MacBook 10.4.7 not talking to Windows 2003/Exchange server

Hi folks
Have a new MacBook 2GHz running 10.4.7, trying to talk to a Windows 2003 network at work. Services needed are Exchange server support (for Microsoft Entourage) and some shared drives over a domain on the Windows server machine. Experiencing problems with both!
Re. shared drives, browsing the network via Finder window sporadically shows up some or all of the Windows machines connected to the network, and the shared drive. It is possible to connect to some of the Windows machines directly, although this is inconsistent. However when attempting to connect to the shared drive, the alias appears correctly, but filling in the details (workgroup, name and password) just leads to an error message saying that the alias could not be found, with the option to delete or fix the alias. Fixing opens up another Finder window but the network is greyed out so you can't point to the shared drive!
Attempting to connect via Connect To Server, either by browsing or entering the smb address line, also allows one to enter the workgroup, name and password, but simply says 'could not connect to the server because the name or password is not correct' (even though it is).
Firewall is on but allowing Windows Sharing. AppleTalk is active. Connecting over a wireless network but ethernet connection seems to make no odds.
In terms of Entourage, the system simply wont find the Exchange server, which I'm presuming may be symptomatic of whatever is causing the above!
Any help/ideas/thoughts most gratefully received.
Cheers
Dan
MacBook 2GHz Mac OS X (10.4.7)

I hope this helps. But, Apple has confirmed a significant bug in 10.7.4 that breaks SMB. Their support says they are working on it, but they do not know when the fix will be released. It has broken SMB at all sites I support including my own location where Lion server has the updated version as well. Only AFP works but not consistently. The suggestion is to restore 10.7.3 from a backup or wait until the fix is released. SMB does work - but only when admin authentication is used on Mac servers - don't know about Windows Servers. I do know the client side of Mac's also are affected with SMB issues. Good luck!

Similar Messages

SGA_TARGET SIZE 3GB in 10g Release 2 server on windows 2003 E Server?

Is it possible to increase the SGA_TARGET greater than 3 GB on Windows 2003 Enterprise server(32-bit)?
OS version : Microsoft Windows 2003 R2 Enterprise Edition
Service Pack 2
Bit Version : 32 bit
Computer(SERVER) : Intel(R) Xeon(TM) CPU 3.60GHz
3.59GHz, 15.5 GB RAM
Physical Address Extension
DataBase Version : Oracle 10g Release 2 (10.2.0.1.0)

hi,
As suggested earlier , please go through following notes as it will help you understand the concepts clearly
Note:342080.1. This note talks in detail on how to use more than 4GB RAM on Windows.
Note:225349.1 Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
You can not set SGA_TARGET greater then 2.7 G on windows 32 bit machine. Yes , you can have SGA greater then 3 Gb but by using AWE which requires to unset SGA_TARGET and use db_block_buffers instead of db_cache_size.
-Amit
http://askoracledba.blogspot.com/

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

Windows 2003 Terminal Server, ZEN 7, and WSUS

Hi,
We're having a problem getting a group policy to "Stick" in Windows 2003
terminal server. The server(s) have the ZEN 7.01 agent installed per
the TID's for a terminal server. We believe we've set all the Group
Policies of the users that login to these systems, yet once they are
rebooted, the WSUS update server location resets to the default
(update.microsoft.com). This is set in gpedit in:
\computer configuration\administrative templates\Windows
Components\Windows Update
Is this settable in a user package, or should this be done in a
workstation package? If so, could we "force" the workstation package to
override the Windows Update settings for all users, regardless of what
user policy package they have?
Thanks for any ideas!
Greg

In the Properties of the WS Group Policy, there is an option to set "Loop
Back" so that the Computer GPO is set last.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Greg Palumbo" <[email protected]> wrote in message
news:rFFZk.5166$[email protected]..
> Hi,
>
> We're having a problem getting a group policy to "Stick" in Windows 2003
> terminal server. The server(s) have the ZEN 7.01 agent installed per the
> TID's for a terminal server. We believe we've set all the Group Policies
> of the users that login to these systems, yet once they are rebooted, the
> WSUS update server location resets to the default (update.microsoft.com).
> This is set in gpedit in:
>
> \computer configuration\administrative templates\Windows
> Components\Windows Update
>
> Is this settable in a user package, or should this be done in a
> workstation package? If so, could we "force" the workstation package to
> override the Windows Update settings for all users, regardless of what
> user policy package they have?
>
> Thanks for any ideas!
> Greg

I dream of running Dreamweaver on a Windows 2003 Terminal Server

I have a "volume" license and attempted to install Dreamweaver CS4 on a Windows 2003 Terminal Server. I get an error message right away indicating that the system does not meet the minimum install requirements, ie XP/Vista.
Adobe volume licensing team verified that it is the correct license for installing on a terminal server, but after one hour of what would a bad nightmare with adobe "no" support (Outsourcing issue, failure to grasp and process the basic error message) I got no where and am having to resort to the forums. I have googled on this and got no where and nothing on the search efforts on this site.
If anyone has an idea of what is going on, bug, wrong install media, please clue me in.
Thanks!

pziecina
Thanks for the information. We do have AppV here and tried that approach. While this gets us past the install minimum requirements, it does not resolve the issue of running of more than one instance at a time, per terminal server, even though our volume license allows for it.

Oracle ODBC Driver (Windows 2003 x64 Server)

Hi all
I have some trouble with this ODBC Driver ...
I have installed Oracle Client 10.2.0.1.0 with the ODBC Driver and SQLplus etc.
Now I have configured in the "Net Manager" some "Service Naming" as I did
on other servers before. Then I Test the connection in the "Net Manager" it
seams to work fine.
When I now try to connect in SQL Plus the following error comes up:
ORA-12154: TNS:could not resolve the connect identifier specified
I did already do this:
- Add "...\NETWORK\ADMIN" to the Path Variable of the server
- sqlnet.ora looks like:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
- tnsnames.ora looks like:
MyName.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myDomain.net)(PORT = 1521))
(CONNECT_DATA =
(SID = DBSIDxx)
What do I have to do to get this working ???
Thanks for any comments!
Best regards
Frank Uray

Nevermind, I think I'm to assume that this is the same as:
Re: unable to use SQL Plus (Windows 2003 x64 Server)

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server

Hello,
We are trying to install jwsdp-1_2-windows-i586.exe on a Windows 2003 Enterprise Server system, but unfortunately we are not able to do this.
Even worse the installation program simply stops without any message at all. So we have no clue how to proceed. Any help would be appreciated.
Greetings,
Erwin.

Yes,
I have attached the output, but the installation just stops..
Greetings,
Erwin.
D:\install>jwsdp-1_2-windows-i586.exe -console
Initializing InstallShield Wizard...
Searching for Java(tm) Virtual Machine...
Searching for Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Verifying Java 1.3.0 by IBM Corporation
Searching for Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Verifying Java 1.3.0 by Sun Microsystems
Searching for Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Verifying Java 1.3.X by Sun Microsystems
Searching for Java 1.4X by Sun Microsystems
Verifying Java 1.4X by Sun Microsystems
D:\install>

Is is possible to add Windows 6 64-bit drivers to a Windows 2003 print server?

We are having some trouble figuring a way in which to support network printing for Windows 7 64-bit machines that we are starting to intermittently put out in what, as of this moment, is still primarily a native XP 32-bit environment. Our concern has been that, if we replace the drivers on the print server to the Windows 7 64-bit drivers, then the XP machines will then pull down those drivers and then not be able to print any longer. According to Microsoft, the way around this is to utilize the "Additional Drivers" area within the properites of the printer. From there, in theory, you can add a new driver that uses "x64" as the print processor. However, when we attempted to do this on our legacy Windows 2003 print server (which I believe to be 32-bit) we noticed that, in the "version area" of the selection for the x64 print processor, Windows 7 is not listed. We then receive the following error message after we attempt to go forward and add the driver. . .
-Selected printer driver not found
The specified location does not contain the driver HP LaserJet 4050 Series PCL6 for the requested processor architecture
It looks to me that the problem is in that the server is Windows 2003 and we are attempting to make Windows 7 drivers work within that framework. Can someone please confirm this suspician or instruct us further?
Thanks,
-Brian McKnight

Gotcha!!
I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
Thanks everyone.
~ Narey

Satellite A100-906 PSAA9E: I cannot find drivers for Windows 2003 R2 Server

I found and installed some drivers from http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU
Look at the screenshots of my computer please.
"Device Manager" window:
http://www.disa.ho.com.ua/toshiba/1.GIF
http://www.disa.ho.com.ua/toshiba/2.GIF
http://www.disa.ho.com.ua/toshiba/3-1.GIF
http://www.disa.ho.com.ua/toshiba/3-2.GIF
http://www.disa.ho.com.ua/toshiba/4-1.GIF
http://www.disa.ho.com.ua/toshiba/4-2.GIF
http://www.disa.ho.com.ua/toshiba/5-1.GIF
http://www.disa.ho.com.ua/toshiba/5-2.GIF
How can I solve this problem?
ps: sound not working

Hi
As mentioned above you will not find Toshiba drivers designed especially for the Windows 2003 R2 Server.
But dont worry and dont give up.
The simply Windows XP drivers should be compatible and you should be able to install the Xp drivers on the Win2003 Server OS.
good luck

Locked files using a Windows 2003 File Server with Mac 10.6 clients running CS5

We migrated 40 Mac users from OS X 10.5/CS3 to OS X 10.6/CS5 back in November. Our InDesign files are kept on a Windows 2003 file server.
We have had fairly constant complaints of InDesign and Photoshop files being reported as locked when users try to save their work back to the server. This did not occur as frequently with CS3.
Has anyone else had this issue?

I'd suggest starting with iFelix's Sharing files between a Windows XP PC and a Mac running OS 10.4.x

IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtik

Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

Windows 2003 business server network printer - please help

A customer has a windows 2003 business server and several XP machines. I have put the driver on the server and shared it. Set up all the windows pc and print no problem. They have three mac osx and im stuck! I believe that ive installed the driver ppd??? and followed the instructions correctly!!! but when i print from the mac it just prints loads of garbage??? i think i need a postscript chip installed on the infotec2046 printer??? is there another way - please>>>

You should be able to use the HP Laserjet 6 Series driver included in OS X.
http://www.openprinting.org/show_printer.cgi?recnum=Infotec-IS2045

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

MacBook 10.4.7 not talking to Windows 2003/Exchange server

Similar Messages

Maybe you are looking for