MacBook Air 2011 - Best Buy stocking them

I was in a Naples store this morning to buy one but they did not have them in stock yet. Anyone know when they will be available at a store?

dont know they were on the website yesterday but now their not

Similar Messages

  • I bought a macbook air in best buy "open box"

    I dont have imovie or iphoto... and I really want them, what can I do?
    Thanks in advance

    If you have done as SP Forsythe queried, since the computer was an open box, it may have been registered already by the person who originally bought the computer and then returned it. You may have to call AppleCare to get that straightened out.

  • How do I connect my MacBook Air 2011 to a projector?

    How do I connect my MacBook Air 2011 to a projector?

    It depends on the input connection for the projector, but since many are rduced resolution, VGA seems to be the prevalent common connection.
    It's just a matter of buying the adapter that adapts VGA to the Mini DisplayPort/Thunderbolt port on your Air. If it is a DVI or HDMI connection input on your projector, the online Apple Store carries that as well.
    This adapter and sufficient length VGA cable is all you need for VGA.
    Here's the DVI adapter.
    For some reason, I am unable to bring up the Moshi HDMI adapter on Apple's site.

  • MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

    I have a MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

    d Pacifist to reinstall both the Safari
    application and the WebKit framework
    was that before the 10.4.6 combo was applied?
    Nope, I tried the Pacifist route after applying the combo update.
    It does sound as if webkit is busted at the moment.
    What version of osx is on your install disks?
    Not sure, I'll have to check them.
    I'd like to avoid a archive & install, but I'm beginning to think it's my only remaining option.

  • Is the Macbook Air 2011 able to run the Apple Cinema Display 30" ?

    Hello Everyone.
    So, I am about to buy a Macbook Air 2011 11".
    I want this product because of the ssd driver and the versality of such a light object.
    The things is that i work at school with a laptop, and when i come back home, i use my Apple Cinema Display on my Macbook Pro with the Dual Link dvi Adaptator (which cost me 98€ ouch !! ).
    So i read that there were kind of retro-compatibility between Thunderbolt and Mini-Display Port on the new Mba.
    Is the 2011 mba able to run my external display ?
    Thank  you.
    Nicolas.

    Yes.
    (60424)

  • How can I get HDMI out from my macbook air(2011)?

    How can I get HDMI out from my macbook air(2011)?

    It's rather simple. Buy a Mini DisplayPort to HDMI adapter. And then a HDMI cable long enough to link your computer the distance between both devices.
    Adapter
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?mco=MTY3ODQ5OTY
    Example Cable (buy longer one, if needed) You can these practically anwhere that sells HP TV's
    http://store.apple.com/us/product/MC838ZM/A?mco=MTY3ODQ5OTY

  • My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • HT4718 i have two drives, 80GB and a 2nd Windows drive 40GB.  I'd like to get rid of the 40GB and go back to original 120GB, MacBook Air 2011,  OS X 10.7.5  is this doable?

    i have two drives, 80GB and a 2nd Windows drive 40GB.  I'd like to get rid of the 40GB and go back to original 120GB, MacBook Air 2011,  OS X 10.7.5  is this doable?

    If you used Boot Camp to install Windows you may use Boot Camp to remove it and return your drive to as it was.

  • Connecting Macbook Air 2011 to Epson projector for Keynote

    Hi,
    I'm trying to connect my Macbook Air 2011 to a brand new Epson (Powerlite 1760W) projector for Keynote presentations.
    I bought the recommended Monoprice mini cable from the Apple store but I can only plug it into my MBA (small squarish socket), the other end dosen't connect to the projector. It seems the projector wants a VGA cable into it.
    I'm lost. Do I still need the UBS cable between the two? Do I need a USB / VGA cable instead?
    Thanks in advance.

    Alison,
    In looking at the technical specifications (on Epson's site) for this device it would appear that you can make HDMI work - http://www.epson.com/cgi-bin/Store/jsp/Product.do?sku=V11H361120&BV_UseBVCookie= yes
    That being said, the HDMI end on the adapter and on the projector are most likely female. So you'll need an HDMI cable (the length will vary on how far the machine is away from the projector) but I suspect a 3 or 6 footer would work just fine. The cable is a male-to-male.

  • Is there a difference between the USB ports on an imac 2010 and macbook air 2011?

    Hello,
    I'm asking this question on behalve of a severe disabled friend.
    He has a special keyboard on USB.
    When I connect it to his or my iMac 2010, we need to reboot several times until the KB is recognised.
    When I connect that same KB to my macbook air 2011 it has no issues at all.
    The iMacs are 2.7GHz i5 running Lion.
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    The MBA is a 1.8GHz  i7 running Lion.
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    the keyboard info can be found at http://lucykeyboard.com
    Would appreciate some help as a few shops in Belgium are not that helpfull for this kind of troubleshooting.
    Thank you in name of Mario.
    Peter LOX

    Guy would this be of any help:
    To start up your computer in Apple Hardware Test:
    Press the power button to turn on your computer.
    Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
    Note: Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.  An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature.
    It takes a minute or so for Apple Hardware Test to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
    When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
    The Apple Hardware Test console appears. You can choose which sort of test or tests to perform:
    To perform all of the basic tests, click the Test button or press the "T" key or the Return key.
    To perform a more thorough diagnostic test, select the "Perform extended testing" checkbox under the Test button before you click the Test button.
    Your test results will appear in the window in the bottom-right of the console.
    To exit AHT, click Restart or Shut Down at the bottom of the window.

  • I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    I just installed MacOS X Yosemite on my MacBook Air 2011.  After installing Yosemite I installed the Photoshop Elements 12.1 upgrade, but now when I open the program and try to use the tools, the program freezes.  How do I fix this problem?

    If you use a trackpad and don't want to switch to a mouse, you can uninstall and reinstall all day long and will still have problems, but if you really want to try it, you can download PSE 12 here:
    Download Photoshop Elements products | 12, 11, 10

  • MacBook Air 2011 Fan increased after installed mountain lion

    Hi all,
    I have a Macbook Air 2011, Intel core i7. After when I installed ML I noticed that battery go down very fast (about 2:40h) and the Fan speed RPM is about 6500 all time, but I haven't any strong operation pending or App. I have the same app open since lion (Internet, chat, jdownloader) in background (skydrive,evernote,weatherhd) the same app and background task I have with Lion.
    In monitor activity all task is from 1% to 20-30% of usage.
    Any Tips?

    I only have the fan kick in when the graphics is getting hit hard (playing games, driving external displays, etc) with crappy intel on board graphics. 
    Is your MacBook Air in a protective case, skin or having anything block the vent hinge?
    Definitely sounds like the OS thinks it needs to keep running the fan.
    You might try this smart temperature desktop widget and monitor your temperature to see if there is any sane reason for the fans to be on (they are loud!).
    http://www.bresink.com/osx/TemperatureMonitor.html
    My CPU Temp A Diode reports 117 plugged into AC with no fan running on a 13" MBA mid 2011

  • MacBook Air (2011)

    MacBook Air (2011) needs 20 plus seconds to restart (about 12 seconds when new). Anything wrong?

    Could it be that you added one or the other app and driver since you bought it which get loaded during start-up? Check under Login Items in your user account, and think what other "utilities" you're running - eventually silently in the background.
    20 seconds isn't too bad. Once it's minutes, come back here.

  • Firmware update on a Macbook Air 2011

    Hello guys, i have a Macbook Air 2011 that had the hard drive damaged, i installed a new one so him only starts on the Utility Page for Reinstall the OSX...
    This version of Mac Air are with troubles to Download/Reinstall the OSX using the Utility Page, him needs a Firmware Update to fix, but i just can't open that Update on the Utilities Page, i tried to put the Update Archive on a Pendrive using other Mac, and i just put the pen drive on the Mac Air and tried to execute the update file using the Terminal, but i got the error: cannot execute binary file.
    So how i can fix that Mac?
    I can't execute the Firmware update, and without fix the firmware update i can't install the Osx, i also tried to install a new version using the USB Drive Bootable Mountain Lion, but this kinda of Macs Air 2011 only accept a custom Lion OSX, that can be downloaded after the Firmware fix..
    Hope someone can help!
    Thanks

    You replaced the the SSD in a MBA that cannot be user serviced, so that's quite an accomplishment. Your model does not require a firmware update to use Internet Recovery - Computers that can be upgraded to use OS X Internet Recovery. Here's the process you follow:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

Maybe you are looking for