Macbook air mid 2009 very slow
Hello,
I recently bought a Macbook Aid mid 2009 with 2 GB ram, 120GB Sata and 1.86GHZ Core2Duo.
I'm running on OS X 10.9.3 since I bought it.
The laptop is loading very slow many times and I noticed 'kerner_task' taking alot of CPU and RAM.
I'm wondering if my laptop is not good enough for OS X 10.9.3 (this is my first Mac).
Ia there anything I can do?
Thank you
Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook).
Similar Messages
-
Did macbook air mid 2009 running slow with mountain lion?
did macbook air mid 2009 running slow with mountain lion?
Yours is the first computer I've heard about on these forums that is attempting to run Mavericks with only 2GB of RAM.
Indeed that is acceptable per the Mavericks requirements:
http://support.apple.com/kb/HT5842
... but as you may know, Apple has not sold computers with as little as 2GB RAM for quite a while.
I suggest therefore you make sure you remove any applications that may be overtaxing your machine. Examples are browsers other than Safari, Mac cleaning products (such as Mac Keeper), or any other non-Apple app that has some startup process running (such as Outlook). -
How to use old 2005 cinema display (20'') with MacBook Air (mid-2009)
My old 20'' cinema display (2005) has three ports coming out of its power box (single-port dvi, usb, firewire). Is it possible to use this display with my newer MacBook Air (mid-2009) ? If so, what kind of connector do I need? Thank you very much for your help.
To use my old Cinema display (2005) with my old PowerMac G5 (2005) I had to plug in all three ports (DVI, usb and firewire) into the desktop. Can I really use the display just with the DVI output plugged into my MacBook Air mini-Display Port ?
-
Hi everyone! On my MacBook Air Mid 2009 13" hinges are broken, and i don't have warinty on it anymore.!
What should I do?
Thanks!Still take it to an Apple store genius bar so you can get feedback on what it will cost for repair.
You can also see if you can find an Apple Authorized Service Provider and get a price from them, their work is accepted by Apple.
You can check iFixit.com and see if they have the hinge and price so you have another price for comparison. -
IMac Time Capsule OK, Macbook Air Time Capsule Very Slow, both 10.9.5
I am struggling for more than a week trying to find an answer, but failed, hope someone can help me out
It seems after I upgraded to 10.9.5, a message on my Macbook appeared that I believe advised me to do a new full back-up on my Time Capsule. I did, it was slow, few MB after 1 hour or so, so I cancelled it. Whatever I tried, it remains a problem, I am now backing up 180GB to a 2TB Time Capsule, and it is at 53GB after 10 hours, now running at about 1GB/3 hours. My iMac, also on 10.9.5, connected to the very same Time Capsule on the same network runs smoothly, backing up 850GB in 8 hours or so.
What I have done so far, that did not help:
- Reformatted my Time Capsule completely,
- Run Disk Utility on Macbook, Repair Disk permission, Repair Disk.
- After Repair Disk Permissions it completes OK, but when I immediately run it again if finds the same problems, which it says have been corrected, see screenshot
- Disconnected my iMac from the network, sticked the very same network cable in my MacBook, ran Time Machine again, no difference
My set up:
1x Macbook Air, mid 2002, 250GB of which 70GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x iMac, beginning 2009, 1TB of which 150GB free space, 10.9.5, no anti-virus, clean-up apps etc
1x Time Capsule 2TB, running latest firmware 7.6.4
All networked to the same network, no wireless connections
Prior to 10.9.5 I did not have this problem. I am pretty much lost. Anybody?USB to ethernet has never been great.. although why it is worse with 10.9.5 is typical quality of apple upgrades these days.
7GB/hr sure aint fast.. it will go fairly slowly over the small files but should speed up on the larger ones.
I would take another step.. since you have come this far..
Check your wireless link speed. Depending on the age of the TC (yours in gen4) and the air.. you link speed should show 450mbps in the wifi on the mac.
Check it now..
Transmit rate should show 450.. you might need to setup close to the TC to get it.
But I achieve that by setting different names for the two bands.. TC24ghz and TC5ghz.
By default my mac will choose 2.4ghz .. because it is based on the best signal not the best speed. On 2.4ghz it can achieve 217Mbps max. Usually it will drop to 130. So by using a different name I can force the connection to the highest speed.
As you can probably tell.. IMHO using auto for everything is a great way to get things to work.. but how well they work is optimised by a committee.
Setting all the factors myself I set what I want and produce a racehorse instead of a camel.
(It is a typical joke.. camel is a horse designed by a committee!!). -
Macbook pro mid 2012 very slow - hardware?
Hi there,
usually all challenges I have to face with my apple devices are pretty solvable with google but this one brings me to despair. Perhaps somebody can help me out.
The situation:
Since I started to use apple devices I am using a MBP Mid 2009 and besides that it is a little bit slower than in it's first days it works like a clockwork. My girlfriend (also working in the IT industry and knowing how to treat a computer) has the problem that her MBP Mid 2012 was extremely slowing down three weeks ago. It was getting so slow in a few day that every click she does results in a minute of watching the beach volleyball of doom.
Due to the fact that every action on the GUI was enormous fast and every action taken which demands data from the hard drive was causing the beach volleyball, made me think that there has to be an error on the hard drive. (originally intern drive: Toshiba)
It turns out that it wasn't that easy to solve, here is what we did:
First approach was:
Resetting the RAMs
Repairing the access rights of the hard drive and all the stuff you can find on google.
I tried to boot from recovery and format the internal hard drive
here was the problem that we weren't able to format the partition.
also trying to use time machine resulted in an error and wasn't able to finish
Next thing: I installed another hard drive (Western Digital) on the internal sata port which worked fine for about 3 years in my macbook and was, until I formatted it for it's new purpose, working very fine as external drive.
additionaly I build a Yosemite boot stick to reinstall it on the WD HDD.
I wasn't able to reinstall Yosemite using the boot stick and trying to install the OS while the WD drive was attached to the internal sata port.
next I changed the drives back: Toshiba internal, WD fresh formatted by my MBP Mid 2009 external
next I tried to install Yosemite freshly on the WD which was now attached over USB and that worked very well and the MBP Mid 2012 was running like new although that I accessed the HDD over a slow USB port.
The next step was the following: I used the latest time machine backup on the WD drive while it was attached external over USBthat worked very well
After that I did the following: I changed the drives back: WD with time machine backup internal, Toshiba drive attached over USB external.
first I tried to boot from the internal port which had the WD drive attached. That resulted in a gray screen with an crossed circle.
next I tried to boot over the USB port the original unchanged Toshiba drive. That worked great and there was no sign of the beach volley ball.
In my eyes that excluded the fact that the Toshiba hard drive has any hardware damages.
After that I was calling the apple customer service but they had also no clue what the problem could be.
I told them that I suggest an hardware error between the hard drive and the logic board
The only advice they had for me was to deactivated Filevalt on the Toshiba drive
So I deactivated Filevalt and changed back the Toshiba drive on the internal sata drive.
For the very first moment the problem seemed to be solved.
After about 1 hour of usage the behavior was back and the MBP wasn't able to use again.
So my last approach on the problem was the Apple Hardware Test (AHT)I was running the test normal and in extended mode and both times it told me no hardware errors found.
So long story short the questions:
If AHT sais no hardware problem found, could there anyhow a damaged part?
Has anyone any suggestion what I could do to solve this damned problem?
Thanks for reading and thank you very much vor any kind of advice or hint.
Greetings from Germany1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' 's/Pr.+n //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-onlyin / kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' '-app Safari UserStyleSheetEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks I/O errors Stylesheet );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 58 71 59;D13 5 54 72 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 59 35 60;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My macbook air is running very slow
Gday @Lexchellings
Would love to hear your opinion.
Hardware Information:
MacBook Air (13-inch, Mid 2011)
MacBook Air - model: MacBookAir4,2
1 1.7 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
Mac OS X 10.7.5 (11G63) - Uptime: 2 days 2:31:27
Disk Information:
APPLE SSD SM128C disk0 : (121.33 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (33.1 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Apple, Inc. MacBook Air
Configuration files:
/etc/hosts - Count: 16
Kernel Extensions:
at.obdev.nke.LittleSnitch (4052 - SDK 10.8)
Launch Daemons:
[System] at.obdev.littlesnitchd.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.wdc.WDDMservice.plist 3rd-Party support link
[System] com.WesternDigital.WDSmartWareD.plist 3rd-Party support link
Launch Agents:
[System] at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
iTunesHelper
uTorrent
Google Drive
Matrox PowerDesk
Safari
Dropbox
Spotify
AdobeResourceSynchronizer
Google Chrome
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
DivXBrowserPlugin: Version: 2.2 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.1
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
Tab Reloader: Version: 1.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Twitter for Safari: Version: 1.02
Audio Plug-ins:
iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
3rd Party Preference Panes:
3ivx MPEG-4 3rd-Party support link
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Growl 3rd-Party support link
Old Applications:
None
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
3% Finder
3% EtreCheck
2% mds
0% Dropbox
Top Processes by Memory:
143 MB Finder
41 MB WindowServer
31 MB EtreCheck
29 MB Dock
29 MB mds
Virtual Memory Information:
2.18 GB Free RAM
597 MB Active RAM
197 MB Inactive RAM
1.04 GB Wired RAM
53.54 GB Page-ins
29.16 GB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Macbook pro mid 2009 running slow
okay so i have a macbook pro 15 inch from mid 2009. my hard drive recently crashed and i bought a new 750 gb hard drive and installed mountain lion software. got my computer running but now my computer is constantly acting slow and showing the beach ball a lot. i have barely used any memory on the new harddrive and i am wondering if there is anyway i can fix it or if my computer is running slow because it is older and mountain lion is simply to new for it. also i know that i need to replace my battery but i am not sure if that has anything to do with my computer running slow.
in my activity monitor, the high % CPU are going from google Chrome and Google Chrome Renderer both fluctuating between .7 to 3.7 %CPU.
all fluctuate
%User: 1.50 - 3.25
%System: .75 - 1.25
%Idle: 96 - 98
under system memory:
Page Outs:0 bytes
Swap Used:0 bytes
under Disk Activity:
Reads in/sec: 0
Write outs/sec: fluctuate from 0-10
9/19/12 1:13:16.000 PM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
9/19/12 1:13:16.000 PM kernel: MacAuthEvent en1 Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 1:13:16.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 1:13:16.000 PM kernel: AirPort: Link Up on en1
9/19/12 1:13:16.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 1:13:16.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 1:13:16.899 PM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
9/19/12 1:13:17.103 PM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
9/19/12 1:13:17.181 PM com.apple.SecurityServer: Session 100004 created
9/19/12 1:13:17.184 PM loginwindow: Login Window Started Security Agent
9/19/12 1:13:17.289 PM SecurityAgent: Echo enabled
9/19/12 1:13:17.289 PM SecurityAgent: Echo enabled
9/19/12 1:13:17.311 PM airportd: _doAutoJoin: Already associated to “lions den”. Bailing on auto-join.
9/19/12 1:13:17.426 PM configd: network configuration changed.
9/19/12 1:13:17.455 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
9/19/12 1:13:17.455 PM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
9/19/12 1:13:17.456 PM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on lions den because it is protected and not on the exception list
9/19/12 1:13:17.503 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
9/19/12 1:13:17.507 PM configd: network configuration changed.
9/19/12 1:13:17.775 PM WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/19/12 1:13:18.312 PM com.apple.launchd: (com.apple.xprotectupdater[33]) Exited with code: 252
9/19/12 1:13:19.937 PM ntpd: proto: precision = 1.000 usec
9/19/12 1:13:24.948 PM SecurityAgent: User info context values set for frascoje
9/19/12 1:13:24.948 PM SecurityAgent: User info context values set for frascoje
9/19/12 1:13:25.576 PM SecurityAgent: Login Window login proceeding
9/19/12 1:13:25.576 PM SecurityAgent: Login Window login proceeding
9/19/12 1:13:26.068 PM loginwindow: Login Window - Returned from Security Agent
9/19/12 1:13:26.079 PM loginwindow: USER_PROCESS: 45 console
9/19/12 1:13:26.128 PM airportd: _doAutoJoin: Already associated to “lions den”. Bailing on auto-join.
9/19/12 1:13:26.377 PM com.apple.launchctl.Aqua: load: option requires an argument -- D
9/19/12 1:13:26.377 PM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
9/19/12 1:13:26.886 PM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[125]) Exited with code: 1
9/19/12 1:13:27.082 PM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 23815
9/19/12 1:13:30.417 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.420 PM com.apple.dock.extra: 2012-09-19 13:13:30.404 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.422 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.426 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.427 PM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.419 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.425 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.433 PM com.apple.dock.extra: 2012-09-19 13:13:30.426 com.apple.dock.extra[158:1707] Could not connect the action buttonPressed: to target of class NSApplication
9/19/12 1:13:30.980 PM [0x0-0x6006].org.videolan.vlc: [0x10020a430] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
9/19/12 1:13:33.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=166[ksadmin] clearing CS_VALID
9/19/12 1:13:37.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=171[ksadmin] clearing CS_VALID
9/19/12 1:13:41.000 PM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=182[GoogleSoftwareUp] clearing CS_VALID
9/19/12 1:13:42.988 PM com.apple.launchd.peruser.50SharedServices[183]) Exited with code: 1
9/19/12 1:13:46.345 PM com.apple.launchd: (com.apple.coreservices.appleid.authentication[101]) Exit timeout elapsed (20 seconds). Killing
9/19/12 1:14:22.341 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:01.443 PM mdworker32: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
9/19/12 1:15:03.165 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:03.668 PM com.apple.SecurityServer: Session 100007 created
9/19/12 1:15:38.927 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:15:45.848 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:17:26.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:25:51.227 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:27:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:47.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:47.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:27:48.875 PM Google Chrome: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
9/19/12 1:28:14.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:28.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:50.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:28:56.194 PM [0x0-0x7007].com.google.Chrome: [253:-1408855360:960929356231:ERROR:webplugin_delegate_proxy.cc(325)] Couldn't send PluginMsg_CreateInstance
9/19/12 1:28:56.194 PM [0x0-0x7007].com.google.Chrome: [253:-1408855360:960929395137:ERROR:webplugin_impl.cc(269)] Couldn't initialize plug-in
9/19/12 1:29:20.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:36:40.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:40:13.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:40:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:44:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:45:03.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:48:35.218 PM Google Chrome Helper EH: HDDec_Thread_HWSliceDecoder_SampleID: CreateGPUInterface renderer 1040004
9/19/12 1:48:35.221 PM Google Chrome Helper EH: ava error: InitDriver call failed, call DeleteDriver ...
9/19/12 1:48:47.000 PM kernel: Limiting closed port RST response from 352 to 250 packets per second
9/19/12 1:51:46.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:51:53.062 PM VLC: Media key event tap was disabled by timeout
9/19/12 1:51:55.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 1:55:27.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:24:40.000 PM kernel: MacAuthEvent en1 Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 2:24:40.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 2:24:40.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 2:24:40.000 PM kernel: wl0: Roamed or switched channel, reason #8, bssid 00:24:b2:da:9f:36
9/19/12 2:24:40.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 2:40:56.289 PM Mail: Using V2 Layout
9/19/12 2:41:03.488 PM com.apple.mdworker.pool.0: I/O
9/19/12 2:41:03.490 PM com.apple.mdworker.pool.0: error : encoder error
9/19/12 2:41:24.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:42:20.000 PM kernel: MacAuthEvent en1 Auth result for: 00:24:b2:da:9f:36 MAC AUTH succeeded
9/19/12 2:42:20.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
9/19/12 2:42:20.000 PM kernel: wl0: Roamed or switched channel, reason #8, bssid 00:24:b2:da:9f:36
9/19/12 2:42:20.000 PM kernel: en1: BSSID changed to 00:24:b2:da:9f:36
9/19/12 2:42:20.000 PM kernel: AirPort: RSN handshake complete on en1
9/19/12 2:45:26.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:45:52.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:46:15.000 PM kernel: IOSurface: buffer allocation size is zero
9/19/12 2:51:07.198 PM com.apple.mdworker.isolation.0: syntax error, unexpected DICTSTART.
9/19/12 2:51:07.198 PM com.apple.mdworker.isolation.0: failed to parse embedded CMap.
9/19/12 2:51:07.202 PM com.apple.mdworker.isolation.0: syntax error, unexpected DICTSTART.
hopefully that works not exactly sure what i am looking for in the console.
<Edited By Host> -
MacPro 13in Mid 2009 VERY Slow "Kernel_Task" 500+ MB memory
I have loved my MacPro for years, however, after upgrading to Yosemite the performance is horrible. Can anyone help me understand what I can do to improve the performance? Safari takes forever to connect, and I often just get the lovely color wheel.
I have checked my Internet and it is working great on other items. The only issue is this MacPro. Kernel_Task seems to be eating a ton of memory at times when I am having the most issues, but I am not even sure that that is.
Any help would be greatly appreciated.
EtreCheck version: 2.1.8 (121)
Report generated March 30, 2015 at 1:05:56 PM MDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Technical Specifications)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
6 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 389
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:28:9
Disk Information: ℹ️
ST9250315ASG disk0 : (250.06 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.20 GB (69.33 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.0) [Click for support]
[not loaded] com.nike.sportwatch (1.0.0) [Click for support]
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[failed] com.nike.nikeplusconnect.plist [Click for support] [Click for details]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[loaded] de.metaquark.appfresh.plist [Click for support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30214.0 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: Java 8 Update 25 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
25% WindowServer
11% Activity Monitor
5% mds
3% sysmond
2% launchd
Top Processes by Memory: ℹ️
110 MB Microsoft Word
90 MB Safari
84 MB WindowServer
58 MB mds_stores
58 MB com.hp.devicemonitor
Virtual Memory Information: ℹ️
2.94 GB Free RAM
1.95 GB Active RAM
593 MB Inactive RAM
692 MB Wired RAM
1.36 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 30, 2015, 12:37:28 PM Self test - passedNothings wrong with kernel_task using a lot of memory. That's normal.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Macbook Air 2014 is very slow after waking from sleep
Constantly, when using my Macbook Air 2014 without power cord (which I am required to do at College), when my laptop goes to sleep, and I then immediately click to wake it up, it takes at least 20 seconds before the log on screen will come up. The machine has also crashed twice in the past week. Is there a solution for this?
You posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
Cheers, Tom -
MacBook Air 2012 is very slow to start applications
Hello!
I have a MacBook Air 2012 128gb 4gb RAM OS X ML
I welled up deleting the file system that is responsible for the work of php, but it does not matter, then reinstalled with full formatting.
After reinstalling the protesting all the data and some applications have a long run.
When i click the icon jumps well, and so
iPhoto 5-6 times
Mail - 3 times
Notes and reminders to 3 times
before reinstalling to run immediately after you instantly ...
it is observed only in the native programs
such as Photoshop CS6, Things, Coda, Pages start immediately ...
For most applications perform no complaints, all the missiles, but that launch annoying ...
In what could be the problem?
This Console http://cl.ly/MnBsYou posted in the iPad forum instead of the Mac Book Air forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/welcome I'll request that Apple relocate your post.
Cheers, Tom -
My MacBook Air is running very slow...there is an 8sec delay for everything!! help!
Everytime I click on something or am typing there is at least an 8 second delay!! It's aweful....
Everytime I click on something or am typing there is at least an 8 second delay!! It's aweful....
-
FusionDrive in MacBook Air of 2009?
I would like to replace the 1.8'' SSD of my MacBook Air (Mid 2009) with a FussionDrive. Is it possible?
Are there any web or something where I could buy all components?
Thanks.Read http://www.royr.net/2012/11/how-i-installed-2012-fusion-drive-in-my.html
Allan -
Macbook Pro Mid 2009 Processor 2.26 GHz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3. iOS 10.10.1 (14B25). My mac is running slow and have ran EtreCheck. Please help me fix my mac. Thanks!
Problem description:
My mac has been very slow lately. Any suggestions?
EtreCheck version: 2.1.2 (105)
Report generated December 14, 2014 at 8:15:29 PM PST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:52
Disk Information: ℹ️
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
MacHD (disk0s2) / : 159.05 GB (49.15 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Startup Items: ℹ️
DVD3EnablerService: Path: /Library/StartupItems/DVD3EnablerService
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist [Details]
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.icloud.fmfd.plist [Details]
[failed] com.apple.secd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
Problem System Launch Daemons: ℹ️
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.nds.pcshow.plist [Support]
[invalid?] com.nds.pcshow.uninstall.plist [Support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacHD: Disk size: 159.05 GB Disk used: 109.90 GB
Destinations:
KINGSTON [Local]
Total size: 30.88 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 30.88 GB < (Disk used 109.90 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
0% AppleSpell
0% SystemUIServer
0% powerd
0% Google Chrome
Top Processes by Memory: ℹ️
131 MB softwareupdated
112 MB Google Chrome
41 MB Finder
34 MB Google Chrome Helper
32 MB WindowServer
Virtual Memory Information: ℹ️
51 MB Free RAM
587 MB Active RAM
551 MB Inactive RAM
350 MB Wired RAM
10.96 GB Page-ins
865 MB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 07:37:58 PM Install Adobe Flash Player_2014-12-14-193758_[redacted].crash
Dec 14, 2014, 07:21:27 PM Self test - passedPlease describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
Updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently
I updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently. Is there a quick and easy fix? I tried looking online but things seemed very confusing. Any help would be appreciated.
I got a rainbow wheel when attempting to click on a pic in Iphoto. I can copy and paste the next time I have a problem but here is what I have so far.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.139 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:37:23.529 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.579 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.591 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:23.621 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:37:24.078 PM iPhoto[1588]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
9/16/14 2:37:24.866 PM WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
9/16/14 2:37:24.919 PM WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 1.05 seconds (server forcibly re-enabled them after 1.00 seconds)
9/16/14 2:37:51.737 PM Mail[567]: [<_MCLibSasl2SaslClient: 0x600001abf800> mechanism: PLAIN security layer: no] Failed to start the SASL connection
SASL(-1): generic failure:
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.425 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
9/16/14 2:40:43.624 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.629 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.631 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.635 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
9/16/14 2:40:43.969 PM iPhoto[1597]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
9/16/14 2:40:58.283 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
Maybe you are looking for
-
Can't view files on my NAS from MBA
I just recently got my new MBA and at the same time I bought a DNS-320 (NAS). The funny thing is that I can't see the files or the folders on the nas, except the folders in the "root" directory. If I try to browse the content in any of the other (sub
-
New mSata SSD Doesn't Fit Slot in y510p
Hello, I recently purchased a intel 530 240GB ssd for my extra msata slot. Turns out that my new msata ssd won't fit the slot. I'm wondering if Lenovo installed the wrong type of slot on my mobo. Any suggestions will be appreciated. Spoiler (Highligh
-
Hello Experts, I am using the Object Services icon in ME22N and ME23N. When I attach a document, I get the message "document successfully attached". I click SAVE, and get the message "No Data Changed". I go ahead and click the check mark. I now go ou
-
How to use effects to create soft skin tone and glowing look face in video.
Sample video links of late Whitney Houston video, " I will always love you" http://music.yahoo.com/whitney-houston/videos/view/i-will-always-love-you--2153012 http://www.mtv.com/videos/whitney-houston/59560/i-will-always-love-you.jhtml http://www.dai
-
My ipod automatically turns on by itself, can anyone help
My ipod automatically turns itself on and when on and in sleep mode it automatically wakes up every few seconds. also I cannont connect to the app store or anything. Can anyone help??