MacBook Air is just flashing on and off but not working after trying updates

This morning I got notification that I was supposed to update my MacBook Air with both update for iTunes and update for Firefox. 
I hit yes to both.
Now I am just getting a constant flashing on and off and blank screen alternating with brief picture of the Apple with bar underneath it.
Have turned on and off several times and still won't work.
Ideas/

Welcome to the Apple Support Communities
I don't think that the iTunes and Firefox updates could do this, but it looks like the logic board is damaged. What happens when you press Shift key while your Mac is starting?

Similar Messages

  • My iphone won't turn on at all and when i connect it to a charger the apple sign just flashes on and off but does not turn on?

    I've tried charging it overnight and it still will not turn on, when connected to the charger the apple sign just goes on and off but does not do anything, i've tried resetting it and this also does not work, but then once taken off the charger it doesn't even say the sign for charging it just does nothing

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • My MacBook Air keyboard has become raised and spacebar is not working!

    My sons MacBook Air Keyboard has become raised/warped. The centre point of the raised area is the top left hand corner of the trackpad. I would say the highest point is 2 to 3mm above the normal surface line.
    The first signs of the problem was an inconsistency in the spacebar operation. Now the spacebar fails to operate at all! Apart from the Spacebar the Air seems to perform all other functions normally.
    The raised area /warped area has also created a wobble when the MacBook Air is on a flat surface. 
    Model A1237
    MacBook Air 1.6 Ghz Intel Core Duo
    Memory 2GB 667 MHz DDR2 SRAM
    Serial Number W8806AVHY51
    Software Mac OS Lion 10.7.1
    Thank you for taking the time to read my issue and hopefully provide some guidance!!

    If your Air came with Lion pre-installed you might find it a bit complicated to downgrade. In any event the battery should be replaced under warranty. [My 17" battery was replaced by Apple at the Genius Bar even though the year warranty had expired; they were genuinely concerned since there was a safety issue concerning power!] On the point about your 3 Lion concerns, I note that many on this forum have dealt with similar issues. In my case I purchased a new machine with Lion rather than upgrade my existing Snow Leopard MacBook Pro 13" or iMac 27" and have found there to be no troubles whatsoever. I enjoy the speedy response and smooth execution of tasks on 10.7.2. Good luck with your battery issue. 

  • Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

    As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
    When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
    Need this fixed! Any ideas?

    Try downgrading to your older BIOS and see if it works again.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Silverlight and google chrome not working after system update

    I just did a system update and now google chrome and the silverlight plugin do not work. I've tried uninstalling and reinstalling both numerous times, restarted, and checked for updates again but nothing works. What's going on? 

    Check compatibility with their respective vendors.

  • Macbook pro 15.4 early 2011 FaceTime HD camera not working after OS update to maverick HELP!

    I have recently found out that my MacBook Pro 15.4 early 2011 model the FaceTime HD camera is not loading or is missing.
    I have performed VRAM reset PRAM reset and also looked for third party software from AirDisplay and this software is not installed. I have also performed reinstalling the combo pack for 10.9.2 still nothing. But going through my extension I did find that isight is listed and it status is not loaded.I also checked my usb and I don't see FaceTime HD camera listed. I do have automater on my Mac not sure if this would cause an issuse or not.I also tried other applications like photobooth, Facetime, Camera. Any other advice would be great.

    my computer has not been able to connect to my built-in camera
    iSight is the built-in camera.
    Help here > How to Troubleshoot iSight

  • Javascripts for gallery images and movies do not work after Apple updates?

    The javascript that opens image links and movies no longer appears to work after runing recent Apple updates. (OSX 10.4.7 and Safari 2.0.4) The pages still work fine in Firefox under 10.4.7 and also in older versions of the OS (10.4.6) and Safari (2.0.3), but nothing happens anymore when clicking on these using Safari on my recently-updated MBP. Has anyone else experienced this?

    No problem here.

  • Ipod classic try to start but the apple just flashes on and off.

    Ipod classic I try to start but the apple just flashes on and off.
    I can't reset and it doesn't show it charging. Not recognized by computer. 
    It was working just fine in my car, I stopped for an hour, and when I came back it just started the flashing thing.
    Anyone have any ideas?

    Reset it this way.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If it is  still not working.
    Then Restore it using iTunes
    Good Luck!

  • HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    Was the restore done via iTunes?
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
    If so then you may need to take it to Apple.

  • When playing WOW my MacBook air's fan comes on and stays on until shortly after I stop playing.  is

    When playing WOW my MacBook air's fan comes on and stays on until shortly after I stop playing.  is this normal?  Never comes on at any other time.  Thanks.

    Thank you, but I followed all instructions to reset the SMC and it has not helped. Looks like I'll have to take it in to Apple for repair.

  • I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

    I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

    Invoke your warranty and take it back.

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • HT4623 i now just have the apple logo on my screen after trying update

    i now just have the apple logo on my screen after trying update and itunes cannot connect to my phone.

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

Maybe you are looking for

  • My 3G iPod touch isn't recognized by iTunes.

    I've reset the iPod, completely uninstalled and reinstalled iTunes, and did the same with the driver software. ITunes recognizes my 2G iPod touch but not my 3G. The driver software installed itself as a digital camera software instead of where it sho

  • Performance for the below code

    Can any one help me in improving the performance for the below code. FORM RETRIEVE_DATA . CLEAR WA_TERRINFO. CLEAR WA_KNA1. CLEAR WA_ADRC. CLEAR SORT2. *To retrieve the territory information from ZPSDSALREP SELECT ZZTERRMG        ZZSALESREP        NA

  • How do I transfer my ipod songs taken from CD's to a new iTunes library?

    My laptop needed to be restored back to store purchase and m y iTune's library was erased.  When I downloaded the iTunes and synced my ipod, it only added the purchased iTunes songs to my iTunes library.  How do I sync the songs on my ipod that were

  • My iPod 5 won't take pictures

    my ipod 5 hasn't been letting me take pictures for a WHILE now. Probably about 2 months     its on my inner camera because when I bought my iPod it didn't even come with a back camera which I think is freaking stupid. I've tried everything! I'm done

  • Alert log 11g.2

    Hi all , i use oracle 11g.2 Rac with ASM in linux 5 i have 2 nodes when i check the alert logfile i see the below can you tell me what's this mean Fatal NI connect error 12170. VERSION INFORMATION: TNS for Linux: Version 11.2.0.2.0 - Production Oracl