MacBook Air core 7i, 8mg,512 gb and photoshop CS5 performance
Hi everyone, Still saving to buy a MacBook Air. I use CS5 for very simple work like retouch pictures and insert lines as scales. Could you tell me about yous experience with this software using a MBAir. Best regards
Well, look like I will be good with this configuration and CS5.
Similar Messages
-
Im sorry. I'm from Argentina and I'll be in New York and Boston during the first week of November. I'd like to buy a Mac Book Air 13,3 with core i7 processor 8MG Ram and 512 flash storage. I'll pick it up at the Boylston Store in Boston. I'd like to place an order for the time I'll be there
Call the Boylston Apple Store in Boston...they may have stock.
-
I am not computer savy and like my macbook air because as a college student, and father that is very busy, I don't have to learn to re-use it every month after it crashes from a virus. Am I able to load the new version of osx that icloud requires onto this computer without changing it substantially or slowing it down?
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
Windows 8 (all versions) stop several times, bootcamp 4.0 macbook air core i 5 4GB Ram, 128 SSD
Hello People.
1- Macbook Air Core i 5 4GB Ram 128 SSD. mountain lion 10.8.2 (latest updates).
2- Windows 8 core or windows 8 professional or windows 8 enterprise.
mixed with:
Boot camp 4.0 in a 35GB partition.
Results:
after complete installing the windows 8 it stops working if I install windows support drivers then stops working again.
Then I must restart required by pressing the power button for 10 seconds.
installing on a battery, not charging is OK and works good drivers updated, but when you plug in the charger for charging the MAcbook Air Battery , it stops working again.
I Confused. May be a driver ofI see that you are saying all versions of Windows 8 are failing on your system, but are you including 32-bit and 64-bit flavors? I understand why 32-bit versions might give you grief (too much RAM for a 32-bit system to handle). A 64-bit system might still have device driver issues. Microsoft does not auto-magically have all the device drivers in the world that are necessary to make any system usable. The original device manufacturers must provide Microsoft with drivers before the Windows Update servers would be able to communicate said drivers to the computers in question.
In regards to Apple devices, Apple has not yet released the device drivers needed to run the hardware with Windows 8. Apple has released the drivers for previous versions of Windows (XP SP2 and higher, Vista RTM and higher, 7 RTM and higher) to their userbase, but not to Microsoft for distribution through Windows Update (unless I am mistaken). Until Apple releases a version of Boot Camp updated for use with Windows 8, they have not yet released any form of the full collection of necessary device drivers for normal device function with Windows 8. Running compatibility mode on the Windows 7 device driver bundle via boot camp is not a fully palatable solution because compatibility mode generally is meant for application programs, not device driver services. Therefore, partial compatibility might be gained by using the Windows 7 device drivers for Windows 8 with the compatibility mode enabled prior to install. Unfortunately, much unanticipated incompatibility is equally likely with such a decision.
Some parting words on the subject may be necessary for clarification: prior to the RTM versions of Windows 8, the trial versions of Windows 8 were distributed with a much wider array of device drivers than the RTMs. This was for Microsoft's testing purposes. Furthermore, some of the architecture used during the trial period likely used Windows 7 engines more than Windows 8 engines. This means the Windows 7 drivers pack would have had more likelihood of working during the Beta and Release Candidate periods than during the final Golden Master period we have now entered. Regardless, it is not recommended by Apple (our hardware manufacturer) to use another method of installing Windows on a Mac than to utilize Boot Camp.
As Mende1 suggested, you would be wise to reinstall a previous version of Windows you may have been running. Also, given your previous post, you will want to repair your OS X installation back to full functionality prior to the Windows reinstall. For a reasonable timeline estimate, consider that it took 89 days from the original release of Windows 7 by Microsoft until Apple originally released device drivers via an updated Boot Camp. That puts a reasonable ETA for the necessary Boot Camp update at January 22nd/23rd. Even though this does not seem to apply to your situation, the discounted download for the Windows 8 Pro Upgrade will end after January 31st.
Cheers! -
My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto. THe message says, 'You can't use this version of the applicaitonn iPhot with this version of OS X. You have iphoto 9.3.2." When I try to update iPhoto, I get a message saying I signed in with a different apple ID and password. This all happened about the same time I got a new iphone. The iPhoto icon has a circle with a line through it.
southiechics wrote:
HEY APPLE! We need help with this. I'm having the same problem. What gives?
Start a new discussion and post it in the iPhoto forum.
Ciao. -
word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?
Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master -
Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?
Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?
How to Troubleshoot iSight - Apple Support
-
My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
i buy me macbook air from france by tham one and when i go back to my countre egypt it cant work and it mack to me enter password i ask my frind about that hi tell me that matherbord password and my all work in it what i do ??????????
i buy me macbook air from france by tham one and when i go back to my countre egypt it cant work and it mack to me enter password i ask my frind about that hi tell me that matherbord password and my all work in it what i do ??????????
When is the new macbook air coming..??
and what are the probable updates in both softwares and hardware..??
SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
You'll want to ask this question elsewhere. "Management" on these boards don't want these topics.
I am using a macbook air laptop, i trying to transfer my photoshop files from my macbook desktop to my laptop but it comes up with Error: 1 and advises me to contact adobe support for help.
Are you referencing your Photoshop image files, or Photoshop application files?
If the latter, cease and desist at once!
Always install Photoshop from scratch, from the original media: CD/DVD or download.
If the former, please provide details:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Why is my macbook air getting so hot, fan running, and burning through the battery fast?
why is my macbook air getting so hot, fan running, and burning through the battery fast?
I have started to experience my computer getting really hot also. Since one month back in time it has started to get raging hot (up to 99 degrees celsius) just by surfing the internet. Sometimes it stays that hot but most of the time the temperature gets lower after about 15 minutes..
this has never happend before and i am starting to get worried..
what is the problem and is there a sollution??
Why my macbook air getting so hot, fan running, and burning through the battery fast?
why my macbook air getting so hot, fan running, and burning through the battery fast?
are you playing intense games on your Air?
If so, that would be the reason
More details necessary for evaluation, please
My MacBook Air has reverted to iphoto 7 and seems resistant to upgrade. I am on OS X 10.7.5, and in the process of upgrading to Maverick. Any ideas?
Nope
for sure iphoto did not "revert" to a previous version - if the version has changed it is due to something you did and you need to share that
What exactly is your problem? To upgrade to Mavericks backup yoru system and download and install OS X 10.9.x Mavericks - then purchase iphtoo '11 Version 9.5.x from the app store and install it - tehn download and run the library upgrader (it is downloaded to the utilities folder in your aplicatiosn folder) and then launch iPhoto '11 version 9.5.x to finish the upgrade
LN
Maybe you are looking for
-
Hi Team, In Production IC AGENT Bussines role ,I have configured the bussines role.in DEV,and QA system it is working fine...in production ,iam getting error as below. Worker session error in session initialization(SAM_QUEUE NOT SET ) Type = SYSTEM_E
-
Transporter name & vehicle no.
Hey friends!!! Which table can give transporter name & vehicle no.as output? Thanx a lot. Best regards, Mili
-
How to create new view without interlinking with gantt chart or resource views
ok clear one another question In msp how to create new view without interlinking with gantt chart or resource views
-
Hello Our house move has been an absolute nightmare courtesy of BT I used the“move house” facility to organise this on 3/8/13 ref Z60M4ZZ03********** a/c ND55****** All we wanted to do was move our existing service to a new address. The new house has
-
Third party MIDI/Audio driver conflict message!@#@!#@
I'm getting the "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers" message. I'm running a G5 dual 2 gig, OSX 10.4.8, Logic Pro 7.2.3, Emagic AMT8 and RME DSP9652. When I start Logic, it hangs on "checki