MacBook Air 13" 2012 / 5,1 - Service Battery on 293 Cycles? Terrible!
I just noticed the 'Service Battery' under power options. The machine isn't even 2 years old! I've had a magsafe board and trackpad replaced in less than 12 months under AppleCare - now this? I mean we pay the Apple Tax for premium quality products right?
Charge Information:
Charge Remaining (mAh): 2917
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4605
Health Information:
Cycle Count: 293
Condition: Service Battery
Battery Installed: Yes
Amperage (mA): -1091
Voltage (mV): 7561
Sometimes the battery gets 'confused' - perform an SMC reset. Also, Apple officially refers to a battery as a consumable so when it fails under normal use it isn't considered a warranty item but there is a great deal of leeway so head to an Apple store to try for a warranty replacement. And if you get a no from one genius or location try another, or try for a second opinion.
Similar Messages
-
i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?
This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential. -
Apple's Replacement Program for Macbook Air mid-2012
Hi everyone, I just wanted to know more about apple's replacement program for Macbook Air mid-2012. I updated the said firmware and then my mac air stops working. However, according to the program, they are replacing it free of charge. I just went to an authorized service provider here in the Philippines and I just want to know if I will be paying any. I can't find good discussions in Google. Thanks.
You should not, as the replacement program is worldwide. In case the reseller refuses to repair your Mac for free, print this website and take it with you
-
Batterij onacceptabel snel leeg in Macbook Air medio 2012 !!
Lees me een breuk over deze klacht en apple komt hier niet tegemoet. Ben sinds 2010 overgestapt naar Apple en was tevreden met de toen bestelde 27" iMac. Apple 2 daarna de derde versie en toen begon het bergafwaards te gaan. super slechte service...klachten over het crashen van safari in Ipad New nooit opgelost.
nu heb ik sinds enkele dagen de macbook air midden 2012 gekocht en wat een drama, zelfs de tijd dat ik aan het schrijven ben, is de batterij met 2% gezakt van 79% naar 77% !!!!!!
Heb daarna deze vraag gegoogled (over batterij leven macbook air midden 2012) en schrok me wild. Klachten zijn er al een hele tijd en kom antwoord van Apple nergens tegen. als dit de toekomst van Apple is dan kan ik niet wachten op concurrent voor tablets en laptops want dit is regel recht schandalig.
is er iemand die voor dit batterij leven probleem een oplossing heeft?Bedankt voor je reactie ga je advies zeker na. Wat me met name opviel was de massa aan berichten die rond gaan over dit probleem.
Bijgaand afbeelding van de resultaten. -
my Macbook air mid 2012 suddenly turn off after a strange sound (like the sound òf a fuse has blown or something like that) and I also feel a burnt smell too while i am watching a film on the internet and did not charge the laptop at this moment. The sound was from the left of it, and now just a dark screen , even I tried charging it (still has green light at the charge tool). I bought it on 13st April 2013, not often use.
I love apple and i am so sad that a new product which i seldom use could be break so easily and outstanding. It's so late in my country now but i am too disappoint about the trouble so i am writing with hope of supporting from Apple and the community.
Please help , thank broYou will have to take it to an Apple Store for repair.
-
MacBook Air Late 2012 randomly powers off. Won't stay on longer than 2 minutes.
I have a MacBook Air late 2012 model.
Every time I try to Reinstall OSX or try to run any diagnostics. It wont stay on long enough to finish anything. Some times it wont come on when you press the power key. I just does the Apple chime and then it could be 5 seconds or 2 mins but it always powers off.
I called Apple because the SSD was recalled for that year and the symptoms of a failing hard drive is random rebooting or powering off. So apple said they would fix it for free.
I am not near an apple store so I took it to an Apple licensed Technician to get the new SSD. I got a call a few days later saying that the SSD was fine but I need a new Logic Board. He said it was the most expensive part of the laptop and that sounded very convenient for him that I need the most expensive part, about $478.00.
I would like to know the symptoms of a Failing Logic Board and the SSD
I can never get a straight answer from reading Apples forums.
This laptop was 1300.00 new and I had to buy it from my Ex again for 200.00 when she couldn't fix it. So im tired of putting money in a laptop that cant even run games or hold my entire iTunes Library lol.
If anyone has had this same problem let me know.
I'm afraid that its an easy fix and they are just trying to get more money.I have a MacBook Air late 2012 model.
Every time I try to Reinstall OSX or try to run any diagnostics. It wont stay on long enough to finish anything. Some times it wont come on when you press the power key. I just does the Apple chime and then it could be 5 seconds or 2 mins but it always powers off.
I called Apple because the SSD was recalled for that year and the symptoms of a failing hard drive is random rebooting or powering off. So apple said they would fix it for free.
I am not near an apple store so I took it to an Apple licensed Technician to get the new SSD. I got a call a few days later saying that the SSD was fine but I need a new Logic Board. He said it was the most expensive part of the laptop and that sounded very convenient for him that I need the most expensive part, about $478.00.
I would like to know the symptoms of a Failing Logic Board and the SSD
I can never get a straight answer from reading Apples forums.
This laptop was 1300.00 new and I had to buy it from my Ex again for 200.00 when she couldn't fix it. So im tired of putting money in a laptop that cant even run games or hold my entire iTunes Library lol.
If anyone has had this same problem let me know.
I'm afraid that its an easy fix and they are just trying to get more money. -
How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi
I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYING TO ADD THE SELECTED PRINTER: UNABLE TO FIND THE APPROPRIATE SOFTWARE ON YOUR SYSTEM AFTER RUNNING SOFTWARE UPDATE."
Problems:
1) Cannot connect on Network because there is no WPS button on my Airport Extreme and Airport Express.
2) Cannot print, both via USB or wifi network.
When I bought the printer, I specifically selected this because it has Airprint and wireless printing and was one of the few printers in the Apple Online store. However, I have been having a lot of issues getting the printer installed to be used on my Macbook Air.
Please help!!Thank you John Galt!
After running SOFTWARE UPDATE, I restarted the Macbook. (DO NOT CONNECT THE PRINTER TO THE MACBOOK YET!)
Then I connected the Canon Printer MG3170 to my MacBook Air via the USB cable.
Next, I switched on the printer.
I am able to print and scan (via USB cable) from;
SYSTEM PREFERENCES - PRINT & SCAN - select CANON MG3100 series.
To install applications for printing & scanning, go to http://support-asia.canon-asia.com/contents/ASIA/EN/8201148300.html
However, this solved part of the question above, i.e., printing via USB cable (which is not the whole purpose of using the Airprint Printer) but at least it is a start.
*NOTE: UNINSTALL any prior Canon softwares and drivers specifically installed for this printer first before attempting the steps above as it may interfere with the installation process. -
Did you have buggy Mavericks issue after installing on Macbook Air Mid 2012?
Before I have upgraded my OS X Mountain Lion 10.8.3 to Mavericks 10.9 it runs so smoothly and no issues or hanging that I encounter. But just this morning when I installed Mavericks, I have the following issues:
1.) When I was adding a book(pdf and epud files) in iBook, the Finder malfunctioned, coz when I browse the books to it's location so I can add some more again, the Sidebar icons disappeared and only the names left. And when I go to the location of the files using Finder, the content is nowhere to be found, just a symbol on the window’s status bar that it is loading or busy on something.
2.) When I go to the Launchpad, when I scroll to left and right to find the apps I’m looking using the touchpad, it's not as smooth as before. It tends to halt on sliding to the other groups of apps, seems like there’s a friction stopping it from sliding smoothly all the way to the next group of apps.
3.) Updating the Apps from App Store seems cumbersome like the iPhoto and iMovie, coz when the internet fails or drops its signal for a while or so, you go back and download everything again, and when you hover the mouse to see the progress of the downloaded app, it shows for example 22mb of 1gb then shifted to 300mb of 1gb then back to 22mb of 1gb then back again. It’s not accurate and going berserk.
4.) And I don't know if it is just me, but the screen profile have changed a bit coz the red color of the Power Point icon seem too red and everything that has a hint of red color seems exaggerated, it’s too bright red. I'm just not sure it might be the GUI style of the Mavericks. . .
Anyway, have any of you experienced these kinds of issues on your Macbook Air Mid 2012?
Hopefully this could be fixed and Apple would seed an update in no time.Even on my MacBook Pro Haswell (2013) 15 inch retina with a GT 750 2gb.
The Things in Mavericks that really make me :
1. The Launchpad is buggy when i scroll to the left or right... sometimes it doesn't even respond at all.
2. Safari and Other Apps Like AppStore freez sometimes, and i need to force quit everytime, because its not responding.
3. Bootcamp Windows 8.1 <---- NOT 8 Support (Bad Keyboard- Facetime camera- drivers,
Icons (brightness, sound) are ugly on retina screen) + GPU Drivers i can't update (maybe that's normal).
4. iTunes is very SLOW when Scrolling the Albums (i know its 2880x1800 and that's heavy for GPU) But it's just not a good 'Experience'.
5. Gaming its realy good on this MacBook, but please make the drivers better, i know this GT 750 GPU can do better. -
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
everytime i try to install windows 8 on my macbook air mid 2012 via usb i keep getting that error after bootcamp partition and reboot...
does anyone know how to solve it ? its not my flash drive cuz i've already tested 2, and both have the exact same error.
error:
Non-system disk
press any key to reboot
and if i try to hold the alt/option button while its starting i can get to the windows 8 install screen, but when i select the partition bootcamp to install it doesnt let me move on.. and yes i've clicked on format in the windows installer screen, and yet nothing works..
HELP.There are no Windows 8 Bootcamp drivers yet so Windows 8 is unsupported. Go the the Bootcamp forum and read all the posts from Windows 8 users who can not get Windows 8 running correctly because there are no drivers. https://discussions.apple.com/community/windows_software/boot_camp
-
I have a macbook air (mid 2012) and a thunderbolt display (27'').
Do I absolutely need to connect the power supply together with the thunderbolt cable ?
I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
Good luck,
Clinton -
What is the best way to partitioning Macbook Air 13" 2012 solid state drive
What is the best way to partitioning Macbook Air 13" 2012 solid state drive.
Tech,
You don't provide enough information onto which anyone could reasonably formulate an answer.
As mentioned, you don't indicate the circumstances that would warrant consideration of multiple partitions. Moreover, you also don't indoicate the size of the SSD in question.
Like Fred said, ordinarily you leave it alone as one. Some people like to keep data and the OS/apps separate, but it is for specific reasons. -
I have a Macbook Air (july 2012) with OS X 10.8.3 installed. I have dvds with .vob files and have Quicktime Version 10.2 (603.12). I can't play the DVDs. There are some features of QT that I like, e.g. precise frame selection and save as .png file-help. Am I missing some Apple software? I thought QT for Mountain Lion could convert the .vob files - is there some setting that I have missed?
Any suggestions that preserves a simple workflow much appreciated.arthur wrote:
Perian is here: Perian - The swiss-army knife of QuickTime® components
Perian will be retired soon. -
Best Way to Create Multiple Partitions on Macbook Air 13" 2012 solid state drive (256GB)
I just bought a Macbook Air 13" 2012 solid state drive (256GB) w/ 8GB Ram and I would like to be able to dual boot to Windows 7 and have a 3rd partition to share files between both Operating Systems. Can someone point me in the right direction, recommend partition sizes, pros and cons etc.? Should i bother with the 3rd partition or just by an external HD?
FYI,I will mainly be using the MBA for programming in Visual Studio 2010 and some ios development. Thanks in advance.This, for example:
OS X: "Some features of Mac OS X are not supported for the disk (volume name)" appears during installation -
MY NEW MACBOOK AIR IS HEATING UP AND ITS BATTERY IS DRAINING OUT REALLY FAST
MY NEW MACBOOK AIR IS HEATING UP AND ITS BATTERY IS DRAINING OUT REALLY FAST. WHAT TO DO? I BOUGHT IT JUST 5 DAYS AGO.
If you are within the 14 day purchase period you can exchange your MBP for a replacement. If not you can have it checked out at the Apple store genius bar.
CPU intensive applications will place stress on the CPU/GPU which will create heat and speed up the fans. That is normal. If you will, download from the Internet iStat pro and install it. When your MBP gets hot, post an image such as this from mine:
Also open Activity Monitor and set to show 'All Processes' and '%CPU' to display values from high to low. Post that as well like this:
From this information we may be able to tell if there are any issues or not.
Ciao.
Maybe you are looking for
-
Hi, I ahve an urgent requirement. I have to poll records(logical delete) from a VIEW in oracle 11i database. But polling is working on table but not on VIEW of the table. i have created the view and commited but polling was not happning. can any one
-
I have maybe simple question, but I can`t really understand how to figure out this problem. I have 2 applications(one on mobile phone J2ME, one on computer J2SE). They commuinicate with Input and Output Streams. Everything is ok, but all communicatio
-
Read a txt file make it a clob
Hello. I have a text file that I'd like to read and then set the contents to a clob value. I'm really not too familar with streams and buffers, so everything I've tried has been grasping at straws. I've tried reading the file with a fileReader object
-
Hello, is it possible to uninstall leopard and use it on another computer? thnx dave
-
hello all, I have a dump file with .dmp extension which is taken from my friend.How could I install in my database.