MacBook Air not recognizing an LG external DVD burner?

I have used this burner more than once before with this MacBook, yet this time it's choosing not to recognize it. I'm not familiar enough with Macs to know how to check myself if it's being recognized. Although I did go through the Disk Utility and nothing besides the hard drive showed up. Any help or suggestions?

With the DVD drive connected to your Air open Disk Utility. Do you see the drive name, model #, listed in the list on the left like this.
If you do then the "Drive" is being seen by the system.

Similar Messages

Macbook Air not recognizing anything connected via USB?

My MB Air is not recognizing anything that I connect via USB...camera, harmony remote, phone, toys - nothing! Nothing is showing up as being recongnized...anyone else having this problem? I have tried virtually every device...what the heck?

SMC reset and re verify
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If no USB device of any kind can be found contact Apple for appt. for free in shop full diagnostic and likely parts replacement.

MacBook Air not recognizing Canon PowerShot

I just got home from vacation excited to import photos to my MacBook Air (either using Picasa or iPhoto) from my Canon PowerShot SD3500IS.
For the first time, my MacBook doesn't recognize the camera. I tried connecting to my old camera too and nothing. I tried Googling for the issue and nothing made sense.
An help?

Thanks for the suggestion.
Turns out the memory card had too many pictures on it. I cleared some out and everything worked. Sigh.

When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

Thinkpad X230 could not recognize external DVD burner

Hi, I received my Thinkpad X230 two weeks ago and was planning to make backup media. However, X230 could not recognize my external DVD burner. It was not responding no matter which USB port I tried. The DVD burner works fine with my T400 and X201. Just want to know how to get X230 to work with the DVD burner so that I can make factory backup media. Thanks a lot!

Hello,
Your external USB DVD±RW disc drive may require more power than can be provided via one USB port in order to burn DVDs. Did the drive come with a "double-headed" Y-shaped USB cable to connect to two USB ports on the notebook? If so, try plugging both of the large ends into the ThinkPad's USB ports and the small end into the external drive and then see if it is now recognized by the computer.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

New samsung external dvd burner taking forever to rip a dvd on macbook pro. Please help.

Hello...the superdrive in my macbook pro died recently so I purchased an inexpensive Samsung SE-208DB/TSBS external dvd burner (with USB). It has been burning so far now about 14 hours and still on 55%encoding. I have 45 GB available on system and no other programs running at the same time. Not sure if it's something with the burner itself or with my mac. help please and thank you.

No, just a single USB, which, after reading some online comments elsewhere makes me wonder if it was a power-type problem with my mac. I think I'll have to return the drive..
thank you for the help...

You can use the final cut with macbook air 11 x 4GB with external hard drive

I can install and use the final cut X, with macbook air 11", 4GB with an external hard drive, and them transfer to the mac pro

No, not directly. You would need to transfer your data from your iPad to your Mac and then back it up to an external drive.
Pete

MacBook Air not turn on, after hard disk eject, without guarantee

Hello i have two macbook air not turning on,
after ejecting external hard disk, when macbook air is sleeping.
External hardisk ( 2.5 sata) have one ending of USB Type mini-B
and two endings of cable (one for data, other for power), of USB Type A
After next sequence,
-insert one tail of usb cable into macbook air, the second usb cable into 5v adapter (like iPhone usb adapter)
-after some time macbook air going to sleep
-without waking macbook air, pull out the cable what connected into macbook air
MacBook Air will not turning on.
even after this instructions
http://support.apple.com/kb/ts1367
In nearest AppleStore they say that there is a problem with logic part of notebook,
And the minimal price of repair will be cost half price of macbook air.
In other words, they say what they will not searching the problem of this,
they only will replace mother board.
Would you suggest other solutions ?
May be somebody else have this problem ?

OK. I wasn't quite sure. So, the first thing to try is Resetting your Mac's PRAM and NVRAM followed by Intel-based Macs: Resetting the System Management Controller (SMC). If neither can be effected then take it in for service as there has been a serious hardware failure.

MacBook Air used to support 2 external displays

My MacBook Air used to support 2 external (ViewSonic) displays before I upgraded to Mountain Lion. Now it will only support one. It will detect the one using The thunderbolt port but not the one using the USB port.
Can anyone suggest a fix... It is half the computer it used to be.

Well it used to before I upgraded to Mountain Lion. One wend in the thunderbolt/display port and the other one went in either USB. It ran two 24 inch veiwsonic monitors at work and 2 different ones at home without a single hiccup. Now it only 'sees' the one plugged into the thunderbolt port through the display adapter...

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao.

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

Why is my macbook air not picking up my easy cap?

why is my macbook air not picking up my easy cap?

You have to check the EasyCAP website for a solution.
Best.

MacBook Air not recognizing an LG external DVD burner?

Similar Messages

Maybe you are looking for