MacBook Air connected to a Laserjet Pro MFP but not printing

Hi, I am trying to print from an HP LaserJet Pro MFP M-125a which is connected to a MacBook Air via a USB cable. The software has been downloaded and the print job window is always showing as if it is in the process of printing the print job given but no printing is issued and the print job is seen as done. Can you please tell me what's wrong why the print outs are not coming out?
This question was solved.
View Solution.

Hi @Lilium ,
I see that you are having issues printing through the USB connection. I would really like to be able to help you resolve this issue.
Did you download and install the full software solution or run the Apple Upates?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (LaserJet Pro MFP M125a )
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
How is the printer name listed?
If the issue persists, please try the following steps:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Try printing again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

LaserJet Pro MFP M125a not printing

Hi,
my relatively new LaserJet PRO MFP M125a stopped printing today. Scan function is still working. All lights are on. Cannot print test page. When I try to print Word or PDFdoc, spool is empty, no job is waiting.
Uninstaled all HP software and drivers, cleaned registry, installed it again. Nothing. Changed USB cable, it worked for few pages, then turned off. When I turned it on, problem is here again. Changed USB cable again, but no luck.
Windows is fresh, new HP drivers...
Help is needed.
Best regards,
Nikola

Hi @MaletaBG,
I would like to help you with getting the printer, printing again.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
HP Color LaserJet Pro MFP M176n Printer, and HP LaserJet Pro MFP M125, M126, M127fn, M128fn, and M12...
Please try the steps in this document to see if it will help resolve this issue.
HP LaserJet Printers - 'Printer is offline' Message Displays on the Computer and the HP Printer Will...
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet pro mfp m125nw not printing on windows 7

I have attempting to install this printer on my Windows 7 PC both as a wireless printer and as a straight USB connection .
with wireless turned off.
Although the implementation always appears to execute successfully I am not able to print from the PC.
No errors are displayed and when doing a test print the print output appears for a split second in the printer's print queue and almost immediately is deleted and disappears.
I have turned the firewalls off (Norton 360 and Windows Defender) while doing all this but still no success.
I have run a variety of printer diagnostics (Windows Fixit, HP Print and Scan Doctor) and they all indicate everything is setup correctly.
I then attempted to install on a 2nd PC with Windows 8. This successfully installed 1st time and have now installed both as a wireless networked printer and as a USB standalone connection and everything works fine without any problems.
I don't understand why I can't successfully install on my PC with Windows 7 - in particular as a standalone USB connection.
Any ideas where I'm going wrong?

Hi @DavidJS ,
I see that you are experiencing issues printing from the Windows 7 computer over a wireless connection and USB connection, but the Windows 8 computer is working. I would really like to be able to help you resolve this issue.
Clear the Spool folder and restart the Print Spooler. How to Clear Current Print Queue In Windows Vista & Windows 7.
Try printing again.
Try these steps for printing over the wireless network.
I would power cycle everything.
Turn the printer and computer off.
Disconnect the power cable on the router for 10 seconds, then reconnect the power cable again.
Turn the computer on, then the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print out a configuration page to find out what the printer's IPv4 address is.
Check the port showing on the computer, to make sure it matches.
From Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
Click on configure port to view the IP address.
If the IP address doesn't match then create a new port with the new IP address.
Close the configure port window.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Test the printer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Wireless Connection Problem with Laserjet Pro MFP M126nw (HELP) :(

I have Laserjet Pro MFP M126nw just bought it last day.
Everthing working fine but i can't able to connect it to my wireless router via WPS PushButton or PIN tried both many times but failed.
I also reset my Router even changed the security level to
·  WEP key encryption using either Auto or Open authentication
·  WPA and
·  WPA2
Tried many times but it says connection failed on the LCD Display.
I have Linksys WRT120N wireless router.
Please help its urgent!

Hi @AjayKareer,
I understand that you are unable to setup the printer on the wireless network. I can help you with this.
Make sure the network name doesn't have any spaces or special characters. The printer won't recognize it.
Restore the printer defaults.
On the printer control panel, press the Setup button.
Press the Right Arrow, to select the Network Setup, and then press OK.
Press the Right Arrow, to select the Restore Defaults, and then press OK.
I have provided a document with some steps for setting the printer up on the network.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
Configure the wireless by a Ethernet connection if the issue persists.
Print a configuration page to get the printer's IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in the password and type of Encryption if you have this setup or Open for no password. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Then run the installation.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New Laserjet Pro M476NW Will Not Print MS Word or Excel Files

I just bought a brand new Color Laserjet Pro MFP M476nw printer. I am usint MS Vista 32 bit and MS Office 2007.
The Printer prints images, emails and I can make copies, etc, but I cannot print Word files, Word Envelopes, Excel files, etc.
Until my old HP Laserjet 4P finally died the other day (internal electrical short) I could print everything. Have spent 8-hours or so trying everything I have read from Microsoft, HP, etc, with no success. Installed, Uninstalled, reinstalled, ran diasgnostics, still no success.
I cannot contact anyone at HP for less than $99 to talk to a person. Very frustrating.
As I said, Word and Excel files printed just fine until I bought the new M476nw printer. How can this be Fixed?
This question was solved.
View Solution.

@DerekChristense
Thank you for letting me know that Print and Scan Doctor helped you fix your issue and you are back printing.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP LaserJet Pro m201dw suddenly not printing via ethernet (wired) network using Mac OS 10.10.1

Hi,
My brand-new HP LaserJet Pro M201dw is suddenly not cooperating when I go to print using my Mac. I had it set up following the directions which closest matched my OS and it worked perfectly for one week; today suddenly it won't cooperate. The printer is seen on the network. I have deleted and re-installed it from my System Preferences several times. I have rebooted my computer. I cannot seem to get it to work. Even the HP Utility is having difficulty. The HP Utility is suddenly slow and often needs to be force-quit as it hangs when I navigate to other applications (web browser, etc.) while waiting for it to respond to clicks. Most often the HP Utility shows the printer in the status ara as "Device Status: Unknown" and "Supplies: Unknown" which it wasn't having issues with yesterday.
Can anyone help me troubleshoot this device? Is there better documentation than the basic setup page here on HP? What about adjusting some setting in the printer web page (which I can access) - is the answer in there?
Thank you.

Hi @td2243,
I see that you are having issues printing over the wired network. I would like to help you out with this issue today.
Try and ping the printer.
On the Apple menu bar, click Go, then click Applications, then Network Utilities. (you can go to the finder and type in Network Utilities)
Click on PING from the bar at the top of the window.
Enter the IP Address of the printer and click Ping.
Did you get any replies back?
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Try printing again.
Here is some more information on this issue.
A 'Network Product(s) Not Found' Error Displays for the HP LaserJet Pro M201 and M202 Printer Series...
How is the printer name listed in Printers and Scanners? You may provide screen shots if you like.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

The printer worked on the wireless network with Windows 8.
I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
When will HP have the driver to download?

Check the support site here.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
Make sure you have the firmware update also.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Ipad wireless connection to Color Laserjet pro MFP M177

Struggling on set up. The printer seems to require a network through which to wirelessly connect to my IPAD. But my IPAD runs on 3G and is not part of any network in my office. I already have the IPAD connecting to a HP printer at home where there is a network, but not at my office location. so ive already got the HP eprint App up and running, but it cant identify the printer, which is switched on (but which is asking for me to select a network). So can anyone direct me as to how I wirelessly (no other way with an IPAD) connect my IPAD to my brand new Laserjetc Pro MFP printer ? Mny tks
This question was solved.
View Solution.

Hi,
You should either plug the printer to your network via an Ethernet cable or wirelessly by running the installation on a PC, then connect the iPad to the same wireless network as the printer.
If you do not have a wireless network at the office you may also use the Wireless Direct feature of the printer by following these steps:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03920612&lc=en&product=5445914&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

Macbook Air: connecting Canon Office All-In-One PIXMA MX330 printer

I purchased my Macbook Air a few months ago, and I selected theCanon Office All-In-One PIXMA MX330 printer to go along with it. I have tried to install the printer a few times in various ways. Initially, I used my Macbook Air superdrive to attempt to load my new printer with the included disk. However, installation requires that the printer be connected to the Macbook via USB. Since the superdrive was occupying my only USB, I tried to connect my printer wirelessly with another computer. The laptop I used was not a Mac, and I simply could not get his computer to recognize the disk for my Macbook. So I tried something else; I borrowed my school libraries USB splitter in a last attempt to connect them both to my Macbook Air at the same time. However the superdrive does not react when not directly connected to the computer...
In short, I cannot find a way to connect my Canon Office All-In-One PIXMA MX330 printer to my Macbook Air.
Help?

Connect the SuperDrive to the computer, use the Disk Utility in the /Applications/Utilities/ folder to create an image of the installation disk, disconnect the SuperDrive, plug in the printer, and install the software from the image.
(44558)

HP LaserJet M1132 MFP does not print from a remote desktop

Hi,
I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
The same error is for the HP LaserJet M1120n MFP.
I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
Please help me.
This question was solved.
View Solution.

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

MacBook Air is just flashing on and off but not working after trying updates

This morning I got notification that I was supposed to update my MacBook Air with both update for iTunes and update for Firefox.
I hit yes to both.
Now I am just getting a constant flashing on and off and blank screen alternating with brief picture of the Apple with bar underneath it.
Have turned on and off several times and still won't work.
Ideas/

Welcome to the Apple Support Communities
I don't think that the iTunes and Firefox updates could do this, but it looks like the logic board is damaged. What happens when you press Shift key while your Mac is starting?

Mac address of HP LaserJet Pro MFP M126nw

Hi People,
Recently bought HP LaserJet Pro MFP M126nw wireless printer and tried to connect to WIfi. but my Wifi is Mac authenticated and I need to configure the mac address of the printer into the network. But I dont know how to get mac address of the printer.
Need you help pls.......its urgent.
Thanks....
This question was solved.
View Solution.

Hi @Satishkumarsah ,
I would be happy to help you be able to get the Mac Address for the printer.
The configuration page lists current network summary and the Mac Address. To print a configuration page, do the following:
LED control panel:
1. From the product control panel, press and hold the Cancel button for 10 seconds.
2. Release the Cancel button.
LCD control panel:
1. From the product control panel, press the Setup button.
2. Open the Reports menu.
3. Use the arrow keys to select Config Report and then press the OK button to begin printing the report.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't install Color Laserjet Pro MFP M177fw

I'm having trouble installing the drivers for my new Color Laserjet Pro MFP M177fw AIO printer. I'm using a Sony Vaio VPCX118LG running Windows 7. I initially successfully installed the software from the disk provided some weeks ago, and had the printer running satisfactorily. About 3 weeks ago, I attempted unsuccessfully to install Office 2013 on the 32 system, and finally gave up trying and went back to Office 2010. Since about that time, I've been unable to use either of my M177s (I have two printers in my two offices in different cities; the one in Sydnay is working fine with my HP Pavilion desktop up there, but now won't work with my laptop, as won't the other identical printer in Canberra). I've tried uninstalling the software (using the Uninstall utility on the disk provided with the printer) and reinstalling. The install process seems to be proceeding normally but at about 99% complete stops with a message about a "Fatal Error". When monitoring the process using the Windows dialogue, the failure appears to coincide withthe installation of the last driver (after the Scan, Fax, USB Printer, etc...the one called, "HP Color Laserjet Pro MFP m177fw"). I've tried downloading the installation files and drivers from the HP website and installing from the disk provided, but neither method works. Can someone there offer any help, please? Claude

Hi , I think it's time to take the proverbial gloves off. I suggest you try a selective start up on your PC working directly with MSCONFIG to try and determine what, if any Windows service or program is interfering with your ability to install the drivers. Here's how: Click on the Start menuIn the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when promptedAfter you reboot, try the install again. If you're able to finish the setup we can safely assume there is a background program or service on your computer blocking the install. You will need to enable one service at a time on your computer to locate the program that's blocking your printer from printing. Here's how to undo the above-noted MSCONFIG steps: Click the Start icon.In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Normal Startup'Click Apply and OKRestart your computer as prompted. If this approach falls short I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Best of luck,

MacBook Air connected to a Laserjet Pro MFP but not printing

Similar Messages

Maybe you are looking for