Macbook Air cannot see Wifi but iPhone, iPad, and boot camp Widnows can

I just started living in an apartment with a shared wifi router. I have no control over this router and i'm fine with that since I'm just with my girlfriend here and don't have a lot of other uses for it other than simply downloading stuff and using a computer.
The problem is that literally every device I have (iPad, iPhone) can see and connect to the wireless network.  Oddly, my Macbook Air 2013 cannot see this network.  Some days I am actually able to connect and it works fine but then it'll just disappear and I cannot find it again.  I have bootcamp installed on the Macbook Air and when I switch to Windows I can see the network and can connect with no problems.
I don't understand why the Mac OS side of things fails to even see the network when this is one of the devices with probably the most powerful network card considering it's 2013 and even has the ability to connect to ac wireless signals.
Any suggestions? I would prefer to use my Mac OS side of things rather than Windows due to battery life at least, among other obvious things.

I FIXED IT!!!!
I reset my airport express (for the umpteenth time) but this time I did a manual setup instead of going through the assistant.  Changed the Channel to 10 (I am surrounded by other wifi networks using 1 and 11, so I just picked anything but 1 or 11) and configured it for 802.11g only (it defaults to b/g on the setup assistant). 
So far, no problems, and both MBA and MBP connect.
I would guess this has started to happen recently due to one or both of
- recent Lion updates
- additional wifi networks popping up in my apartment building causing some kind of interference
That's my layman conclusion anyway.
Thanks for all your help!  I feel like a heavy weight has been lifted off my shoulders.

Similar Messages

  • Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Iam not able to share internet in windows 8 from my macbook air...though my iphone ipad is connected to the hotspot well..tried everything but it seems to be different from windows 7  and other microsft operating systems setting. help!!

    Ask on a Windows forum since that's what you're having a problem with.

  • The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it?

    The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it? Marco

    Reset PRAM.  http://support.apple.com/kb/PH4405
    If this does not help, contact Apple.
    Best.

  • Problem - new MacBook Air cannot see external HD

    Hi, I'm hoping someone can help, as I have seen similar questions in the forums, but not with an answer that helps me solve my problem.
    Ok, I have a new MacBook Air running Lion (bought last year), a MacBook Pro running Leopard which is approx 4 years old and a Windows Laptop.  I use the MacBook Air for Work and when travelling (weekly with work), the MacBook Pro for home and managing my other apple devices (iPad/iPhone etc..).  I no longer use the PC, but there are loads of files both work and home, I wish to keep on an external HD for use with both Apple Laptops.
    So, the external HD used to work with the MacBook Air when I first bought it (a couple of weeks ago) and formatted it with the MacBook Air, but it couldn't be seen or used with the Windows PC.  When I formatted it with the Windows PC, I could use it with the MacBook Air but could not write to the disk.
    So I have now partitioned and formatted it with the MacBook Pro running Lion, but now the MacBook Air cannot even see the disk in Disk Utility.
    My MacBook Air otherwise runs absolutely fine with no problems, and the MacBook Air is a critical piece of kit that I use on a daily basis to do my job.  As such, I have no appetite for deleting any drivers etc... from the MacBook Air as it could originally see the disk and I do not want to make a mistake and cause myself problems.
    So the question is, how on earth do I get the MacBook Air to see the drive again in Disk Utility? So I can do the partitioning and formatting there, this drive is of no use if can only be seen by the MacBook Pro.  The drive is a portable USB powered Toshiba 1TB disk Part Number: HDTB110EK3BA.
    Am going to wait for some suggestions, my next thought is to erase everything using the windows PC assuming it can see it, and then see if the Mac Book Air laptop can see it in Disk Utility... no other options left really.
    I hope someone can help, otherwise I may be off to buy a new disk and could hit the same problems again!
    Thanks
    Alex.

    http://www.phonenews.com/toshiba-acknowledges-macbook-woes-canvio-usb-3-0-hard-d rives-18699/
    Toshiba Acknowledges MacBook Woes in Canvio USB 3.0 Hard Drives
    By Christopher Price on December 27, 2011
    Following tests conducted by PhoneNews.com, Toshiba has acknowledged an issue affecting their Canvio USB 3.0 hard drives. The issue prevents current-generation MacBook Pro and MacBook Air models from properly connecting and powering up the drives.
    Read more to see our findings, and the resulting (ongoing) investigation by Toshiba.
    We began our tests based on tips from readers like you, and went out and purchased five (yes, five) Canvio USB 3.0 drives, along with a brand new 2011 MacBook Air.
    Drive problems happened immediately, and were relatively isolated to the MacBook Air. Of all the systems we tested on, we were only able to reproduce issues on a Sony VAIO laptop late in our testing, as well as a current-gen MacBook Pro.
    Essentially, the drives failed to mount, and in most tests never even spun up on these systems.
    The Canvio USB 3.0 hard drives have sat under many people’s Christmas trees, as they were hot sellers during Black Friday. Retailers like Office Depot slashed prices on the slim, 2.5-inch drives down to $79 for a 1TB hard drive. With coupons, Radio Shack was selling the 500GB model for a mere $39.
    Canvio USB 3.0 drives tout on the box compatibility with USB 2.0 systems, including both Mac and PC. The advantage of a Canvio USB 3.0 hard drive for a MacBook owner lies in Thunderbolt. Purchasing such a drive today can achieve USB 3.0 speeds with upcoming Thunderbolt-to-USB 3.0 adapters. USB 3.0 mass storage was designed to be fully backwards compatible with USB 2.0.
    To get to the bottom of the problem, we probed the five Canvio drives purchased, in an effort to better understand the issue. And, we were able to isolate the problem; the Canvio USB 3.0 drives draw more power than the USB standard permits. The drives were drawing, upon connection, slightly more than the five watts that the spec allows. And, the new MacBooks appear to promptly shut the device down because of this.
    Why? Well, Apple can assert that this is to protect the MacBook Air/Pro from a malfunctioning USB device. However, the answer really lies in tablets. Apple allows iPad and MacBook to perform a hardware handshake, which then allows Apple devices to draw 10 watts from the USB port. This is why you can charge an iPad directly on a Mac, but not on a PC.
    Apple does not want to allow rival tablet manufacturers (Android) to have the same access to Apple’s USB port. Hence, any device (like a tablet) that wants to draw even slightly more than five watts, is shut off from communicating with the Mac. We affirmed this by testing a powered USB hub. With a powered hub connected to the hard drive, and the hub connected to the MacBook, the drive instantly came to life, and worked without issue.
    This creates a bit of an odd situation; Toshiba is technically in the wrong for making drives that technically breach USB specifications… but Apple seems to be the only manufacturer to enforce this aspect (as well as breach it with their own devices).
    Toshiba, to its credit, has owned up to our issue, right down to our suggestion to them that a powered hub works around the issue. Quoting an official statement in response to our research:
    Toshiba DPD has identified an isolated USB connectivity issue between the Canvio USB 3.0 drive and currently shipping MacBook Pro and MacBook Air laptops. The issue involves the MacBook Pro and MacBook Air being unable to recognize the Canvio USB 3.0 drive when connected directly to the laptop USB 2.0 port. Toshiba is actively working to remedy this USB connectivity issue. In the interim, Toshiba recommends MacBook Pro and MacBook Air users employ a powered USB hub to connect their Canvio USB 3.0 drives.
    We have asked Toshiba if they intend to inform retailers to accept returns for affected drives, or if they will offer some form of refund program in the interim. Retailers such as Office Depot do not permit refunds on opened technology items, including Canvio drives. Toshiba has said are looking into that aspect of this problem, and will get back to us shortly.
    In all, we spent a few hundred on hard drives, and confirmed the issue. Unfortunately, because it is a power drain concern, Toshiba will likely have to offer an exchange program to fix it. We seriously doubt that this can be fixed at the firmware level. Theoretically, it’s possible a USB cable replacement might be able to mitigate this issue however, so there is hope that Toshiba won’t have to recall a bazillion hard drives.
    Update: As a follow-up, Toshiba has informed us that they have completed their investigation, and will replace affected drives.

  • MacBook Air connects to WiFi but can't connect to internet for about 5 minutes

    I have a MacBook Air running Yosemite and whenever I wake it from sleep or turn it on it says it's connected to wifi, but it's usually about 5 minutes before anything will load.
    • Happens on multiple wifi networks
         • and doesn't happen to other devices on those networks
    • Been going on for ages (since Mavericks)
    • Diagnostics says nothing's wrong
    • Still happens on other users and in safe mode.
    Does this happen to anyone else / does anybody know a way around it?

    Hi jamang1999,
    For that specific issues where you are connected to the internet after waking your MacBook Air up from sleep and it is not connecting to the internet, then take a look at the article below to troubleshoot the issue further. There is a section called Symptom: After restarting or waking from sleep, my computer might not connect to the Internet and go through those troubleshooting steps to see if it continues afterwards. I know that the troubleshooting is for OS X lion and previous version of OS X but the troubleshooting is still relevant. If it does not work and are still experiencing issues, then you may need to contact Apple for additional support. 
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    https://support.apple.com/en-us/HT202222
    Take it easy,
    -Norm G.  

  • TS4002 why doesn't deleted mail on my MacBook Air show as deleted on my iPad and iPhone

    I thought that when I deleted mail on my MacBook Air, it would be deleted automatically on my iPad and iPhone. However; this does not happen, and is annoying having to delete from each individual device. How can I rectify this problem please?

    10.6.8 (Snow Leopard) does not support iCloud, are you actually on that or have you upgraded?
    Are you using a .me or .mac address, if not what are you using?

  • My late 2010 macbook air suddenly crashes, show a blue screen and restart. What can i do to solve the problem?

    My late 2010 macbook air, suddenly shows a blue screen and restart. I´m tired of loosing my job. Someone can help me?

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/]
    or this one
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • Ipad cannot see airprint but iphone can

    I have a Epson WF-2540 airprinter which I can see and print with from the iphone and one Ipad but not the second Ipad. Frustrating.
    Thanks, John

    Interesting.  First, are you sure all the devices are on WiFi, and on the same network?
    Next, here's an idea:
    There is an app in the App Store that I recommend you get.  It's called Epson iPrint.  Several things would be interesting here:
    1.  Does iPrint see your Epson printer from the iPad that AirPrint is not working with?  That would be interesting if it did, though frankly I don't know what to recommend if it does.
    2.  From the iPhone or iPad that does see the Epson, open Epson iPrint, and go to Maintenance (Lower left) > Printer Settings > Firmware Update
    See if your printer needs a firmware update.  You can determine this and indeed update the firmware right from the iPrint utility.

  • Air play Icon Missing at Iphone, Ipad and I tunes.Hi, I have a Denon AVR 2112CI and says that support Airplay feature. I can not play any music trought the Denon receiver.

    Hello . jus ask for help. I installed 2 Denon receivers AVR 2112ci.  This amplifiers says built in airplay feature. I can not do anything. The airplay con not appears at Itunes in my toshiba lap, and same happen with my iPhone and with Ipad.  Some says that we need to turn on Home sharing . I did it, but icon still missing.
    The only thing that i want is stream my music with Denon amplifiers at those 2 diferrent zones.
    Please any help ?

    Hello . jus ask for help. I installed 2 Denon receivers AVR 2112ci.  This amplifiers says built in airplay feature. I can not do anything. The airplay con not appears at Itunes in my toshiba lap, and same happen with my iPhone and with Ipad.  Some says that we need to turn on Home sharing . I did it, but icon still missing.
    The only thing that i want is stream my music with Denon amplifiers at those 2 diferrent zones.
    Please any help ?

  • My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    Are you testing in the same room as the TC?
    Power cycle the TC.. does it show up now?
    Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
    Is the TC new? If old how old?
    If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
    Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
    Use WPA2 Personal security only.
    Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
    Tell us how that goes.

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • Hello! I have configured my Wireless network to support bonjour protocol. When I support mDNS in the same Vlan I can see the Apple TV with my iPhone, but I cannot see it with my iPad.

    Hello! I have configured my Wireless network to support bonjour protocol. When I support mDNS in the same Vlan I can see the Apple TV with my iPhone, but I cannot see it with my iPad. Someone know if there is any different in the Bonjour protocol between the iPhone and the iPad???
    It is like if the iPad changes the process at some point...
    Thank you!

    You don't need to configure anything specific for it to work unless you had some special filtering in place already.
    What do you mean specificly by can not "see" it with your iPad?

  • "I have a 5th generation time capsule. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal.

    "I have a 5th generation airpot extreme. All of my wifi devices (iPhone, iPad, macbook) worked fine until the other day when everything but my laptop stopped receiving a wifi signal. I shut down my Mac, unplugged the modem, router, let sit for 10 seconds, started it up and 'presto' everything worked.  Then yesterday all but the macbook stopped receiving wifi again.  I tried the same scenario as the other day but nothing.  I reset the airport extreme to factory settings and still nothing.  Is the airport extreme not working?

    If it was not working the Mac would not get a signal. Restart the IOS devices and reconnect to the network

  • I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

    I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

    The problem is that all services are bundled with your Apple ID ([email protected]):
    Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
    also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
    and the iTunes Match services.
    (I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
    If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
    iCloud (Settings > iCloud) with her account (e.g. [email protected])
    and
    iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
    In this case she gets access to your library and could use the same iTunes Match account.
    (See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

Maybe you are looking for

  • Satellite A350-12D PSAL6E: how to boot Win 8.1 without pushing power button

    Hi, is there a way to boot the OS(WIN8.1) [system status: shut down] without pulling the screen first up and pushing the power button? FYI: I 'm using a external HDMI connected monitor/screen! I know of the feature wake on keyboard via BIOS, but usin

  • Plott one data serie on a secondary axis with ABAP code

    Hello to all from Portugal. I´m using for the first time the functionality of the graphics is SAP. I want to plott one data serie on a secondary axis by ABAP code but I´m having some difficulty. The following SAP help site describes what I intend to

  • Using dummy task to synchronize other tasks

    Hi, Environment: NIDAQmx 7.4 - ANSI C Is there a way to use a dummy task to synchronize the starting of other tasks?   What I need to do is to make sure that multiple tasks (AIN, CTRs) are simultaneously started.   I was hoping that there might be so

  • Expandable list - Table of Contents -  Please Help

    I used the code found on the following page to create an expandable list that worked great:        Expandable list :  at www.learningmovabletype.com I created a table of contents for our Policies and Procedures that showed the main topics and when cl

  • Problems with icon object

    Hi! I hope someone can help me with the icons object. When I use the following code (document level) in a PDF file  I created (with Acrobat 8) app.alert (this.icons.length) try { app.alert (this.icons[0].name) catch(e) for (var i in e) app.alert(i +"