Macbook Air and iBahn problem -- can't get to the log-in page

This is a new Air (2012) running Mountain Lion 10.8.2.  The location is a Sheraton hotel that uses iBahn for Internet service. I can connect to the wifi network "iBahn," and the Network preference panel shows that my Mac has been successfully assigned an ip number. I click the advanced tab and confirm that iBahn's DNS servers are now listed there. But when I open the browser and try to connect, I cannot get the hotel log-in page. I get a blank window instead. Reloading the window does not help. I have tried the usual remedies: turning wifi off and then back on again, requesting a new DHCP lease, closing and reopening the browser, trying different browsers (Firefox, Chrome), restarting the computer -- none of this works. I have tried shutting down the Mac, restarting, and signing in to a different account on the computer. The symptoms are the same -- a blank page instead of a log-in screen. I have had no trouble connecting with several other wifi networks elsewhere -- including ones that require a browser log-in page. Later the same morning, the wifi at the airport worked just fine.
Here is where it gets even weirder. I happened to have a second Mac Air with me -- a 2010 model. It logged on to the hotel network with no problems: I opened the browser and the log-in page immediately appeared.
And weirder: There was also an ethernet cable in the room. When I plugged that into the 2012 Air (with a USB-ethernet adaptor) I could connect with no problem. Finally, I found that I can plug an Airport Express into the ethernet cable and the 2012 Air will connect wirelessly through that.
What could be wrong here? I assume that iBahn works by obtaining and registering a machine's MAC address. Using wifi, Ibahn was able to get the MAC address from the older 2010 Air and from the Airport Express, but not from the 2012 Air. But the 2012 Air could provide its MAC address through a wired connection. Any advice would be most appreciated. Though I was able to come up with a workaround, I want to ensure that this doesn’t happen elsewhere.

That's a good question. The page appeared to be blank. I didn't know it was possible to enact the page source view feature in Mountain Lion. That is good to know for the future -- thanks.
An additional bit of information: a Windows laptop was also able to connect. I wonder if something changed in the Apple wifi firmfare that is incompatible with iBahn.
Interestingly, similar problems are reported in these forums for iPads and iBahn. And FlyerTalk has a thread about Apple laptops and iBahn: http://www.flyertalk.com/forum/marriott-rewards-including-ritz-carlton/1228814-i bahn-aggravation.html

Similar Messages

  • HT3231 I've just got MacBook pro and now I can't get pass the password section.  We didn't set a password

    Help please, my MacBook pro is asking for a password but we didn't set one

    You need to set a password. So, do this:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
    Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

  • I accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    i accidentally deleted some drivers from my macbook air and now i can not access app store and system preferences as it says the following message (You can't open the application System Preferences because it may be damaged or incomplete)

    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

    I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
    V/r "TRACER"
    CDR Harold W. "TRACER" Valentine, SC, USN

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

  • I upgraded to IOS7 and  now I can't get past the icloud terms and conditions page.  I press agree and the box pops up however I can't click on agree or disagree.  Please help

    i upgraded to IOS 7.0.2 on my ipad and now I can't get past the terms and conditions page to finish the setup.  I click agree and then a small box appears to click agree again and I can't choose agree or disagree.  I just need my ipad to work...  help

    Reset iPad and continue with update
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have an iphone 5. It has a "no sim" in upper left corner. I removed it, placed it back, restored the phone and now I can't get past the "activation" part. It's telling me to insert a SIM w/out a PIN lock. HELP!!!!!

    I have an iphone 5. It has a "no sim" in upper left corner. I removed it, placed it back, restored the phone and now I can't get past the "activation" part. It's telling me to insert a SIM w/out a PIN lock. HELP!!!!!

    Hi Michellebone,
    I'm sorry to hear you are having this issue with your iPad. Given your description of the issue and the symptoms you are seeing, it sounds like you may need to have your iPad evaluated or serviced. You may find the following page helpful:
    Apple - Support - Service Answer Center
    Sincerely,
    - Brenden

  • MD G4 can't get past the log in screen

    Trying to diagnose what's wrong with the trusty mirrored doors G4.  The light goes on when I press the power button, the chime sounds, but can't get past the log in screen, and the mouse arrow is stuck on the left top of the screen; I can't get the mirrored door to open, to try starting with the original cd; can't get to how to start it from an external drive. 
    At this point I'm not going to spend much $ to save this computer which has served as a backup device for the past 3 years,  but would like to get in one more time to make sure I have everything I want to save.  Suggestions?

    If you have enabled remote log in and know how to ssh into the Mac from another computer - reply and I'll walk you through the commands to look at the logs before you log in from the keyboard.
    If not - you should boot from a CD and try to repair the disk and possibly look at the logs using the console utility.
    Please advise if you want to look at the logs to see what the problem is or if you can fix it from using the CD's to repair the disk.

  • I can't get to the Firefox Start Page which has menu items such as Bookmarks, toll , etc

    I can't get to the Firefox Start Page which has menu items such as Bookmarks,Tools , etc.Also there is no back arrow.
    == This happened ==
    Every time Firefox opened

    '''''"menu items such as Bookmarks,Tools , etc"''''': That's the Menu Bar; see below.
    '''''"Also there is no back arrow"''''': That's on the Navigation Toolbar; see "<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u>" below. Also see the articles under "Also see:" at the end of the instructions.
    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
    <u>''Windows'' Method 2.</u> Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
    <u>''Windows'' Method 3.</u> Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See:
    http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''
    '''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''

  • The Facebook app won't let me sign on with my account. I can sign on to another account just fine. Will not let me sign on through Safari or Google either. When I put in email and password it goes right back to the log in page. Help?

    On my iPhone 4, the Facebook app won't let me sign on with my account. I can sign on to another account just fine. The first time I sign on with the FB app it goes to the news feed page, says loading, and then flipps between loading and connection error.  If I close out of that and try to sign in again it locks up on the logging in page.  From Safari or google it goes to the log in page, after entering my email and password it goes right back to the log in page.  I have tried resetting my phone, deleting and re-installing the app and everything else I can think of.  Since I can log onto another account on my phone it can't be the app, any ideas would be greatly appreciated! Thanks

    Sounds like a hard reset is in order...

  • When i try to access iwork on iCloud on my mac, i get an ipage logo with 2 options learn/get image. I already have ipage on my mac. How can i get to the file  management page?

    When i try to access iwork on iCloud on my mac, i get an ipage logo with 2 options learn/get image. I already have ipage on my mac. How can i get to the file  management page?

    Lion will only let you add documents to iCloud through iCloud.com, iCloud.com requires the iOS apps before you can use it.
    Mountain Lion will let you add documents to iCloud from the iWork apps themselves, you don't then need the iOS apps before they can be opened on another Mac.

  • I cant get past the log in page

    I download the Acobat XI pro.  I cant get past the log in page.  The response is "connect to the internet and try again".  I am connected.

    hello any one help me please tell me about flash player. http://www.shechoice.co.uk/ how can i instal flash player in window 8.

  • Saving photos on macbook air and other problems.

    Hey! i got a Macbook Air. and i got problems with it, before i could save photos on it now i can't.. and i also can't low and high the volume on it the screen starts acting weird and the same with the screen light, and some other tapping thing doesnt work what can i do?

    Good Morning ChrisBorrego,
    The resource below would be the best place to start if your FaceTime application is not working on your MacBook Air.
    FaceTime for Mac: Troubleshooting FaceTime - Apple Support
    http://support.apple.com/en-us/HT203585
    All the best,
    Judy

  • Updated osx and flash storage for macbook air and now i can't start up

    I updated my macbook air, and now when it restarts I get a circle with a line through it, then the apple, then the screen turns blue, and then it takes me right to the disk utility.  It wont boot my desktop.  Help!

    You say you updated the flash storage.  I'm guessing you just recently had it replaced by an Authorized Apple Service Center, perhaps as part of the replacement program.
    If that's true, take it back to the Authorized Apple Service Center and have them fix it so the new flash drive boots for you.  They should have done that originally.

Maybe you are looking for

  • Using columns of user defined types

    Can anyone help me display data from a column within a table which is of a user defined type - a object with 4 elements . Discoverer wont currently display the data - it says a MAP or ORDER method is required. The type is declared as : create or repl

  • Modified Spry Tabbed Panels causing a bug in Dreaweaver.

    Whenever I try to edit a page with a spry tabbed panel in Dreamweaver, I get a spiraling pinwheel, then finally,  a popup window saying, "the file SpryTabbedPanelsDesignTime.js has been running a long time"  and I have to click "no" to continue, only

  • Missing video

    Anyone have ideas on why I can no longer see video on music videos and podcasts? I can see video in the "store" and my apple tv is ok. But for some reason I can't see video anymore on my monitor. I've tried to repair the i-tunes installation and seac

  • AppleScript and VLC

    Hi, I am new to scripting and am using an AppleScript to open a udp stream in VLC sucessfully. Example below: tell application "VLC"      OpenURL "udp://@239.192.1.107:5000"      play end tell However, when I try and execute this from the terminal us

  • Finite Measurements Project template

    Hello, I am using the Finite Measurements Project template for acceleration acquisition using an accelerometer. I made changes to the project and it is working properly except for these three major points: 1)  Copy Graph- How do I put a ask user to d