Macbook 2, 1 battery issues and high CPU utilization

I haven't used my macbook 2 1 (intel core duo, 2.16GHZ) for 3 or 4 months. Before it was working fine but now it says that the battery is not charging, although the laptop still works when plugged in. The power report from the system profiler is at the bottom of the thread.
I use this computer primarily for music making using native instruments reaktor, but have found that the CPU utilisation of my patches has doubled compared to when I was using them 4 months ago. 5've not got any other programs open while doing this and all the audio set up is exactly the same as before.
Will buying a new battery sort this out? Any ideas for how to bring the CPU utilisation back to how it was before?
Thanks in advance to anyone who can help!
Battery Information:
Model Information:
Manufacturer:          DP
Device name:          ASMB016
Pack Lot Code:          0002
PCB Lot Code:          0000
Firmware Version:          102a
Hardware Revision:          0500
Cell Revision:          0102
Charge Information:
Charge remaining (mAh):          0
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          0
Health Information:
Cycle count:          462
Condition:          Replace Now
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          5524
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Automatic Restart On Power Loss:          No
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          No
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          15
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          15
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x00ba
Serial Number:          0x005a207d
Charging:          No

You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

Similar Messages

SCCM 2012 Agent and high CPU utilization.

We have numerous Windows workstations and servers running with very high CPU utilization. Services are slow to start and login can take an hour. The service running with high CPU is svchost.exe, we determined that it is Windows Management Instrumentation
that is causing high CPU in svchost.exe.
If we stop or uninstall the SCCM 2012 Agent, everything calms down on the computer.
Any ideas as to way this would be?

Same issue seen on a clients and KB2617858 resolves it. I am deploying using the App model no problem with x86 and x64 hotfixes with requisite OS requirements. Is there a way to configure to only apply to those that it applies to...if that makes sense. I
ask because my B&C x64 W7Sp1 image does not require it (I have not included it) whereas other non-B&C do - what's the condition or applicability (or non-applicability) if not as listed on the KB..! If I run it one W7 machine it says it doesn't apply
and isn't already, whereas another it installs..!
http://support.microsoft.com/kb/2705357:
To apply this hotfix, you must be running one of the following operating systems:
Windows 7
Windows 7 Service Pack 1 (SP1)
Windows Server 2008 R2
Windows Server 2008 R2 Service Pack 1 (SP1)
..obviously, if a client has the issue it applies :)
Donald Rumsfeld's 'known unknowns' comes to mind here. Sorry.

ITunes Match causing battery drain and high CPU load on iPhone 5(S)?

Hi.
I'm wondering if anyone else is seeing this — coz i see no such reports anywhere:
On my iPhone 5S, ever since iOS 7.0 (and continuing with 7.1), downloading songs form iTunes Match, downloading any album from Match is really slow, heats hop the CPU and drains the battery. (As ar as recall, all was fine under iOS 6).
Here’s steps:
i go to the Music app, tap “download all” for an album, or maybe a whole artist. The Downloading/Pending icons appear. Because status reporting is vague, i switch over to the iTunes Store app and its Downloads tab, which provides more info.
Here i see the first three songs downloading fairly quickly (i have fast WiFi), but once the progress bar reached 70%-ish, they go into Processing, and stay there for anywhere between 3 to 10 minutes. Eventually, they drop form the list (i.e. are done) and the spiel repeats with the next set.
While this is happening, my iPhone goes incredibly (“uncomfortable to hold” hot), and i can literally see the battery go down.
My iTunes library is largish, but not huge. i have about 17k songs, most of them iTunes purchased. (since Match has a limit of 25k *plus* iTunes-purchased songs, i’d expect 17k to be child’s play). On my phone, i have very few to no songs at all.
The other day, i completely reset my phone, didn’t restore form backup, and set it up fresh with only handful of essential apps. I’ve been seeing incredible battery life — i was still on 30% after over three days, yesterday. I then decided to try Match again — fresh, for the first time since the reset. I triggered the download of *one* album. The battery went down 8 percentage points while that album was downloading, and again the phone heated up immensely. Once the download was done, the drainage slowed down, but still seemed excessive compared to before (i was at 16% within an hour or so). I then shut down and rebooted the phone — and batter life was back to be excellent — the remaining 16% got the phone over the night.
Ok, so the first instinct is, of course: something if screwed up with my iTunes Match library, cloud side. right? So i grabbed my girlfriend’s iPhone 5 (also iOS 7.1; *much* smaller and completely separate iTunes Match Library). Triggered the download of an album and — lo and behold — the same behavior: songs hang in Processing for long (maybe not quite as along as for mine, but it’s i didn’t measure), and 3% battery drop for downloading 10 songs, and the battery continuing to drop faster than usual, after.
So of a sampling size of two, both libraries and (totally unrelated) Apple ID accounts show the same or similar problem. Yet no-one else seems to be reporting this, or similar, problems with Match? What am i missing?
I should also add that i see no such issues on my iPad (also running iOS 7.1 now), nor on my MacBook Air (my main Mac has the full iTunes library on disk locally). Downloading songs there works fine and prompt. I also have no problems *streaming* songs form Match.
*Does* anyone else see this? Any suggestions what to do to address this?
I’ve also filed a bug report with apple as radar://15964682.
thanx!
marc

I am experiencing the same issue as dwarfland. I have a black 64GB iPhone 5s running iOS version 7.1.1 and a grandfathered unlimited data plan with AT&T. I have had an iTunes Match subscription pretty much since it was introduced. I currently have around 19500 songs in my music library and try to have only around 2000-2500 songs physically located on the phone itself (all of my "top-rated" songs in a single playlist). I have recently needed to re-download all these "top-rated" songs after I restored my phone from a backup, wiping all the songs from my phone. Thanks for posting your experiences, hopefully someone from Apple will notice and help us out with a solution.

Macbook pro fan running fast and high cpu usage

The fan has started running all the time the error code is 4SNS/40000000 VPOR-19.763

Hey emilyiow,
Thanks for the question. I understand that you are experiencing issues with your MacBook Pro in relation to the fans. Sometimes, this symptom can indicate that the SMC needs to be reset. For more information and instructions on how to do so, check out this resource:
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
http://support.apple.com/en-us/ht3964
After performing normal troubleshooting, these symptoms may indicate that an SMC reset could be necessary.
Fans
- The computer's fans run at high speed although the computer is not experiencing heavy usage and is properly ventilated.
Additional information:
Using Apple Hardware Test - Apple Support
http://support.apple.com/en-us/HT201257
What to do if you get an error in AHT
Confirm that the power adapter is connected if you're using a Mac notebook.
Confirm that all external devices are disconnected from your computer.
Record any error code given so that you can give the information to a Mac Genius, Apple Authorized Service Provider, or Apple Technical Support Specialist.
Thanks,
Matt M.

Poor battery life and high temperatures on MacBook Pro Retina 15"

I'm having never-ending problems with poor battery life and high temperatures on a MacBook Pro Retina 15"
I took it in for service and they told me it needed a new logic board and replaced it. When I asked why they were vague about the reasons, they said "it just needed one, it failed some test". I now have the computer back and it runs the same way it always did. I bought this laptop because it was supposedly capable of high end video editing in 1080P (or so Apple's website claims) and also photo editing.
"The processor, graphics, all-flash architecture, memory, and display in the 15-inch MacBook Pro give you unprecedented mobile video editing capabilities. Super-responsive flash storage delivers up to nine streams of 1080p ProRes (HQ) content for multicam editing in Final Cut Pro X,3 while the latest quad-core processors on the 15-inch MacBook Pro decode multiple streams of video, and a powerful GPU renders millions of pixels onto the screen. With flash storage that offers up to four times the performance of a traditional hard drive,1 you can even edit four streams of uncompressed 8-bit 1080p HD video, right from the internal storage on your 15-inch MacBook Pro with Retina display.4"
However, when I'm just browsing the web and emailing it runs quite warm and battery life is quite poor. Sometimes doing those same activities I would say it gets so warm it's almost uncomfortable to have on your lap and the fans are running fast enough to become noticably noisy. I'm also driving only one screen at and a time and I heard that the MacBook Pro can supposedly do three screens.
If actually try to do something like video editing with final cut pro the laptop gets really hot, the fans are on full blast and battery life drops to only an hour or two. I think when I rendered just a 3 or 4 minute clip once I got less than hour of battery life. I will have to time again.
Anyway most people (including the sales guys) are telling me no way this is not normal. When I play with demos in the store browsing the web they are not getting warm or hot to the touch. My friend's 2013 MacBook Air is also NOT getting warm to the touch doing the same activities.
I installed iStat Pro so I could check the temperature and fan speeds. I'm seeing temperatures of 70+ on the GPU, 85+ on the GPU diode and 65+ on the CPU heatsink along with elvated fan speeds above 5K which becomes noticeably noisy. I understand that might be normal for the most processor intensive tasks but it really doesn't seem right for just light web browsing and e-mailing. (I also may have viber and skype open but that shouldn't matter). CPU usage is usually running between 2-10% as this is all happening to.
Furthermore, straight from the specs:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
I am assume "GPU" and "GPU diode" are temp measurements on the discrenete NVIDIA video card, especially since MacBook Airs from the same and newer generatio do not have this reading. Since Apple Claims the graphics "automatically switches" it seems all the harder to believe the GPU is reaching 85+ when in theory it shouldn't even be activated. I mean, shouldn't the INtel HD Graphics 4000 be capable of simple web browsing and e-mailing? Especially with only one screen activated (be it it the internal or an external)?
What should I do here? When I asked the repair guys "OK well what is the normal operating temp range for the various sensors" they said "Sorry Apple doesn't provide that info".

Yes I have.
Just web browsing and basically doing nothing I'm hear a lot of aduible fans, I'm getting 85C+ on GPU diode, 65+ on cpu heatsink. I since installed anohter program that shows me not just the CPU heatsink but the cores and the cores are at 90C+.
Seems like a lot of heat for doing nothing. Not only that but I have these problems with no external monitor while on battery power too.
I don't know what to do. They already replaced the logic board. Others seem to get advertised battery life out of Apple products and not have products that get **** near hot enough to burn you while just web browsing or watching a movie let alone advertised tasks like Photoshop and Final Cut Pro.

Attn: ALL APPLE PORTABLE OWNERS -Macbook Pro, MacBook Air Apple portable slowdown / kernel high CPU solution

Attn: ALL APPLE PORTABLE OWNERS -MacBook Pro, MacBook Air, Mac mini slowdown kernel / high CPU use problem and solution.
YOU COULD FRY YOUR COMPUTER IF YOU DO NOT FIX THIS PROBLEM SO PLEASE READ THIS ENTIRE MESSAGE!
YOUR MAC WILL THANK YOU
Hey all.
Like many of you I've got a newer Apple portable which slows down to an unusable level for an unknown reason. In my case a 13" mid 2009 Intel MacBook Pro Core 2 duo laptop. After many failed attempts to figure out what this nutty problem is I have discovered the problem, the solution and I have solved this for my own MacBook Pro. Since this fix it has been working immediately and consistently -without issue
I am sharing this with you in hopes that you to can fix your Apple portable yourself or so you know what to tell the Apple techs so they can quickly fix your Mac from this wacky and unfortunate kernel CPU hogging problem.
User Software Symptoms :
Your Apple portable computer periodically for an unknown reason slows down making everything frustratingly slow. This happens even when running previous apps that were never a problem; things that your Mac should be able to handle easily but for some reason now it can't.
Slowdown most often happens during high CPU use such as gaming, video playback/editing, etc. or when running multiple apps (even non CPU intensive apps) at the same time.
Possible Hardware Symptoms:
Your computer is making more noise than it did previously.
Your computer occasionally makes more noise but then gets quieter.
Your computer is always extremely quiet (too quiet) even during high CPU apps -worst case scenario.
It feels hotter than it normally does. Test: After several minutes of the slowness/high kernel CPU touch the computer to feel if it's hotter than normal.
Looking at Activity Monitor (in the Utilities folder) shows the kernel_task is going bonkers eating up CPU but you have no idea why.
After trying many different things to solve this problem such as :
PR ram reset, SMC reset, fresh OS install of 10.5 and 10.6 on external hard-drives, calling and speaking to various Apple tech people who had no ideas/solutions, etc. I had no luck.
Btw, if you're having the symptoms I've decscribed above I would not run the Apple Hardware check (read below as to why). You could fry your Mac!
After much testing I found the problem :
It is my belief that "recent" Apple portable computers are using low quality internal fans which soon stop working!
Fail time period seems to be about 1.0 years to 2.5 years of use but this fail rate could vary depending on use.
First noticeable symptoms (depending on what you notice) could be computer slowdown or your fan is making more noise than it normally does. This is your fan's lubrication slowly eroding making your fan spin slower and less smooth resulting in the louder noise and slower rpm spin speed. The slower fan spin speed means less cooling is happening for your computer. The effect on your computer is that the CPU and other chips are heating up! Overheating to be more specific. When your computer's chips overheat they get wonky and screw things up. Most often this seems to have the effect of making the kernel hog CPU resulting in a frustratingly slow user experience! Heat kills computer chips and it is extremely bad for them. Extreme overheat or repeated overheating has been said to shorten the life of computer chips or in extreme cases even fry them completely!
The longer this goes on without being fixed your fan loses more lubrication and spins slower and slower cooling lesser and lesser resulting in your CPU heating up more and more possibly shortening the life of your Mac! Eventually your fan will stop completely and you could fry your chips! My fan stopped completely and my MBP was running very quietly, too quietly. Luckily I did not fry my chips because I was avoiding using high CPU apps because I knew something was wrong due to the massive slow down and wonkiness when I'd run them.
Side Note:I'm a bit concerned about all those Mac mini servers which may be using the same defective low quality fans which cannot be easily serviced by their owners as they are co-located in some server facility. One positive thing is those facilities are usually well airconditioned keeping temps low.
I suggest you do not run the Apple hardware test if you suspect your computer is overheating because the hardware test can seriously heat up your Mac! I tried running this test and my Mac got so hot I had to shut it down forcefully and I was concerned I damaged the chips. If you want to run the Apple hardware check make sure your CPU temperature is ok and that your fan works well before you run the test.
IF YOU DON'T FIX THIS PROBLEM YOU COULD FRY YOUR COMPUTER DUE TO HEAT DAMAGE!
DO NOT IGNORE THIS PROBLEM YOUR MACS LIFE MAY DEPEND ON IT!
First you need to properly diagnose this problem and see if your CPU is getting to hot and you need to see if your fans are spinning at high rpms giving proper cooling, or if they are spinning at low rpms when running high intensive apps as your CPU temp increases.
TEST IF YOUR FAN(s) IS WORKING CORRECTLY :
Unfortunately Apple does not include CPU temperature reading software nor fan rpm speed software that I am aware of.
However, There are two free ways that I know of to check your CPU tempurature and your fan speed :
One app shows fan speed, and CPU heat, etc.
One app shows fan speed, CPU heat and allows you to adjust your fan speed settings.
One app is a dashboard widget, the other is a system preference.
I suggest you download both of these to check your computer statistics.
http://www.eidac.de/?p=134
http://www.islayer.com/apps/istatpro/
http://fan-control.en.softonic.com/mac
I am not exactly sure what proper CPU temperatures are for the different Apple computers and this will change given different CPU loads.
My MBP doesn't seem to function properly with anything around 90 degrees or higher (celcius).
It seems when the fan is operating normally the CPU temp should not stay above 78 degrees even under heavy load, at least with the apps I'm running in the room temperature I'm in.
I can post back later with more specific temps under longer load, etc. but I wanted to get this post up for people to read as soon as possible so they don't fry their Macs.
If a bad fan is your problem :
THERE ARE ONLY TWO SOLUTIONS FOR THIS PROBLEM :
Fix or replace your fan so it cools the CPU and other chips properly.
I fixed my fan myself and I didn't need to buy a new one. Total cost was about $8.00 because I had to buy a #00 sized screwdriver and had it shipped to me. Price includes shipping.
On my mid 2009 model MacBook Pro fixing the fan was incredibly easy :
Before I started doing this I wasn't 100% this was the problem so I decided to try to fix my fan instead of ordering a new one and replacing it. As it turns out I didn't need a new fan, I only needed to clean the existing fan and relube it's axl so it could spin easier like when it was new. It also didn't make sense to buy a brand new fan from an Apple authorized parts reseller selling me the same low quality fan for $49.00 which would probably fail in 2 years again. Prices for new comparable fans from different manufactures range from about $15.00 USD + shipping to around $49.00 USD + shipping depending on where you order them from and what brand you get.
How to fix / replace your internal fan on a mid 2009 MacBook Pro :
Please note : I am not a hardware technician, nor expert. If you decide to fix your Mac yourself you do so at your own risk through no fault of my own. Prior to opening up your Mac you should google around and learn how to do it correctly and safely so you won't damage your Mac. For example, it is possible for you to damage your Mac by static electricity from your body. To avoid this I believe proper procedure is that you wear a 'ground strap' (around your wrist) which you clip to your Mac's metal body so your body will not excude a charge into your Mac. I believe the idea here is to keep your body's charge level and your Mac's similar. Since I do not have a ground strap and fixing/replacing the fan doesn't require touching any chips I did not wear a ground strap during my fan fix. What I did was periodically repeatedly touch the metal case of my MBP hoping that would be enough and it was. Avoid unecessary actions that can build up a static charge in you. Once I started the repair I did not walk around the room building up an electrical charge in my body. Walking on carpet can often build up a large charge in us so it is better to be avoided while working on your Mac. Certain clothing can build up static charges. Combing hair, etc. If you need to get up from your repair when you come back make sure you first touch the Mac's metal case and not anything inside.
Now that we're done with the scary paranoia, below you will find some instructions on how I fixed my MBP's internal fan
Before you begin:
Check out someone's video (not mine) on how to remove / replace the fan (but not take it apart and repair it):
http://www.youtube.com/watch?v=AghE9newvbs
Check out someone's web page (not mine) on how to replace the fan in a mid 2009 MacBook Pro:
http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Mid-2009-Fan/ 1338/1
How to repair your mid 2009 MacBook Pro fan:
Make sure you are in a 'secure' environment. No pets, no kids running around, no drinks near the Mac, etc.
Make sure your computer is unplugged from it's power supply and turned off. NOT slept. Totally off / powered down.
1. Get a size #00 phillips screwdriver (Hobby store, Radioshack, Amazon).
2. Open up your MBP by unscrewing the bottom (yes flip it over so it's resting upsidedown). Note where each screw goes because some are different lengths. I placed each one around my MBP where they go, insuring I know their order (don't jumble them up). Note which direction your MBP is facing when it's upside down so if you spin it around while working on it you still know where the screws go.
2b. Some recommend removing the MBP's battery but I didn't do this step. You probably should, just to be safe. Follow the online instructions from the web page I listed about disconnecting the battery.
3. Unscrew the fan's 3 holding screws.
4. Unplug the fan's electrical connection (lift it straight up off the board). If you need to you can try to pry it up while you lift with a non metal/non electrical conductive object like a spudger if you have one or -perhaps a pen cap. Before you remove it, look closely at how it's attached so when you put it back on you won't wonder if you're doing it correctly. There's only one way it can go because it cannot fit 'the wrong way' but looking at it closely will make you feel more confident popping it back on when the time comes.
5. Remove the fan - it easily lifts out.
6. Take the fan apart by unscrewing it's one screw then unlatching the plastic clips which hold it together.
7. Seperate the fan blades from the housing. Lift the fan blades off of the fan housing by pulling it straight out away from the housing.
8. Clean off the dust that's gathered. A can of compressed air helps here (I didn't have one). I used a little brush from my electric shaver kit which worked well. Once you've removed all the dust from the fan and surrounding areas proceed to the next step.
9. Reapply new lubrication. You need less than 1 drop. Be sure it covers the entire fan blade axl as this is what needs to be well lubricated. Make sure there isn't excess oil that will fly around when the axl/fan spins at high rpms. I used the only oil I had which was olive oil (for cooking!) but I do not suggest this. At the time I was doing this I didn't know my fan was the problem so I wasn't even sure I was going to relube it. You should probably use something more appropriate perhaps like 3 in 1 oil. A good idea would be to call the manufatures of these little fans and ask them. Maybe a hobby store knows of good lubricants for these purposes?
DO NOT use things like WD 40 as it's not a long term lubricant or so I've read.
10. Once your fan is now clean and oiled (make sure there isn't too much oil) reassmble the fan.
Push the fan blades/axl back into the housing shaft. Give it a few spins with your finger.
Screw together the fan housing then reclip the clips.
11. Place the now reassembled fan back into your Mac and screw it in place (3 screws).
12. Reattach the fan's electrical wiring by gently pushing it into place. Make sure you've got the right end facing down before you push it in place.
13. Once your Mac's internals are clean and reassembled, place the rear cover back on your Mac and screw it in place.
14. Double check you didn't forget anything like screws, tools, etc.
15. Boot up your Mac and monitor the temperature and fan speed using those programs.
Compare the previous temps/fan speed to the current temp/fan speed.
Run a high CPU intensive app where your computer has been slowing down.
You should now have a happy Mac
If you have this problem and this solution fixed it for you please post in this thread letting me and everyone else know!
Hope that helps.

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

How do I download from icloud to phone? Had battery issue and bought new one

How do I download my contacts, apps and all info from iphone to my phone? I had a battery issue and was told that buying a battery and resetting phone to original state may resolve it. It seems okay now, but I need to understand how to restore the info that I backed up on last night. Thanks.

If you want to restore from and iCloud backup you have to go to Settings>General>Reset>Erase All Content and Settings. This will erase the phone. You then go through the activation screens again and when given the option choose Restore from iCloud Backup (see image below). (Connect your phone to and external charger and wi-fi as this sometimes takes a while to finish.)

Firefox very slow and high cpu usage!! (all other browse slow too)

Sorry, I asked it in 'Newbie Corner' , but still no resolved. so I asked here.
Hi all,
when i open a website just as www.sohu.com, my firefox (3.0.3) hang on, then display the web page very slow , and slow scroll , firefox cpu usage nearly about 100.
I tried some sloution,like modify /etc/enviroment to set MOD_DISABLE_PANGO=1,
or disable 'tell me if a web site ...' in firefox security option.
but still slow.
some people says it's must because flash or some js.
but when i try it in windows or ubuntu, it very fast, not like in archlinux.
so i think some thing wrong in archlinux. I need your helps.
thank you.
p.s.
1. pacman is very fast (the speed of wget about 400k/s)
2. gnome web browser like firefox , slow and high cpu.
3. the list of output of 'locale' about 11 lines.
4. i have already set host name like wiki says.
5. the system is a new system

http://wiki.archlinux.org/index.php/For … Bumping.27 ??

Packet drops and High CPU on Cisco 3845 Switch

Hello Experts,
We are facing a lot of packet drops in our LAN.
When we try to ping one of the access switches from the CE router, we get the follwoing output:
pdel1799#ping 10.132.136.17 so 10.132.164.1 si 100 re 500
Type escape sequence to abort.
Sending 500, 100-byte ICMP Echos to 10.132.136.17, timeout is 2 seconds:
Packet sent with a source address of 10.132.164.1
Success rate is 98 percent (491/500), round-trip min/avg/max = 1/9/44 ms
pdel1799#
Success rate is 98 percent (491/500), round-trip min/avg/max = 1/9/44 ms
pdel1799#
Some command outputs and show tech of all switches attached from the customer which I have attached.
I have also attached a diagram but the only router''s IP address is correct in the diagram while IP address of switches in the diagram are incorrect. Here are the correct IPs of the switches:
Core Switch : 10.132.139.2
Access Switches:
10.132.136.17
10.132.136.18
10.132.136.29
Apart from packet drops on VLAN 1 we are seeing high CPU utilization on core switch
ingur-msl-coresw#sh processes cpu sorted | ex 0.0
Core 0: CPU utilization for five seconds: 61%; one minute: 45%; five minutes: 47%
Core 1: CPU utilization for five seconds: 63%; one minute: 46%; five minutes: 56%
Core 2: CPU utilization for five seconds: 36%; one minute: 74%; five minutes: 69%
Core 3: CPU utilization for five seconds: 85%; one minute: 69%; five minutes: 65%
PID    Runtime(ms) Invoked uSecs 5Sec     1Min     5Min     TTY   Process
5638   2374911     23863975 131    52.03    52.24    52.58    1088 fed
9227   43623       21191441 182    8.36     5.53     5.71     0     iosd
6146   1437288     13888905 56     0.95     0.68     0.70     0     pdsd
5639   1292905     86276135 11     0.13     0.13     0.11     0     platform_mgr
6161   2831440     20952285 955    0.13     0.12     0.10     0     cpumemd
I can get more details required to resolve this, please help!!

Hi,
I can see several Mac Flaps in the logs provided.... i.e. on int gi 1/1/3. have you verified you don't have any bridging loop occurring on the network?
Regards,
Yaseen

BTServer causing high CPU utilization

Just got a new MacBook Pro with OS X Lion and updated to 10.7.1. I've seen the BTServer process cause high CPU utilization twice now. One morning I also noticed that the fan was running loudly while the lid was closed and the computer was locked up; I had to force power it off. Anyone seeing similar issues? Doing a search for BTServer on Google or even here in the Apple Support Communities does not bring up anything related to Lion at all, only iPhone-related articles.

yup, i had this problem too. i have a new 2.2ghz macbook pro and while at a coffee shop, i noticed my battery draining very quickly, and a look at activity monitor showed that BTServer was running away with high-cpu utilization. i killed off the process and didn't notice any loss of functionality.
not sure what it was supposed to do with so much freaking cpu cycles!!!
is this for bluetooth? i dont even have bluetooth on. im not happy about this having to be something i'd need to keep a eye on when i'm trying to maximize my battery life.

Airport Process utilizing high CPU utilization

I currently have a 13 inch MacBook Pro i7 (2012 version). Recently I upgraded to Mavericks. After using the computer for a day after the upgrade, I began to notice it becoming very hot and the fans running very high. Looking at the running processes i noticed that a process called "airport" was running and utilizing high CPU times causing the heating up and fans running. Once I stopped this process, the laptop went back to operating at normal levels.
Unfortunately this issue began to come back several times....the "airport" process starting at any time and utilizing high CPU utilization....again only by killing this process fixed this issue.
After seeing this behavior over several days, I decised to wipe the drive and install a clean copy of Mavericks in the computer. Thought here was that possibly something did not carry over correctly from the upgrade from Mountain Lion to Mavericks. Unfortunely this did not correct the issue with the "airport" process as it still is continiung to launch at any time and spike the processor until I manually kill the process.
I do not recall this issue occuring while running Mountain Lion so it seems to be specific to Mavericks at this point.
I was hoping to hear if any other have experienced this type of issues while running Mavericks.

You should be able to find the information you are looking for from the default Total CPU Utilization Percentage monitor. This monitor has a built in diagnostic task that will kick off when an alert is triggered to list the top cpu consuming processes.
To find which processes were causing CPU to spike, simply review the State Change Events history in health explorer for the machine that was affected, for the Total CPU Utilization Percentage monitor. I have modified my second screen shot
to remove machine names, but you should get the idea. If a cpu monitor went from green to red, it will run the diagnostic task and list the process information and cpu usage at the time of the alert under state change events.

LMS 4.2.3 Server high CPU Utilization

Hi All,
We are observing high CPU utilization on the lms server. tomcat is the process eating more than 1GB of the memory i checked from the task manager.
Server details:
device license : 100
windows server 2k8 R2, with 8gb physical memory.
anybody suggest what might be causing the issue.?? because of this performance reports were affected.
Regards,
Channa

Hi Channa,
log into dbreader using the following::
http://servername : 1741/dbreader/dbreader.html
or
https:// servername : 443/dbreader/dbreader.html
user Id is DBA
Database Name is upm
password :: user defined (by default password is c2ky2k)
1. Here is the query to get the pollerwise managed MIBObjects:
"select count (*), PollerName from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId = b.PollerId and b.Poller_State NOT IN (1) Group by b.PollerName;"
2. Here is the query to get the total mibobject count for the active pollers
“select count (*) from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId =
b.PollerId and b.Poller_State NOT IN (1);”
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Desktop Window Manager high CPU utilization

I have several Windows 2012 servers that are showing high CPU utilization (70% or higher) coming from the Desktop Window Manager. I do not have the Desktop Experience feature installed on these machines. The interesting thing is that the process
for dwm.exe does not show up as a service that I can stop or restart. I've read through the various posts about re-registering dmw.exe so that the service shows up again, but nothing has worked. Since these are application and file servers with
no need for regular desktop use, I don't really need any fancy desktop graphics or performance. I have the Advanced Performance Options set to 'Background services'. Can anyone tell me how to stop dwm.exe or at least reduce it's CPU footprint?
Thanks,
Joe

Hi Joe,
Based on my research, On Windows 8 and Windows Server 2012, DWM is used at all times and cannot be disabled.
For more detailed information, please refer to this article:
Desktop Window Manager is always on:
To troubleshoot the high usage of CPU, I would like to recommend to follow this article to collect and analyse the relevant log files and dump files:
Troubleshooting High CPU performance issues - Part 1
If you want to analyse the dump file, I also recommend you can open case and contact Microsoft support.
I hope this helps.

High CPU utilization with javascript

Has anyone noticed how Safari 10.4.4 has high CPU utilization (e.g. >60%) when javascript is enabled, particularly for certain websites? Opening FoxNews.com and a few Wired.com pages in separate tabs sends my Powerbook fans screaming. Disabling javascript brings utilization down to under 2%.
Any suggestions on how to fix this, or do I have to live with it? I prefer not to permanently disable javascript as a number of websites I frequent depend upon it, without consuming CPU.
Thanks,
Ira

Hi,
I agree that it's a function of the javascript code itself on the webpage, and not with the browser. It's possible to even write infinite loops in Javascript which can practically hang a web browser due to the high percentage of CPU cycles being consumed. I only knowingly encountered such a site once, when I was at a customer site with my PowerBook running on battery power. I unknowingly navigated to a site which apparently had some Javascript of some other executable code, which had the result of running my battery from about 95% charge to about 60% in about 10 minutes!
The only way to avoid this is to avoid the sites that cause this kind of problem, or to disable Javascript when visiting these sites. And if possible, send a complaint to the webmaster of the site. He/she might not be aware of this problem.
Ken

High CPU Utilization by J2EE engine

Dear team,
I want to find the tread causing high CPU utilization within the "jlaunch" process. As stated in SAP note: 743204. I ran the command "tps -a <pid> -a" in the development box and it it running fine. But the same command in the production portal is giving us the following error:
jueppci:/#/usr/sap/tps -a
Initialize measurement (10 sec) ...Memory fault(coredump)
I did a strings command om the core and I got
jueppci:/#strings core
libdl.so
Why is tps not running properly ?

Hello,
Thanks Russell. It is HP-UX 11.31 (11i v3). We have opened a Very High Message with SAP. SAP AG and HP are working with us to solve this issue. We will be applying some patches and doing a lot of Java parameter changes !
I'll update the solution once the system is stable and the case with SAP is closed.

Macbook 2, 1 battery issues and high CPU utilization

Similar Messages

Maybe you are looking for