MacBook Air does not finish start up and has a white screen, any suggestions?

It seems like the start up disk is full, but I can only restart or shut down

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Freeing Up Space on The Hard Drive
  1. See Lion's Storage Display.
  2. You can remove data from your Home folder except for the /Home/Library/ folder.
  3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
  4. Also see Freeing space on your Mac OS X startup disk.
  5. See Where did my Disk Space go?.
  6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Similar Messages

  • My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

    My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My macbook air does not start! I press the on key and nothing happens.

    my macbook air does not start! I press the on key and nothing happens.
    this morning when I took my macAir it would nt start and when I pluged it, there was no light indicating a charge.
    I checked the charger on my wife's mcAir and it worked.
    I plugged it back to mine and the orange light came.
    since a few hours, the plug is on with the orange light on, and still I cannot start the computer. Nothing happens!
    help!

    Try a SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    This process helps correct these power issues.
    Power
    The computer doesn't respond to the power button when pressed.
    A portable Mac doesn't appear to respond properly when you close or open the lid.
    The computer sleeps or shuts down unexpectedly.
    The battery does not appear to be charging properly.
    The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

  • My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

    Are you testing in the same room as the TC?
    Power cycle the TC.. does it show up now?
    Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
    Is the TC new? If old how old?
    If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
    Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
    Use WPA2 Personal security only.
    Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
    Tell us how that goes.

  • Hello, I have purchased and installed Lightroom 5 on my Mac Desktop.  I travel with a MacBook Air and would like to have Lightroom 5 on this device as well.  The MacBook Air does not have a CD/DVD slot.  How do I get Lightroom 5 on my MacBook Air so I can

    Hello, I have purchased and installed Lightroom 5 on my Mac Desktop.  I travel with a MacBook Air and would like to have Lightroom 5 on this device as well.  The MacBook Air does not have a CD/DVD slot.  How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?

    Adobe - Lightroom : For Macintosh
    Just download and install 5.7.1. Don't worry about earlier versions.
    You'll need to enter your serial number to license the software.

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

    How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

    dwb wrote:
    Does OpenOffice output Word documents by default or do you have to select it manually?
    You have 17 options to save as in Open Office, one of which is .doc  files,  yes it needs to be saved manually.
    You may be able to default to DOC, but have not tried same.
    Since Open Office is 99% same as Word, I use it, or Word, either one.  Open Office is a bit less buggy than Word 11'

  • MacBook Air does not See a Plantronics Voyager Pro bluetooth headset

    My MacBook Air does not "see" my Plantronics Voyager Pro + bluetooth headset as a discoverable bluetooth asset.  I have read on Apple and Plantronics forums that these two devices should be compatible, but so far no luck.  Anybody have any experience with this situation?

    Turns out the Voyager Pro Bluetooth headset failed...exchanging it for a new one and should be GTG.  Thanks.

  • I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help :(

    I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Macbook air does not see iPhone's (4S) wi-fi network

    My macbook air does not see the iPhone wi-fi network (I had been using wi-fi tethering for the last year before it suddently stopped working)
    Similarly after installing the new operating system USB tethering is no longer possible....
    Suggestions?
    A.
    PS: opertaing system:
    Mac OS X Lion 10.7.5 (11G63b)

    Try this fix  https://discussions.apple.com/thread/4884226 and please post back how it worked.  Another MBA user has reported this condition.

  • HT2801 my macbook air does not see my usb superdrive when i plug it in

    my macbook air does not see my useb superdrive when i plug it in any ideas?

    I am having the same problem and it is still not coming up supposed to be plug and play and Mac friendly?
    Slim Portable USB 2.0 External CD-RW/DVD Combo Drive

  • After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    Have you tried changing the order in Network Preferences pane?
    Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
    Hope this helps
    PJRS

  • HELP! My MacBook Air does not switch on at all

    My MacBook Air does not switch on at all. I press the "switch on" button but nothing happens. The battery is fully charged and the laptop is absolutely new (2 month of rare use). Have no idea what's wrong with it.
    Thanks in advance.

    Hi Aliyusha,
    welcome to the forums. I'm sorry to hear about your computer issues.
    Do you get a chime? dose the sleep led turn on or blink? What about the led on the power adapter, that LED on or off?
    Apple Portables: Troubleshooting MagSafe adapters
    http://support.apple.com/kb/TS1713
    Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964

  • HT2644 My MacBook Air does not detect my WiFi

    My MacBook Air does not detect my WiFi since I updated it yesterday 29th September 2012. Tried everything. Hardware test shows no trouble found. It detects all networks around me just not mine. Thank you in advance

    Troubleshooting Wi-Fi issues

  • My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT have the icon on it's desktop.  Is this normal?  If not, how do I remount the MacBook Air disk icon on the desktop?

    My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT show the icon on it's desktop.  Is this normal?  If not, how do I remount the MacBook Air "Macintosh HD" icon on it's desktop?

    Is it showing in the Finder?
    If so, then this is normal.
    Cheers,
    GB

Maybe you are looking for