. The flash file with sound works well before uploaded to
website. The audio lost when uploaded to the website(There is no
problem with the flash file size). I have uploaded the flash file
to website for you to test. Please go to
http://www.sameshow.com/democreator/create
a new site.swf and kindly check with it.
2. When we open the flash movie in IE with Flash player
V9.0.47 and previous versions (Flash9d.ocx), the flash movie with
sound works well.
3. When we upgrade the flash player to the latest version
V9.0.115 (Flash9e.ocx), the video works well, but the sound just
can play several seconds and then stop.
4. On Flash Player ocx V9.0.115. If we publish the flash
movie on web with 24fps, the sound just can work several seconds
and then stop, the problem is the same if we use the
TShockWaveFlash control to play the flash movie.
5. On Flash Player ocx V9.0.115. If we publish the flash
movie with 12fps, the sound works well but the quality is really
very poor. It seems that the sound plays shorter with more frames
per second. But the flash file works well with the Flash Player
V9.0.47 and previous versions (Flash9d.ocx).
Can somebody help me to figure it out? Thanks in advance!
Regards,
Sabrina
[email protected]

Hello Darren, I really appreciate your response. My mail is
[email protected] I have uploaded the flash file to our
ftp,
http://www.sameshow.com/democreator/create
a new site.swf. And also I compressed the original file to a
zip file and uploaded to our ftp at
http://download.sameshow.com/aff/create.zip,
please kindly check! When we playing this flash file on FlashPlayer
V9.0.47 and previous, the audio works well. But the audio just can
play several seconds and then stop when I playing it on FlashPlayer
V9.0.115. The garbled audio makes us very upset. Your help would be
great appreciated!
Sabrina Fu

I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Ulf Magnusson, Sweden

I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, Sweden

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Macally's Megacam problem when used with OS X 10.9

Similar Messages

Maybe you are looking for