MacBook Air, no access to an external drive or any other computer with one. Just Internet.
I bought a cs 6 design standard but i want to install it on my MacBook Air with no cd drive and I have no access to a computer with a working one so I can't transfer it to a flash drive. Can I just download it from here and if yes, where exactly?
Thanks in advance!
Thanks! It worked eventhough I downloaded he wrong thing (the Web Premium because I couldn't find the standard). It just gives me a trial version of Dreamweaver and Flash which were not included in standard. But my serial worked with everything else.
Again, thanks!
Similar Messages
-
My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.
Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao. -
MacBook Air No Longer Sees Remote External Drive
I have an iMac with a FW800 connected external hard drive. I use it for Time Machine backups. Also use an Airport Extreme for wireless connection. My MacBook Air at one time was able to "see" that external drive via the Airport and I used it to backup the laptop with Time Machine. Now, all of a sudden, the MBA no longer sees the external drive. What has happened? I use the MBA only occasionally, and told Time Machine to backup only when I tell it to. So, LOTS probably has changed since the last backup. But, what change has broken this connection? My iMac sees it just fine and does Time Machine backups just fine. When I want to share the DVD drive of the iMac, that works as it should. I just can't see that dang external drive any longer. Both machines are at 10.5.6
Can you folks give me some places to start looking to get things working again?Does the time machine volume meet the requirements?
-internal drive, not start up disk
-XSAN volume
-USB drive
-fire wire drive
-eSATA drive
-network server via AFP (from machines running Leopard), including machines running file sharing
the volume must be formated as Mac OS Extended or Mac OS Extended (case-sensitive)
You can't use:
-Boot Camp partition
-iPod
-disk image
-AirPort Disk
-iDisk -
Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”. Is there a way to get around this?
Any advice would be greatly appreciated, thanks so much!You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all. It also won't be easy when the time comes to relocate it all to different drives.
You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library. Next read about how to selectively consolidate items to the external drive.
Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
"...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links. If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences. Changing media folder preferences only applies to new files added, not old ones.
Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391 -
When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.
Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install -
i want to reinstall os X yosemite on my macbook Air but i erased the hard drive and i cant get the local recovery option; only internet recovery; is there any way to go back and get local recovery option?
Hi Bockworld1,
I'm afraid you did an error when erasing your hard-drive, this has automatically erased the "local recovery". In order to pass-by this, you must use a former Mac OS X installation DVD (such as Snow Leopard 10.6.3) and then when updated to 10.6.8 you may access the Mac App Store to recover the Yosemite Installer and proceed to a fresh "update" OR creating a Bootable USB Installation drive with DiskMaker in order to alway get a installation copy.
I also suggest you to create a USB Basic Operating System (you must select a local USB device to install Yosemite or whatever OS you want) with only the base operating system to launch your computer in case of Main Operating System issues.
Given the amounts of issues reported by users with 10.10.2, I command you to download 10.10.2 version to get a stable OS working.
Let me know how it is going.
Good Luck. -
TS4055 How do I use my MacBook Air to access the Amazon Web Service?
How do I use my MacBook Air to access AWS (Amazon web Service)? The information provided to me by Apple Care seems to be about allowing outside access to my MacBook.
Sorry, but does this relate to Apple Remote Desktop, Apple's software for managing networked Macs, in some way? If so, how are you using ARD in relation to Amazon's services?
-
MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
OttoThank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto -
Macbook no longer recognizes my lacie external drive
My macbook no longer recognizes my lacie external drive.
Use a data recovery product such as the ones listed here, and then get a replacement drive.
(110354) -
I purchased a CS6 Design Standard disc and my MacBook Air doesn't have a disc drive. How do I download CS6 to my MacBook?
Download the installer from Adobe Download CS6 products
Install then enter your serial number. -
I have purchased a MacBook Air and access my gmail ok. However, I cannot see Contacts at the top in my gmail. Any ideas ?
I am not an expert, but assuming that you have a Windows or Mac folder with music in it and want to move that to a new laptop, I think you have to import it into iTunes. iTunes needs to associate each file with a link, so copying it over will not associate a link.
Delete the files and try importing. -
MacBook Air used to support 2 external displays
My MacBook Air used to support 2 external (ViewSonic) displays before I upgraded to Mountain Lion. Now it will only support one. It will detect the one using The thunderbolt port but not the one using the USB port.
Can anyone suggest a fix... It is half the computer it used to be.Well it used to before I upgraded to Mountain Lion. One wend in the thunderbolt/display port and the other one went in either USB. It ran two 24 inch veiwsonic monitors at work and 2 different ones at home without a single hiccup. Now it only 'sees' the one plugged into the thunderbolt port through the display adapter...
-
I'm trying to move photos from my external drive to my new computer. When I connect the external drive, I'm able to view all the photos in iPhoto, and I'm able to drag photos to a desktop folder and/or directly into iPhoto. But, when I disconnect the external drive, I no longer have access to the photos on my computer. I'm sure there's a step I may be overlooking but I'm using the same process I've used in the past and cannot determine next steps.
Thanks so far.
I'm currently working on a 2012 MacBook Air 13", running OSX 10.8.
Upon opening my external drive, I've dragged the iPhoto Library to my computer's desktop. When I've opened iPhoto and tried to import the library (from external drive and/or from the desktop), I'm unable to do so, i.e., the library is not highlighted (it won't allow me to click on it).
I can open and view the library from my external drive in iPhoto when the external drive is connected to the computer. But, once the external drive is disconnected from the computer, I'm unable to view the library
I've tried all of the aforementioned when the "Copy Imported Item(s) to the iPhoto Library" is checked. -
My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My MacBook Air has a blinking file folder icon on a blank screen with a ? In the middle of the icon. I've tried turning my computer off and on three times with no luck. Any recommendations on how to fix the problem?
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Maybe you are looking for
-
Transfer data from iphone 3g to ipad
how to transfer data, contact list, from iphone 3g to an ipad
-
Partial Deliveries against Sales Order
Dear Team, Query1: How to see the salesorders list for whose more than one delivery happened in the system?. Query2: How to see the list of invoices that were created with reference to sales Order? Regards, Varma
-
Migration assistant, now I have 2 accounts, I only want one.
Hello, I am new here and would like some help. I have a new Macbook pro with Lion 10.7.5. And I just got done transferring everything over from my old Macbook w/ 10.5.8 So now I have 2 admin accounts on my new Mac. But what I want is just one admin.
-
I'm not familiar with the tracing option, and what I am doing it not working based on online tutorials. I placed a jpg or tiff image in CS4. It's a loose line art sketch done in Photoshop with a pen and tablet. (sketch is a greyish hue not black) In
-
The lightroom lens correction information for my Canon 100-400L and 15-85 has disappeared. It was there last week, now its gone. Only changes I have made is I adjusted the micro focusing adjustments to the focal plane in the 7D camera on both of them