Macbook 7,1 mini-display to display port?
Apple doesn't show a mini-display port to display port option in its specs; only dvi and hdmi, yet neither support an external display of 2560x1440. But it claims to support that display. How? What adaptor should I use?
I know this MacBook has a mini-display port. The monitor I'm considering buying has a display port, dvi, and hdmi port. Will a mini-display port to display port adaptor work to get the 2560x1440 resolution?
Similar Messages
-
HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?
Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option. -
hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank youken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro. -
MacBook suddenly won't detect my display, Using Mini Display Port to VGA?
MacBook suddenly won't detect my display, Using Mini Display Port to VGA?
dohdoh1985, I have the exact same problem also! I recently bought a 42" RCA LCD TV. I connected my MacBook Pro to my TV using a Dynex Mini DisplayPort to HDMI adapter that I got from BestBuy. It worked great until I upgraded to Mac OS 10.6.4 and then it suddenly stopped working. Same TV, same settings, same cables, same adapter. Nothing changed since the last time it worked except that my OS was upgraded to 10.6.4, so i am assuming that is the culprit. The symptoms are EXACTLY the same as what dohdoh1985 described; when I plug in the TV, the laptop display flashes (3 times) as though it is detecting an external display and the picture on the TV briefly goes from blue to black for about 1 second then back to blue. The TV does not appear in the display menu / control panel and there is no sign that the MacBook detected it. I went through the usual troubleshooting steps (reset PRAM, checked connections, tv settings, etc) but nothing worked. Other HDMI sources (i.e. Blu-ray player) work fine on the TV using the same HDMI cable on the same port so there is nothing wrong with the cable, the TV or the TV's input settings.
Meanwhile, I can still connect my MacBook to my external ViewSonic monitor at work without any problems. It's just the TV that's not working.
I cancelled my cable subscription a while ago since I only watch shows online nowadays and this was my only way of watching TV shows, so I'm quite upset.
Apple, please help! -
Mini Display to Display Port Problem
Ok so I have the mini display output in my MacBook pro and currently I just use a VGA adaptor but I presume this won't yield best results. So since my HP HD monitor has a Display Port I thought the best idea was to get a mini display to display port cable.
However when I plus it in it all goes a bit weird. The screen on the MacBook flicksmonnand off and no signal goesntonthe monitor. Occasionally it does get a signal and switches on from standby but nothing actually shows up.
Any ideas or will I have to resort to a mini display to dvi lead instead?Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
Connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?
Hello Fellars,
Is it possible to connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?
Best regards,That means i can either buy a new Macbook WITH Thunderbolt AND a Thunderbolt Display or
use my 2009 Macbook Pro with Displayport and an older Display?? -
One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.
-
I have just bought an ipad mini with ret.display, I wish to link up my MacBook Pro to icloud with my ipad, but my MacBook doesnt have an icloud icon in system preferences. How do I upgrade my MacBook to accept iCloud link.
See -> Mavericks System Requirements.
Most of us are running Mavericks with no problems - others seem to be having various problems (if you check out the Mavericks forum). But I would recommend that you have a current backup whichever way you go.
Clinton -
How can i connect my MacBook pro to my 24" cinema display and my led tv?
I sãs wondering if there is a way of connect my MacBook pro to my 24" cinema display trough mini displayport and my led tv trough the hdmi input. I know that is a lot of addapters but i never saw something that allows me to do it.
Thanks for any helpYou can get a Matrox DualHead2Go:
http://www.matrox.com/graphics/en/products/gxm/dh2go/
There is also one for 3 monitors if you fancy that too...
and http://www.monoprice.com sells all kinds of cable adapters for your displays -
Wifi does not work correctly on iPad Mini w/ Retina display
I've found that Wifi does not work properly on the iPad mini w/ Retina display.
Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with my pocket Wifi router.
None of them exhibit any Wifi problems whatsoever except for my iPad mini w/ retina display.
Here are the details:
In the middle of using Wifi with my pocket Wifi router, the Wifi connection will abrubptly drop, then reconnect. After the Wifi reconnects, it is no longer able to connect to the internet (even though Wifi itself is connected).
Once the iPad mini w/ retina display's Wifi gets into this state, the following may or may not restore WiFi temporarily:
Restart the device
Reset network settings
Yet, even if connectevitiy is restored, the problem will happen again within minutes.
When the iPad mini w/ retina display gets into this state, the Wifi on my iPod touch, other iPads, and on my Macbook Air work perfectly fine, so I know the problem is not with my Wifi device or it's connection, but specifically with the iPad mini w/ retina display
Note:
The iPad mini w/ retina display never has any issues with my home or work Wifi networks. The problem only happens when connected to my pocket Wifi device. Yet, all of my other iOS devices and my MacBook Air work perfectly with my pocket Wifi device, therefore I know the problem is not with the pocket Wifi device, but with the iPad mini with retina display.
Solutions:
Resetting the iPad mini w/ retina display to factory settings does not solve the problem
Resetting network settings on the iPad mini w/ retina display does not solve the problem
I have even replaced my original iPad mini w/ retina and got a new one. Yet, the new device exhibits the exact same behavior as the original device.
Conclusion:
I know this is not a hardware problem (since it happened with both my original as well as replacement device).
I know this is not a problem with my pocket WiFi router, since it works perfectly with all of my other iOS devices and MacBook Air.
Therefore, this must be a software / firmware bug with the iPad mini w/ retina display. Apple will need to fix this in a future software update.
Has anyone else seen this problem?I too have experienced this issue over the past two days... I have a 16gb ipad mini retina, for reference. I bought the device one week ago, and had not experience any issues at all until bringing my device to work. I logged into my work's enterprise level wireless network both yesterday and today, maintained normal wifi capabilities for 2-4 hours each day, and was then randomly dropped, both days. I tried hard resets, resetting my network settings, airplane mode, etc. Nothing has worked. I am still offline on my ipad mini retina.
My iPhone 5 is sitting right next to my iPad mini retina. The iPhone is currently connected to the same very network, and has been for the past two years. I have never lost connection on my iPhone's wifi, just my iPad mini retina.
This must be some kind of bug, as it does not sound like a hardware nor network issue.
Hopefully they fix this in 7.1. -
MacBook Pro 2011 Dual External Monitors/Displays.
Is it possible to connect and run two external monitors (non-Apple - with DVI input) from a MacBook Pro 15 or 17". (ie, close the lid on the MBP and have two monitors running). Do you need extra hardware?
needs, as of this date, a thunderbolt display, as you will not be able to daisy chain anything other then thunderbolt displays. So you would get a thunderbolt display and then can use that to connect a second display to it with a dongle of your choice.
But it will work, and is natively supported.
There are alternatives to this like DisplayLink which is used to make a usb hardware be able to connect DVI to usb and usb to your computer.
but they've been having some issues with Lion however it's only with earlier MBP models so you might be good. This would be a cheaper solution.
Google usb to dvi I have the Arkview adapter but they're all the same because they use the same drivers. Again, your best bet is a thunderbolt display or waiting for someone to make an adapter that lets you connect multiple display with minidisplay port/thunderbolt. -
Ethernet through display's USB port?
Hi:
If I connect an Apple 24" LED Cinema Display to a MacBook Air, it uses up the Air's one USB port. But there are three USB 2.0 ports on the back of the Display. So can I plug the USB to Ethernet adapter into the display and allow the Air to work on an ethernet network through the Display's USB port?
Anyone had success doing this?
Thanks,
mmThis might not be the most help since I don't have your display, but assuming that the display is functioning as a USB hub, you should be okay. I have a powered USB hub connected to my MacBook Air and the ethernet adapter works absolutely fine with it.
-
What is better for college? An iPad air or an iPad mini with retina display?
I'm currently a junior in high school and I'll be graduating in the summer of 2015. My parents, well mostly dad, are planning on buying me the iPad air with 128 GB of memory. I got curious and went to look at the price and compare models and I saw that the iPad mini with retina display was the same as the iPad air, the only difference is the size. Since I saw that it was cheaper I was thinking on telling my parents to buy me that instead of the iPad air because it is more costy and my family isn't really the rich kind of people. I will be only using the iPad for school and nothing else since I have my iPod to play games on and stuff so it will only be used for purely educational purposes. Plus I've been hearing around that the iPad air is not that great and stuff because it has a bigger screen and such. Personally for me, I do not care about the screen size I just care about the price for my parents' sake because I don't like it when they have to spend a lot of money. So can you please help me decide on which to get and why it would be better than the other? Please and thank you.
iPad Air vs. Retina iPad Mini: Which tablet is right for you?
http://reviews.cnet.com/8301-31747_7-57610252-243/ipad-air-vs-retina-ipad-mini-w hich-tablet-is-right-for-you/
Should I Get the MacBook Air or the iPad Air
http://www.apartmenttherapy.com/should-i-get-the-macbook-air-or-the-new-ipad-air -good-tech-questions-196728
Unless you are going to store many thousands of high resolution photos and LOTs of movies or videos, you don't need a 128GB storage. Save some $ and get a smaller capacity.
16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
How Much iPad Memory Do You Need?
http://ipad.about.com/od/iPad-Tutorials/a/How-Much-iPad-Memory-Do-You-Need.htm
You might consider getting a refurbished iPad for less than the regular retail price.
Buy a Refurbished iPad? The What, When, Why and How
http://www.maciverse.com/refurbished-ipad.html
Has new screen, back and battery, and 1-year warranty.
Refurbished iPads from Apple
http://store.apple.com/us/browse/home/specialdeals/ipad
Cheers, Tom -
My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can I use the same adapter for my ipad mini w/ retina display as I use for my iphone 4S?
I have an iPad mini with retina display and an iPhone 4S. Have both the small and large adapters (5W and 12W I believe) that came with the two products. I am traveling abroad and want to know if I can just use the smaller adapter (little cube-shaped one, 5W) for both the ipad and the iphone. OR, can I forgo taking the Apple adapters that were supplied, and instead use one of the travel adapters that has two 2.1-Amp USB ports?
You can use the 5W to charge the iPhone, but if it charges the iPad Mini Retina, it will be slow, so you would have to turn it off and let it sit forever to get charged. If you were going to take just one, take the 12 W on as you can use it to charge both devices without issue.
I would recommend getting the Apple travel adapters if you are going abroad. The 12W adapter should have a duck head you can pop off and put the international adaptation on there. http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
Maybe you are looking for
-
Can't compile form(from Shanghai,China)
The code I use to compile the form: $ /u02/dev/devora/8.0.6/bin/f60gen \ module=/u02/dev/devappl/au/11.5.0/forms/ZHS/EAMFWOBL_E.fmb \ userid=APPS/APPS \ output_file=/u02/dev/devappl/eam/11.5.0/forms/ZHS/testprint.fmx \ module_type=form batch=yes comp
-
Is it possible to replace a lost password placed on a Pages file?
<E-mail Edited by Host>
-
Can I create an action link(drill through) to a Union report
hello experts, Through my summary report I have created an action link to the detail report. My summary report is coming from one subject area; but my detail report is a union of 4 different subject areas. When I click on my action link to do to the
-
Could not complete this operation, an assertion has failed
The massage appears, when I click Save for Web command. I have Photoshop CS3 Extended, Windows Vista. The same command in Illustrator works perfectly. I would appreciate any assistance on how to fix this headache. Reinstalling, pressing alt-ctr, goin
-
Is footer of InDesign extension palette customizable in my own built extension in Extension builder?
Hi I have built my own extension palatte for inDesign, in CS extension builder. I want to remove/customize the default footer of extension palette. How is this possible? Best regards Sal