Macbook Air Early 2008

I have an early 2008 Macbook Air that I tried to load Snow leopard but says Mac OS X cannot be installed on this computer. Any ideas why since it meets the requirements for Snow leopard?

Which version of OS X are you running now? Are you using a white retail Snow Leopard disc or a gray one from another computer? The gray discs are machine specific and can't be used on other computers of a different model.

Similar Messages

Right-click on Macbook Air (early 2008) with Windows XP?

I just bought a refurbished MacBook Air, early 2008 edition. I installed Windows XP Pro SP3 using Boot Camp, and everything is working perfectly, except tap-to-click and right-clicking using the trackpad. Both do not work at all, I've tried two-finger tap as well as three-finger tap for the right-click. I tried downloading the update driver from the Apple site, but it said "This update is not intended for this computer and will not be installed." Obviously, the update is meant for the late 2008 edition MacBooks.
One other interesting point is that Control Panel - Boot Camp does not have a "Trackpad' tab.
Anyone have any idea on how to fix this?

On reflection, all I probably need is the previous Trackpad driver; a prior version that is compatible with early 2008 edition of the MacBook Air. I have been unable to find this driver on the Apple site, would anyone know how I can go about getting this driver?

Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB

Hello, I am having a macbook air early 2008 and it is having a hard drive failure i need to replace the hard drive is it possible ? the hard drive number is HS082HB could you please help !!

You can replace it with a solid state drive, see the one OWC sells here. The video on how to install it is here.
iFixit.com has used hard drives available here.
If it were me, I'd go with a solid state drive, as the prices have come down recently and the performance improvement is noticeable.

I have an early model MacBook Air purchased 2008 with a removable back casing can I purchase and add an additional 2 GB of memory?

I have an early model MacBook Air purchased 2008 with a removable back casing. Can I purchase and add an additional 2 GB of memory?

Whether you open it or not, is completely irrelevant to the question.
All Macbook Airs have memory that is permanently soldered to the logic board, and there are no expansion slots. Hence, no Macbook Air may be upgraded from the memory configuration it had when it was manufactured.
Your system came with 2 Gb, it will always have only 2 Gb.

I have a white macbook purchased early 2008. I'm updated to ver. 10.6.8 can I upgrade to the new mountain lion and will it operate?

I have a white macbook purchased early 2008. I'm updated to ver. 10.6.8 can I upgrade to the new mountain lion and will it operate?

It doesn't appear to be Mountain Lion compatible. See below.
Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

My Macbook Pro (early 2008) won't boot, then booted, now won't boot again.

Hey all,
Summary:
My GF's Macbook Pro (Early 2008, non-unibody I believe) "died" earlier this year without notice or a cause for why, then it worked months later, then it didn't again.
Symptoms:
It stopped booting, with the only signs of life are:
The annoying boot sound that you hear right-away, like a winding sound. "Weeeeah woooo"
A fan turns on immediately after the sound.
The front light (on the open button) is solid.
The battery will light up and show how much juice is left.
The only thing to do from here is to hold down the power for 10 seconds.
Don't worry, my story gets more interesting...
Now, I had another computer and my GF didn't need her macbook seriously for a while, so I didn't research the problem or how to fix it, until last week. Perusing the various help forums and communities, I came across the reset SMC suggestion, so I decided to try a few things on Apple's SMC reset page.
I tried a couple things, including taking the battery out, and LOW AND BEHOLD: IT CAME ON, like nothing happened! The screen was fine, the performance was fine, it updated (to the new Safari and iTunes, as an example) fine, and it restarted fine multiple times. One of the main reasons I wanted to get it working was to save some family pictures we had saved, so I started uploading the images to an image cloud site. I'm sending them at full-res so it takes a while and I go to sleep around 2 am so I'm not too late into the office in the morn. When I wake up, I go to check the image upload progress and the laptop is Off. I figure it just went into standby after finishing, so I hit the power button...
And it doesn't boot again. It's back to the same issue as before. I try doing what I did last time, then resetting the SMC, but nothing has worked this time.
Any ideas? It's out of warranty of course, which is why I'm here.
Thanks in advance!

Since no one else is answering, I’ll jump in.
Your story is interesting indeed. I’m not sure I can help you fix the Mac but it sounds like there is a reasonable chance of recovering the data.
I assume it came with installation disks. Will it boot from them? If so run Disk Utility from there and try to repair the system disk.
For the hardware problems on your Mac it is time to take it to Genius Bar at an Apple store for a free diagnosis and estimate of repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .
It could be your disk failing but it sounds more like flakey electronics in the system. Let’s assume is is the system board until a Genius tells you otherwise. If so, you can simply put the working system disk in an external enclosure, mount that on your other Mac and copy the data. Here is a source for the inexpensive hardware you would need:
Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
SATA enclosure: http://eshop.macsales.com/item/OWC/ES2.5BPU2W/
There are multiple directions to go from here. Let me know what happens when you try theses first options.

HT3235 Will generic DVI to VGA adapter work with Macbook Pro (Early 2008 Model)??

I have a 15" MacBook Pro (Early 2008 model). I lost the Apple DVI to VGA adapter for use with my projector, and it appears this older model is no longer available. Will a generic DVI/VGA adapter, from Best Buy for example, work? I wasn't sure if there was anything specific to the Apple adapter? I am supposed to give a lecture in 2 days and can't find my adapter! Any help is greatly appreciated.

Yes it will, assuming that you do not have a display like the 30" Apple Cinema Display that requires dual-link DVI.

Black Screen on MacBook Pro Early 2008

Hey guys,
i have a problem. My MacBook Pro Early 2008 doesnt boot anymore. If i press the power button the screen remains black and the hdd spins a few seconds and you can hear the superdrive make a short noise. But nothing more happens.
I know from the nVidia 8600m GT issue and i even have the modelnumber A1260 but the apple reseller told me that if there comes no start sound , it is not that problem. My question is: is it possible that the (probably) defect 8600m gt chip on my logicboard has caused a defect of the whole logicboard ? I heard from a guy whos board was repaired for free but its PowerManagment Unit on the logicboard was defect but the Technical guy told him , that it was caused by the nvdia chip and so it was repaired for free. How can i find out if my chip was the reason for the defect ?
Iam not a native speaker and i hope you can understand what iam trying to say iam happy for every correction and help.
greets
max

"How can i find out if my chip was the reason for the defect ?"
By having it examined by a certified Apple technician. If necessary, show the tech the KB Article: http://support.apple.com/kb/TS2377 MacBook Pro: Distorted video or no video issues
"apple reseller told me that if there comes *no start sound* , it is not that problem."
You do not have a start sound?
Have you tried starting up from your install DVD?
If you have AppleCare, strongly suggest that you contact them first.
!http://i45.tinypic.com/jl0z95.jpg!

I need to install on macbook pro (early 2008) one hard disk 1 TB. Is it possible? What kind of HD is it better?

I need to replace the HD of my macbook pro (early 2008) with another one with 1 TB storage capability. Is it possible? What kind of HD is it better?
Thanks
Enrico

Take a look at what is offered by Mac specialists, such as OWC http://www.macsales.com and see what drives they handle. Their drives are all guaranteed to be compatible with Macs. And they have on-line videos that show how to do the installation.
Even if there are problems getting them to deliver where you live, you can get ideas of what works well with your system.

Connecting Apple TV device and Macbook Air (early version) without using a TV

Hei,
I am trying to set up my home cinema using a projector and not a TV. I have a Macbook Air early 2011 version (the one where you can only stream directly from Itunes and use a third party device to play the rest) that I am trying to connect this device to the apple tv device - but as said without using a tv. I have speakers with a console where you can run an optical digital cable from the console to the Apple TV (as this will then give me sorround sound as opposed to the airport express that has not got this option). However my computer and projector is on the other side of the room so I want to be able to wirelessly connect to my speakers via my computer.
All set up guides with the apple tv involves connecting the apple tv device and a TV with an HDMI cable. As I am not using a TV and I am not connecting the apple tv device and my projector only aiming to stream sound to the speakers to the Apple TV device I am at a loss in terms of what I need to do. Can anybody help?
Thank you!
Lene

Airplay requires both devices to be connected to the same network (wired or wireless).

I bought Macbook Air early 2014. Ever since i bought it to turn it on after a long ie. 5hr - 6hr i have to first charge it for at least 15 mins and sometimes it wont turn on for 3hr - 4hr and then it will turn on regardless of the battery charged.

I bought Macbook Air early 2014. Ever since i bought it to turn it on after a long ie. 5hr - 6hr i have to first charge it for at least 15 mins and sometimes it wont turn on for 3hr - 4hr and then it will turn on regardless of the battery charged. If i had put it on sleep even then it wont turn on it will work as usual as it is suppose to do. I went to icare twice and they game me the device back after 1-2 weeks saying it is now not giving any issue but when i will used it next morning again same thing happened. It's like i can never go out anywhere with the laptop outside as i have to first charge it and then turn it on. Icare wont replace my device they only say if there is any issue with the hardware we will replace that hardware but i think it is useless because they don't know what the issue is. Can someone help me out what to do now ? It's been to iCare ever since i bought it now i don't want them to again do the same thing.

Hi ..
Follow the instructions for resetting the SMC > Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Won't power up -- 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261

I have a 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261. I bought this used last year, and installed one of OWC's 1TB 2.5" Hybrid HD/SSD drives in it last January. No problems whatsoever until the past 2 weeks, when I started having intermittent black screens (NOT display sleep) -- sometimes the black screen would disappear by itself, sometimes I had to (Power button) shut down, and when I restarted, everything was OK. Until yesterday.
First let me note that, because I usually use the MacBook Pro in the same area in my house, I usually leave it plugged into the MagSafe power cube, and often just close the lid and put it to sleep, instead of going through start-up every time I need to access it. BTW, battery (NuPower) shows 5 solid green dots and does not seem to be a problem
Night before last, I shut down the MB Pro, and closed the lid. Yesterday, I opened up the MB Pro, and hit the power button. All I got was a brief, non-pulsing white light on the display-locking/“sleep light” button, and a sort of graunchy whisper from what sounded to me like the optical drive, NO screen activity whatsoever, and the “sleep light” went out within 3 or 4 seconds. Could hear NO HD spin-up sounds.
Tried everything I knew (not much), including disconnecting the MagSafe charger and removing the battery completely, letting it sit a few minutes, replacing battery and charger, and powering up. Same nothing, just another very brief whisper of activity from the optical drive. Being something of an “I’ll try anything, no matter how dumb it seems” idiot, I put a known, working, burned data CD-R in the optical drive. Removed the charger and battery again, waited, put everything back in. Tried to power up. Still nothing, same brief whisper from the optical drive, but the MB Pro would STILL not start up, the CD-R wouldn’t spin up OR eject, and I heard nothing from the hard drive, even with my ear ON the metal right over the drive.
My next “don’t-really-want-to-do-it” step is to remove the 1TB drive, replace it with the original 250GB drive, see if that works, and, as I have a “Newer Technology” Voyager S3 bare drive (works with both 2.5” and 3.5”) USB dock connected to my main Mac (a mid-2011 iMac, 2.7GHz Core i5, OS X 10.9.3), I’ll try using that to check the hybrid drive.
I’ve been a Mac-only user since 1989, and somehow this doesn’t seem like a drive problem. I’ve tried every OS X keyboard shortcut on the “OS X keyboard shortcuts” page, and the “sleep light” always comes on for a couple seconds, then goes out, the screen never even shows a flicker of life, and the HD NEVER spins up.
Can the forum please clue me in with any tricks I haven’t tried yet?
Thanks
Bart Brown

Thanks for the quick response. However, none of the following have worked:
Have you tried SMC and PRAM resets?
As usual, "sleep" light briefly illuminated -- 2-4 seconds -- then went out. No startup, no chime(s), no screen, no keyboard illumination, no HD spin-up.
Also try an Apple Hardware Test.
Same as above. Nada. "Mac NoteBook and Desktop computers shipping with OS X 10.7 or later have a partition on the hard drive or flash storage that contains AHT" -- since I can't get the drive to spin up, I can't access that partition... or anything else.
You may need the #2 installation disk.
Well, there I have TWO problems:
One is that I bought this MBPro on eBay, and received no disks -- it came with OS X 10.9.x installed (and is now at OS X 10.9.3). Is there any way to get “retail” install disks that will work with this MacBook Pro?
Second is that there's a data CD in the optical drive. Because the MBPro won't boot, I can't get the data CD out even if I had the 2nd Install DVD. Any way I can get this data CD out -- hatpin, barbecue skewer, fencing foil, sledgehammer?
I talked with OWC, from whom I bought the hybrid Seagate HDD/SSD 1TB drive last November. We tried a few ideas he had — mostly the same as those suggested by “Oglethorpe” (no relation to “Ogie” Oglethorpe in “Slapshot,” I hope!) — none of which worked, as I’ve already indicated above.
My last-ditch effort-of-desperation is to remove the hybrid Seagate HDD/SSD 1TB drive, and put in the original 250GB drive (never throw away a good drive!), and see if the MBPro returns from the dead. I will also put the hybrid Seagate HDD/SSD 1TB bare drive into my Newer Technologies Voyager S3 bare-drive dock, which takes 2.5” and 3.5” drives, and see if there’s a problem with the hybrid Seagate HDD/SSD 1TB drive. While no longer under warranty with OWC/MacSales, it IS still under a 2-year warranty with Seagate.
Any other suggestions gladly entertained.
Thanks again.
Bart Brown

Macbook Pro Early 2008 running slow, hot even with upgrades - what to do?

Hello!
Specs:
I have a Macbook Pro Early 2008 (Model A1260). I have upgraded both the RAM (from 2GB to 4GB DDR2 667) and the HDD (from the factory installed 200GB 5400 to a 750GB 5400).
Previous to this, I was running Leopard, and upgraded to Snow Leopard then Lion as my specs match the requirements. On the old/original HDD and RAM, All was good for about 3 months, and in the past month or two, I began to have performance issues, so after trying everything (including a clean wipe & reinstall using Lion Recovery) and doing a lot of reading in these forums and others, I decided/hoped the problem would be remedied with some upgrades (hence the new HDD & RAM upgrades).
This has helped to the point where I can now run safari without having to force reload or having the whole computer freeze (although that has now happened once), but I wasn't even able to load a youtube video.
CPU Usage:
I checked the activity monitor and I'm getting a pretty constant CPU usage of about 50% (even with no other apps running):
(The above is with just Safari, Dropbox, smcFanControl & Activity monitor)
My fans are engaged constantly (smcFanControl has my computer at 75º-80ºC at any given time that it's on).
The CPU usage & temps seems high - but I am not sure haven't found very good answers online.
Things I've Tried (Post RAM & HDD Upgrades):
I tried to perform a hardware test (holding D before the gray screen) - and both times I tried it, it did not work, as in Lion just loaded as normal.
Ran repair permissions - and some things were repaired.
Tried to run Verify Disk - no dice - the computer froze and I had to use the power button to shut it off & restart
Reset the SMC per apple support instructions - had no effect on the fans or heat (though I'm still not sure if this is a real problem or not!)
What I'm looking for :
Any ideas on what could be going on - is this just par for the course on older models running lion, or is there something more to be done?
I am really hoping to squeeze a few more years of service out of this machine! Thanks for any advice you can give me!

Incase you are using your MBP like a laptop (which it is NOT)...................
According to the user manual it states in part:
"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."

Macbook Pro Early (2008) will not turn on!

I have same problem with my macbook pro early (2008)
I think is unfair to have this problems in the "perfect world notebook"
I hope you can help me on this
Regars,
Carlos.
---- MrAngel Discussion-----
Ok. It looks like does not matter what model is but anyway here is my specs:
Macbook Pro 15'
Model: A1260,
2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
I would like you review the following posts:
http://discussions.apple.com/thread.jspa?messageID=10071744&#10071744
My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
http://discussions.apple.com/thread.jspa?messageID=10115278&#10115278
When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
http://discussions.apple.com/thread.jspa?messageID=10285598&#10285598
Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
The problem: Mac will not turn on.
1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
What I am planing to do:
1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
3. If it will be too expencive I gonna do DIY repair.
What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
Aleks

since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?

Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

Macbook Air Early 2008

Similar Messages

Maybe you are looking for