MacBook 2.16 C2D and PhotoShop

Hi
I recently purchased a MB C2D 2.16 and I have just started a 1 year course on PhotoShop and wondered if this cut's it for pure graphics etc and will it take me through the course as thing's seem ok at present.
I use a PC for the course and the MB is no way as fast as that.
cheers

CS2 would run better with more RAM. 1 GB isn't really enough especially running in rosetta. You will be much happier if you either get more RAM (cheap fix) or get CS3 (more expensive fix).

Similar Messages

  • Which macbook pro for lightroom and photoshop

    Have my eye on the two 15" models. One with Intel iris pro graphics, the other that also has the nvidia gt 750m. Maybe I'm making mountains from molehills. You can tell me if you think that's the case
    I will use my laptop at home always attached to a large screen. It's what I do with my current, April 2008 macbook pro. Right now a 25" NEC. I may add an additional screen as well, so I might have two screens besides the laptop, one attached via hdmi.
    Right now I don't do video work. No gaming concerns for me. Photoshop and Lightroom the bulk of my work. 70,000 image Lr catalog. Large size photoshop files. Well near 1 gb sometimes with several layers.
    If I buy the mbp with just the intel iris pro graphics card I'm thinking to upgrade processor to 2.5ghz. Will also upgrade ssd to 500gb. Or do I need, will I benefit from the nvidia card and card switching, dgpu?
    I've just been reading about problems with the discrete graphics card version. Problems with freezing video, some with problems looking at certain websites via a browser firefox or safari. I wonder if that's only with older versions of the mbp.
    And that the mbp with the dgpu, the nvidia gt 750m always uses that card when there is an external monitor attached. Creates additional heat for the computer.
    Just looking for some advice before i hand over the cash. There is only a 100 difference in price so in the end I'm not concerned about cost. Just want a computer to do what I need, do it well, and for me to have as few problems as possible. I do like to keep my computers a long time. This current mbp is seven years old in a month. The computer I had before that, a G4, lasted me eight years.
    thanks for advice...

    The 2.6 Haswell i7 processor should be just fine - you really don't need the faster processors. Since Lightroom caches so much, though, it would be nice to keep most of that in RAM - much faster than writing/reading to a flash storage device - so I would recommend 16GB of RAM as you cannot ever upgrade the RAM on your own (or even through Apple).
    You should be able to do anything on your MacBook Pro as on your iMac - albeit on a smaller screen!
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • MacBook Pro Retina (2013) and Photoshop Elements 12 or Lightroom 5?

    I have moved to a new MacBook Pro Retina (2013) from my old Windows 7 PC. As an amateur photographer which is better - Photoshop Elements 12 or Lightroom 5?

    Lightroom is already optimized for the retina display and PSE12 looks superb on the Macbook pro R. You are never going to get a retina display much larger than 15 inches but once tried you would never wish to go back to other monitors. It’s not just photos; all Apple apps on the MBPr including web browsing are optimized.
    Large monitors can be great if you are soft proofing images for print enlargements or for editing and rendering video where the extra real estate is useful. So it comes down to need. In general, images appear sharper on smaller displays.  I upload most of my photos to my own website and Google Analytics tells me that a high proportion of my visitors are increasingly viewing on iPads, tablets and smartphones. For me that makes the MBPr ideal for my photo editing. It has far superior clarity compared with the excellent 27 inch Dell Ultra Sharp monitor on my desktop machine.
    The only caveat is that nobody really knows the life of flash storage. Some say four years when writing continuously to the SSD drive and less once you start moving from unused space to overwriting. For that reason I always try to write to an external hard drive or SDXC card; reserving the SSD, as far as possible for running the applications.
    I think we are getting a bit off-topic as the OP already has the MBPr and only needs to decide between PSE & LR or both.

  • I have lightroom and photoshop cs6 on a windows computer. How do I transfer downloads and photos to my new Macbook pro

    I have Lightroom and Photoshop cs6 on a windows computer. How do I transfer these programs and to my new MacBooks pro?

    So how do I do it?

  • My macbook pro was repaired and since then i can't get nor photoshop or bridge to initialize. a window appears that says it has  initializing problems due to an icc profile issue.

    my macbook pro was repaired and since then i can't get nor photoshop cs5 or bridge cs5 to initialize. a window appears that says it has initializing problems due to an icc profile issue.
    there appear two error messages. the first one says that there has been a problem sincronizing because of a programme error. the second one appears after you clicked ok on the first window and says that photoshop couldn't be initialized because the icc profile is invalid.
    does anyone know if i have to delete any system or photoshop preference? the illustrator is also having troubles. thanks

    thanks! what finnally worked better was renaming the «settings» folder in te «color folder» in the library with ~before the name. now indesign is asking me for thw icc profiles but still works, so i asume i can reinstall color settings only for indesign and go on.

  • I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
    Look at my network.
    Shared is what your looking at.  I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders.  Hope that helps if your looking for a very simple way on a wireless network.

  • I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?

    I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?

    Get the CS6 installation file and when you run it on the separate machine choose to install only the programs you wish it to have.
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • PC Quicken data to MacBook Air? (and Photoshop...)

    A long time PC friend is dreading switch to Air due to much old Quicken (and Photoshop) data.
    Is it possible to import PC Quicken data onto a MB Air using the Mac version of Quicken? If so, does anyone have links to a 'help' resource for this purpose?
    Same thing re: Photoshop. She knows she'll be forced to upgrade PS, but are there any sites or documents to help with the arduous process of transferring from PC to Air.
    She doesn't want to use the Apple version of PC software.
    Thanks,
    Karen

    Thanks all for the responses. I decided to bite the bullet and buy an iMac since the extra horsepower and the bigger screen are more handy. I'll sure miss the mobility, but it was more of a convenience than a necessity. Also, the Macbook Air's incredibly small hard disk and its lack of ethernet (and the absence of the usb ethernet adapter on the store) were a deal breaker to me.
    Oh, well. Maybe next time. Thanks again.

  • I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop

    I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop CC.
    Is there a list of the files and/or folders that contain Settings and Preferences which can be copied from the old system to the new?

    with your cc apps you should try to use the sync feature.  that's never worked consistently for me, but when it does work, it's helpful.
    there are preference folders and presets and settings that you could copy but you're better off installing fresh because a common problem for people with adobe program issues is a settings issue.

  • MacBook Pro - display turns black in iPhoto and Photoshop

    My screen display has suddenly started blacking out in iPhoto and Photoshop with occasional display glitches appearing at other times.
    Running Disk Utility brings up the follow error:
    Checking extended attributes file.
    Incorrect number of extended attributes(It should be 619782 instead of 619781)
    The volume Macintosh HD was found corrupt and needs to be repaired.
    File system check exit code is 8.
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I don't know if this is additional to the graphics card/display issues, or the root cause but on running Disk Utility from this mode, no errors are being reported!? And I'm back to square one. Is there any other software I can run to investigate and repair?
    Thanks for looking.
    Mac profile:
    MacBook Pro (15-inch, Mid 2012)
    2.6 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    Intel HD Graphics 4000 1024 MB

    Go to App store,Sign in with your app id and password and select Store/and purchases and re download them free of charge
    see more like this
    https://discussions.apple.com/message/22649002#22649002

  • Difference in quality of iSight on Macbook Pro C2D and Macbook Pro Intel

    Hi there
    I currently have a MacBook Pro Intel 2.16mhz 17" laptop and I just bought a new MacBook Pro 2.33 C2D laptop. I have noticed that the picture quality of the built in iSight camera of the standard Dual Core is much better than on my new C2D version. The new C2D version seems to have more 'noise' over the whole picture than my standard Dual Core. Does anyone know why this should be?
    Many thanks in advance
    Dan
    MacBook Pro 17" Intel & Macbook Pro 17" C2D   Mac OS X (10.4.8)  

    I have just bought my C2D 15,4" 2,16Ghz model and iSight has a very good quality. Compared to the CD model I don't see any difference

  • I get a message that Lightroom and Photoshop are not supported by MacBook. Is that so?

    I get a message that Lightroom and Photoshop are not supported by MacBook. Is that so?@

    OS X 10.7.x is the minimum version for the newest PS and LR versions.  If you want more specific answers you might tell us what versions of OS and PS/LR you’re working with.

  • I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

    I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

    Demons1 in the future please only migrate your documents and settings.
    Please use the uninstallers to remove your current installation.  They are located in the Applications/Utilities/Adobe Installers folder.  Once the uninstall is complete you will also want to run the CC Cleaner Tool.  You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
    If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • New Mac: Why are CC and Photoshop Elements not working when Lightroom and Reader are fine

    Last week I changed computers (swapping an old Mac for a 13-in MacBook Pro Retina running OSX Yosemite 10.10.3. I copied all my data over to the new machine using Migration Assistant.
    All programs work fine (including my copy of Lightroom 3 and Reader XI). But my CC and Photoshop Elements 10 do not. I have tried uninstalling both, but whenever I try to reinstall PE10 from its disk or download it just stops almost at the end. I then I get an "initiation failed" message, along with a request to download the now defunct "Support Advisor" app!
    I cannot download Adobe Application Manager, or the CC desktop app either - for the former I get an "initiation failed" message, along with the "download Support Advisor" app" message again! For the latter I get a message saying "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." Then I get a message and a link to download Creative Cloud. Then when I've downloaded it and I click on the installer... it runs for a bit and then I get the message again: "Adobe Creative Cloud Is Needed to Resolve this problem - however it is missing or damaged." And I get a prompt and link to download the CC app. Guess what happens next? And so it goes on. And on and on, in a tedious circle.
    This is incredibly annoying and frustrating as I have work to do! Anyone have any ideas what's happening?
    Cheers
    K

    do not use migration to install adobe programs.
    you should uninstall and clean whatever you've done, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    then dl the cc desktop app to your new computer and use it to install your adobe cc programs, Download Adobe Creative Cloud apps | Free Adobe CC trial
    if you have non-subscription adobe programs, use the installation files for them:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for

  • SAP PI Interface for Multiple Bapi

    hi, i need to expose 2 Bapi (Bapi A and Bapi B) using SAP PI 7.0 using single PI Interface / webservice. 3rd party --> SAP PI -->SAP ECC6. for first option, i can create new Bapi C and include Bapi A & B new Bapi C.  then only expose BAPI C in SAP PI

  • Birthdays not showing in Ical

    Am a recent convert to Mac. Brilliant decision! Am trying to display birthdays in ical using address book. I've ticked the display in preferences. In ical the read only birthday calendar shows in the left hand panel, but the actual birthdays don't ap

  • Db-link problem from v8 to v7

    Hello, We have 3 Oracle databases called A, B and C. A and B are Oracle 8.1.6 databases and C is Oracle 7.3 We have a database link from A to C (create database link dbl_c connect to user_ora identified by <pwd> using 'C'). On A, we have synonyms to

  • Drag & relate problem in Query Iview

    Hi, I just trying the weblog 1-2-3 Drag&Relate (or D&R for dummies) So all the steps mentioned in that i have followed properly but in Content Admin --> unification under Business Objects i do get sales and stores and i define them according to weblo

  • Photoshop CS6 spacebar shortcut for hand tool stopped working. How do I get it to work?

    I just bought a new IMac and finshed downloading my new cs6 photoshop. I notice my spacebar no longer scrolls/ pans anymore. A bit annoying, that how I am use to doing my work. How Do I fix the problem?