Macbook air want start up. Flashing question

Hey, yesterday i have this Grey screen and i try erase and i erase the macbook and it's a macbook air. And my macbook restarting and Then there come a questioned folder up, and i try every Thing, CMD V, shift, CMD S, alt , and Then command R there's come some internet up i take my internet and i write code and i load, and Then there's come and error up? I use it too fotos and work. I not have a disc and it's too tind too have a disc player? Plss help i pay 13000 for it...

Read this Apple Support document.

Similar Messages

  • Macbook Air won't startup, flashing question mark

    Hello everyone, here's the problem:
    Recently (Sep) I've bought a new macbook air (2012, 128gb SSD). After a few months of using it the following problem happened: while surfing on the web, my macbook hang up (I couldn't press anything or do anything, the system wouldn't respond), so I shut it down forcefully (by holding the power button), after this my computer wouldn't boot at all: a flashing questioning mark appeared on the grey screen. I know what it means (I'm an Intel engineer and know quite a bit on the subject), so I thought the SSD was dead. Brought it to the shop a bought it at (M-video, Russia, Nizhni Novgorod). After 21 day (sic!) they gave it back to me working fine and said that when they opened it - it worked OK, they tested it for 5 days with reboots and it was OK. After 1 month of using it after I got it back (today) it happened again: the OSx hang -> force shutdown -> question mark on startup.
    Could you please tell what can it be? It's obvious that it's no a hardware problem (in this case it wouldn't happen from time to time but be a permanent defect after the first time it occurred). I tried all the recipes found on the internet (command + alt + P + R; R to get recovery mode - disk utility sees only 1 partition on disk0 of 1.8 GB (I guess it's partition with the base system) and won't let me do anything - all options are grayed out; SHIFT won't let me into safe mode - no idea why; etc.). I also don't have a CD or anything with the mac OS, however even Internet recovery won't help - no targets to install it when it comes to it.
    Have tried almost anything and asked almost anyone among my IT-connected friends, but in vain. Thank you in advance for your help! Will appreciate any piece of advice.

    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    If this fails then see: OS X (Lion/Mountain Lion)- About OS X Recovery.

  • How reliable is the 2014 MacBook Air and its PCle Flash storage?

    I'm planning on buying one from my local Best Buy, but I don't know how reliable it really is. I love the idea of having all day battery life, which is a huge plus for me, and the thinnest of it is simply amazing. I did heard that it has some sort of SSD, which I'm assuming it's PCle flash storage, that makes things so much faster. I don't know anything about them, so correct me if I'm wrong. But is the SSDs reliable? just don't want to get something that's going to be a paperweight in a year. I was expecting to keep mine for, let's say, 3 or more years, which is what I usually do with my notebooks.
    Anyway, long story short, is the MacBook Air durable, and worth the investment?

    That's good. So, in other words, the early-2014 MacBook Air model - with PCle flash storage and a Haswell processor - is a good notebook that should last me a very long time (with proper care)? I'm going to college soon, and I was planning on sticking with this notebook for 4-8 year - for college work, and every day (casual) use. I heard MacBook Airs, or any MacBook with a SSD, are extremely reliable, but I don't know if that's true.
    I never bought a MacBook  so please forgive me if my questions are annoying.

  • Macbook air i5 cant watch flash

    hi i have a question i just bought new macbook air i5 i download adobe 10.3 canot watch some flash movie
    but my other macbook 2008 with adobe 10.2.153 is watchable
    so what wrong thank you

    I'm assuming this is a new Macbook Air. Adobe's Flash is no long pre-installed on this computer because typically, Adobe updates flash pretty often and it's likely that it would ship with an out of date version of flash. You will need to visit www.adobe.com/products/flashplayer/ and download it yourself. If you have it installed and it won't watch flash try to update your version.
    Good Luck!
    C/

  • Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

    Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

    Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
    Then, wake the Mac the way you normally wake it.
    Then, find the Console app - it is in your Utilities folder and looks like this
    You can find it by selecting Utilities from the Finder's Go menu.
    Open Console.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
    That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
    Make note of that exact time in hours, minutes, and seconds.
    Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
    All previously displayed log entries will reappear.
    Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
    One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
    Copy and paste those log entries in a reply.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • TS1367 Can any one help me? My MacBook air want come on

    Can anyone help me. My MacBook air want come on

    Hi
    Have you tried option 6 listed in the linked article yet?
    HTH?
    Tony

  • Macbook pro powering on with flashing question mark?

    macbook pro powering on with flashing question mark?

    You're MacBook Pro can't find a bootable device.
    Which version of OS X are you running and which model MacBook Pro do you have?
    Clinton

  • I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

    Hi
    I have started migration système to transfert from hold Macbook pro to New MacBook air
    Application starter successfully for several hours.
    But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
    Any recommendation or suggestion to solve it ?
    Many tanks

    If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If  you're interested here is an article explaining Setup Assistant tips.
    Roger

  • MY macbook Air just started shutting down suddenly

    MY 2011 Macbook Air just started shutting down when I watch Hulu and Skype. What is wrong?
    It turns back on fine then within 15 mins, it'll shut off completely. So far, it only shuts off when I'm using Skype or watching videos...

    After it restarted, did you see a dialog box resembling this one:
    If so, next time it occurs click Report...
    Before you send it to Apple, copy the text of the report. Paste it in a reply. Remove or obscure any personal information, should it appear.

  • MacBook Air want power on

    My MacBook Air want power on I can have it pulled up for hours and never charge fully what are some of the steps I can take to get it to power up it was working I shut it down and it stop powering up HELP PLEASE!!!!!!

    never charge fully
    Problem could be the adapter >  Apple Portables: Troubleshooting MagSafe adapters

  • Macbook air wont start, i need to reinstall my software

    hello,
    after a restart, my macbook air wont start, i see the apple logo and after a folder with a questionmark.. i run all the test's (holding D at startup) and everything is ok.. so i just need to reinstall my software, my problem is that i do not have any dvd , and i'm not sure wich version of os x i had. . is there any link that i can download an iso of my software?
    Best regards..
    JBe
    <Serial Number Edited by Host>

    Yours would appear to be an original 2008 vintage model, which unlike the more recent MBA systems did not have a recovery partition.
    There is no downloadable source of the MacOS reinstall disk that I know of (none that are legal at any rate) but you should be able to get a copy of the DVD from Apple. The user guide for this model (http://manuals.info.apple.com/en_US/MacBook_Air_Users_Guide.pdf if you also do not have that) explains the procedure for MacOS reinstall using the original disk.

  • HT201364 my macbook air states "start-uP disk is full" how do i fix this?

    my macbook air states "start-uP disk is full" how do i fix this?

    Welcome to Apple Support Communities
    You need to remove files. First, if OS X does not get into Desktop and you only see that message, turn off your Mac and hold the Shift key while your Mac is starting up to start up in safe mode.
    There are different things you can do in order to get free space in the MacBook Air hard drive. Have a look at this website > http://thexlab.com/faqs/freeingspace.html
    Apart from that, you can also delete personal files or move them to an external drive

  • The display on my macbook air has started flashing. are there any fixes i should try before sending it to apple?

    The display on my MacBook Air has recently started flashing.  Are there any fixes that I might try before sending it in for repair?

    The display on my MacBook Air has recently started flashing.  Are there any fixes that I might try before sending it in for repair?

  • I have leopard OSX (10.5.8) on a macbook air. want to upgrade to snow leopard (eventually to ML). how? when no disk drive or mac store. thanks

    I have a macbook air running on OS X 10.5.8. I wish to run on the new mountain lion. I realise that i am currently on leopard which means i have to upgrade to snow leopard or lion before i can get mountain lion. However because i am on leopard, i have no mac store and because i have an air, i have no disk drive. how do i upgrade to snow leopard or lion without these?
    Any help would be greatly appriciated. if i've missed something basic im very sorry

    Apple confirmed the removal of the software this afternoon, and said that customers can still purchase a copy from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
    Non-Apple sources for Snow Leopard:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    If you call Apple then you should ask about purchasing the Lion USB Flash Drive installer if you want to skip over buying Snow Leopard.
    Be sure your model can run Mountain Lion:
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)

  • Macbook has the folder with flashing question mark

    Yesterday as I was watching Netflix my Mac froze. I was skipping around an episode and then started opening a folder to do something else while it loaded and then it just froze. I thought maybe I was clicking on too many things at once or whatever and it got screwed up a bit so I closed it for a minute or two. When I opened it back up it had a (light) blue screen that wouldn't go away so I shut it down with the power button. Then when I turned it back it just had a white/gray screen for like a minute before the folder with the flashing question marked appeared.
    I've googled possible solutions but nothing seems to work. It won't boot up in safemode. One answer suggested trying to do comm-opt-P-R (can't remember what that was trying to do) and that didn't work. The screen would just go black and then start up over and over. When I just press the opt-key it takes me straight to Internet recovery. However, none of the options available work. I don't have the TimeMachine thing, I don't have a disk to reload the Lion software, and there's nothing to click on at all in the disk utility. All that's available in that is a disk0 and the Mac OS X Base System and I can't click on First Aid/Erase/Partition/Restore. I've opened up the startup disk and there's nothing that shows up.
    Is there something else I can try at home or should I just go ahead to the apple store? My Mac is under a year old still, but I spilled soda on it back in like October and had to get all the parts replaced so I don't know if that would do anything to the warranty....And if something does have to get replaced will I lose all my stuff? It was bad enough losing four months worth of data, I don't want to lose seven.
    Thanks for any help.

    As long as the parts were replaced by someone authorized to do the repairs, you should still be fine. This error indicates that they computer isn't able to find a disk to boot to.
    The "disk" to reload Lion is that internet recovery (also can be launched from command + r).
    Seeing as how you don't have the startupdisk in Disk Utility, I would recommend getting it into a store to see why that drive isn't detected. It could be something as simple as a loose SATA cable, or as catastrophic as complete hard drive failure. While you're at the store, I'd look into investing in an external drive to start running Time Machine...

Maybe you are looking for

  • In Openscript I am not able to use a Variable in object Path

    Hi, I have an object : "/web:window[@title='Repricing Pattern Details -New']/web:document[@name='rhsContent']/web:form[@id='newRepricingPatternRPAT' or @name='repricePatternsForm']/web:select[(@id='selectRPA1' or @name='repricePattern.absoluteReprice

  • Can't get kobo to recognize Adobe authorization

    I can read the books on my pc but they won't transfer in readable form to my kobo (authorization not recognized)

  • 'BAPI_POSRVAPS_SAVEMULTI3 giving me 'Invalid location type 1010 ' error

    I am using BAPI 'BAPI_POSRVAPS_SAVEMULTI3' to create Create and Change External Procurement Orders. I have given folloiwing i/p: LOGICAL_SYSTEM                  GDECLNT200 ORDER_TYPE                      1 EXT_NUMBER_ASSIGNMENT           X COMMIT_CON

  • What happened to right click print - must have option????

    running win 8.1 latest firefox IN EXPLORER i can right click and print any image. firefox has no print option on right click, even if i view and image there is no print capability not even a right click print. no menu option are avalable. I can print

  • Data Services / SAP / ABAP

    Hi, i would like to use a var for filter, in an ABAP component my var is a string, that i use for filter like this : KNUMV IN ($MYVAR) with myvar = '0001820242','0001820248','0001820250','0001820253','0001820254','0001820257','0001820258','0001820260