MacBook Air Restore Problem

Hi I wanted to do a clean restore of my MacBook Air 2014, but I am not able to choose the right partition to install, only Restore partition is shown, but of course not available for installation.
I see MacintoshHD disk un Disk Utility, but IMHO there should be also one more partition, but I am not able to create it as all buttons are greyed.
Screenshots from installer and disk utility are attached, thanks.

Can we discuss on facebook or skype as it will be faster? Thanks.

Similar Messages

  • Macbook air a problem , it powers on only sometimes when it wants to, macbook air a problem , it powers on only sometimes when it wants to

    macbook air a problem , it powers on only sometimes when it wants to

    Reset the SMC, then test your MacBook Air again.
    Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset:
    Before Resetting the SMC
    Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
    Press Command + Option + Escape to force quit any application that is not responding.
    Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
    Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
    Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
    Resetting the SMC on portables with a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.

  • My MacBook Air has problems connecting to a saved network when I first open it.

    My MacBook Air has problems connecting to a saved network when I first open it. When it idles, the connection gets lost and even clicking on the network won't connect it. Then I have to turn off wireless and turn it back on for it to connect. My boyfriend's MacBook Pro does not have this same problem and this problem started maybe 2 months ago and nothing about our internet or router has changed, and its only my computer having the problem. Its a 2013 MacBook Air and my softward is: OS X 10.9.1 (13B42). Please help!

    Hello, nheredia05. 
    Thank you for visiting Apple Support Communities. 
    There are a couple steps that I could recommend trying.  Power cycle the router and test to see if the behavior persists.  Next, try an remove this prefered network from your list and then add it back again.  Make sure all firmware updates have been processed on the router side and the settings have been optimized for performance.  If the issue still persists try the steps in the second article.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    Cheers,
    Jason H. 

  • Has your Macbook Air overheating problems been solved?

    Hi All,
    Has there been a solution to the Macbook Air overheating problem for you?
    I'm considering selling my MBA but want to see first if there has been any new updates on this issue.
    I have a Macbook Air with the specifications as follows:
    Model: MacBook Air 1.6GHz Intel Core 2 Duo
    Production year: 2008
    Production week: 15 (April)
    OS X Version 10.5.7
    Have had the computer for about a year now and it has been constantly overheating and becoming more or less unusable when doing so. Have been hoping upgrades to the software would solve this eventually but that does not seem to have happened.
    As I'm writing this room temperature is about 20 degrees celcius. Laptop sits on a table with power cable plugged in. Not running any external screen. There is no video streaming or music playing. Only the Firefox browser and a few more idle apps are active such as Mail and Skype (in the background). Even under these conditions the fan is currently running loud at 6100rpm and the Macbook Air is very hot underneath.
    CPU temperature is currently 54 degrees Celsius. Both cores seem to be active.
    Now, as an experiment I will head over to YouTube to watch a video and open up Microsoft Word in the background, a perfectly normal usage for a computer this new. This is what happens:
    The computer starts to become painfully slow. After for example clicking an item in the browser there is a 1-3 second delay before the click actually becomes effective. It's now so hot underneath that I would not want to keep it in my lap. It is hard to use the mouse pointer properly as it does not update in realtime, I have to assume where it will land based on my movements. When scrolling, the spinning wheel icon becomes active. Everything is now happening in slow motion.
    Video is lagging heavily. I can only see probably 1 out of every 10 frames or less of the video. All applications running are very slow. CPU temperature is now 64 degrees celsius. Fan is at 6200. Computer is now unusable for me. When I scroll a page in the browser it takes about 2-3 seconds before anything happens. Changing tabs takes 5-6 seconds after I click them. I will have to shut it down before re-starting and resuming work. When room temperature is even higher on a hot day needless to say everything gets a lot worse quicker.
    Is this normal for Macbook Air's? If that is the case they are more or less unusable for most types of normal 2009 year usage (video, audio, browsing, office work etc).
    What solutions have you found? Coolbook? Software/Firmware updates? Hardware changes? Please let me know if you have been able to make your MBA not overheat under normal usage.

    Hi Everybody,
    Thanks for your replies to start with.
    I have tried to install Coolbook now and has it running. When using 'throttling' and letting it change CPU speeds (I think..) the problem still remains. When watching a video or other demanding task the temperature goes way up. Running a CPUTest (small or big) gets CPU temperatures of up to 84-85 C. Fan of course at 6200rpm all the time.
    Right now, I have Coolbook set to 800Mhz and 0.9V. Apps running are Firefox, Skype, Mail and iTunes with no audio playing. CPU temperature at 56 c and fan speed (as usual) at 6200rpm. I can use the computer now. It is still lagging and not very fast at all. Sometimes text appear 1-2 seconds after I have written it on the keyboard.
    So Coolbook has made a difference for me, but only when putting the CPU speed down to 800MHz. I wouldn't call reducing the CPU speed to half a 'solution' though and will not keep that as a long term solution. Reducing voltages for higher CPU-speeds 0.9875V for 1600MHz does not work, it still heats up massively.
    Have used the MBA for the whole day today and can't recall a single time the fan has not been around 6200rpm except right after boot.
    Thanks for the tips on upgrading to 10.5.8. I will try that right away and let you know how it works out.
    Have also considered buying some cooling device but just as you say that feels like a bit of a last thing to resort to.
    I'm surprised Apple hasn't responded stronger to this. Had this happened in the car industry we would have seen thousands of cars being sent back to the garage to be fixed.
    If this only has to do with some specific production weeks then the right thing to do would be for Apple to let those people have their computers either fixed or replaced.

  • SL Macbook Air install problem

    Trying to install SL on MacBook Air. Error message says can't install on this computer because it's not an Intel-based Mac. Obviously, as a MBA, it is Intel based. Any ideas?? Frustrating. First MAC problem I've ever had installing something for the MAC. I feel like I'm back with Windows.

    Check your RAM(should be 1GB)
    repair your HD using disk utility from your restore disc
    repair permission as well
    make sure you have GUID parition(although I am assuming that its already a GUID)

  • Macbook air restored from time capsule backup cannot find ms office product key

    Had a moisture problem on my Macbook Air.  Had to replace with newer pc as could not wait a week for repair.  Had been using Time Machine and a Time Capsule hard drive to back up and the final backup was about 5 minutes before the spill.
    So, I was able to fully restore the new laptop from Time capsule.  Only problem is that I had purchased MS Office and while the programs are restored, when I launch MS Word, it wants the product code.  I cannot find my cd and packaging with the product code from my original purchase.  Any way to get the code off the Time capsule backup?  It must be stored there somewhere but I wonder if it was encrypted and somehow linked to a physical something on the damaged MBAir.
    I'm hoping to not have to buy MS Office again.
    Thanks for any advice.
    JC

    Here you go:
    http://support.microsoft.com/kb/2279109

  • MacBook Air and problems with Time Capsule in 5GHz Radio Mode

    We have our Time Capsule configured to 802.11n only (5 GHz). We've done this to work more efficiently in a particularly noisy wireless area. The problem is that the MacBook Air can't maintain a connection to it and when it loses the connection, the wireless interface seems to disappear from the Mac altogether - the wireless status indicator just shows an empty cone. The only solution is a restart. Sometimes it loses the connection after a couple of hours, sometimes within minutes, though it always goes eventually. All other machines on the network are fine, and switching the Time Capsule to 802.11n only (2.4 GHz) solves the problem, though there's a lot of noise at that frequency and our network performance as a whole suffers.
    I know there's similar threads around dealing with the MBA and wireless issues (I've tried all the solutions vaguely related, e.g. deleting and recreating the wireless interface), though none that deal with this specific problem, which I'm convinced is caused by the radio mode of the Time Capsule.
    All software / firmware is the latest:
    MacBook Air 10.5.2 Wireless Card Firmware Veriosn Broadcom BCM43xx 1.0 (4.170.46.5)
    Time Capsule Version 7.3.1
    I was hoping the recent firmware updates would sort this... any one else running a Time Capsule in 5GHz mode with a MacBook Air?

    I'm running my TC in 5ghz mode with my MBA. My original problem was the lack of signal strength coming from my AEBS caused the MBA to have a slow connection. There are a number of pipes in the wall that separates the two rooms where my MBA lives and the AEBS is.
    So, I hard wired the TC to the AEBS and placed the TC in the room where my MBA lives most of the time. Now that the signal strength is really good I'm not having any issues.

  • Any resolution for new macbook air hibernation problem?

    I know this problem has started to surface online where the macbook air goes into sleep but doesn't wake and the only option is to hold the power key to reboot.
    After having read posts, resetting PRAM and SMC, I still am encountering this issue.
    Has anybody found any solution that has worked or is this a machine or software defect?
    Thanks

    I have the exact same problem. Has it been confirmed that this is a software issue and not hardware related?

  • New MacBook Air camera problem

    Got my new macbook air (mid 2012) and camera doesn't show anything:
    Mac recognizes the FaceTime HD Camera (on System Information),
    but when turning on FaceTime / Photobooth / Skype etc.. the loading icon just stay
    on the screen and nothing else come up.
    Already installed all software updates and tried setting up a new user - still same problem.
    I use OS X Mountain Lion 10.8.4 on Macbook air 13.3" Mid 2012.
    What should I do?

    Jacob ..
    Try troubleshooting the built in camera >  How to Troubleshoot iSight
    Since the same thing happens in more than one user account, try Resetting the PRAM first.

  • New Macbook Air - graphics problem

    New mid 2011 Macbook Air with Intel HD300 graphics card
    Seems to be a problem with brushes in photo editing software. Brushes don't render correctly on screen at certain sizes.
    Problems experienced in Aperture, Photoshop and Lightroom.
    No problems at all with this software on my 2009 MBA or MBP runnining Lion10.7.1
    Problem is just on this new Macbook Air
    Any advice or solution much appreciated

    Problem still there is 10.7.2. No work around. It makes using Photoshop on a MB Air very difficult. On the Photoshop.com forum (Adobe), they are blaming Apple the the graphics drivers, and disavowing any resposibility.

  • Iphone 5c and Macbook Air wifi problems

    Just bought an iphone 5c and got the new macbook air in September. Everything has been great with my macbook air until I got my iphone 5c. The problem comes when I have both the phone and laptop together, connected to my home wifi. Only one will connect at a time, on my iphone it wont even recognise my home wifi but as soon as I disconnect my laptop the wifi becomes visable. I know its not a router issue, Ive turned it on and off and it only works for about 5 minutes. Can anyone tell me what the think is going on or how to fix it? Thanks, Eva

    kbevz wrote:
    i have tried to configure my Router, tried many options and nothing... when connected , have internet connection 40 sec ... then no internet at all ...  heeelp ! thanks
    What exactly have you tried? Did you try different security settings? Which ones did you try? Were there any more successful than another? Which one was it on when it worked for a few seconds? Is the router running the latest firmware?

  • Macbook air display problems in vista

    i got a macbook air, and i installed vista on it and it worked fine....2 weeks later i power up vista only to find the screen format is out of wack, it has 2 black lines on the side, the kind of lines when you watch 4:9 on a 16:9 screen, its basically like a square in a rectangle....i tried everything and it has not worked, could it be driver problems, or screen problems (screen is fine on leopard, its just a vista issue)
    any help is greatly appreciated

    One idea, Vista has automatic update by default enabled. It could be that your graphics driver was updated from the time you installed it. What is the graphics driver version?

  • MacBook Air FaceTime Problem:

    Hallo zusammen, ich wollte mein FaceTime auf meinem MacBook Air einrichten und mich mit meinem bestehenden Account anmelden, leider erkennt wohl Apple in diesem zusammenhang meinen Account nicht. Oder muss ich doch einen komplett neuen Account dafür einrichten? Danke für eure Hilfe.

    Es kommt immer die Fehlermeldung:
    Anmeldung fehlgeschlagen überprüfen Sie Ihre Netzwerkverbindung und versuchen Sie es erneut.
    Das Internet funzt aber ohne Probleme.

  • MacBook Air Display problem

    MacBook Air (Rev A Intel graphics) running Snow Leopard. After several hours of (mostly) browsing, background of the display showed distorted images (like false colour images). This was in the menu bar (which was unreadable until you clicked on it, whereupon drop down menus were OK), and a few other areas. Dashboard showed distorted images. So did bring up the task swap selector (the icons were not recognisable). Any foreground application would overwrite distortion with correct image, however the distortion appeared again when window was moved.
    I initially suspected display cable damage by the hinge, but moving the display did not change things. Rebooting Finder made no difference. Alas, I failed to try fast user switching. Problem disappeared upon a reboot (I still have Windows habits - who would have thought!)
    Has anyone else seen a similar fault? I am coming round to suspecting Snow Leopard rather than hardware.

    Hi Eric,
    I have two machines with the Intel GMA X3100 (MacBook Air, Rev A & Santa Rosa MacBook) and both are running like champs under Snow Leopard. I have not noticed any distortion or other "oddities" since upgrading both of these machines within the first week of the OS's release.
    I'd be curious to have you downgrade (make a clone or TM backup of your Snow Leopard build) and see if the issue magically goes away upon downgrading to Leopard. If it does, it'd be worth reaching out to Apple on for an update. You're entitled to 90 days of telephone support with the purchase of a new OS.

  • Macbook Air Restoring files from Trash Can in Time Machine

    I have memory issues with my Macbook Air.  I think casued by the fact iphoto uses so much memory.  Last week I was trying to download some photos but got a message saying my start up drive was nearly full.  Next think i know, the Macbook has somehow dumped about 500 of my old photos in the trash can (I didn't do this).  A few minutes later I look in the trash can and find it's emptied itself. 
    The next morning when I turned on my laptop, about 1 GB of memory had reappeared, and the photos were back in the trash can.  My plan was to restore the photos however I stupidly didn't do it immediately as I was busy.
    Now a weel later, I again got the message that my start up drive was full.  The photos have disappeared from the trash can.  I have reboted the Mac, but they have not reappeared.
    I backup using an external hard drive and Time Machine.  All I want to do is go into the trash can on the back up and restore the photos from there.  I don't want to restore the whole Mac, as I will lose all the work I've done since that last back up, won't I?  I can't search for the specific files on the Time Machine as I don't know what they're called - they were 100s of photos, the names were numbers only and I don't know which photos they were - as it wasn't me who deleted them!
    Please can anyone help me?
    I find these issues so frustrating, and I can't believe my 60 GB laptop is full.  I only use it for photos, browsing the web and a few documents.  My previous Windows netbook was about a quarter the size and never got close to full. 

    Do you know if the hard drive is full, does iPhoto move files to the trash can?
    No, it doesn't.
    Or does it have a setting to clean up duplicate files
    No. There are third-party applications that purport to do it, and if you used one of those, that would explain what happened.
    Is my only option therefore to restore the entire system to an earlier date?
    I don't see why you would need to restore anything other than the iPhoto library, or whatever folder contained the missing files.
    You can't do a partial restoration of the iPhoto library; it's all or nothing. However, if you restore an older library to a new location, you can extract images from it and import them into a newer library.

Maybe you are looking for

  • Oracle Warehouse Builder 10.1.0.4

    Hi All, I am searching for Oracle Warehouse builder 10.1 release which is compatible with Oracle database 10gR2 on solaris x86 server. I have found softwares for solaris sparc but nothing seems available for oracle 10gR2 on solaris x86. OWB 10.1.0.3

  • Service Credit Memo

    Hi All, I have following scenario: Service PO with overall limit and expected value:$10000 Service entry for this PO:$10000 Invoice entry:$10000 Then i am entring credit memo for $5000 and revoking the service entry of $10000. The problem is that aga

  • Displaying key figures in workbook

    Hi, I added three keyfigures and one calculated key figure to the existing query. when opening the workbook which contains this query the added key figures are not displaying in the workbook. any settings should be made? thanks in advance.

  • Can't Connect to WiFi Network After Changing Encryption

    I have an iPod Touch that no longer connects to my wifi network at home. Some background: I have an aipport extreme base station with three XP laptops, an iMac and a printer connected to it wirelessly. I use a WPA Personal password. My wife's iPhone

  • Clear Text Entry Box Placeholder text on click

    Is there a way to make captivate clear default text when somebody clicks on the text entry box?