MacBook air says startup disk is full

What do you do when it says startup disk is full

Freeing Up Space on The Hard Drive
  1. See Lion's Storage Display.
  2. You can remove data from your Home folder except for the /Home/Library/ folder.
  3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
  4. Also see Freeing space on your Mac OS X startup disk.
  5. See Where did my Disk Space go?.
  6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Similar Messages

  • What can I do when my macbook air says startup disk is full

    What can I do and where do I look to offload things when my macbook air says my startup disk is full?
    Thanks

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • My mac air says " startup disk is full".How to solve ???

    My Mac air has a message during starting the computer and says that startup disk if full. In the composition of my hard there are 120 GB used space on other parts, which I have not understand where is these files.

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • What does it mean when my macbook pro says startup disk is full?

    When im on my macbook pro a message keeps poping up that says my startup disk is full.

    First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
    Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
    First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

  • Its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

    its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

    There are some items to the right of these reply boxes,
    of them a few are likely to be of help to some extent...
    Without knowing which OS X version, advice will be not specific
    and to answer three different ways when one of them is correct
    is a waste of time.
    Is your OS X newer than Lion 10.7.5? IF so different rules apply
    to finding out what is free space, where it is, & how to tell if it is.
    For systems older than Lion (Snow Leopard, Leopard, Tiger, Panther)
    the rules are a little different, since there would not be an Other item
    on the hard disk drive which could contain items necessary to the OS
    yet not detailed to the user.
    And Lion 10.7 has a few hidden files that are hard to locate, and one
    of them may have some bearing on the missing space of a HDD.
    The items here, mostly for 10.7:
    https://discussions.apple.com/message/24954432#24954432
    start up disk full, other options:
    https://discussions.apple.com/message/11808734#11808734
    There are Support articles, you could use Help viewer in the
    system, on your computer, to look for results; or use google.
    However, avoid the temptation to use a badware such as cleanmymac,
    mackeeper, and others that are sources of known trouble to the Mac.
    Good luck & happy computing!

  • MacBook Pro says "startup disk full" and that I have 58GB of photos, but folder appears empty

    For the past couple of days, I've been getting the message that I'm unable to save/download something because the startup disk is full. I checked the storage and the main problem appears to be 58.7 GB of photos, even though I've deleted all photos I could find (including iPhoto). I checked all of the folders on Finder, only to find my picture one taking up most of the space, but when I tried to view what was inside it appeared empty, and it wouldn't let me move the folder to trash. Any help on how to delete the contents of the folder?
    Thank you 

    just kidding i figured it out

  • MacBook Air saying hard drive is full when it's really not

    I have just started getting error messages saying that my startup disk is full, saying I have "Zero KB" available, which makes sense being I have been doing a lot of downloading recently and have been learning Java programming (lots of Java and Class files), and the fact that 80GB isn't a lot of storage space these days (and hasn't been for at least the last 5 years), most notebooks these days have at least 200GB hard drives in them (that is one thing, that as much as I love Macs, has always irked me about them, very little storage space)
    I have deleted over 30KB worth of unimportant files to free up some space (one file being 24KB alone), then opened a Finder window only to find out that it still says "Zero KB Available", if I delete 30+KB worth of files, shouldn't there be an equivalent amount of storage space afterwards?  It doesn't make any sense that I would still be getting "Zero KB Available" after I deleted 30+KB worth of data
    I am not sure if it's related, but for quite a while, I have noticed that my MacBook has been making a clicking noise, this has been happening for quite a while, though I have been hearing it less than before, and just recently I am now hearing what sounds like a screech coming from the MacBook (mostly when I put it on standby by closing the screen, right when the sleep mode initiates), though I have ignored it, being until now, I have not noticed any problems with the MacBook, no loss of data, no corruption, etc., and now the only problem I am experiencing is that it's saying my hard drive is 100% full even after deleting some files, though does fail when I try to verify the disk in Disk Utility
    So is there a reasonable explanation for why it's saying my hard drive is full, or is it possible that there could be a potential disk failure?
    Message was edited by: Mikedamirault2
    Reason for edit: Paragraph Spacing

    18tracks, a KB is small, Ill give you that, but the reply you typed alone, if copied to TextEdit and saved in TXT or RTF format should only be several bytes (under a KB), I have Java and Class files with plenty more text in it and they only range from 1KB to 8KBs, way below 30KB, though if I were to save this webpage as an HTML file, then yes, it would probably get close
    Regardless, it doesn't matter how little I delete, even if I only delete one 1KB file, it should still say 1KB free, yes that is barely anything, but at least that means it would be accurate
    My point, was I deleted 30+KBs worth of data (that is a rough estimate, I am not exactly sure how much I deleted) and Finder STILL said that I had "Zero KB" available, I don't know about you, but 30KB sure sounds like a HUGE difference than 0KB
    To me, this means that it doesn't matter if I deleted 1KB, 1MB, or even 1GB worth, Finder would still say that "Zero KB" is available, and the OS will still refuse to save or manipulate files, to me, that's a sign that something much bigger is going on, and with the clicking and screeching going on (which may not necessarily be the hard drive, but you never know), and the fact that my hard drive failed a verification, something tells me my hard drive must not be in good shape, and could possibly be disastrous

  • My computer says startup disk is full but it isn't.  Is there a fix?

    I'm getting a message saying my startup disk is full, and I need to delete files.  However, I'm only using about 15% of my hard drive (macbook is less than a year old).  Any suggestions what might be going on?

    How do you know you're only using 15% of the hard drive? 
    There could be a number of things going on. In the first instance, I'd run Applications/Utilities/Disk Utility and use it to run Verify Disk. 
    Bob

  • Imovie won't let me save my movie as a file, and it says ''startup disk'' is full!

    I made a movie on Imovie and it won't let me download or convert, I don't know what else I can do, and also it says my disk is full, and my macbook is 64 and its impossible, i dont have that much. please help me. I want to save my movie and fix disk because is making my computer slower and doesn't let me save anything because is ''full''. I need to find a way to save the movie complete and as a file and make my computer faster and with it's original memory.
    HELP!.

    I have the same problem and then some. I movie won't share this particular project, but it also won't save any changes made to it or any other project. At least that's what it started doing, now when I go to even try to make any changes it wigs out and things get scrambled in the Project window and it plays video from another project.
    When I create a new project, the Share menu is available, but it won't save changes to that project either. And by that I mean I can put stuff in the project and do whatever, but as soon as I quit and relaunch the application, the project is empty. I did figure out that if I make changes in a new project and immediately share it to the media browser that it will save the changes, but then it messes up my other project even more somehow!
    Tried archive and install, deleting plists, reinstalling iMovie and iLife support stuff (twice), repairing permissions, and changing permissions in the project package. Any other ideas?

  • Error message says startup disk is full but I have 611 GB available on HD?

    Keep getting message that the startup disk is full. Checked and have 611GB available on the HD. Help!

    "...When I look at the get info screen it says 24mb left..."
    What did you do a get info on?

  • Error box says startup disk is full?

    Keep getting message that startup disk is full? What does that mean?

    Hi Yvonne! Hi Tracy!
    Which OS you are on? (Go on Apple-Menu top left and "about this mac"). There has been an issue with with 10.7.1
    Please update to 10.7.2
    To watch the space of your HD I recommend GrandPerspektive
    http://grandperspectiv.sourceforge.net/
    There is an other tool, which I don't know, but others recommend: "WhatSize"
    marek

  • My MacBook air's startup disk is almost full, what do I do?

    A message has been popping up that my startup disk is almost full and that I need to delete files. I've deleted items in my trash but I only have 8.66 GB available. I have gone through a lot of my files and when I go into my Macintosh hd it has those lines for what is taking up the most space and it is other. The blue audio says 3.48 GB the purple movies says 3.65 GB the orange (photos) says 780.5 MB the green (apps) says 4.29 GB and it says zero KB for back ups. So this other thing is taking up the most room how do I delete stuff from the other column.  I would like to update my software but I need to free up space.

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • My MacBook Air isn't turning on something keeps popping up saying "startup disk full" and then a blank white screen.

    When i try to turn on my MacBook Air something pops up saying "startup disk is full" i don't know what that means. And also after that it goes right To a plain white screen. 

    OS X 10. 7 Lion / 10.8 Mountain Lion / 10.9 Mavericks
    Try these tips.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
        http://support.apple.com/kb/PH10677
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836

  • It shows startup disk is full but i use just only 350gb of my hd disk from 500gb.

    my macbook shows its startup disk is full but i use just 350gb of my 500gb hd.

    That pretty clearly shows the drive is full. So first a question: Why do you believe there's an error? How do you know there's only 350 GB in use? Second is to do the following:
    Repair the Hard Drive and Permissions - Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Again, check your drive usage for any changes.

  • HT3680 My 3 year old iMac is freezing and I get a message "startup disk almost full for running applications. delete files..." Where do I find the startup disk and what should I delete?

    My 3 year old Mac is having trouble and freezes up from time to time lately. I get a message saying "startup disk almost full, delete files ..." something about having enough room for applications to function.  I know my startup disk is the Macintosh HD, but what kind of files do I need to delete and how much space do I need to free up?  In my "about this mac" area, it says I have 4.89gb free out of 319.21  So I am confused why I need to do this.

    You're less than 2% free and should always have at least 15% (my SWAG). Best is to get an ext FWHD and move stuff from the startup disk to it and delete it from that. Best things to move are movies, music, and photos, using the apps that manage those things.

Maybe you are looking for