Macbook air, ps cs4  and updates that doesn't apply!

Hello,
I'm working on my new macbook air (last model). I installed Photoshop cs4 and try to install also the updates: 11.0.2 and other components. The software updater downloads all the softwares and complete the procedure. But, when I restart PS (it is the origianl version) there is no sign of the last updates and if I check again for other updates I found the same ones I've just installed ready to be download. I don't understand why this happens and don't find other discussions in the forum.
Any suggestions?
many thanks
Francesco

How do I uninstall Mac Photoshop CS5 when I have installed CS5.1 also? The Adobe Application Manager just shows one version to uninstall which I would guess is the CS5.1 version.
http://drug-abuse-and-addiction.blogspot.com/

Similar Messages

  • My  macbook air got wet and now it doesn't have any sound

    My macbook air just got a little wet but then air was coming out of it and now it works and i can use it but sound doesnt come out of it. Should i bring it in ? Is there anything that Apple can do to bring the sound back ?

    Leave it turned off.  Leave it unplgeed from the wall.
    Take it into Genius Bar for a repair estimate (estimates are free).  Water damage is not covered by warranty, so the repair bill may be small or may be large.  Genius Bar will know far beter than any users in this forum just guessing.
    Good luck.

  • Went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.

    went to install os mavericks and got this message: MacBook Air Flash Storage Firmware Update 1.1 need. tried that and got: This update requires Mac OS X 10.7.5 or 10.8.5 or later, please advise.mac

    OK. Now, you say you got this alert through App Store when trying to download Mavericks or after you downloaded it and were trying to install it? Which is the correct case?
    The error you are getting may sometimes occur when the computer has already been updated, but I don't know why you would be getting this message. I can only suggest that you take it in for service to find out why this is happening.

  • How can I find MacBook Air Flash Storage Firmware update 1.1 to enable me to download and install iOS X Maverick?

    To download and install iOS X Maverick my MacBook Air demands that I should first of all install MacBook Air Flash Storage Firmware Update 1.1 that I cannot find in MacBook Application Store. So what do I do?

    http://support.apple.com/kb/DL1690

  • I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

    I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

    I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

  • HT1338 Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

    Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

    There seems to be a few bugs with iCloud Mail at times, so send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Apple support article, but I don't think it really addresses your problem.
    iCloud - Mail Troubleshooting

  • HT5219 I have a macbook air (mid 2012) and a thunderbolt display. Do I absolutely need to connect the power supply together with the thunderbolt cable ? I found that the screen won't wake up if only the thunderbolt connection is plugged.

    I have a macbook air (mid 2012) and a thunderbolt display (27''). 
    Do I absolutely need to connect the power supply together with the thunderbolt cable ?
    I found that the screen won't wake up if only the thunderbolt connection is plugged. Is this normal ?

    I just got my ATD and late 2011 MBP up and running. I've not tried running without the power adapter from the ATD plugged in, but I just tried and didn't have any problems with the display not waking. You may want to take your query to the ATD forum - https://discussions.apple.com/community/peripherals/thunderbolt_display - perhaps someone there has experienced a similar issue.
    Good luck,
    Clinton

  • I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook  while travelling, it will not be on my Mac mini when I get home :(((

    I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook  while travelling, it will not be on my Mac mini when I get home :(((

    Hey iWeb plubishing problems,
    I would first check to make sure that you meet the system requirements for OS X to support Documents in the Cloud. For that your Mac’s needs to be running at least OS X Lion 10.7.5 or later to make sure that everything syncs. Take a look at the article below for more information. 
    iCloud: Troubleshooting Documents in the Cloud
    http://support.apple.com/en-us/HT203517
    Take care,
    -Norm G. 

  • TS3276 I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    Open System Preferences > Sound > Sound Effects
    Select:  Play user interface sound effects
    And make sure the Mute box is not selected.
    Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
    Make a selection from the:  New messages sound  pop up menu.

  • I have a new MacBook Air 11'inch  and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto seperate

    I have a new MacBook Air 11'inch  and I presume that it should come with the iLife programs. However, when I signed into the appstore with my account I have used with all of my Mac products, it now said I had to purchase each program, like iPhoto, iMovie, ect. seperate. I have already logged in and out of my account and called the "free" part of tech support. How can I reslove this issue?

    Welcome to Apple Support Communities
    If you really have a new MacBook, iPhoto, iMovie and GarageBand come with the Mac for free.
    As you see their price at the Mac App Store, it's clear that there's a problem with your MacBook. Simply return it if you purchased it less than 14 days ago and you will receive a new MacBook

  • Macbook air Wi Fi and sound stops every time it goes to sleep. i have to  restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

    Macbook air Wi Fi and sound stops every time it goes to sleep. i have to  restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

    Test after taking each of the following steps. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
    2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
    3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
    7. Turn off Bluetooth and test.
    8. Reinstall OS X.

  • Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    I can't help you with a direct answer.  For third-party devices you should contact the vendor (Vodafone). 
    If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

  • Can't install os mavericks because don't have macbook air flash storage firmware update 1.1; can't install firmware update because OS is too old (10.7.4)

    Hello, I have a Macbook Air, bought May 2012 or so that came with OS 10.7.4 on it.  Did not try to upgrade OS until recently.  Tried to upgrade to OS Mavericks, however received error message 'Before installing OS X Mavericks this system requires MacBook Air Flash Storage Firmware Update 1.1."  I then downloaded and attempted to install said Firmware Update 1.1, but received another error message, to wit: "This update requires 10.7.5 or 10.8.5 or later"
    Who can help me out the this Catch-22?  I thought about first updating to OS 10.8, but apparently that is no longer available?

    Hi CursedIn,
    If the Firmware update required for Mavericks requires 10.7.5 to install, you may be able to download it directly from the following link:
    OS X Lion Update 10.7.5 (Client Combo)
    Regards,
    - Brenden

  • Can't install MacBook Air Flash Storage Firmware Update 1.1

    My macbook air is mid 2012
    And I just update the mac on Oct 15
    And today I heard about the ssd failure thing.
    I head to appstore and find 0 updates there.
    Then I download the MacBook Air Flash Storage Firmware Update 1.1 here http://support.apple.com/kb/DL1690
    And it says "This computer does not need this update"
    Does this mean my mac is good? Or not?

    dknyxh wrote:
    And it says "This computer does not need this update"
    Does this mean my mac is good? Or not?
    Firmware update tests the computer first to make sure that the SSD is not a faulty one.
    Then update will not be installed and returns the message
    "This computer does not need this update".
    Does this mean my mac is good? Or not?
    Your Mac is good.
    Best.

  • MacBook Air Flash Storage Firmware Update 1.1

    MacBook Air Flash Storage Firmware Update 1.1.
    I have a mid 2012 MacBook air. I just upgraded to Maverick. As part of the upgrade the ssd was checked and I got a message that my ssd was successfully upgraded and that it is fine. After two days a lost most of the data that was inside it.  Some photos songs and OS were not affected. All my document folder was erased and I lost all my work. Can you tell me if I need to go and replace the ssd or is this a normal issue with the upgrade to Mavrick?

    MacBook Air computers sold between June 2012 through June 2013 with 64 or 128 GB SSDs are known to have a high SSD failure rate and Apple is replacing them for free.
    http://www.apple.com/support/macbookair-flashdrive/
    You should maintain current backups.  Given the known failure rate of your SSD that is especially important.
    For more about backups
    Time Machine Basics: http://support.apple.com/kb/ht1427
    Most commonly used backup methods: 
    https://discussions.apple.com/docs/DOC-3045
    Methodology to protect your data.  Backups vs. Archives.  Long-term data protection:
    https://discussions.apple.com/docs/DOC-6031

Maybe you are looking for

  • Separate application and web servers

    Hi, May I know whether WebLogic server 7 and 8.1 can be installed into 2 servers, one as application server, and the other as web server?

  • Help with iTunes database and Time Machine after Lion clean install

    I did a clean install of OS X Lion and think I've given myself problems with my Snow Leopard Time Machine backup and with my iTunes Library database files. My iMac (2007) had become very sluggish so I opted for a clean install.  Before the install of

  • PDEXGroup to set the Page Group ColorSpace

    Hello, I'm currently trying to add an Image into a PDF (that's the only content) but as I read on previous threads I'm trying to get a correct rendering when there is an alpha (channel/mask) in my image. To do so I first create an Image (PDEImageCrea

  • Storing Long text more that 2000 words

    Hi all,         Can any tell me how can we save long text? 1) i need to create a table which stores long text (instead of T-code SO10). Thanks Senthil Bala Message was edited by: senthil bala

  • Init after some deltas

    Hi Experts, i have a senario We running the one info package with selection critarea company code "ABC" (init & deltas), Now we got new queriment that now we have to take another selection critarea company code "XYZ". What are the steps i have to fol