MacBook Air 13" Command Key Backlight

I recently purchased a Mid-2011 13" MacBook Air.  I "love it", but it has a curious anomaly with the backlight behind the left Command Key.  The right Command Key shows three little backlight segments underneath as you tilt the keyboard up and look under it.  The left Command Key only lights two segments leaving the center "mm" looking dim because there is no light underneath the key in the middle.  At first, I thought I simply had a defective keyboard and I went to Genius Bars at two local Apple stores and called the customer support phone line.  The nice fellow at the first store told me that the problem occurs on all 13" Airs, but not on the 11" models, and sending the unit out for repair would only end with the same problem.  Curious?  I brought my Air home and called the Customer Service number.  He consulted with his Senior Advisor and told me that I had a defective keyboard and should take it into an Apple store for service.  I went to a second Apple store and they replaced my original Air with a brand new one (great service), but only to find in the store that the replacement Air has the same problem.  So, the first Genius Guy was right, but what a curious little problem!!  Why would not both Command Keys be lit evenly, with the problem or defect apparently only occuring on 13" models?  Any ideas or solutions?

Try resetting the PRAM: http://support.apple.com/kb/ht1379
Should fix it. If not, it's a hardware issue.

Similar Messages

  • MacBook Air default function keys

    On F5 and F6 there is a designation to decrease and increase something.  I'm getting the feeling that these keys are not available on the MacBook Air, in fact they are not present on my bluetooth keyboard I use on my Mac Mini.   I am curious what there function would be and what device they are used for?

    F5/F6 keys are there to decrease/increase keyboard backlight.
    There are some models of Macbook Air that came without keyboard backlight.
    So those keys are not "functional" in those models.

  • Macbook Air Mid 2013 - Keys freeze up now and then

    Hey there, I'm getting a little bit paranoid as I'm wondering if I have a key logger here on my Mavericks installation (10.9.5) on this macbook air; but every now
    and then when I'm in Outlook or some Chat client working away - suddenly - some keys stop working ! Like the Delete key does not remove previously typed
    letters, or the Letter "A" stops working, then -- after 30 seconds or so it comes back!?
    Do other people experience sudden keyboard freezes like this? trackpad works fine.. It's a Mid 2013 with i7 1.7GHz and 8GB of RAM.. so it has no performance
    issues, as it runs outlook and some office apps. I patched up Office to the latest version too.
    So very weird, my next step is Yosemite and crossing my fingers or the apple store?
    c

    Thanks tool, looks great. I will give it a go, i think you are right - it could be some errant IT tool that my company has installed, they have some terrible
    Casper suite (which i deactivated), perhaps it's throwing up some Interrupts.. no clue, but Activity Monitor tells me zero.
    Thanks again , will be downloading the tool shortly!
    c

  • Re-installing Photoshop CS5 on new Macbook Air    Says license key is invalid.

    I am moving software from my MACBook Pro to a new MACBook Air and when I installed CS5 it told me that my license key is invalid.    Its a good license and I don't know why this message is coming up.
    Thoughts?
    Rick

    you need to double check the program/suite name that you purchased.
    you can check your account if you purhased from adobe, https://www.adobe.com/account.html
    otherwise, adobe support may be able to tell your product name given your serial number,
    https://helpx.adobe.com/contact.html

  • Problem with my macbook air brightness control key

    i have a problem with my macbook air.my brightness control key ( F1 & F2 ) dont work.what can i do ?

    If keys on your keyboard don't work:
    http://support.apple.com/en-us/HT203162

  • MacBook Air (2012) suspend and backlight problems

    My (late 2012) MacBook Air 13" seems to go to some sort of odd suspend when screen at near fullest extent of hinge and/or when headphones are plugged in. I can't find a consistant way of getting it back up. Sometimes open and closing the lid works othertimes not. Is this a known issue or just dirt in a sensor type thing?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • MacBook Pro Keyboard Function Keys & Backlight Stopped Working

    This is a repost of an older thread, however i am having the same exact problem and i know i am not the only one.
    Origionally posted by FIDO2010 -
    "Problem: The keyboard function keys (i.e. screen brightness, audio volume etc.) and backlight no longer work in Windows 7 (64-Bit) running Boot Camp 3.x. I also had the identical problem with Windows Vista (64-Bit) running Boot Camp 2.1.
    Oddity: When I first installed Windows 7 and Boot Camp 3.x (same with Vista and Boot Camp 2.1), the keyboard and backlighting worked perfectly for about 3 Shut-Down/Re-Starts.
    Points of Interest: I use a Logitech MX Revolution 2.4GHZ mouse and a Microsoft Blue Tooth Presenter Mouse 8000 with this machine. When I had this problem running Vista 64-Bit and Boot Camp 2.1, I assumed the problem was created by installing the drivers for these mice (suspecting that the mouse drivers over-wrote the Apple keyboard driver); however, I installed NO mouse drivers when I deleted the Vista 64 Boot Camp partician and created the "fresh" Windows 7 (64-bit) / Boot Camp 3.x partician.
    I have tried the obvious of un-installing/re-installing Boot Camp, running the Boot Camp driver in repair mode, and manually replacing the keyboard driver itself. None of which have worked.
    Solutions?"
    Any insight will be greatly appreciated. this issue is driving me crazy. Must have installed windows a good 30-40 times in the past couple months. thank you

    As you all are probably well aware, this exact problem has been asked on a countless number of discussion boards and each is answered with a different "solution." Quotation marks are necessary because the solutions suggested work for some users but don't work for others. So, in a way, I offer those who read this reply this same disclaimer. The following solution worked for me (for now!) but it may not work for you.
    Just like those other users, my volume and brightness function keys on my Macbook refused to work after installing the latest Bootcamp updates and after restarting Windows 'x' amount of times. In addition, trackpad scrolling, which worked great after one of the updates, also did not respond.
    Here's what I did to get them working again, and it's rather simple. Find the Bootcamp application in Windows. Mine was housed in Program Files but yours may located be somewhere differently. Right-click the application and select Open. In my case the screen went black and the resolution downgraded to 800x600 or lower when the images on the screen returned so keep this in mind if or when you attempt this. The screen is significantly cropped so you may have trouble navigating to the Control Panel to fix the resolution to your liking. Anyway, now my brightness and volume function keys and trackpad scrolling work properly.
    I should mention one or two more bits of information before I sign off. To start, I cannot say if this trick continues working after restarting Windows. Also, I do not know if this process is something you have to perform everytime you run Windows. In any case, let the world know if this or any other solution fixes this stated problem for you.

  • Key removal macbook air 2011

    Hello
    I spilt a small amount of coffee on the keyboard of my macbook air
    Now two keys don't work (comma and period) and the spacebar is a little bit stiff too
    Should I send it for service?
    Or should I try to remove/clear the keys by myself?
    Has anyone done that?
    Thanks

    Yes. Computer should be sent in for service.
    Note
    http://support.apple.com/kb/HT3425?viewlocale=en_US#
    Best.

  • Why arent my number keys working on macbook air

    my number keys not working on macbook air
    same with keys  q-o     hlp pls

    Still pictures or video?
    I think there are challenges when still cameras produce movie files, compared with camcorders.
    I have a Kodak PlaySport and the only way I can get my iMac to recognise and read the QuickTime HD movie files is to plug the SD card into the computer, and then Import directly from iMovie.
    It works fine but is different from the way I import any other movie files - for example, from my Canon S90, where the system reads the files into iPhoto, from where iMovie picks them up.

  • Does anyone know if I can change the font on Word to 13? When I highlight the text and type in 13 it automaticall reverts back to 12. I have a MacBook Air.

    Does anyone know if I can change the font on Word to 13? When I highlight the text and type in 13 it automaticall reverts back to 12. I have a MacBook Air.

    hit command + A to highight all text, type in 13 in the font size box.

  • Clean install issue on Macbook Air

    Hi, I restarted Macbook Air on USB key, formated with disk utilities, and when I try to install Mavericks, installer is asking me to launch App Store to update Flash Storage Firmware to 1.1
    As I formated my HD for clean install, how do I launch App Store app ??.. :-)
    Why does the installer doesn't have checked that BEFORE launching disk utilities or formating ??..
    What can I do ??..
    Thanks
    George

    D/L from here: http://support.apple.com/kb/DL1690

  • TS1388 Upgrade macbook air late 2008 to mavericks not working

    I have a late 2008 macbook air and im trying to install mavericks, when i press download and install on app store it says it cannot be installed on that macbook air. but according to the specs on the apple webpage its compatible with mavericks. im currently running snow leopard. I tried to make a bootable disk using disc utilities, everything is done correctly and i start up my macbook air holding option key and choose my bootable USB as startup disc, but i just get a circle with a line through almost like a prohibited sign. What must i do?

    Check that your computer is compatible with Mountain Lion/Mavericks.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook Air (Late 2008 or newer) model number 2,1 or higher

  • How do I stop the MacBook Air trackpad from sticking?

    I recently spiiled some syrup on the keyboard and trackpad of my MacBook Air. The keys seem to be sticking a little (they take make a different sound than before, and they take longer to pop back up when pressed), but the trackpad is completely stuck. I can still use it, but it doesn't make the same clicking sound, or pop back up when pressed. I can click something if I apply enough pressure, but I'd like to have it back to normal. Please help!

    it's pretty much only a matter of time before your gear shorts out since that much spilled
    it will be out of warranty work, but take it to apple or a repair shop you trust and have it repaired
    or, if you're handy, find an ifixit teardown guide and try to clean/repair yourself

  • Mid 2011 macbook air. command key has popped off and is now missing the 2nd metal bar. can this be replaced?

    The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
    Can you buy replacement metal bars? should I just remove the other bar completely?
    Thanks in advance.

    Sorry, must have been the crackpipe I smoked last night! LOL
    You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
    ADDENDUM STEP:
    This step should be placed between 9-10.
    Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
    IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
    Apologies for missing this.
    Best,
    WBN

  • My Macbook air (only 2 months old) has a black screen and I cannot see to get signed on, the keyboard seems to be on as I can see via having put on the Caps key which lights up and also the power cable when connected is at green how do I fix this?

    I have been faced with a Black screen this morning when I have gone to sign in/open my Macbook air this morning.  I can see that the keyboard seems to be on as the caps key when pressed is lighting up as is my charger cable link, however have noticed that the apple logo is not lit up.  Any thoughts?

    Try resetting SMC and NVRAP and then reboot.
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/PH4405
    Try booting the Recovery Partition.  Power off, boot and then hold down the Command and R keys.  Is the screen still black?  If so it is not a software problem so take it in for diagnosis and repairs.  Make a Genius Bar reservation http://www.apple.com/retail/geniusbar/ or find an Apple Authorized Service Provider https://locate.apple.com/country .
    If you are running Mavericks try upgrading to 10.9.2.  It has a fix for black screen problems.

Maybe you are looking for

  • Problem with import tag in xsl files and include in xsd files

    Hello, I've been developing an application using JBoss as server. Then, i created an especific path for xsd and another path for xsl files. In both cases, i created a main file that include (xsd) or import (xsl) the other files. My problem is that i

  • Nikon D300s RAW - cannot open

    I just got the new D300S ("s" is significant) and can not open raw files in PSE taken with the new camera. The D300s was just released September 2009 (this month). My old camera, D70 continues to work fine. I updated to latest RAW driver - ver 5.4, b

  • Oracle 10g over Windows 7 - ORA-12514 TNS:listener does not currently know

    Dear, I installed Oracle 10.1.0g over windows 7, now during installation its show me ORA-12560 TNS protocol adapter error, I ignored it for many dialog. then devery thing goings well. Once I try do login via sql plus, new message appear "ORA-12514: T

  • Transfer Muse Webmail to another mail

    Hi everyone, I have an issue with my adobe Muse web mail. Currently, i have my domain name to a register (GANDI), my hosting is in ADOBE BUSINESS CATALYST. And i have my mailbox in ADOBE CATALYST too : [email protected] Now, i would like to buy a new

  • Weblogic.utils.AssertionError: weblogic 8.1 SP4 cluster

    Hi, I'm try to run a junit test from eclipse that runs a method in a bean deployed on a WL8.1 SP4 cluster. There are other posts for AssertionErrors in the firum but none have this particular error, the only references I could find to it were BEA rea