Macbook air not waking up in sleep mode

my macbook air is not waking up in sleep mode .running mavericks converted from snow leopard had no problems with osx10.6

go to system preferences .. / energy/ ...turn off 'put hard disks to sleep' on both tabs.
should fix it as it has many people
Mavericks induced sleep occurrence, techs. are working on it
https://discussions.apple.com/thread/5495588?start=30&tstart=30
~~peace

Similar Messages

MacBook Air wireless connection problem after sleep mode

Hello guys,
My MacBook Air have problems to connect back to my wireless after comming back from sleep mode. It needs few minutes until it finds again the network.
Does anyone have the same problem or better, a solution to this?

Hello there TheTomcat,
I would recommend the Solution section of our article Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Additional Information
If your symptom is not listed, or the above steps do not resolve the issue, you can search on the Apple Support site or contact AppleCare for further assistance.
All the very best,
Sterling

MacBook Air not wake up after sleep

Hi,
My MacBook Air(Mid 2012) can't wake up after sleep. I recently updated operation system to Mac OS X Mavericks and now after sleep mode screen goes black and nothing happens after this. Only thing that I could do is hard reboot by pressing power button and boot again. Do anyone have the same issue and suggestions how to fix this?
Thanks in advance
Dmitrii

Same thing here. MBA 2011 working perfectly until I updated to Mavericks.
It often doesn't wake up fully. It does draw the password input box but there's no text cursor and no input is possible. The mouse cursor is not visible either. Waiting does nothing (tried ~15 minutes, no change). Closing the lid does not put the laptop back to sleep, it's fully frozen and the only way out is a reboot by holding the power button.

Macbook air doesn't wake from sleep

Since upgrading recently to Snow Lion my late 2010 Macbook Air won't wake from sleep mode. I have a second monitor. After sleeping I hbave to hit the ctrl-alt-power to get it to boot up which is does as a normal cold start. I have power sleep turned off. Ideas?

Later today I disconnnected my 17 inch monitor and put the mAcbook Air to sleep from the Applpe menu. 1st thing, it didn't want to go to sleep. Finally it did. About 3 hiours later I opened the lid or hit space (I forget which) and the screen lit up to where I had left it.
That woukld seem to suggest that somethihng is going on with the monitors preferences, or whatever, as before updating to Mountain Lion I had no sleep problems. What now? Reinstall Mountain Lion or?
TIA, BIll

HP Envy Laptop will not Wake up from Sleep Mode with Windows 10

The reason I decided to go back to windows 8 was because since upgrading to Windows 10, when my computer goes into sleep mode, I cannot wake it up. I have to press and hold the power button to shut it done and restart. Even if I close my laptop, and reopen the lid, it wont start back up and I have to press and hold the power button and shut it down and restart. After trying to restore my HP Envy Laptop from Windows 10 to Windows 8, it got stuck in a Repair PC Loop and I could not even access the desktop, I tried the restore option to an earlier date and that failed and all the repair options also failed. The last option I had was to do a full PC Refresh, and that one worked. It took about an hour but no data was lost, and only a few of my downloaded apps were removed. An html url was left on the desktop that showed a list of all the apps that were removed. So all I did was download those back and now im back up and running Windows 8. I want to re-download Windows 10, does anyone have a fix for this issue?

Hello mistyb1,
Welcome to the HP Forums.
I see that you are having an issue with the printer not waking up from Sleep Mode.
I do have a few suggestions that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once you have the printer connected to the wall outlet, please use the ON/OFF button to do a proper power cycle. This will do a Semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
Thanks

Hello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".  Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G.

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

Macbook not waking up from 'sleep'

Hi there,
I got an really annoying Problem with my 4-Month old Macbook Pro and I hope you guys here can help.
My Macbook Pro does not wake up from sleep, the sleep indicator is solid and not pulsating at all.
The strange thing is, when I initiate Standby the sleep indicator is pulsating, also I can wake my mac up. So my macbook is not waking up if it goes to sleep by its self.
In Addition it is possible to wake my macbook up few seconds after it automatically goes to sleep.
But if is goes to sleep automatically and I don't touch it for few hours I cannot wake it up again.
I already did a PRAM, SMC reset. no change.
Maybe I should mention that my macbook pro is hooked up on an external Display. But not directly connected, there is a kvm switch in between. So I can switch between PC1(PC1Display) & MAC1(PC1Display+MAC1Display) Configurations.
any ideas what the problem could be?
Thanks, TimmyX

I seem to be having the problem as well.
Occasionally when waking it will work. the machine wakes up to a white screen and a little progress bar at the bottom. then the screen comes back.
other times the screen stays black. it seems the computer itself is not sleeping but the screen is black and the Fkeys don't work to either to either change the dim settings on the monitor or keyboard.
I usually have to force shut down the computer to get it back.
I tried the fix I found online about turing off the ethernet port then re activating it after a restart and that seemed to work.
Then I updated to 10.6.2 (using the combo updater NOT software update) and the problem is back.
I now have done the ethernet off and on fix again. I hope it will wor.
I have found a lot opf people with this problem...
I did a clean install of 10.6 and then used migration assistant for my files and prefs... but not my applications since I was migrating from a powerbook g4.
Maybe some pref or setting that was migrated for many of us is causing it...
Are there others with the problem who are on a NEW mac without any migration?
Hope we can help get to the bottom of this.

MacBook Pro Not Waking Up From Closed Clamshell Sleep

Hey everyone,
I've been having problems with my mid 2009 2.53GHz MacBook Pro 15" not waking up from sleep after I open the clamshell (screen) back up. When I open the screen after letting it sit for a while, I can hear the HDD spinning up and the status light on the bottom of the MacBook turns off (like it normally does when the clamshell is opened), but the screen is black and there is absolutely no response in any key combinations or trackpad taps. I've been having this problem for about a month now and its getting pretty annoying. I've tried a total wipe of the disk and a fresh Lion install with a full TimeMachine restore, but I'm having absolutely no luck. The only thing that can bring the MBP back to life is a hard restart. Sometimes when I hard restart it, it comes back to life right where I let off (basically like when the battery loses all its juice and restores everything thats open), but most of the time, it starts up like a normal boot with no restore. I don't know if this is a software or hardware issue, but its really starting to get on my nerves. Let me know if you have a solution! Thanks!
-mxbykr99

Unfortunately, I think the logic board is shot on my MBP, and heres why. My lower RAM Slot only reads my ram some of the time, whereas the top slot never has a problem. If I have to restart my Mac because of the above sleeping issue, it only has 2GB of ram, but if I take the sticks out and swap them, it briefly runs with 4GB until the clamshell gets shut again, and its the same slot thats not reading no matter what configuration of RAM I'm using. Ive swapped RAM sticks with multiple people with no luck. If Just take the bottom stick out, everything is fine, but If its only the bottom stick, it only starts up about half the time. If it dosent boot, I get the "Beeps of Death" at startup. As i said earlier, it's probably not the RAM itself thats causing the problem, somethings screwy in my logic board thats preventing it from reading RAM even though it's in the slot. And yes, I made sure the ram was in it's slot all the way.
-mxbykr99

Compaq C700 - CPU fan not running after waking up from Sleep mode

Hi guys,
Waking up from Sleep mode does not start the CPU fan.
Kernel: 2.6.32-ARCH
KDE : 4.4
Let me know what other details you need.

I was having the same problem after installing mountain lion.
What i did was in Finder went to /Library/Preferences/SystemConfiguration/ and deleted all the networking plists (refer screen shot). Then restarted the Mac and in Network Preferences reconnected to my WLAN.
That solved the problem.

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

MacBook Air not turn on, after hard disk eject, without guarantee

Hello i have two macbook air not turning on,
after ejecting external hard disk, when macbook air is sleeping.
External hardisk ( 2.5 sata) have one ending of USB Type mini-B
and two endings of cable (one for data, other for power), of USB Type A
After next sequence,
-insert one tail of usb cable into macbook air, the second usb cable into 5v adapter (like iPhone usb adapter)
-after some time macbook air going to sleep
-without waking macbook air, pull out the cable what connected into macbook air
MacBook Air will not turning on.
even after this instructions
http://support.apple.com/kb/ts1367
In nearest AppleStore they say that there is a problem with logic part of notebook,
And the minimal price of repair will be cost half price of macbook air.
In other words, they say what they will not searching the problem of this,
they only will replace mother board.
Would you suggest other solutions ?
May be somebody else have this problem ?

OK. I wasn't quite sure. So, the first thing to try is Resetting your Mac's PRAM and NVRAM followed by Intel-based Macs: Resetting the System Management Controller (SMC). If neither can be effected then take it in for service as there has been a serious hardware failure.

W520 CRASHES SSDs WHEN WAKING UP FROM SLEEP MODE

I bought a W520 about a year ago and have gone through 2 SSDs (new Crucial M4 256GB drives), each of which died when the machine was coming out of sleep mode. I had problems with the W520 not coming out of sleep mode properly since I receive it, but since it was intermittent, I didn't send it in. After this second drive crashed (when the W520 was struggling to come out of sleep mode), I shipped it to the depot and they replaced the motherboard. It might be an isolated incident, but wanted to pass it along in case others are experiencing a similar problem.

SSDee wrote:
@Thor - I too like Acronis although one could use Windows Backup if so desired.
Sleep mode - I use sleep mode for scheduled recording of TV shows in Windows Media Center. If I shut down, no recording.
Yea, waking up to do a recording is certainly a valid scenario. I gave up on Windows Media Center right before they came out with an XBOX that is actually quiet and could be used as an extender. We've been a TiVo family since those noisy XBOX days.
Regarding sleep/hibernate, I just got tired of my machines waking in the Lenovo dock and having to reset application position, screen resolutions, and all of the other crap that seems to happen to ThinkPads on a resume. That doesn't even take into account the black screen of death or other reliability issues I've seen over the years.
I am firmly a shutdown guy now. It's clean and I know what I get when I press the power button again. With 15-25 second boots and fast I/O, the reliability outweighs the perceived time savings.
We haven't discussed what might be corrupting the original posters file system. That is disconcerting. Sounds like a Crucial M4 firmware issue. If that is the culprit, there's going to be hell to pay on the mSATA M4 based Ultrabooks assuming it has the same bug.

Macbook pro runs really slow after sleep mode

My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regards

Hi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 172
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Hotspot Shield
    [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
        /System/Library/Extensions
    [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
    [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
    [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.epson.eventmanager.agent.plist [Click for support]
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
    [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Documenten    Map (/Users/[redacted]/Documents)
    uTorrent    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Save to Pocket
    Awesome Screenshot
    URL Advisor
    Virtual Keyboard
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Squeezebox [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
    Destinations:
        My Passport [Local]
        Total size: 999.83 GB
        Total number of backups: 17
        Oldest backup: 2013-11-06 17:55:38 +0000
        Last backup: 2014-10-14 11:30:39 +0000
        Size of backup disk: Adequate
            Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
        15%    mds
         5%    WindowServer
         0%    ocspd
         0%    fontd
         0%    kav
Top Processes by Memory: ℹ️
    223 MB    kav
    198 MB    Safari
    155 MB    Mail
    137 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    3.45 GB    Free RAM
    3.05 GB    Active RAM
    1.11 GB    Inactive RAM
    974 MB    Wired RAM
    1.64 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
    Feb 4, 2015, 07:18:08 PM    Self test - passed
Hope this will shed some light on the problem.

Firefox 14.0.1 tabs not responding after active sleep mode in the new OS X Mountain Lion.

Further to installing OS X 10.8 Mountain Lion, the tabs on Firefox become unresponsive if I try clicking on them further to my Macbook Pro going into energy saving (sleep) mode.

Search these forums. There are hundreds of posts for the same thing. There was apparently a bad batch of 330M cards that Apple used.
Also, you have no third-party extensions interfering. Therefore, it is more than likely a hardware problem and not a software problem.
And, this is a nice little clue:
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f88941 000->0xffffff7f88c43fff
And, we just picked up my daughter's Mid 2010 15" MacBook Pro from the shop after having the same servicing done.

Macbook air not waking up in sleep mode

Similar Messages

Maybe you are looking for