MacBook Air wireless connection problem after sleep mode

Hello guys,
My MacBook Air have problems to connect back to my wireless after comming back from sleep mode. It needs few minutes until it finds again the network.
Does anyone have the same problem or better, a solution to this?

Hello there TheTomcat,
I would recommend the Solution section of our article Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Additional Information
If your symptom is not listed, or the above steps do not resolve the issue, you can search on the Apple Support site or contact AppleCare for further assistance.
All the very best,
Sterling

Similar Messages

  • Macbook pro runs really slow after sleep mode

    My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
    Kind regards

    Hi Japib
    Thanks for your reply. Here is my report:
    Problem description:
    macbook pro is really slow after sleep mode
    EtreCheck version: 2.1.8 (121)
    Report generated 4 februari 2015 20:56:34 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 172
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:36:41
    Disk Information: ℹ️
        APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Hotspot Shield
        [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
            /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
        [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
        [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
            /Library/Extensions
        [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
        [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
            /System/Library/Extensions
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
        [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
        [running]    com.epson.eventmanager.agent.plist [Click for support]
        [running]    com.kaspersky.kav.gui.plist [Click for support]
        [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
        [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
        [running]    com.kaspersky.kav.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
        [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Documenten    Map  (/Users/[redacted]/Documents)
        uTorrent    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 60 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        DuckDuckGo
        Save to Pocket
        Awesome Screenshot
        URL Advisor
        Virtual Keyboard
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Squeezebox  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
        Destinations:
            My Passport [Local]
            Total size: 999.83 GB
            Total number of backups: 17
            Oldest backup: 2013-11-06 17:55:38 +0000
            Last backup: 2014-10-14 11:30:39 +0000
            Size of backup disk: Adequate
                Backup size 999.83 GB > (Disk used 206.70 GB X 3)
    Top Processes by CPU: ℹ️
            15%    mds
             5%    WindowServer
             0%    ocspd
             0%    fontd
             0%    kav
    Top Processes by Memory: ℹ️
        223 MB    kav
        198 MB    Safari
        155 MB    Mail
        137 MB    mds_stores
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        3.45 GB    Free RAM
        3.05 GB    Active RAM
        1.11 GB    Inactive RAM
        974 MB    Wired RAM
        1.64 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
        Feb 4, 2015, 07:18:08 PM    Self test - passed
    Hope this will shed some light on the problem.

  • Macbook Pro Wireless Connection Problems

    I bought my 13 inch macbook pro 1 week ago and I've had wireless connection problems from day 2 (I think after the updates).
    Problems include:
    - Safari cannot connect to the internet for 5~10 minutes after I turn it on, whether it be from sleep mode or completely off or restart (the fastest connection I got after turning it on was about 40 seconds)
    - Loading takes ridiculously long and eventually Safari cannot find the server
    - Airport signal (on the top right hand corner) is always full when it is not working
    - Sometimes internet works but it is ridiculously slow
    However, when the wireless connection stabilizes, Airport Signal is 2~3 bars full and internet works SOOO well and I love it so much when it does. But the problem is that it stabilizes like 30 minutes to never after I turn it on and it makes me so mad I want to explode this piece of crap in the microwave.
    So I've called apple support, and they made me try four things:
    1. Reset modem, router, and computer
    2. Delete caches, reset Safari
    3. Putting Airport first on the Service Order and resetting DHCP Lease
    4. Connecting with Ethernet Cable then resetting the computer
    None of these worked, and I'm suspecting that the cause of the problem is the hardware (not the aluminum body that's just bs) because my router and modem are working fine (my other samsung laptop is working perfectly). I don't think the problem lies in my network settings either because I did exactly what the Apple technicians told me to do. So after Appleguy made me try all 4 of those diagnostics, he told me to contact my router company NETGEAR because he thinks nothing is wrong with the mac hardware, so I did. The NETGEAR lady told me if one laptop is working and another isn't, there is nothing wrong with the router. So if nothing is wrong with my hardware, software, router, modem, ISP... Why do I have wireless issues????!?!?!?!?!?!?!?!?!?!
    I'm going to return this <edited by host> or get another one with my warranty

    Same thing here.
    I've got a Macbook Pro 15" bought 6 weeks ago, airport express bought about a year ago. All updated with latest software/firmware, etc. Problems include:
    -Sometimes when i pull down the network list, my network isn't even there, yet i'm still connected to it. My airport is appx 10 feet away in an open area.
    -usually after opening safari or firefox for the first time upon sleep, restart, or just opening the program after i had quit it, it is miserably slow. it takes about 2 minutes for pages like msn.com to load. finally when they do, its faster than you can imagine. that lasts for about a minute. then its slow again.
    -when logged into ichat and i send messages, i would sometimes get a "connection timeout" message. my buddy would end up getting the message about 5 minutes later.
    My iphone and dell laptop work fine. i haven't tried running parallels, but if bootcamp works, so should prlls.
    I've reset the modem about 20 times. i've reset the airport about 20 times. i even re-installed my OS on the mac and nothing has done it.
    Weird thing is that i've had my mac for 6 weeks, and this problem surfaced only 3 days ago.
    Clearly its not an issue of any of our ISP's. Due to the fact that this only started for me 3 dyas ago, i'm hopeful that its only a software problem and not something else. Hopefully apple will a) ADMIT THEY HAVE A PROBLEM HERE and b) FIX IT.

  • MacBook Air not wake up after sleep

    Hi,
    My MacBook Air(Mid 2012) can't wake up after sleep. I recently updated operation system to Mac OS X Mavericks and now after sleep mode screen goes black and nothing happens after this. Only thing that I could do is hard reboot by pressing power button and boot again. Do anyone have the same issue and suggestions how to fix this?
    Thanks in advance
    Dmitrii

    Same thing here. MBA 2011 working perfectly until I updated to Mavericks.
    It often doesn't wake up fully. It does draw the password input box but there's no text cursor and no input is possible. The mouse cursor is not visible either. Waiting does nothing (tried ~15 minutes, no change). Closing the lid does not put the laptop back to sleep, it's fully frozen and the only way out is a reboot by holding the power button.

  • Macbook air hdmi connection problem

    I cannot get my macbook air to connect to my tv via an hdmi cable. I suspected my cable until my neighbor had the same issue. Have others experienced this and is there a solution?

    I have had this same problem. Has the wifi worked before? What I did was I turned my wifi off, then I restarted my computer, then I turned my wifi back on. If that doesnt work, leave the wifi off, and shut it down for a while. Hope I could help!

  • Problems after sleep mode with wifi connection

    I got my first iMac the other week but i keep having problems after it has gone into Sleep Mode.
    Once i log back in to use my iMac again i can't seem to go online  =and have lost connectivity with emails etc.  Its showing that i'm still connected to my wifi and the only way to fix it is to restart.
    I have already connect chat support about this and the made me reset my PRAM and reset the systems management controller (SMC)
    Does anyone have any ideas??

    Personally I don't let the computer sleep, I set the display to sleep. This has the same net effect and in the 8+ years I have been using OS X I have never had a problem. Set the Computer's sleep setting to Never and set the display sleep to the amount of time you had the computer sleep set at. 
    However if you want to try with computer sleep instead of display sleep check if the wake for network access box is checked. If it already is they your issue is likely somewhere else.

  • MacBook problems after sleep mode

    I am constantly getting the beach ball after my laptop comes out of sleep mode. It doesn't happen immediately, usually 5-10 minutes after I open it and begin using it all applications will freeze. I can force quit them, but I cannot re-open the application, or anything else on the computer. I am forced to shut down using the power button because I cannot even shut down normally. This happened shortly after I downloaded Lion OS.. Is there a way to fix this or am I screwed?

    Hi Z,
    Did you create a backup right before installing Lion?
    If so, I'd go back to it.
    If not, I'd reinstall Lion.

  • Macbook air wifi keeps dropping after sleep

    This is driving me crazy. I have tried so many fixes but nothing has worked. Every time I hibernate / sleep my 2012 macbook air, the wifi drops and takes at least 20 minutes to come back on when I open the laptop again.
    I can reboot, turn the wifi off and on, change preferences...everything. Nothing works. From reading around I am assuming this is a Maverick problem since lots of people seem to be complaining about the same thing, but has anyone found something to remedy it?
    Thanks x

    Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
    Remember networks this computer has joined
    is checked.
    2. Follow the instructions in this support article under the heading
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    3. Reset the PRAM.
    4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
    6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
    7. Repair permissions on the startup volume.
    8. Turn off Bluetooth and test.
    9. Reset the System Management Controller.
    10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
    Select the Power Adapter tab and uncheck the boxes marked
    Wake for Wi-Fi network access
    and
    Enable Power Nap...
    if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
    Enable Power Nap...
    11. Reinstall OS X.

  • Wireless Connection lost after sleep: iMac 27-inch

    When my iMac goes into sleep mode, or logs off after pre-determined time, it loses the wireless connection to the router. I then have to go to the upper right of the screen, select my router from the list of available routers, and force a connection.
    Has anybody else experienced the inability to maintain persistent wireless connections?
    Thanks!

    I had the same problem for weeks with my new 27" iMac.  I tried resetting p-ram, adjusting network settings, throwing out preferences for network settings - - - everything!  Nothing worked.  I final called Apple support and they told me to unplug EVERYTHING from the Mac, including power, wait 30 seconds, and reboot.
    Works fine now.
    Hope that helps!

  • Wireless connection loss after sleep

    Hello,
    I seem to lose my wireless connections upon awakening from sleep mode. Whereas in the past after waking up it would stay connected. Any help is much appreciated.

    James, welcome to the discussions!
    Check the following settings:
    System Preferences > Network. Click on the gear shaped icon below the connection list on the left and select Set Service Order. Make sure your AirPort connection is at the top of the list. If ethernet is at the top, your Mac will look for ethernet connections first before looking for a wireless connection.
    Return to the Network page and click the Airport connection to highlight it. Then click Advanced at the lower right of the pane. Make sure your wireless network is at the top of the list of networks. If it's not, you can drag it to the top so it's first in line to connect. Delete any old networks you do not need by clicking the - (minus) button.
    Make sure there is a check mark next to "remember any networks this computer has joined". There should not be a check mark on the next two settings.

  • Mail connection problems after sleep

    Hi, since upgrading to new retina macbook pro my mail works although not well, most times it will not connect after sleeping, I need to close mail, sometime it will not close and requires a force close, and sometime not all acounts come back on line and I may need to shut down a second time to achieve this.
    I do run 5 different email accounts, POP, IMAP and exchange and have a large amount of mail.
    Hope someone can help, thank you..

    Hello,
    I share the same problems as you do with my MacBook Pro Late 2011.
    For me this has happened only since I have upgraded to Mac OS X 10.8
    I must say it has got a little better and does now go online fine after coming out of sleep once I applied the 10.8.2 update the other day.
    I wonder if this is a bug relating to the different account types. I have a few email accounts running and like you these are, POP, IMAP and MS Exchange. Maybe if it had one account it's fine and that is the reason why not many people have complained about it?

  • Macbook air not waking up in sleep mode

    my macbook air is not waking up in sleep mode .running mavericks   converted from snow leopard had no problems with osx10.6

    go to system preferences ..  / energy/ ...turn off 'put hard disks to sleep' on both tabs.
    should fix it as it has many people
    Mavericks induced sleep occurrence, techs. are working on it
    https://discussions.apple.com/thread/5495588?start=30&tstart=30
    ~~peace

  • Start up problems after sleep mode

    Hi,
    Half of the time when I put my mid 2010 MacBook Pro in sleep mode by closing the screen it won't restart once I open the screen back again (the screen remains black). This hasn't happened that many times before, but now its becoming more frequent. The only way I can restart my Mac is by holding the on/off button for a few seconds.
    Does anyone had similar problems or knows who I could resolve this issue?
    I would appreciate any help on the matter
    I run:
    OS X version 10.9.5
    2.4 GHz Intel Core 2 Duo
    4 GB 1067 MHz DDR3
    mid 2010 MacBook Pro 13-inch

    Step 1
    Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
    Step 2
    If you're running OS X 10.8.5 or earlier, from the menu bar select
               ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
              Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
               ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
    Step 3
    In the Energy Saver pane of System Preferences, uncheck the box marked
              Put hard disks to sleep when possible
    Step 4
    This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    Step 5
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
    In the search box in the window's toolbar, enter "powerd" (without the quotes.)
    You may see one or more lines like this:
    com.apple.message.signature: Platform Failure
    If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Macbook air wifi connection problem?

    Hello Apple Communities
    So i recently pre-ordered a custom built 13inch macbook air, and i am just wondering
    if theres still any issues with the wifi connection. I living in Australia by the way.
    Thanks!

    I don't know that 802.11 ac is the clear answer - but - if you have broadband access that is likely to support ac (not all is/can) in my opinion it would be wise to look to the future and buy an ac supporting router. Certainly those with older routers have more problems, and updating firmware (when possible) seem to cure some.
    Some claim dissabling Bluetooth was their unhappy solution.
    Certainly part of the "fix" for some appears to be to use 5Ghz and g/n settings as opposed to 2Ghz and a/b.
    For others new hardware (returning/exchanging the device) was a solution.
    There are moderators (who will quickly correct - or remove) this reply if I've made any false or misleading statements.

  • MacBook Air Display connection problem

    Hi,I recently got a MacBook Air (late 2010) used 9my dad gave it to me ).
    When I shut the computer's display it sometimes doesn't illuminate when I wake it I tried entering the password even though I can't see.
    And then i can vaguely make out my desktop or the apps.I recently discovered that by moving the whole computer it would illuminarte again i'm thinking that there is a loose connection between the screen and the motherboard.
    I'M RUNNING OSX 10.7.2 AND EVERYTHING IS UP TO DATE I'M VERY PICKY ABOUT THAT IF MORE INFO IS NEEDED JUST ASK.
    I would appreciate any response,
    -Georges
    P.S: I'm a hacker so i will understand any thechnical stuff, and i'm 12.

    I have had this same problem. Has the wifi worked before? What I did was I turned my wifi off, then I restarted my computer, then I turned my wifi back on. If that doesnt work, leave the wifi off, and shut it down for a while. Hope I could help!

Maybe you are looking for

  • When exported to pdf, I lost random text and pictures

    Hi, This is the first time I've used InDesign, and I have experienced a pretty big problem the night before I'm to send it to print. I'm using CS5 and when I went to export it, I chose some simple options I read Standard - PDF/X-4:2008 Compatibility

  • How is super class's method called?

    I'm having some doubt about Item 15 in Effective Java, "Design and document for inheritance or else prohibit it". The author says if a class is intended to be inherited, then its constructor must not invoke any overridable methods. He gives the follo

  • Adobe PDF Reader Publisher 'not available' in IE Manage Add-ons

    Some users of a website that displays PDFs in the browser are not able to view the PDFs.  These users are using IE9 and Adobe Reader XI on a Windows 7 machine. They have gone through uninstalling, reinstalling, and repairing Adobe Reader XI and have

  • Adobe form:Data view problem

    Hi,       My problem is i am not able to see data in my dataview on layout. I have everything in my interface, context, but i'm not able to see anything in dataview. i tried reinstalling adobe designer but it didnt worked. Regards, Karthick.

  • HT201413 Iphone 4 restore with unknown error

    I have an iphone 4s in restore mode (connect to itnues logo). Itunes says it needs to be restored (clean). After downloading de software, disabbeling the firewall and virus software and fresh installing the itunes software. Itunes tries to install de