Macbook air doesn't see Harmony 9000

trying to update the remote settings on a Logitech Harmony 9000.  New to Apple.  It seems that the device is not being seen through the USB port.  Do I need to do something for the device to be found?

Here's a website to figure out what device you have (Harmony 9000 doesn't seem recognized) and get the proper software.
Try going here: http://www.logitech.com/en-us/support
... and let the software detect your device.
Good luck.

Similar Messages

  • MacBook Air doesn't see wifi if booted in a room where otherwise it has access

    If I start my MacBook Air in a room close to the router and then I bring it into another room, the wifi connection remains full bar. However if I restart it in that other room, it won't find my router again; if I display the list of routers found in the area, it won't display mine and so will not be able to connect.
    If it would loose connection walking into that other room, I would think this is a range issue, but I believe it's more like a combination of range and some op system or wifi card... whatever issue, not sure.
    Also I thought it was due to the recent Mountain Lion installation, but after reinstalling Lion, the issue still remains.
    I brought it to the official Apple service and they could not find anything. They guessed it must be an interference issue with the router (doubt it, it's on channel 12, not 6 or 11) or that the router doesn't allow more connections (no such settings, plus time to time it does connect while there are no less computers on the network).
    The internal network consists of a router with DD-WRT firmware, a Dell Laptop, an iMac and 2 iPhones, all connect perfectly.
    If you need any more detail, please let me know and thank you for your help in advance!

    I was looking for an explanation of this, but apparently the MacBook Air doesn't really communicate well with a router on channel 12. As soon as I switched to channel 10 (11 was way too crowded) my problems were gone.
    Apparently there might be a problem with the MacBook Air's AirPort Country Code, but I could not figure out how to check it on mine. If you are curious and want to use channel 12 or 13, check out this thread: https://discussions.apple.com/thread/3656144
    Hope this helps.

  • Macbook Air doesn't see iPhone 5s when connected by USB

    After installing iTunes 11.1.4 on my Macbook Air, iOS no longer sees my iPhone 5s when I connect it via USB.
    Prior to the iTunes updated I had successfully synced and charged my iPhone.
    The Macbook sees my iPad and an android phone i plugged in via USB.
    Any help would be appreciated.

    Interestingly enough, my wife's iPhone 5 is recognized and will charge from my Mac, and my iPhone won't charge or be recognize by her Macbook.
    So confused.

  • My MacBook air doesn't see my router

    My Apple router started blinking, I tried to update it, but realized my computer does not see it. Tried to reinstall the Airport Utility, but I cannot install it, I get a message that it cannot be installed, get the message "the version of Mac OS X on this volumeis not supported ".

    See https://discussions.apple.com/message/16669249#16669249  It's related to this issues a lot of us are having.

  • HT4628 My MacBook Air does not see my wireless network

    My iPhone and iPad Mini see the network and connect with no problem. However the MacBook Air doesn't see the network. I tried adding it manually and it still does not recognize the network. Any ideas what I can do to resolve this issue?

    I am having the same problem and it is still not coming up supposed to be plug and play and Mac friendly?
    Slim Portable USB 2.0 External CD-RW/DVD Combo Drive

  • Itunes 12.1.2.27, macbook air, Doesn't quit and doesn't recognised just iphone6 plus ios 8.1.2.

    Itunes 12.1.2.27, macbook air, Doesn't quit and doesn't recognised just iphone6 plus ios 8.1.2.
    it does recognize iphone5 and other iphone 6

    Hi Chalmita,
    For your immediate issue of the MacBook Air not shutting down, try the following:
    OS X Yosemite: Log out, sleep, restart, and shut down
    https://support.apple.com/kb/PH18786?locale=en_US
    Hold down the power button until you see the restart, sleep, or shut down dialog, then click Shut Down, or press Return.
    If you don’t want the app windows you currently have open to reopen when you restart your Mac and sign in, deselect “Reopen windows when logging back in.”
    If your Mac won’t shut down, press and hold the power button for 5 seconds to force a shutdown.
    Important:   If you force a shutdown, you may lose unsaved changes in open documents.
    The Mac is completely shut down when there is a black screen, no active power light, and no fan or drive noise.
    What version of OS X do you have on your Mac?  It might be helpful to back up your computer with Time Machine and update to the latest version, which is 10.0.3.  Do the same with your iPhones so that everything is up to date.
    Update OS X and App Store apps on your Mac - Apple Support
    https://support.apple.com/en-us/HT201541
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    https://support.apple.com/en-us/HT204204
    Cheers!
    - Judy

  • Macbook air doesn't connect to Sharp Notevision PG-B10S projector

    macbook air doesn't connect to Sharp Notevision PG-B10S projector with OS X, same as upgraded to Yosemite

    Hi There,
    Whenever I hook up a projector that doesn't work with my MacBook (when it shows just a blank, black screen), the first thing I try is going to System Preferences > Displays and setting the resolution of my desktop to 800x600.
    Nine times out of ten, the projector starts right up and works perfectly.

  • MacBook Pro doesn't see hard drive

    My MacBook Pro doesn't see it's hard drive. It doesn't show up when I press the Option key or in Disk Utility on the Snow Leopard disc. It was working for a while and then the computer started freezing, mainly when I was using Xcode. I thought it was an OS problem originally. Then it would occasionally not see the hard drive and come up with the "?" folder. It steadily got worse until it reached where I am now, not working at all. It doesn't see my Windows XP partition either. I have reset the PRAM and NVRAM, but to no avail. The OS boots just fine when I put the hard drive in a different MacBook, so it's not the hard drive. I have taken great care of this computer, rarely taking it out of the house. I did buy it used with a backlight problem though, so I don't know exactly what the previous owner did. Any tips or suggestions would be greatly appreciated! Thanks!

    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
    Or if you have Diskwarrior or Techtool Pro use one of these utilities by booting directly from their cd.

  • I purchased a CS6 Design Standard disc and my MacBook Air doesn't have a disc drive. How do I download CS6 to my MacBook?

    I purchased a CS6 Design Standard disc and my MacBook Air doesn't have a disc drive. How do I download CS6 to my MacBook?

    Download the installer from Adobe Download CS6 products
    Install then enter your serial number.

  • MacBook Air does not See a Plantronics Voyager Pro bluetooth headset

    My MacBook Air does not "see" my Plantronics Voyager Pro + bluetooth headset as a discoverable bluetooth asset.  I have read on Apple and Plantronics forums that these two devices should be compatible, but so far no luck.  Anybody have any experience with this situation?

    Turns out the Voyager Pro Bluetooth headset failed...exchanging it for a new one and should be GTG.  Thanks.

  • My macbook air doesn't have phone under messages - not syncing

    my new macbook air doesn't seem to be syncing messages like my mini, ipad and macbook pro do.  I noticed under the Preferences, it has my two .me and .icloud email accounts, but doesn't have the phone number in there or any way to add it.
    on another note, it also won't let me connect by bluetooth to my iphone 5 (running IOS7 beta) to use my ATT hotspot - when the other's do... 
    it also wouldn't allow remote disk installation of my adobe products (when mini worked just fine over remote).
    Not sure if they are all related, but strange problems I'm having...

    HI,
    Are you talking about Messages > Preferences > Accounts ?
    You can add @me.com and @icloud.com IDS as valid AIM Screen Names.
    One can be used as the iMessages account.
    On the iPhone > Settings > Messages remove the Apple ID.
    Set Messages to Off.
    Wait a few minutes and then turn Messages back on again
    Add the Apple ID.
    Restart the Mac version of Messages.
    You should now get one or two pop ups saying the iPhone is using the Apple ID and the iPhone Number
    Accepting these adds the iPhone Number to the Receive At list of "Aliases" and the Send From (Start New Conversations from) drop down.
    9:44 pm      Wednesday; September 11, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My FaceTime Camera of my MacBook Air doesn't work in Skype.

    My FaceTime Camera of my MacBook Air doesn't work in Skype. I try to make a videocall but my camera doesn't work.

    Be sure to check PHOTOBOOTH and FACETIME in more than one user account.  However, don't use the "Guest" account for testing.  If your Mac only has one account, create a new user account for testing.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (the "reset" suggested there
       often restores normal function,) continue with the following.
    • Use your Mac's Disk Utility to repair permissions and then
       download and apply the latest Combo Update, for your Mac OS,
       the current one is at: http://support.apple.com/kb/DL1484
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight.  For hardware help, contact an Apple-Authorized Service Provider for service.
    The same Troubleshooting help for built-in iSight works for FaceTime (and FaceTime HD) cameras, too.
    If your camera works with Apple apps in every user account you test, search or post for help in Skype's dedicated forum.  The Skype users who post there may have already know the solution for your particular problem.
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Macbook air does not see iPhone's (4S) wi-fi network

    My macbook air does not see the iPhone wi-fi network (I had been using wi-fi tethering for the last year before it suddently stopped working)
    Similarly after installing the new operating system USB tethering is no longer possible....
    Suggestions?
    A.
    PS: opertaing system:
    Mac OS X Lion 10.7.5 (11G63b)

    Try this fix  https://discussions.apple.com/thread/4884226 and please post back how it worked.  Another MBA user has reported this condition.

  • Macbook air can't see time machine?

    macbook air can't see time machine?

    Can it see the external drive? Look at Section B
    Time Machine Troubleshooting

  • HT2801 my macbook air does not see my usb superdrive when i plug it in

    my macbook air does not see my useb superdrive when i plug it in any ideas?

    I am having the same problem and it is still not coming up supposed to be plug and play and Mac friendly?
    Slim Portable USB 2.0 External CD-RW/DVD Combo Drive

Maybe you are looking for

  • How to fund an itunes account for a child

    I've setup an unfunded itunes account for my 10 year old son. I'd like to fund it with $5 per month. seems there's no way to do that - the allowance is limited to a minimum of $10 per month and buying a gift card - even a "digital / e-mailed" one, th

  • Hierarchical tree

    Hi All, I have created a tree and populated it with data. I populated the tree upto the depth of 4 using Add_tree_node method. I have written a code on the trigger when_tree_node_selected. The code gets the value of the tree node and insert it into a

  • Replacing a whole Company Code

    Dear Gurus, Could you please help me in the following questions? In our businesses a Company Code is created for multiple factories (producing the same product). What processes, settings and rules do we need to keep an eye on, when we will replace a

  • I have restored a old version of a back up and have fogotten my password and mail account is not active to change password ???

    while updating my phone software it incured a problem with comunication with my current laptop i then tried by connecting my old lap top and worked. all the time my phone was in restore mode. i then updated on old laptop and restored a old version. i

  • "Reply To" option missing from OS5 BIS Email setup?

    Hi all. I wonder you can help with a slight issue I've come across. I've been setting up a device for one of our users here in the office. We've upgraded him from his old Bold 9000 (running OS 4.7 I think) to a new Bold 9700 (running the latest revis