MacBook Air equivalent to windows bios

Does the MacBook air allow you to get into the computer like using the Bios on a PC? Is there something I push when the computer starts up? I have a brand new air, 2012 13 inch.

No it's not. It means that the inexperienced can't terminally mangle their operating system like they always do in Windows. It is also one of the things that makes Apple OS X so much more secure than the virus-prone Windows.
System Preferences provides all the options you should beed.

Similar Messages

MacBook Air (Mid 2013) Windows 8 via Bootcamp

Hey guys,
Just wanted to know if there was anybody who was able to install Windows 8 (or even Windows 7) on their new MacBook Air.
I heard from somebody that installing Windows via bootcamp was different for this model.
First of all,he said that you are unable to install Windows 7/8 with a CD--although it is possible, he said that you will incur with some prolems during installing, he said the trackpad and keyboard will be not functioning.
Anyways, there were many other problems he told me...
Anybody installed it? Were there any problems?

Well you must actually say what you mean. DVD or 8GB flash drive. Whether you have a USB-DVD Apple SuperDrive or something else.
BCA should walk you through. And, it has instructions! a guide to read and printout.
http://www.apple.com/support/bootcamp
FAQ http://support.apple.com/kb/HT5639
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.
Can I use an upgrade from Windows 7 to Windows 8?
Yes. Download and install the Boot Camp 5 Support Software before attemping the upgrade by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3. Alternatively, you can manually download the Boot Camp 5 Windows Support Software here.
When I do an upgrade install from Windows 7 to Windows 8, an "Uninstall USB 3.0 eXtensible Host Controller Driver" message appears. What do I do?
Do not click on Uninstall. Click the back button and Cancel the upgrade. Download the Boot Camp 5 Support Software by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3, or click here to download them. Then, try the upgrade again. See this article for more information.
After upgrading from Windows 7 to Windows 8, Thunderbolt devices are (not) being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
Is there an OS X version requirement to use the Boot Camp Assistant to download Boot Camp 5 Support Software?
You need OS X Mountain Lion v10.8.3 or later installed to download the Boot Camp 5 Support Software (Windows drivers) using the Boot Camp Assistant. After upgrading, click the Go menu and choose Utilities. Then, open Boot Camp Assistant and follow the onscreen instructions. You can download the Boot Camp Installation & Setup Guide.
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software. How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.
Model-specific Questions
I receive a "Free up space on Drive C" message when I try to do an upgrade install from Windows 7 to Windows 8 on my MacBook Air (11-inch, Mid 2012). Why am I seeing this?
There is not enough free space available to do an upgrade install with the 64 GB SSD configuration. Delete the Boot Camp partition and do a full install instead. See this article for more information.
I see a black screen or distortion when I install Windows 8 on a MacBook Pro (Retina, 13-inch, Late 2012). How do I fix this?
The Windows 8 installer does not contain the correct graphics driver for your computer. You'll need to attach the USB media that contains the Boot Camp drivers during installation to address this issue. See this article for more information.
The volume controls keys (F1 and F2) won't work on my iMac (Mid 2011). How do I control the volume?
Use the Settings Charm to control screen brightness. See this article.
My MacBook Air (Mid 2012) will not start Windows 8, or displays VGA graphics when it stats up. How can I fix this?
Your MacBook Air (Mid 2012) needs an EFI Firmware update to address this issue. Download and install the MacBook Air EFI Firmware Update 2.6.
I see a "Windows 8 is not supported on this Mac" message on my Mac. Can my Mac run Windows 8?
For a complete list of Mac computers and the Windows operating systems they support, click here.

How do you install Windows 7 on Macbook Air with a Windows 7 ISO image?

Macbook Airs have no optical drives, and I can't buy one. I do, however, have the Windows 7 ISO image. And I also have access to a Windows 7 PC. I found an article on CNET on installing from a Flash Drive, but that requires the CD. I also have a hard drive (120GB) and Flash USB (4GB), if they could help. Please help me as many programs I am familiar with are only windows-based. I am tried using open-source software like Wineskin Winery and WineBottler, but to no avail, I always end up confused with them.Please help me.

Acius wrote:
Crjohnson, I think you can really help me!
Okay, how do you use Wine? I don't want to install lots of software like MacPorts, just want the minimal software. So there are many things like Wine, WineBottler, and Wineskin Winery. What do I use for what? For example, I want to turn a windows game (Age of Empires 2 for example) into a full Mac App. How would I go about this?
I tried researching but it is so in-depth with terminal commands and all(i dont want to risk ruining my computer)
What is crossover? Is it another wine app?
Oh, and I tried Winery Wineskin...why doesn't it work? It keeps installing random things like Gecko, or Mono, but in the end, it doesn't work. Do I need the windows app's executable, or the window's apps's installation executable??
What are engines, and how many do I need to create? I think the best thing for me is to learn wine, because installing windows with bootcamp isn't worth the effort, I think, with me having only a few apps i need to run.
As for learning mac apps only, well, Windows apps dominate the market with most of applications being made for windows, especially games, with 90% market. So for some apps, there just isn't a mac version available, or if there is, it's costly. (Which you already know I can't buy things)
You probably cannot afford to buy Crossover either. It is designed for user friendliness though, but of course Wine cannot run everything.
Yes you have to learn some things to use Wineskin. Normally on Gecko and Mono prompt, just cancel them. Gecko is needed if you have a program using mshtml (its basically a replacement for Internet Explorer for programs that use parts of it). Mono is a replacement for .NET if your program requires that. You do not want to install them if you don't need them as they will just waste space. You can always refresh the wrapper later on and get the same prompts if you find out you need them later.
You can copy the full installed version of a game inside the Wineskin wrapper and try to set it up that way, but its usually easier to just run the installer and install it inside the wrapper just like you'd install it in Windows.
An Engine is something you download... its basically a specific Wine build made for a Wineskin wrapper.
If you do not want to learn Wineskin enough to get in and port your programs yourself, you can often find other people who have done so (at least with games).
Check out sites like PaulTheTall.com who has tons of Wineskin wrappers already made and ready to go for many games... you just download the wrapper, install the game you want in it using the normal Installer, then its ready to go. Many you'll need to manually update yourself to Wineskin 2.5.8 though since all the older versions broke ok the OS X 10.8.2 and 10.7.5 update, and Paul hasn't gotten to all of them yet since he has hundreds (including AoE 2 i think).
There is also Portingteam.com which has tons of pre-made wrappers for games (Including Cider hacks from official games).
If your talking about non-Game apps though, you can normally find an alternative... many of which are free.

Non-system disk error on macbook air mid 2012 windows 8 bootcamp, non-system disk error on macbook air mid 2012 windows 8 bootcamp

everytime i try to install windows 8 on my macbook air mid 2012 via usb i keep getting that error after bootcamp partition and reboot...
does anyone know how to solve it ? its not my flash drive cuz i've already tested 2, and both have the exact same error.
error:
Non-system disk
press any key to reboot
and if i try to hold the alt/option button while its starting i can get to the windows 8 install screen, but when i select the partition bootcamp to install it doesnt let me move on.. and yes i've clicked on format in the windows installer screen, and yet nothing works..
HELP.

There are no Windows 8 Bootcamp drivers yet so Windows 8 is unsupported. Go the the Bootcamp forum and read all the posts from Windows 8 users who can not get Windows 8 running correctly because there are no drivers. https://discussions.apple.com/community/windows_software/boot_camp

How do I get MacBook Air to see Windows Home Server and show it in Finder?

New to Mac (having used Windows for years) so this may be a dumb question. Have a MacBook Air (new) and have a home network with a Windows Home Server on the network. I can't figure out how to get the MacBook Air to see the Windows Home Server. It doesn't show up in Finder and I think my lack of understanding of Mac OS it inhibiting me from figuring out how to get the MacBook Air to see the server and show it so I can navigate to the files on it, etc. Any suggestions on how to do this or where I can go to read about it to figure it out?
Thanks!!!

If the Windows Home Server functions like a file server, try the following: From the Finder, Click the Go menu at the top of the screen, and choose Connect To Server. You will be presented with a dialog box to enter the server IP address.
You may also want to open the Preferences for the Finder from the File menu, and make sure connected servers are supposed to show up on the desktop and in Finder windows.
Disclaimer: I have not used a PC for 15 yrs, so this is general information. This is the process I use to connect to other Mac servers and to several online WebDav servers.

MacBook Air (2009) with Windows 7

Hello everybody, I use my MacBook Air (2009,1.86GHz Intel Core 2 Duo, 2GB 1067 MHz DDR3, OS X 10.9.3), also with Windows 7 for a software design: ( Rhinoceros 4 (all original softwares). In my case, when I use Windows 7 the temperature of the hardware is very high, I can't touch the surface of my MacBook Air as it is too hot. Anyone has some suggestions?Thank you.

Flornes wrote:
Update: I went to a friends house that has internet, booted a fresh copy of windows 7, and checked the box where apple finds updates and installes drivers etc, but I still have the same problem..
This time I did everything correct...
Any tips?
You download the Windows Support Software for your installation while you are in Boot Camp Assistant (the program you used to create the partition) it is one of the very first steps you need to take: (see below)
Go back to Boot Camp Assistant and download the software.

How do I add Macbook air to my windows network and how do I connect to windows shares from said Macbook?

Finally, I have a "clued in" boss who wanted a Macbook air. I have it, and I can get to the internet by supplying the correct proxy credentials. My issue is trying to connect him to windows shares on my network? I know how to do this cold for adding a PC, But need some 101 on how to take this awesome macbook air and add it to the domain and how to get connected to various shares within my DOMAIN. as well as use network printers (I assume that is pretty easy). . . I should add that I can ping the servers in question, I am just not familiar with how to connect to them via Mac. . .I am sure this is laughably easy, I am the king of making things difficult, I swear!
Thanks for any and all help as usual!!
Dave

Which os do you have?
Check Apple's Knowledge Base for Printer Troubleshooting solutions and suggestions for your particular os.

MacBook Air 13' and Windows 7 32-bit. Is is impossible to install all devices?

I've just installed Win7 32-bit to the MacBook Air 13'. It surprised me that Boot Camp gives drivers only for 64-bit automatically. I already find drivers, but HD Camera is a problem! No sound, no microphone, no video. What I have to do?

Hi,
This issue can be caused by Firewall on Windows 7.
Please try to disable Firewall to see what’s going on.
Also, I would like to confirm whether you have installed SP1 on your Windows 7. Since there are many fixit in SP1 to repair some issue, please install it to check the results.
For further troubleshooting, we may need the traffic package by using Network monitor on Windows XP and Windows 7 for comparing when you send the printing task to the print server.
Microsoft Network Monitor 3.4
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Please upload the saved log to a file sharing service like Skydrive or "Rapidshare" and put a link to them in your reply.
Kate Li
TechNet Community Support

HT4407 I have a macbook air, I installed windows 7, no problem.Succed, but drivers nothing, I've been looking on the internet Anyone got a solution?

Please help me,my macbook air No sound,and there are many more drivers that are not on the macbook air

You are in the worst scenario, because now you have to delete Windows 7 and get back OS X Mountain Lion. Next time you install Windows through Boot Camp, be very careful with the partitioning step, and follow the steps of this site > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
To reinstall OS X Mountain Lion, follow these steps:
1. Hold Command, Option (Alt) and R keys while your computer is starting to start in OS X Recovery, and open Disk Utility.
2. Select the hard drive at the top of the sidebar, go to Erase tab and erase the whole hard drive. Make sure that "Mac OS Extended (Journaled)" is selected next to "Format".
3. Close Disk Utility and reinstall OS X.
4. After reinstalling OS X, follow the steps of the site above to install Windows 7 on the MacBook Air properly

Macbook air logging into windows server

I am new to Apple with a Macbook air.
I do need to log into a window server 2003 R2, via external desktop. All my work is on there.
How do I do this? I am not very digital mindet.
Are there special App's or programs I need to download, I heard something about " Office" for aple?
Any help welcome.
Helmut

John4186 –
Welcome to the Mac Forms – give this link a try.
http://www.microsoft.com/mac/products/remote-desktop/default.mspx
I am still running 10.5.3 due to the numerous Mac/Active Directory issues; but I am able to access my Windows 2003 servers with this client. I am also able to make to my local (Mac) drives as well.
Best of Luck –
BH

Making a USB install disc for macbook air using a windows PC!

Ok i have an iMac and a macbook air, so this guide here seems good for me right?
How to Create a Mac Snow Leopard USB Installer Disk
The problem I've got is that my iMac superdrive is skewed, it just won't read anything (disc is new etc but the drive won't work with pretty much ANY disc at all, and i mean any, just spits them out after a few seconds of trying to read it).
Anyways, can this process as described in the URL above be done using a windows based pc? i also have one as a media centre in my room and it has a working dvd drive..... if so what do i need to do? this is driving me insane! i cannot afford an external superdrive or any other external drives at the moment nor is the iMac in warranty and nor do i have the ability to take it anywhere.

Its a long one to explain but the superdrive in the imac works when it wants, and fortuantly last time it worked with the OSX disc that came with the imac! amazing, i made the usb installer and then when booted with macbook air it stated it cannot be installed. I did a little digging and discovered that it was because the imac came with one of those grey OEM discs and are not able to transpose to another machine at all, this is officially from apple and what others have used, hence my need to then get a full snow leopord disc.
The disc however unlike the other OSX grey one will not read at all
also what i mean is can i use the drive from the windows machine to make the usb install disc not using windows itself....?

How to backup both my MacBook air files and Windows 7 files via Parallels?

Hi,
I'm new to apple support........I need to purchase an external drive to backup my files from my MacBook air but I also need to backup two main programs that i use for my business on Win7 via Parallels.
Can I use the same drive and/or time machine for both?
Or do I need to use two different methods?
Thanks in advance!
Chef Heather

Any backup utility will backup the pseudo-disk that Parallels uses just like any other file on the drive. But if you are going to do that I recommend not using Time Machine. Time Machine will backup the pseudo-disk every hour even if only one byte changed. In no time at all your backup drive will be full. I suggest you use a different utility that overwrites changed files, only.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

How to sync on new MacBook Air with 'dead' Windows notebook?

Hi dear all,
I’m in need of some good advice and assistance on the following.
Basically I just switched over to a MacBook Air from an IBM Thinkpad as it went ‘dead’.
My iPad and iPhone are sync via iTunes on the Thinkpad. Now I have a challenge, I understand if I just sync with iTunes on my new MacBook Air, it may just wipe out everything on my iPad and iPhone.
May I know are there any ways I can keep everything in my current iPad and iPhone and still able to create and sync with iTunes on my new MacBook Air e.g. in future still can add files, perform sync etc. I don’t wish to lose all the current files and contents in my iPad and iPhone.
Thanks.

Hi ..
As long as you are using the same Apple ID used on iTunes on the PC, you won't lose any content.
You will need to authorize the new MB Air.
Launch iTunes. From the iTunes menu bar click Store > Authorize this Computer

MacBook Air 2013 with Windows 8.1 installed with Bootcamp

Hello , I have a fairly new 2013 MBA 8g , 128ssd, i5 and I installed windows 8.1 with Parallels 9 but it was eating my battery life so so fast and I really didn't like the Parallels experience. I uninstalled and wiped my MBA to factory settings to get a clean MBA.
My question is if I use Bootcamp to install Windows 8.1 will that destroy my battery life just as bad when I'm not booted and using windows but booted and using the MBA OS. I believe you can boot into Mac OS or Windows at start up.
Thanks

parallels and vm ware are a well known system hog! they will drain your battery while consuming ram and resources. although this is harmless to your mac per say, once turned off the mac goes back to normallity abeit with a low battery.
the answer to your question is bootcamp does not drain your battery any more than normal use would do.
hope this helps.

How do you close a finder window on an iMac running Mountain Lion by double clicking on the top of the window like I can on my Macbook Air?

When I bought my Macbook Air in 2011, ( leopard on purchase - now mountain lion) I discovered how to close open Finder windows by double clicking at the top of the window. I have just bought an iMac (mountain lion) and for the life of me cant find out how to do the same. Finder preferences are no help. Can anyone out there be of some?
Thanks in advance

I know what you are referring to. In both cases, the window is minimized, but on your MacBook Air, your Finder window is minimized onto the Finder icon, and on the iMac, on the right side of the Dock.
To change this on your iMac, open System Preferences > Dock, and mark "Minimize windows into application icon"

MacBook Air equivalent to windows bios

Similar Messages

Maybe you are looking for