MacBook Air, OSX 10.8.4 won't communicate with AirPort Express.

What is required to use older AirPort Express with 10.8.4?

A workaround is required to install an older version of AirPort Utility 5.6 on your MacBook Air.
This is not officially supported by Apple, so there are no guarantees here.
It would be better if you had another Mac running the Leopard or Snow Leopard operating system to administer the old Express
See this thread for workaround details:
https://discussions.apple.com/message/22940547#22940547
If the installation of AirPort Utility 5.6 is successful, you will need to use that version to administer the old AirPort Express.

Similar Messages

HP DeskJet F380 won't work with Airport Express

Hello,
I just purchased a HP DeskJet F380 AIO printer to use with my PBook G4 12". It works fine when connected directly to the PBook through USB, but when I try to use it with Airport Express it won't work. The printer setup utility recognizes the printer as a Bonjour printer but then the specific model won't show up in the pull-down menu. I've tried picking other HP printer models, but when I try to print the printer won't do anything at all. I asked HP support and they basically threw up their hands and gave no assistance.
How can I make this printer work with Airport?
Thanks!
PowerBook G4 12" Mac OS X (10.4.7)

Hi and welcome to the Discussions
Try the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://www.ifelix.co.uk/tech/1300.html
If the supplied HP driver won't work (and as there are no third party alternatives available) then no it won't work with Airport.
iFelix

MacBook Air 11-inch, Mid 2013 won't boot with external USB keyboard

Hello,
Just bought a MacBook Air 11-inch, Mid 2013 (8GB, i7, 512GB SSD) today.
All available software updates are installed (OS X 10.8.4 (12E3067)).
Also have a Macbook Pro Retina.
If I connect a external USB keyboard (Kinesis Advantage Pro USB) to the Air then it don't boots.
If the keyboard is connected directly to the Air USB port then it don't shows the Apple logo on grey background after power on, just give a endless loop of the turning on sound.
If the keyboard is connected to the Thunderbolt display then same empthy grey screen after power on and no sound at all.
The same keyboard and Thunderbolt display work well with my Macbook Pro Retina and a Macbook Air 2011.
Any ideas ?
Thanks,
Karsten

I like it very much. I use it on my iPad (and occasionally my iPhone). I'm kind of a keyboard snob actually. I tried the Apple wireless keyboard first. Apple keyboards have a short throw that hurts the tips of my fingers. They're very pretty but the on button turns on when I don't want it to and my iPad wakes up in my bag. Strike 1.
I went to a little keyboard called the Joy and it had a positive switch so I didn't have the wakeup problem. It worked well though after several months I wore it out and had to replace it with another one. I also didn't like how flat it sat and used rubber bumpers on the back. It too had a short throw that hurt my finger tips after a while but it was better than the Apple.
Then I discovered the Logitech bluetooth keyboard, the K811. This is a great keyboard. It switches between multiple targets with one press, it has a positive on/off switch, the keys light up, it's rechargeable and lasts a long time, and the slight cushioning on the keys keeps my fingers from hurting. I put the rubber bumpers on it though like the Joy because I like the keyboard to sit up a little. It's a tiny bit bigger than the other keyboards but I like it a lot, better than my MBA keyboard and better than my iMac wired keyboard. I'm trying out an after market keyboard on the iMac now but I'm thinking about switching to one of these for the iMac.

HP Deskjet F2280 won't work with Airport Express

Hello.
When I try to add the printer, plugged into the Airport, in the settings, it says "because of a network error it could not get the software." One time it seemed to have worked, but then I could not print. So I deleted the printer again, and now I cannot install the software again.
I cannot print anything on my iPad through airprint, because there are no printers found... What can I do?

I thought I could plug in any printer there and print over the air to the airport express's usb printer...
Not all printers are compatible with the USB port on the AirPort Express....and....AirPrint is a completely separate matter. This is a separate Apple feature that allows an iPad or iPhone to print to an AirPrint compatible printer using wireless.
The printer has to connect to the network using wireless for AirPrint to work....not USB. You might be able to use a separate App like Printopia to allow the iPad to print when the printer is connected to the USB port.
There is a free trial for Printopia, so you will know if it will work before you buy.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
But, first things first. You need to see if you can get printing to work normally first from your Mac....and then try Printopia to see if it will allow the iPad to print.
But the main problem is that it won't download any software... Even when I plug in the printer into my Macbook, it says "searching for software" and then "Cannot download software now, there is a network problem." But I'm clearly connected to the internet so...
Have you tried powering off the MacBook and the AirPort Express?
Have you contacted HP Support to ask them about whether they still support your printer....and whether there any new printer drivers that you could manually download and install?

Iphone won't work with airport express

ok, so i've set up a wireless network on my airport express using my imac which has no trouble connecting to the network, however my iphone won't even detect that a network exists. my iphone has no trouble connecting to two unlocked neighborhood networks as does my imac. I set up my own network to be unlocked and have no security but still no dice, my phone still does not detect it. what am I missing?

Hello zacmobile. Welcome to the Apple Discussions!
Is your AirPort Express Base Station (AX) the older 802.11g or newer 802.11n? If the 802.11n version, which radio mode do you have it configured for? The default for the newer AX is "802.11n (b/g compatible)". The the iPhone should work with this mode, but you have the option to change the AX to operate in one of the non-"n" modes, like "802.11g only."

Airport assistant in 10.8 won't work with airport express

I updated to OS 10.8 from 10.6 and now the airpot utility says that it sees my airport express (about 4 yrs old) but
"This version of AirPort Utility doesn’t support this base station" I tried an earlier version of airport utility but it won't work with system 10.8. Does anyone have a work around?

Your Express is most likely over five years old.
You need AirPort Utility 5.6 to configure an older Express. The problem with that version is that Mountain Lion will refuse to let you install it.
This dilemma is easily solved. You simply need to extract the app from the installer package using a package extractor like Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for your original AirPort Express was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

Airplay won't work with airport express

I can't get Airplay to work with my airport express since moving to Lion. The AE shows up on the network, I can select it from either iTunes or my iPhone at the Airplay tab, but neither will connect to it. Ideas?
Have reset the AE, reinstalled iTunes, etc.

another possibility is that you could be suffering from wireless interference.
perhaps one of your neighbor's wireless networks is interfering with yours. download iStumbler and note the channels other networks in the vicinity are broadcasting on.
change the channel your network is using as far away as possible from those.

Macbook Freezes After Aprox. 20+ Minutes of Use With Airport Express

Good day!
I've updated the version of my OS, and repaired my permissions, but it still continues to freeze.
What should my next step be?
Thanks for any and all help!

I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this.

Itunes 11.2.1 won't airplay with airport express!!

Itunes 11.2.1 on 10.7.5 will not connect and play music through airport express.
Doesn't this render the airport express 'not as described' and therefore not 'fit for purpose'
I do wish apple would remember people who they owe their reputation to and concentrate on making reliable software again and end this relentless fight to make a better smartphone!
I do hope there is a fix for this because I'm ringing trading standards tomorrow!

The same goes for iTunes 11.2.1 on 10.9.3. And it's not the first time, either. In fact, I've lost count of the number of times a software update has broken Airplay. It's immensely frustrating. If past experience is anything to go by, they'll fix it in a few months' time but until then there's nothing we can do about it. Unless someone can tell me I'm wrong?

I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive

I just upgraded my operating system on my MacBook Air and now my laptop won't detect my Toshiba 1T external hard drive, how to solve this problem?

Try some of the troubleshooting steps outlined below:
Troubleshooting an external hard drive
> Unplug the hard drive, wait a few seconds, and then plug it back in
> Restart the computer
> Unplug any other peripherals from the computer
> Plug it into a different USB port
If none of those steps work, see if it is recognized in Disk Utility.
Checking a disk with Disk Utility
To check a disk using Disk Utility, launch the Disk Utility application in any of the following ways:
> Type the first few letters of its name into Spotlight. Select it from the results.
> Go Launchpad > Utilities > Disk Utility
> Go Applications > Utilities > Disk Utility
Once Disk Utility is opened, check to see if your external HD appears on the sidebar. If it doesn't appear at first, try the troubleshooting steps above again while leaving Disk Utility open, each time checking to see if the external HD appears.
Austin

Can't start macbook air osx maveriks

can't start macbook air osx maveriks

What happens when you try to start?
Portables that will not Power on.
http://support.apple.com/kb/TS1365

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs,

MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs, on items used before (3wks ago) it has always worked

Is there a volume icon at the bottom of the video window when you move the mouse pointer over to bottom
of the window?

Don't know how to scan on Macbook Air OSX 10.9.4

I have recently bought a Macbook Air OSX Version 10.9.4 and am trying to scan a document with several pages using the HP Photosmart C309a series. The printer is connected to my Macbook using a USB cable.
I've always been able to scan documents onto my computer using the HP Solution centre but this isn't available on apple software.
The printer is under system preferences>printers and scanners but there are no options or settings to scan documents with several pages into one file.
I have ticked the box 'combine into single document'. once i have scanned the first page, if i click 'scan' to scan the next page, only the 2nd page is saved in documents and not the first page.
I'm not sure how to control saving the document. Any advice please?

Hello coco06x, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into scan options. I would like to help.
I would recommend going to Apple Scan and selecting show details. In the options box on the right, select format, and select PDF. Under PDF, check the box that says 'combine into single document.'
This should allow you to scan without issue.
Please let me know if you have any questions. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

I'm setting up my MacBook Air and it tells me to sign in with my apple ID but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step?

I'm setting up my MacBook Air and it tells me to sign in with my apple ID so that I can set up features like iTunes and iCloud and such but when I try to sign in it says there's a server error. What do I do? Do I try to skip the step? How can I fix this?

The following previous discussion may help, in particular the last post (1/22/2014 by frankjet7): https://discussions.apple.com/message/21295536#21295536

MacBook Air, OSX 10.8.4 won't communicate with AirPort Express.

Similar Messages

Maybe you are looking for