Macbook 4.1 webcam not working

Hi, i have problem with webcam. i have installed firmware, loaded uvcvideo, and nothing. no /dev/video0
my kernel version 2.6.37, macbook 4.1

I'm on macbook 4.1 and the iSight has been working since the first time I installed Arch.
Have you done https://wiki.archlinux.org/index.php/Macbook#iSight ?
Just make sure you have the extracted firmware
# ls /lib/firmware/isight.fw
and do a cold boot (not restart but shutdown then power-on).
I don't even have uvcvideo in rc.conf's MODULES() (but I got MOD_AUTOLOAD="yes")
Just a wild guess, have you try installing pommed ?

Similar Messages

  • Macbook air builtin webcam not working after installing Mountain Lion

    camera is not working after installing Mountain Lion

    This did not resolved my problem. Camera green light glows but facetime still deos not work. Also
    tried with different users and different applications. Not working

  • Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

    I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week. 
    Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
    Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
    Fix:
    With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
    It also supported AOL, AIM, Google Talk, Jabber.
    Guess I miss it frist time... hope this helps...

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • My macbook pro external speaker not working! help please

    My macbook pro external speaker not working! help please

    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
         Pllug in the speakers.
         Do they show up?
         Make sure that Mute is not enabled.
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • How can i transfer my calendar from iphone to macbook? Sync is not working!, how can i transfer my calendar from iphone to macbook? Sync is not working!

    how can i transfer my calendar from iphone to macbook? Sync is not working!, how can i transfer my calendar from iphone to macbook? Sync is not working!

    If the calendar is connected to a server account, like Exchange, you cannot sync via iTunes. You need to connect to the server on your MacBook.
    If it is not connected to a server account then you need to ensure syncing is set up in iTunes. This is in the Info tab for your selected phone in iTunes.

  • My macbook pro retina is not working camera after updating Mountain lion.

    My macbook pro retina is not working camera after updating Mountain lion.
    I have also updated to latest update 10.8.1. Still its the same.

    Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • HT2090 my macbook air camera is not working

    My Macbook Air camera is not working when I try to use photobooth. I have no problem with google hangouts or skype. How can I resolve this problem?

    • Restart your Mac. If the problem continues, use the Disk Utility in your Mac's Finder > Go > Utilities folder to repair permissions.  Then test the camera again.
    • If the your trouble persists,.  reinstall OS X Mavericks.  Repair permissions again immediately following the restart that completes the reinstall and before testing the camera again.
    •  Also check your Mac's  > Software Update... or Apple - Support - Downloads for latest Mavericks updates applicable to your Mac model such as OS X Mavericks 10.9.1 Update.

  • Macbook 6,1 charger not working

    Macbook 6,1 charger not working A1344
    The Macbook is a 6,1 purchased in 2010.
    My friend has had a go at the shooting suggestions but nothing seems out of sorts beyond it not working properly.
    No damage or signs of misuse.
    Ordinarily I wouldn't have thought a warranty would still apply but this paragraph on Apple support page made me wonder.
    --- Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of the evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.---
    When my friend took the Macbook and charger into an Apple Store in central London she was told it's out of warranty and best option is to just buy a new one.
    Any thoughts regarding whether Apple has approved free replacement for these chargers?
    She is in UK but machine was purchased in Australia
    http://support.apple.com/kb/TS1713
    thanks
    Jason

    all sorted now - new charger given
    turns out a bit of intelligent discussion yielded results
    so .. if you have any problem with an older mac take it into an Apple Store
    theres an excellent chance they will fix and replace even when the machine is out of warranty

  • Webcam not working

    Hello, not surewhere to post this but i have the hp g42 475dx and i recently reset it. Everything else works fine but the built in webcam will not, im more than likely missing a driver, and it doesnt pop up in device manager. Hp wants me to pay them 60$ to fix it so im hoping someone else can help! please help! thanks.

    Hi @AlexJakubiak ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue on your HP G42-475DX Notebook PC and the Webcam not working. Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
    Here is a link to troubleshoot the WebCam and it does include some steps to take when it is not seen in the device manager.
    Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system. Here is a link to the YouCam software if you need it.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP mediasmart webcam (not working)

    Hello. I've a Hp pavilion dv6 2150 us. 
    The problem is the next one: My webcam works fine, but not all the time...  Sometimes it doesn't work and show a message that says ''no webcam detected, try plugin in a webcam into your computer now. If you are using an integrated webcam , make sure that it is turn on'' 
    Of course im using an integrated webcam. and it is turned on, enabled an all. I've Updated my webcam, download other versions of the driver, unistalled, installed back, used recovery system, looked for others drivers for the hp pavilion dv6 2150 us. But it keeps doing the same. One moment is alright, at other moment it lost the device ... 
    What can i do? it is really anoying and not useful at all if when i need to use the webcam it is not detected. 
    Specification: HP pavilion dv6 2150 US, 4 gb memory ram, windows 7 ultimate 64 bits, 

    Hi @rajeshomtri ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your  HP Pavilion dm4-1162us Entertainment Notebook and issue with the WebCam not working correctly. Here is a document on troubleshooting the WebCam for Windows 7.
    If that does not help I would uninstall the drivers and software.
    Hope this help you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Suddenly my MacBook Air password does not work to open my session.  I haven't changed it so need help, thanks!

    The password I usually use to open my MacBook Air suddenly does not work.  I haven't changed it so don't know what to do next.  Will appreciate your help!

    Resetting or changing an account password:
    http://pondini.org/OSX/Password.html

  • I downloaded Acrobat Pro XI on my MacBook and it's not working. There's a message: Click reopen to open the application again. This report will be sento to Apple automatically. I did it several times and even restarted my laptop. Nothing happened. Any hin

    I downloaded Acrobat Pro XI on my MacBook and it's not working. There's a message: Click reopen to open the application again. This report will be sento to Apple automatically. I did it several times and even restarted my laptop. Nothing happened. Any hints?
    Thanks,
    Cristina

    you don't have to purchase acrobat pro xi.  you can, but you can also use it via adobe's creative cloud subscription service.
    to use it via cc, uninstall your current trial.
    then go here and log in with the same adobe id used to pay for your cc subscription and start your acrobat xi download, Adobe: Creative, marketing, and document management solutions

  • Microphone and Webcam not working/We​bcam not recognized by YouCam

    Hello,
          I have a dv7-6c95dx and my YouCam  program tells me that it does not recognize my integrated webcam. I have read all of the webcam forums on this site and clicked on all of the links people have posted in the forums. I have uninstalled the CyberLink YouCam program and it still comes up with the same messages. The webcam also does not show up in my device manager. The microphone is malfunction as well, it will not work any any programs including skype. 
         I have heard that the webcam can come unplugged internally, will that also cause the microphone to stop working? I have run out of options and I do not want to pay anyone to fix it. I would appreciate any advice on this subject. 

    Hi DillOrNoDill,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7-6c95dx Notebook and sound and microphone issues and Webcam not working correctly. I would be happy to assist if needed. Try these steps first.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    You could also try Microsoft troubleshooter located on your Notebook.
    Here is a document on WebCam troubleshooting. The Webcam will be listed in your device manager under Imaging devices. You should be able to click the action button and scan for new hardware.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • Hp psc 500 multifunction printer/scanner

    I changeed my PC and the new one has not any paralell port, only USB ports. There is a pralell-USP adapter or converter that works with my printer ? What solution do you recommend?

  • Safari 5 doesn't work on Mac OS X 10.5.8?

    so i downloaded safari 4 yesterday via software update and I was kinda excited for it. it was fine yesterday and this morning while using it I discovered that it is in fact very bad. Whenever I open a new page, it hangs a lot. it always gives me that

  • Convert UTF-16 string  to UTF-8 or Hexadecimal

    we are working on SMS Application .we are sending UTF-8 bit it's working fine but we are try to send UTF-18 then we got unknow string. any body help me how to convet UTF-16 to UTF-8 or Hexadecimal.

  • Quadrature encoder on PCI 6220 DAQ custom digital filter problem

    I am using both counters on my 6220 DAQ for quadrature encoders.  What I am trying to do is filter some bounce that I am getting on the axes.  I want to be able to custom set the minimum pulse width for each encoder (or both the same should be fine).

  • Copying Chart of accounts clients

    Hi all, Can somebody tell me how to copy a chart of account and the associated G/L accounts from one client to another? Please help me in this regards. Please remember it is copying of chart of accounts across different clients and not company codes.