Macbook 2012 Mid: Can't mount USB mass storage after upgrading to Mavericks
Hi guys,
I'm having big problems with USB mass storages. After upgrading to Mavericks my Mac doesn't see some USB storage devices (mostly USB sticks and Android phone's memory cards via USB. My external USB 3.0 hard disks work fine) at all even though the devices themselves (for example my Android phone) are clearly recognized according to the System Report. When I plug them in, they don't show up on my Finder or on Disk Utility.
I've searched everywhere and it seems like some other people are having the same problem, none seems to offer a definite solution. I've even formatted my HD and reinstalled Mavericks from the recovery partition. Now it mounts a USB stick that was in one of the USB ports at the time of installation but still doesn't read anything else! The funny thing is when I boot into Windows 8 on my Boot Camp partition, I can mount any USB devices including the USB stick and the Android phone I'm having problems on Mavericks without any problems. I can even see then when I boot into the recovery so there's clearly something wrong with Mavericks.
Any chance someone has figured out a solution for this? Apple should've address this long time ago.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? Note: If the devices are not in Mac OS X format, they normally won't mount in safe mode, but they should appear in Disk Utility.
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
Can't mount USB mass storage device [RESOLVED]
I plugged in my iRiver mp3 player in an attempt to transfer files to it from my hard drive and it prompted me what I wanted to do with it (do nothing, open a folder, etc.). Irrepsective of which alternative I choose, I get the following error:
Error - Konqueror
A security policy in place prevents the sender from sending this message to the recipient, see message bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.Volum" member "Mount" error name "(unset)" destination "org.freedesktop.Hal"
Can anyone tell me what this means and what I need to do to fix the problem?Thanks Bert. It wasn't working until I realised I had to reboot to effect the new group membership!
Now I've got another problem. My iRiver shows up with permissions:
drwxr-xr-x
How do I change them so that every time I connect it to my PC it allows me to write to it?
It's mounted as /media/IRIVER but I couldn't see a 'media' group in /etc/group. -
Cannon MP830 can't use the scanner function after upgrading to Mavericks.
I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?
There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.
-
I am trying to use recovery software (Recuva) to replace deleted photos. When connecting to my laptop, I can only choose Media Device (MTP) or Camera (PTP). Recuva cannot find my phone without USB Mass Storage enabled but that option seems to no longer exist? What can I do to enable this?
You need to enable USB debugging on phone, so the computer can see it as a storage device.
Go into Settings, then scroll down to the bottom and click on About Phone.
Scroll down to the bottom to where it says “Build Number”.
Tap on “Build number” 7 times. After the third tap, Android will start counting down on how many taps are left before you can access the developer options, with a playful “You are now [insert number of remaining taps] steps away from being a developer”.
After the 7th tap, you’ll get a “You are now a developer!” message.
Now, go back to the main settings screen, and voila, the “Developer options” menu will be visible at the bottom, just above “About phone”!
Developer options->enable USB debugging -
Can't login to my account after upgrading to Mavericks
I have a late 2008 Macbook Pro. I have had no problems up until upgrading to Mavericks. I did a complete backup using Time Machine prior upgrading. I have a 750 GB hard disk with about 70 GB of free space. This computer has been bullet proof for 5 years now.
Anyway, I tried to upgrade to Mavericks when the OS came out but was unsuccessful at that time. It just hung up halfway through the install. I decided to just restore than to waste time figuring out what happened.
Fast forward to yesterday. I decided to give it a try again. The download and install completed without any problems. However, I can not login to my machine using my account. After entering my password, I am just getting the spinning rainbow wheel or whatever it is called. Techincally, I have two accounts, one for me and one for girlfriend. She never used hers so mine has been the only one we have ever used on the computer. That account does have admin permissions and that is also the one where I started the upgrade from.
Things I have tried so far...
1) Added another admin account to try and remove unused applications just in case old programs were no longer compatible. Btw, I can successfully log into this account. This is actually the account were I am logged into currently and using Safari to document this problem.
2) Launched File Utility. I did verify disk permissions and then repair after it completed. No luck. I also did Verify Disk but that did not return any problems.
3) I also did a reinstall of Mavericks again but the same problem still exists.
Btw, I did notice when logged in as Admin to the newly created account, that the Downloads, Desktop and Movies folder under my original user account have a little icon or stop sign next to their name when viewing through Finder. Permission problem? Even if that is the case, not sure why I would not be able to login into my original account.
Any ideas? Worst case I will restore my backup and just forget about Mavericks all together. I guess if I have nothing better to do some day in the future maybe I will do a fresh install and try to restore my personal files back. However that sounds like a lot of work.
Thanks..Try this
-
How can I restore my card reader after upgrading to Mavericks?
I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?
Launch the Image Capture app in your Applications folder.
Conenct the card reader.
Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
Apple is not responsible for third party software and hardware used with your Mac. -
Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!
Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.
I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8. I installed the updated driver for 10.9 on Canon's website and still get the same problem.
-
My macbook pro '07 runs slow and freezes a lot after upgrading to Mavericks
Also my Optical Drive keeps kicking out my DVDs
Hardware Information:
MacBook Pro (17-inch 2.4GHZ)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
6 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 1:34:25
Disk Information:
TOSHIBA MK1655GSXF disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
THE CAVE (disk0s2) / [Startup]: 159.18 GB (12.2 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Toshiba External USB 3.0 750.16 GB
EFI (disk1s1) <not mounted>: 209.7 MB
Wayne Enterprises (disk1s2) /Volumes/Wayne Enterprises: 749.81 GB (428.35 GB free)
Apple Inc. Built-in iSight
Apple Inc. iPhone
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Other World Computing OWC Mercury Elite 400mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
Batcomputer (disk2s2) /Volumes/Batcomputer: 499.76 GB (50.83 GB free)
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 157
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15104.778994) Support
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) Support
[not loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[kext loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.adobe.SwitchBoard.plist Support
[not loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[invalid] com.oracle.java.Helper-Tool.plist
[not loaded] com.parallels.desktop.launchdaemon.plist Support
[not loaded] com.synium.cleanappdaemon.plist Support
[not loaded] com.tether.plist Support
[failed] com.torch.update.agent.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.CS5ServiceManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.coupons.coupond.plist Support
[not loaded] com.extensis.FMCore.plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.hp.messagecenter.launcher.plist Support
[not loaded] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[invalid] com.oracle.java.Java-Updater.plist
[not loaded] com.parallels.desktop.launch.plist Support
[not loaded] com.parallels.DesktopControlAgent.plist Support
[not loaded] com.parallels.vm.prl_pcproxy.plist Support
User Launch Agents:
[loaded] .dat01a2.000 (hidden)
osascript -e tell application "Folder Actions Dispatcher" to tick
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.adobe.ARM.[...].plist Support
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[not loaded] com.facebook.videochat.[redacted].plist Support
[not loaded] com.intego.virusbarrierexpress.agent.plist Support
[not loaded] com.linotype.FontFolderProtector.plist Support
[not loaded] com.veoh.webplayer.startup.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
[not loaded] ltcm.plist Support
User Login Items:
iTunesHelper
Dropbox
Alfred
RealPlayer Downloader Agent
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 10.1.8 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.8 Support
LogMeInSafari32: Version: 1.0.530 Support
Unity Web Player: Version: UnityPlayer version 3.5.2f2 - SDK 10.6 Support
googletalkbrowserplugin: Version: 4.0.3.13724 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
DirectorShockwave: Version: 12.0.7r148 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari64: Version: 1.0.530 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CoolirisWebKitPlugin: Version: (null) Support
LogMeIn: Version: 1.0.530 Support
Google Earth Web Plug-in: Version: 6.0 Support
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
o1dbrowserplugin: Version: 4.0.3.13724 Support
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
OfficeLiveBrowserPlugin: Version: 12.3.0 Support
Safari Extensions:
Facebook Photo Zoom: Version: 1.1012.7.2
Zemanta: Version: 0.1
Reload Button: Version: 1.2
Exposer: Version: 1.1
1 click to Amazon !: Version: 1.0
Print Plus: Version: 1.0.1.0
The New York Times: Version: 0.1
SCC: Version: 1.2
Add To Amazon Wish List: Version: 1.1
Bing Highlights: Version: 1.0.19
AddThis: Version: 1.7
Discount Search for Amazon: Version: 1.1.0
Searchme: Version: 1.3
FoxTrick: Version: 0.10.0.3
Like.fm for Safari: Version: 1.0.9
Facebook Improved: Version: 1.8
Facebook Photo Zoom: Version: 1.1109.26.1
SPOI Options: Version: 1.8.173
BeFrugal.com Toolbar: Version: 3.1
TED HTML5 video playe: Version: 1.0
SafariRestore: Version: 6.0.1
SocialPlus!: Version: 2.5
Zemanta: Version: 0.1
OpenSearch for Safari: Version: 1.09
StumbleUpon: Version: 1.0.6
Slick Savings: Version: 1.0
Glue: Version: 4.5.2
Cloudy: Version: 1.4
SafariRestore: Version: 4.14
Add To Amazon Wish List: Version: 1.3
Widgets: Version: 1.1.4
MLB.com Toolbar: Version: 1.1
Duplicate Tab Button: Version: 1.1
SafariRestore: Version: 5.5.4
reddit comments: Version: 1.4
AddThis: Version: 1.7
MLB.com Toolbar: Version: 1.1
Firebug Lite for Safari: Version: 1.2.0.16797
Facebook Photo Rotator: Version: 1.0
InvisibleHand: Version: 2.6
Amazon Prime/FREE Shipping + Discount Search: Version: 1.0.1
Ookong: Better shopping experience at Amazon: Version: 4.0.5
SafariRestore: Version: 4.12
SafariRestore: Version: 5.5.3
Ebay Shopping Assistant: Version: 1.1
Twitter for Safari: Version: 1.02
Sessions: Version: 1.3.0.2
Social Fixer: Version: 6.751
InvisibleHand: Version: 2.5
Add To Amazon Wish List: Version: 1.6
Snapper: Version: 0.6
Stop/Reload Button: Version: 1.6
1-ClickWeather: Version: 1.0
CustomSearch: Version: 1.4
SafariRestore: Version: 4.11
SafariRestore: Version: 4.13
Facebook Photo Zoom: Version: 1.1206.11.1
Amazon Button: Version: 1.0
The Tracktor: Version: 1.0.4
Facebook Improved: Version: 1.8
MacRumorsMinimal: Version: 1.6
The New York Times: Version: 0.1
feedly: Version: 5.6.384
ZENTUBE: Version: 1.0
Add To Amazon Wish List: Version: 1.8
SnapBack: Version: 2.8 (24)
Reload Button: Version: 1.1
Better Facebook: Version: 5.801
Ookong: Amazon price history & more: Version: 4.1.3
Buffer: Version: 2.1.7
YourVersion: Version: 1.2
zoomintosafari: Version: 1.7
MLB.com Toolbar: Version: 1.1
Offer Assistant Lite: Version: 0.5.1.0
Glue: Version: 4.5.2
Google Search by Image: Version: 1.0
Print Plus: Version: 1.1.0.2
Turn Off the Lights: Version: 2.0.0.6
Auto Refresh: Version: 1.3
Ultimate Status Bar: Version: 1.2.3
CustomSearch: Version: 1.2.2
Keyword Search: Version: 1.2
Add To Amazon Wish List: Version: 1.6
Add To Amazon Wish List: Version: 1.5
Thurly: Version: 2.0.1
MLB.com Toolbar: Version: 1.1
Hockey.264: Version: 1.3.0
MacRumorsMinimal: Version: 1.4
Reload Button: Version: 1.2
Awesome Screenshot: Version: 1.3.2
Better Facebook: Version: 5.941
Grab and Scroll: Version: 1.1
SocialPlus!: Version: 2.5.1
1-ClickWeather: Version: 1.0
Like.fm for Safari: Version: 1.0.9
PriceBlink: Version: 1.2
NewWindowButton: Version: 1.0
Google Reader Tools: Version: 1.0.1
Facebook Photo Zoom: Version: 1.1206.11.1
YoutubeWide: Version: 5.0
Keyword Search: Version: 1.2
1 click to Amazon !: Version: 1.0
Bing Highlights: Version: 1.0.20
Twitter for Safari: Version: 1.02
Slick Savings: Version: 2.0
Mitto: Version: 1.0
Open in Papers: Version: 1.2.3
Sessions: Version: 1.1.4
Rapportive: Version: 1.2
Facebook Photo Zoom: Version: 1.1008.4.1
Tweet Bar: Version: 1.17
MLB.com Toolbar: Version: 1.1
Stop/Reload Button: Version: 1.3
feedly: Version: 4.0.332
Yahoo! Axis: Version: 1.0.2
WebsiteOpener: Version: 1.0
Better Facebook: Version: 5.701
Amazon Shopping Assistant: Version: 1.1
Better Facebook: Version: 5.951
Ultimate Status Bar: Version: 1.3
TwitterTranslate: Version: 2.0
Ultimate Status Bar: Version: 1.2.5
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
fbplugin_1_0_3: Version: (null) Support
Move_Media_Player: Version: npmnqmp 071302000002 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx: Version: 1.0 Support
Google Earth Web Plug-in: Version: 6.2 Support
RealPlayer Plugin: Version: (null) Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FAPPreferences Support
MacFUSE Support
Perian Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
THE CAVE: Disk size: 148.25 GB Disk used: 136.89 GB
Destinations:
Batcomputer [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 86
Oldest backup: 2013-05-11 04:14:42 +0000
Last backup: 2014-05-12 19:12:59 +0000
Size of backup disk: Excellent
Backup size 465.44 GB > (Disk size 148.25 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
37% com.apple.coremedia.videodecoder
16% Clear Day
11% WindowServer
4% repair_packages
4% Adobe Photoshop CS6
Top Processes by Memory:
227 MB Safari
177 MB repair_packages
101 MB com.apple.WebKit.WebContent
92 MB AddressBookSourceSync
80 MB mds_stores
Virtual Memory Information:
13 MB Free RAM
2.01 GB Active RAM
2.01 GB Inactive RAM
634 MB Wired RAM
902 MB Page-ins
28 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'\\\\n",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a)print "CPU: "a;if(b)print "I/O: "b;if(c)print "Net: "c" (KiB/s)";if(d)print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF=int($NF/10240)} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L)f=f"\n "$0;} END { F=FILENAME;if(!F)exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v[0]=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "${v[0]}" ]];};A'$((3+i))'() { v[0]=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "${v[0]}" ]];};A'$((5+i))'() { v[0]=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "${v[0]}" ]];};';done;A7(){ v[0]=$((`date +%s`-v[3]));};B2(){ v[$1]="${v[0]}";};for i in 0 1;do eval ' B'$i'() { unset v[0];((v['$((i+1))']==0))||{ v[0]=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v[0]=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v[0]=`grep -Fv "${v[$1]}"<<<"${v[0]}"`;};C0(){ test "${v[0]}"&&echo "$_";};C1() { [[ "${v[0]}" ]]&&printf "${f[$1]}" "${l[$2]}" "${v[0]}";};C2() { v[0]=`echo ${v[0]}`;[[ "${v[0]}" != 0 ]]&&C1 0 $1;};C3() { v[0]=`sed -E "${s[0]}"<<<"${v[0]}"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A4 14 6 11 0;B2 0 5;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A4 14 7 11 6;B2 0 7;B3 4 0 22;A4 14 6 11 0;B2 0 8;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro Early 2008 won't go to sleep after upgrade to Mavericks
I have a MacBook Pro that is of the Early 2008 variety. Ever since I upgraded to OS X Mavericks two nights ago, it will no longer go to sleep. This is with me using either the power button or directly selecting sleep from the Apple menu. All that happens is it blanks the screen. If I hit a key it turns the screen on and asks for password. With screen off I can definitely hear the fans and harddrive still in operation. I have to shut down to make it turn off. How to fix this??
As soon as you wake up your display, launch Terminal from your Applications > Utilites folder and enter the following command.
pmset -g
in the resulting text, is there a reason next to sleep that says what activity is preventing it from sleeping?
eg:
sleep 20 (sleep prevented by mds, UserEventAgent)
Then in System Prefernces > Energy Saver, does clicking on Restore Defaults resolve the issue?
(This will reset any preset settings, but it may also clear the issue for you) -
I can't login to App Store after upgrading to Mavericks.
I read through all the suggestions here, nothing help. My username and password are correct, but still not work. I can't log in, means I can't update my iWork, can't purchase new apps. Should I still wait till Apple fix the problem or should I reverse to my previous version?
ive been having the same problen and a couple people are trying to help here is the link to that thead
https://discussions.apple.com/thread/5518868?start=0&tstart=0
i haven't had any luck yet maybe you will with something i was said could help just start from the top -
Can't connect to app store after upgrading to Mavericks
After installing Mavericks, I can't update any of my apps, or open any previous apps. When I do try to sign in, it always says "An unknown error has occurred". I have a yahoo.com Apple ID, but even when I try signing in with a gmail.com Apple ID, I get the same error. What is going on?
That worked gor me as well.
Go to Library/Preferences/SystemConfiguration and then delete NetworkInterfaces.plist
Restarting. Going to the system prefs/network - saving then launching the app store.
Did the trick for me. -
Z87-G45 USB Mass Storage & other devices not working (except keyboard/mouse)
My Z87-G45 died on me last month in warranty so I received a replacement one.
Unfortunatly I'm experiencing mayor USB issues.
- In Bios mode, no USB mass storage devices are detected (usb stick/disk). USB keyboard and mouse work fine
- In Windows no USB device except for the keyboard and mouse are detected.
- Can't see USB Mass Storage Device driver in the USB controllers list
Installed all latest drivers + CMOS CLEAR just in case. Results stay the same.
I assume it's best that I return the motherboard?
Kind regards
FrederickQuote from: frederick.dhont on Today at 02:43:46
All drivers are already all up-to-date
I also want to stress that USB mass storage devices are not detected in BIOS, NOR as bootable USB device. So I can't upgrade BIOS even if I wanted to.
have you done >>Clear CMOS Guide<< with power cord removed?
have you tested with mainboard out of PC case placed over wooden table? -
How do I enable the USB Mass Storage after it had been disabled?
look at the point 5 to enable
http://www.sevenforums.com/tutorials/181611-usb-storage-device-enable-disable-connecting.html -
I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?
Invoke your warranty and take it back.
-
Can't mount usb devices as a normal user
Hi.
I woud like to ask for help. I've been struggling with some "bug" that i came with Arch and usb devices (disks, pendrives). I can't mount it as a normal user using KDE default mounting software (Dolphin, for an exmample). I can mount it only in therminal by using sudo privileages. Is there a way to fix it? I read it, the same problem:
https://bbs.archlinux.org/viewtopic.php?id=180025
I tried to check everything according this topic, also with udisk2 archwiki thread but on my desktop machine i just can't mount usb devices without root password. This is how the error looks like for a Dolphin:
<Over sized Image removed. URL link preserved>
This is the error, from picture
Error when trying to use acces to "removable device 7,5GB". System showed: The requested operation has failed. Error checking authorization:
GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
Could somebody help me? I even installed udisk mounting tool to mont without root password, added 50-udisks.policy and it just does not work.
Help.
I can mount it wit terminal by typing
sudo mount /dev/sdXY /mnt/usb
than i'm asked for password and it is mounted. Don't know why i can't mount it without password when connecting usb devices to usb port.
moderator edit [ewaller]Removed link to over sized image.. Note, you set up a click through thumbnail correctly, but the "Thumbnail" was the same image and was too large
Last edited by ewaller (2014-09-28 16:37:41)Some refresh. I followed this topic:
https://bbs.archlinux.org/viewtopic.php?id=180025
with the same problem. I found errors here:
firekage@arch_desktop ~]$ journalctl -r -u polkit
-- Logs begin at pią 2014-06-13 18:04:12 CEST, end at czw 2014-12-25 20:15:01 CET. --
cze 23 15:59:15 arch_desktop polkitd[306]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.24, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
cze 23 15:29:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:05 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:03 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:21:00 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:20:06 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.24 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:19:49 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 22:19:49 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 22:19:49 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 22:19:49 arch_desktop polkitd[306]: Started polkitd version 0.112
-- Reboot --
cze 20 22:15:10 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 22:15:08 arch_desktop polkitd[304]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.23, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 22:02:59 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:56 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:55 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:54 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:02:53 arch_desktop polkitd[304]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.11 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 22:00:00 arch_desktop polkitd[304]: Registered Authentication Agent for unix-session:c1 (system bus name :1.23 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:59:26 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:59:26 arch_desktop polkitd[304]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:59:26 arch_desktop polkitd[304]: Finished loading, compiling and executing 1 rules
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:59:26 arch_desktop polkitd[304]: Started polkitd version 0.112
cze 20 21:59:26 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 21:58:39 arch_desktop systemd[1]: Stopped Authorization Manager.
cze 20 21:58:39 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 21:55:01 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:59 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:58 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:54:56 arch_desktop polkitd[306]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 21:47:40 arch_desktop polkitd[306]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 21:47:22 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 21:47:22 arch_desktop polkitd[306]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 21:47:22 arch_desktop polkitd[306]: Finished loading, compiling and executing 1 rules
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 21:47:22 arch_desktop polkitd[306]: Started polkitd version 0.112
cze 20 21:47:22 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:56:46 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:56:45 arch_desktop polkitd[310]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:51 arch_desktop polkitd[310]: Registered Authentication Agent for unix-session:c1 (system bus name :1.21 [/usr/lib/kde4/libexec/polkit-kde-authentication-agent-1], object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 19:55:16 arch_desktop systemd[1]: Started Authorization Manager.
cze 20 19:55:16 arch_desktop polkitd[310]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
cze 20 19:55:16 arch_desktop polkitd[310]: Finished loading, compiling and executing 1 rules
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /usr/share/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Loading rules from directory /etc/polkit-1/rules.d
cze 20 19:55:16 arch_desktop polkitd[310]: Started polkitd version 0.112
cze 20 19:55:16 arch_desktop systemd[1]: Starting Authorization Manager...
-- Reboot --
cze 20 19:54:38 arch_desktop systemd[1]: Stopping Authorization Manager...
cze 20 19:54:13 arch_desktop polkitd[305]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.21, object path /org/kde/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
cze 20 16:47:01 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 20 03:02:19 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 21:32:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:25:08 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:40 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:38 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:36 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:35 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
cze 19 19:24:34 arch_desktop polkitd[305]: Operator of unix-session:c1 FAILED to authenticate to gain authorization for action org.freedesktop.udisks2.filesystem-mount-system for system-bus-name::1.10 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:firekage)
Could somebody help me? I even checked all rules in /etc/polkit-1/rules.d and /usr/share/polkit-1/actions on my notebook, and all files are the same with the same user permission but on notebook i can mount usb without problem, but on my desktop can't at all.
Maybe you are looking for
-
Doubt in receiver determination
Hi all, I have a SAP Business system that is configured in XI and an IDoc that comes from the SAP Business System. Already there is a scenario with the SAP BS and IDoc. Now I want a new scenario with the same BS and IDoc but a different receiver syst
-
My Laptop operating system isn't compatible with the sortware...HELP
I'm using my old PC Laptop which uses Windows Vista operating system....how can i download the free trial pacakages??
-
Solaris Volume Manager metadisks inside a zone
Hi, I am concidering depoying zones as part of my companies build standard. What I would like to do is mount a disk slice inside the local zone for the purposes of application installation. I am already proposing to mirror the internal disks. Could I
-
Error by sending IDOC-acknowledgements
Hello, we have the following scenario: R/3 IDOC -> XI -> Mail-Adapter We want to receive acknowledgements from the adapter. But we get the error "Sender XI Party http://sap.com/xi/XI / XIParty / xyz couldn't be transformed to an IDoc Partner". Does a
-
Safari 5.1 will not clear cache
I have been at mac since, well forever, my Cube is still running and that was my 3rd mac, so not a total nub. However, it seems that safari 5.1 is a bit broken. I do web page work, among other things, and I need to clear the Cache regularly. Unfortun