Macbook Air mid 2014?? Is it real?

I just received MBA yesterday but it says "early 2014". They sent another one, the same case. Early 2014 and without Yosemite installed. Is it the old stock??
Will call them up again tomoz. The mid 2014 with Yosemite released a while ago. Wonder why I keep receiving old stock.

Thanks Carl, how to read it though. Say C02NL6EDC086

Similar Messages

MacBook Air mid-2014 EFI Firmware 2.8 Hanging?

Has anyone had an issue with their Macbook Air (mid-2014 or other) hanging on boot (Apple logo and spinner) after downloading and installing the 2.8 firmware update?
I updated mine through Software Update. It's been sitting on that screen for at least 20 minutes now. I've tried rebooting and it just goes back to that screen.
http://support.apple.com/kb/DL1749?v...S&locale=en_US
Thanks,
Rob

Erasing the partition, reinstalling Mavericks, and restoring from Time Machine seems to have done the trick. At least I wasn't bricked. But I would recommend having a fresh backup before the little notification from System Update (yes, this update came through System Update) pops up. Hopefully my experience is unique.

MacBook Air Mid 2014 but shows Mid 2013

I just received my MacBook Air yesterday, the latest 1.4GHz i5 processor, customized to 8GB ram, and after setting it up and installing/updating everything i need (took me whole night to that), I looked into "About This Mac" and it says there "Mid 2013", everything else in System Report is as per the latest model. I checked the box before I opened, and everything is also as per specification, but I would assume it should say "Mid 2014".
I'm on the phone with Apple Support as I type, earlier was on the online support chat, and they were as baffled how did this happen. They even offered a replacement but I will need to send it back. Now that I am on the phone with them, the only explanation they gave me is that, ALL the new MacBook Air's says "Mid 2013", that indicates hardware date, despite them being "new". And assured me there's no issue with it.
I argued that depreciates the value of the MacBook Air almost immediately, and I felt cheated buying a 2014 model but instead I got 2013 hardware! And since I have been on hold for 20 minutes at least, while they check. A senior advisor came on and explained, that as there were no major changes in the MacBook Air, it is still Mid 2013 model BUT the specifications are 2014.
Based on that explanation, I assume EVERY MacBook Air with the 1.4GHz processor that was released this year, should say Mid 2013. BUT if there is even one that says 2014, I believe every owner would want one. And I stressed to the support personnel that if at any time I find one that says 2014, I will refer back to this case and demand for a replacement.
So if other owners would just post your "About This Mac" and verify this explanation, for the benefit of everyone.

I am having the same exact issue. I thought the reason might be because my customized version which has a 1.7 Ghz Core i7 is the same processor as the mid-2013 models. However in looking at some other posts online people with customized versions that have 8 GB of memory are having the same issue, even if their processor is the 1.4 Ghz Core i5 which is only included in the early 2014 models.
They Early-2014 Models came out on April 29th 2014, and looking at my serial number you can see that my computer was made AFTER that date.
There are however computers that show do Early 2014 such as the MacBook Air in this unboxing video.
https://www.youtube.com/watch?v=hjkrv2-kwCs
What's interesting is the computer in the video was made BEFORE mine (from the serial number) yet it shows as newer in Apple's system
Now I have seen some posts indicating that apple will fix this issue via an update, however it is NOT just a software issue but also an issue in Apple's computer systems
If I look my device up on https://selfsolve.apple.com/agreementWarrantyDynamic.do
It shows as a mid-2013 Model, whereas if I look up the MBA in the YouTube unboxing it shows as an early 2014.
I really hope Apple fixes this, I have spoken with managers at two Apple Retail stores and they offered to exchange my device within the return period, but I have yet to have gotten a chance to head over, I will likely within a day or two.

Macbook Air mid 2014 air-ventilator is very loud

Hi guys,
my Macbook Air's ventilator is running very loudly when I am playing intensive-graphic games. For example when I am playing Tomb Raider. Can my Macbook Air handle it or should I leave the game out ?
Thank you for responding. I appreciate it
Jake

If it doesn't normally run loudly, then it's doing so because of the heat created when playing certain games. It's best to not play those games or, if you must, then don't play for too long in order to reduce the heat produced. The fan will run loudly in order to remove the heat. You could also try using external ventilation and be sure to place the computer on a hard surface and elevate the rear about 1" to allow better air circulation.
I would also suggest installing iStat Menus 4.21 and keeping an eye on temps and fan speed.

MacBook Air mid-2013 OSX 10.9.1 cannot connect to DVI Monitor

Does anyone else have this problem? I've seen similar issues raised, but so far can't find a solution to my particular issue:
MacBook Air Mid 2013 (ordered Jan 2014)
- 1.3GHz Intel Core i5
- 8GB 1600MHz DDR3 RAM
- OSX 10.9.1 Mavericks.
When I connect my MacBook Air to any monitor (well, I've tried three monitors: Benq, NEC and Samsung) the monitor will not detect an attached computer. The MacBook also does not think it's connected to an external display.
If I connect via VGA cable, it works fine most of the time*, so the display port seems to work only for VGA and not DVI.
I am using mini display port adapters (DVI and VGA) purchased from the Apple Store.
The adapter for the mini display to DVI works fine, since I can get my 2009 MacBook unibody to connect to an external display via DVI without issue. So it's not the adapter, or the DVI cable.
I have tried resetting the System Management Controller for my MacBook air but it does not work. No matter how many times I reset the computer (Hard reset, Soft power down, SMC reset) I cannot get it to connect via DVI.
Has anyone experienced this issue, or seen a resolution for it?
*The only other symptom I get periodically, is that after being disconnected from a VGA monitor, the computer will periodically (about 2/5 times) not connect to the VGA monitor either without a reboot. However it will connect most of the time, and ALL of the time after a reboot.
Thank you

Thanks themachead: I have tried the adaptors on different macs, as I indicated in my post. The adaptor works fine with a different mac
Yes, I have also tried starting up with the monitor connected, and disconnected.
I just got off the phone with Apple Care. They couldn't solve my issue through normal means, but during one attempt, we closed my MacBook Air while it was connected to the external display, with my Magic Mouse and Apple Keyboard connected via Bluetooth. The external monitor did not come on. However when I opened my Macbook Air's screen, we saw that my Mac had crashed and prompted me to reboot. When it did, the external monitor worked. I have been able to disconnect and reconnect the monitor and it seems to be working now. I will see what happens after a few attempts.

Hi everybody, my Macbook air mid 2012 MD 231 suddenly shut down then i can not turn it on. I heard a sound like a fuse is blown or something like that. Did any system break or burnt? I did not charge at that moment. Plz help

my Macbook air mid 2012 suddenly turn off after a strange sound (like the sound òf a fuse has blown or something like that) and I also feel a burnt smell too while i am watching a film on the internet and did not charge the laptop at this moment. The sound was from the left of it, and now just a dark screen , even I tried charging it (still has green light at the charge tool). I bought it on 13st April 2013, not often use.
I love apple and i am so sad that a new product which i seldom use could be break so easily and outstanding. It's so late in my country now but i am too disappoint about the trouble so i am writing with hope of supporting from Apple and the community.
Please help , thank bro

You will have to take it to an Apple Store for repair.

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

Look at Target Display Mode:
http://support.apple.com/kb/ph4469
http://support.apple.com/kb/ht3924
Ciao.

Macbook Air Mid 2013 No Built-In Audio

Hey everyone,
I have an issue with my friends Macbook Air (Mid 2013 Model). After listening to some music through his speakers, he unplugged his Aux cable and then plugged them back in to find that he didnt have built in output or input anymore. I have tried all of the following to fix it:
Reinstall OS X 10.8
Run all of the Automation tools found in the application Onyx
Reinstall certain .kext files (AppleHDA and AudioAUUC)
Repair permissions
Re-seat the speakers in the device itself
Reset coreaudio
Resetting SMC, PRAM, and NVRAM
Clear and re-build kernal cache
Cleaned the headphone jack
Plugged in an audio interface
Reloaded from Time Machine Backup
etc...
I've literally tried almost everything in the book. The only other thing i can think of is installing a copy of Mavericks when it comes out (In October i believe). There is no boot up chime, and after running the OS in verbose mode, i can see that AudioAUUC.kext is not being loaded. Built in audio does not appear is system profiler. What can i do to fix this problem? Could it really be a hardware issue? If so, what can i do to fix it?

Test after each step.
1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
    Option click the speaker icon, if present and select Internal Speakers.
2. Plug in the head phone and reset SMC.

MacBook Air (Mid 2013) Windows 8 via Bootcamp

Hey guys,
Just wanted to know if there was anybody who was able to install Windows 8 (or even Windows 7) on their new MacBook Air.
I heard from somebody that installing Windows via bootcamp was different for this model.
First of all,he said that you are unable to install Windows 7/8 with a CD--although it is possible, he said that you will incur with some prolems during installing, he said the trackpad and keyboard will be not functioning.
Anyways, there were many other problems he told me...
Anybody installed it? Were there any problems?

Well you must actually say what you mean. DVD or 8GB flash drive. Whether you have a USB-DVD Apple SuperDrive or something else.
BCA should walk you through. And, it has instructions! a guide to read and printout.
http://www.apple.com/support/bootcamp
FAQ http://support.apple.com/kb/HT5639
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.
Can I use an upgrade from Windows 7 to Windows 8?
Yes. Download and install the Boot Camp 5 Support Software before attemping the upgrade by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3. Alternatively, you can manually download the Boot Camp 5 Windows Support Software here.
When I do an upgrade install from Windows 7 to Windows 8, an "Uninstall USB 3.0 eXtensible Host Controller Driver" message appears. What do I do?
Do not click on Uninstall. Click the back button and Cancel the upgrade. Download the Boot Camp 5 Support Software by using the Boot Camp Assistant in OS X Mountain Lion v10.8.3, or click here to download them. Then, try the upgrade again. See this article for more information.
After upgrading from Windows 7 to Windows 8, Thunderbolt devices are (not) being recognized when I connect in. How do I fix this?
Disable the Windows 8 Fast Boot feature to allow Thunderbolt devices to be recognized. See Boot Camp: Thunderbolt devices not recognized after Windows 8 upgrade for instructions.
Is there an OS X version requirement to use the Boot Camp Assistant to download Boot Camp 5 Support Software?
You need OS X Mountain Lion v10.8.3 or later installed to download the Boot Camp 5 Support Software (Windows drivers) using the Boot Camp Assistant. After upgrading, click the Go menu and choose Utilities. Then, open Boot Camp Assistant and follow the onscreen instructions. You can download the Boot Camp Installation & Setup Guide.
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software. How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.
Model-specific Questions
I receive a "Free up space on Drive C" message when I try to do an upgrade install from Windows 7 to Windows 8 on my MacBook Air (11-inch, Mid 2012). Why am I seeing this?
There is not enough free space available to do an upgrade install with the 64 GB SSD configuration. Delete the Boot Camp partition and do a full install instead. See this article for more information.
I see a black screen or distortion when I install Windows 8 on a MacBook Pro (Retina, 13-inch, Late 2012). How do I fix this?
The Windows 8 installer does not contain the correct graphics driver for your computer. You'll need to attach the USB media that contains the Boot Camp drivers during installation to address this issue. See this article for more information.
The volume controls keys (F1 and F2) won't work on my iMac (Mid 2011). How do I control the volume?
Use the Settings Charm to control screen brightness. See this article.
My MacBook Air (Mid 2012) will not start Windows 8, or displays VGA graphics when it stats up. How can I fix this?
Your MacBook Air (Mid 2012) needs an EFI Firmware update to address this issue. Download and install the MacBook Air EFI Firmware Update 2.6.
I see a "Windows 8 is not supported on this Mac" message on my Mac. Can my Mac run Windows 8?
For a complete list of Mac computers and the Windows operating systems they support, click here.

MacBook Air Mid 2013 BootCamp Windows 8.1 Compability

Dear All, actually I have a doubt on installing Windows 8.1 on MacBook Air Mid 2013 by using BootCamp. the thing is when I bought Windows 8.1 from a typical computer accessories store, I been told by the salesperson that there will be no problems at all after installing it, but after I installed the Windows 8.1 on my friend's MacBook Air, the USB ports and trackpad seems like no functioning at all, and the sadest thing is the Computer cant be turn off!!! Its there any remedies on this problem? Or should I just use Windows 8 or either Windows 7 because seems like there is still dont have any software update from Apple, Guys, I need helps from you guy. Thanks!!!!

Thanks themachead: I have tried the adaptors on different macs, as I indicated in my post. The adaptor works fine with a different mac
Yes, I have also tried starting up with the monitor connected, and disconnected.
I just got off the phone with Apple Care. They couldn't solve my issue through normal means, but during one attempt, we closed my MacBook Air while it was connected to the external display, with my Magic Mouse and Apple Keyboard connected via Bluetooth. The external monitor did not come on. However when I opened my Macbook Air's screen, we saw that my Mac had crashed and prompted me to reboot. When it did, the external monitor worked. I have been able to disconnect and reconnect the monitor and it seems to be working now. I will see what happens after a few attempts.

Macbook Air mid-2013 suddenly not booting - showed battery icon then died

Hi all,
This morning, I used my Macbook Air (mid-2013) to send an email and check up on my usual stuff, nothing I've not done hundreds of times. I then closed the lid and went to work. Again, nothing I've never done before.
When I got home though, I opened the Macbook and it didn't wake up, which I thought was odd. So I pressed the power button. For a few seconds, it showed an icon in the middle of a black screen that was related to the battery - sorry I can't recall exactly what it looked like, its the first time I've seen it, but it showed an empty battery with a small red part of it left - obviously understood as meaning the battery was flat.
I was puzzled at this; it should have been asleep since I'd closed the lid, how could it have run out? I was only gone for about 8 hours as well, I usually get more battery life than that out of it when I'm actually using it, never mind when its sleeping.
But I thought whatever, and plugged it in for a few minutes to charge it up enough to turn on and maybe see why it had done this. The orange light came on the Magsafe end, but after a few minutes, still nothing.
Cue much panicking and looking around at things, and this is what I've discovered/tried:
- The battery appears to be charging, the light eventually went green.
- When I press the power button, the Mac does power on; I can hear the fan inside if I put my ear to it (note that this means its really quiet, its not blowing at full power or anything), and the Mac is getting hot on the left hand side where the power adapter plugs in. It turns on both when plugged in and when its not. So the battery has power and the machine is turning on, it just isn't booting or doing anything. I can turn it off if I hold the power button down for about 3 seconds, the fan stops. But everything else is completely unresponsive. Also, it gets quite hot pretty quick, hotter than it normally does when in use.
- I've reset the SMC, several times. When I do this, the light on the Magsafe goes green for a second, then back to orange, as though I've just plugged it in. I guess this means it is responding to the SMC reset, but it does nothing in terms of getting the thing started. This is the first thing people suggest with this problem, but I've already done it and while it seems to be doing its thing, it doesn't fix the problem.
- I've tried resetting the PRAM/NVRAM. This has no noticeable affect on anything.
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor". I wouldn't have tried this but a whole bunch of people said it worked for them, but it does nothing for me. The fact this step didn't work is why I made a new thread; because the issue with those people seemed to be that their Macs wouldn't wake up from sleep/hibernation and shaking it somehow did that, or they just magically woke up on their own.
And at this stage I seem to have run out of thing to try.
I've made an appointment at the Genius bar but the earliest they could do is Saturday, which is pretty crappy and I'm going travelling in less than 2 weeks, so I really need my Macbook to sort out the details since a lot of info about it is on there exclusively.
Does anyone know any reason why this might have happened?
Why would the battery drain so fast when it was supposed to be sleeping?
Why will it now not boot at all, even though it's powering up in some way? Could it not booting be related to the fact the battery seemed to run completely flat, and this has done something to the software or hardware?
Any suggestions beyond what I've tried already?
If I can't get it working before my Genius appointment, I'll post what happens here just in case any one else has this issue so people will have an idea of what might have happened to them.
Thanks in advance!

olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao.

How do I discharge (calibrate?) my Macbook Air (Mid 2013) without harming the battery?

I just got the latest MacBook Air this week. And after reading the discussion here https://discussions.apple.com/message/22294118#22294118 I chose not to calibrate it the first time since it shouldn`t be necessary with lithium-based batteries.
The thing that still confuses me about the calibration issue with the Macbook Air (Mid 2013) is the text I`ve underlined below from Apples page and where they are talking about lithium-based batteries:
http://www.apple.com/batteries/notebooks.html
"Standard Maintenance
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her notebook on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month. Need a reminder? Add an event to your desktop’s iCal. When your battery no longer holds sufficient charge to meet your needs, you may choose to replace it. If your notebook came with a built-in battery, you should have the battery replaced only by an Apple Authorized Service Provider."
So when Apple is talking about discharging, how should I actually discharge it? If discharging a lithium-based battery completely is harmful for the battery life, then what is the ideal way to do this without harming the battery? How should I discharge my battery when the calender says it`s time?

Calibration is not needed for "built-in" -non-removable- battery.
"Portables with built-in batteries
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider."
MacBook Air
MacBook Air (all models)
http://support.apple.com/kb/HT1490
"If your portable Mac has a built-in battery, you don’t need to calibrate the battery."
http://support.apple.com/kb/PH11078?viewlocale=en_US
Best.

How to use old 2005 cinema display (20'') with MacBook Air (mid-2009)

My old 20'' cinema display (2005) has three ports coming out of its power box (single-port dvi, usb, firewire). Is it possible to use this display with my newer MacBook Air (mid-2009) ? If so, what kind of connector do I need? Thank you very much for your help.

To use my old Cinema display (2005) with my old PowerMac G5 (2005) I had to plug in all three ports (DVI, usb and firewire) into the desktop. Can I really use the display just with the DVI output plugged into my MacBook Air mini-Display Port ?

How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi

I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYING TO ADD THE SELECTED PRINTER: UNABLE TO FIND THE APPROPRIATE SOFTWARE ON YOUR SYSTEM AFTER RUNNING SOFTWARE UPDATE."
Problems:
1) Cannot connect on Network because there is no WPS button on my Airport Extreme and Airport Express.
2) Cannot print, both via USB or wifi network.
When I bought the printer, I specifically selected this because it has Airprint and wireless printing and was one of the few printers in the Apple Online store. However, I have been having a lot of issues getting the printer installed to be used on my Macbook Air.
Please help!!

Thank you John Galt!
After running SOFTWARE UPDATE, I restarted the Macbook. (DO NOT CONNECT THE PRINTER TO THE MACBOOK YET!)
Then I connected the Canon Printer MG3170 to my MacBook Air via the USB cable.
Next, I switched on the printer.
I am able to print and scan (via USB cable) from;
SYSTEM PREFERENCES - PRINT & SCAN - select CANON MG3100 series.
To install applications for printing & scanning, go to http://support-asia.canon-asia.com/contents/ASIA/EN/8201148300.html
However, this solved part of the question above, i.e., printing via USB cable (which is not the whole purpose of using the Airprint Printer) but at least it is a start.
*NOTE: UNINSTALL any prior Canon softwares and drivers specifically installed for this printer first before attempting the steps above as it may interfere with the installation process.

Unexpected reboot or restart Macbook pro Mid 2014

My MacBook Pro Mid 2014 MGXC2HN/A bought on 19th August 2014, is unexpectedly rebooting or restarting from day 1, when I login in to my mac it start rebooting and again it will give the login prompt and after login it will hang for 1 minute with popup message that there was some issue with you mac shutdown it , after that it will work fine, after some minute it will again hang and will automatically reboot and will show kernel message error. and every kernel error message is automatically sent to apple ( I want to know whether apple check this message or not ) its paining me lots. and this happens 20-30 times per day... Kindly help...

Anonymous UUID: E7B9DA14-8D16-DA51-BE83-0F546A50D677
Sun Sep 14 21:46:41 2014
panic(cpu 0 caller 0xffffff801c2dc24e): Kernel trap at 0xffffff801c2c7f4c, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x00007fff7f988018, CR3: 0x0000000120da6011, CR4: 0x00000000001606e0
RAX: 0x00007fff7f988000, RBX: 0xffffff80410cb470, RCX: 0xffffff801c8d1770, RDX: 0x00000000025d7930
RSP: 0xffffff820aac3bb0, RBP: 0xffffff820aac3c10, RSI: 0x00000000025d792f, RDI: 0xffffff8034a1a2e0
R8: 0x0000000000019097, R9: 0x0008000000019097, R10: 0xffffff801c8d2a78, R11: 0x0000000000000052
R12: 0x000000000000043e, R13: 0xffffff804351cd40, R14: 0x0000000000019097, R15: 0x00007fff7f97e000
RFL: 0x0000000000010203, RIP: 0xffffff801c2c7f4c, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fff7f988018, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff820aac3840 : 0xffffff801c222f79
0xffffff820aac38c0 : 0xffffff801c2dc24e
0xffffff820aac3a90 : 0xffffff801c2f3746
0xffffff820aac3ab0 : 0xffffff801c2c7f4c
0xffffff820aac3c10 : 0xffffff801c2c5add
0xffffff820aac3cf0 : 0xffffff801c2c60a7
0xffffff820aac3d50 : 0xffffff801c27e2fa
0xffffff820aac3e60 : 0xffffff801c2825cf
0xffffff820aac3e90 : 0xffffff801c23d9e3
0xffffff820aac3ed0 : 0xffffff801c5cec5e
0xffffff820aac3f40 : 0xffffff801c5ce98c
0xffffff820aac3f50 : 0xffffff801c640a33
0xffffff820aac3fb0 : 0xffffff801c2f3f46
BSD process name corresponding to current thread: mdworker
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000001c000000
Kernel text base: 0xffffff801c200000
System model name: MacBookPro11,3 (Mac-2BD1B31983FE1663)
System uptime in nanoseconds: 106706072491
last loaded kext at 5072910413: com.apple.filesystems.exfat 1.4 (addr 0xffffff7f9dd21000, size 61440)
loaded kexts:
com.apple.filesystems.exfat 1.4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AppleGraphicsDevicePolicy 3.6.22
com.apple.driver.ApplePlatformEnabler 2.0.9d6
com.apple.driver.AGPM 100.14.28
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.GeForce 8.2.6
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleIntelHD5000Graphics 8.2.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.nvidia.NVDAStartup 8.2.6
com.apple.driver.AppleIntelFramebufferAzul 8.2.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleCameraInterface 4.26.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AirPort.Brcm4360 842.21.65
com.apple.driver.AppleUSBXHCI 683.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.nvidia.driver.NVDAGK100Hal 8.2.6
com.apple.nvidia.driver.NVDAResman 8.2.6
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOSurface 91.1
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOAcceleratorFamily2 98.22
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IO80211Family 640.36
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro11,3, BootROM MBP112.0138.B07, 4 processors, Intel Core i7, 2.5 GHz, 16 GB, SMC 2.19f7
Graphics: Intel Iris Pro, Intel Iris Pro, Built-In
Graphics: NVIDIA GeForce GT 750M, NVIDIA GeForce GT 750M, PCIe, 2048 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x134), Broadcom BCM43xx 1.0 (6.30.223.154.65)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Storage Media
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.1

Macbook Air mid 2014?? Is it real?

Similar Messages

Maybe you are looking for