MacBook Air with external monitor and wired network

Hello,
I'm investigating the possibility to buy a MacBook Air 13", but I have a big doubt: most of the time I work in office, with wired LAN and an external DVI monitor.
I've seen that I can buy an USB to LAN adapter and a DisplayPort to DVI to connect to the Thunderbolt port, but in this case I will have only one USB port free a no other Thunderbolt.
Is anybody advising a different set of periferals to deal with this environment?
I haven't found any Thunderbolt "HUB" around, does this exist, to multiply the Thunderbolt port?
Thank in advance for any advice
  Massimiliano

Naturally yes .. The problem is not the USB itsself, but the fact that original adapters from Apple (LAN and DVI) are made from a Thunderbolt connector, and they do not replicate the port where they are connected to.
Others party LAN adapters that comes on USB port are only 10/100 Mbs, whilst the Apple's one is a Gigabit. This is why I asked for some sort of Thnderbolt hub, or any other experinced advice..
I know that the MacBookAir comes with a good 802.11n integrated wireless, but as you know (or can imagine), when you are in the office a Gigabit connection is another movie, especially if you are tranferring large amount of data or are connected to huge centralized databases.
I was preferring a MacBook Air to the pro for it's monitor: for me a 1440x900 is much more better than a 1280x800 when I'm out of office. On the other hand, the version with the retina display is at the moment too expensive for my budget.
The final solution could be a MacBook pro 15", but I was preferring the 13" when in mobility, for its form-factor.

Similar Messages

  • MacBook Pro with external monitor and keyboard.

    Hello, everyone.
    I've tried to find the answer for this question but haven't found a clear answer with my Google search.
    My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
    How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
    Thank you in advance for your answers.
    Joseph

    Hi Niel,
    I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
    Thanks!
    P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
    Message was edited by: qwertyphd

  • Using the MacBook Pro with external Monitor and Keyboard

    This may be a dumb question, but here it goes anyway:
    Can I use the MacBook Pro with an external monitor and a bluetooth keyboard and mouse without having it opened all of the time ?
    I am planning to buy a MacBook for my wife and most of the time she will be using it at her home office.
    I don't want her to use the computer opened all of the time when she is actually looking at the separate screen and using a separate keyboard. Having the laptop opened will only accumulate dust and reduce the lifetime of the built in screen.
    What I would actually need is a kind of "docking station", but Apple doesn't make that - I know.
    So can the MacBook at least be operated without the internal screen powered on while it is closed?
    Thanks for your help
    Martin
    Message was edited by: mdopp

    Yes - it's called clamshell mode:
    http://support.apple.com/kb/HT3131

  • Cisco Anytime Connect VPN working from iMac but not from MacBook Air with same settings and wifi network

    Hi guys,
    I'm having trouble connecting my new MacBook Air to Cisco Anytime Connect VPN.
    The same configuration works with my iMac, in the same network and same Mac OS Mountain Lion on both computers.
    After successfully connecting to VPN after a few seconds it gets disconnected and, what is worse, WIFI is not working any more in my macBook Air, I need to deactivate it and start again.
    With iMac with the same settings it doesn't happen.
    Any ideas?
    Thanks!

    Did you power cycle the network? That's always the first thing you want to do if a device is "missing" or not connecting to your network correctly.
    If you have not already tried this a few times, power down the entire network...all devices, order is not important.
    Wait a few minutes and place the MBAir close to the TC
    Start the modem first and let it run a few moments by itself. Then start the TC if it is the device connected to the modem and let it run a few moments. Then start each device one at a time the same way.

  • HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

    i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • Using the GT70 with external monitor and lid closed

    I wasn't sure where to post this question.
    I have several laptops and use external monitors. I close the lid on the laptops and the display continues to work.
    On the GT70, the system shuts down. It won't allow me to use the external keyboard and mouse or display the session.
    Any suggestions if there is a configuration option to allow the GT70 to continue to function with external monitor and lid closed.

    Yup. This is a windows setting. You need to go into your control panel -> power options -> "Choose when the computer sleeps" and "Choose what closing the lid does"
    That should solve the problem. I currently have my GT70 hooked up to a 42" TV and I can close the lid and it stays on and the TV continues displaying as well. No problems. =]

  • I want to get a macbook air with a 4gb and a 125 memory hard drive is it okay to use it with premiere.

    i want to get a macbook air with a 4gb and a 125 memory hard drive is it okay to use it with premiere

    Hi Mayelita521,
    Some have had success with light projects with the MacBook Air. Check out this article: WalterBiscardi.com | Yes Virginia, You Can Edit Video with a MacBook Air
    I'd love to have one for small personal projects.
    Thanks,
    Kevin

  • I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.

    I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.  Anyone have any ideas?  Thanks.

    From a Catherine to Katherine -- Had the exact same problem!!  I had to enable Java twice - both in Safari and then on the MacBookAir itself.

  • Why won't my macbook air see external monitor

    why does my macbook air sometimes connect to my external monitor and sometimes it won't - this is very frustrating. any suggestions???

    i get this too, its really fustrating, somedays it works, others it wont. I tried shutting it on and off, taking out the display adapter, exchanged the display adapter....this is so stupid!

  • Macbook pro with external monitor problem?

    i notice after turning everything on, using an external mouse and monitor, and then CLOSING the macbook pro, logic crashes alot. If I leave the macbook pro open, no crashes. anyone having this problem? no big deal, but it would be nice to be able to close the laptop if I'm using the external monitor and mouse in my main studio, and just using it as a laptop when I'm out on the road.
    thanks
    macbook pro
    OSX 10.4.6
    logic pro 7.2
    apogee mini dac and mini me
    2 gig ram
    7200 rpm HD internal
    7200 rpm Glyph external firewire HD

    that works, although the laptop isn't really close enough to my other monitor for that to make sense. I'd still like to know why it's acting this way.................... thanks for the feedback, though

  • Macbook air: i dont want my friend to hear what i am hearing on the computer while calling.   i have newest version macbook air with Lion.   and while calling someone via skype, i dont want them to hear what im hearing on the computer

    title self askes.
    macbook air: i dont want my friend to hear what i am hearing on the computer while calling.
    i have newest version macbook air with Lion.
    and while calling someone via skype, i dont want them to hear what im hearing on the computer such as Itunes, youtube, or whatever comes out of speaker.
    samething happends when im using headphones.
    i wanna listen to the music or watch youtube video during the call,
    but it is almost impossible b/c my gf can hear the sound coming off the computer much louder than my actual voice.
    this is not fun.

    You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
    You need to get a new computer or a refurbished one.

  • Sleeping Macbook Pro with External Monitors: Bluetooh prevents and annoys.

    I have a 2007 Macbook Pro.
    Recently I decided to go all wireless and now have a bluetooth mouse and a bluetooth keyboard, as well as external monitors. Here's the problem.
    1. I like to keep my macbook pro closed and use the external monitors alone.
    2. That means that I need to have the "Allow bluetooth devices to wake this computer" option selected.
    3. My mouse (microsoft bluetooth laser mouse) will prevent the macbook pro from staying asleep. I don't know why... seems to happen even if there is no movement, maybe the mouse is searching for the macbook to see if it is still connected, but whatever.
    4. I would like the bluetooth KEYBOARD to wake up the macbook pro, but NOT the mouse.
    5. The bluetooth control panel does not allow me to customize -which- bluetooth devices can wake the laptop, it's an all-or-nothing scenario.
    This drives me crazy. I can either disable bluetooth waking, in which case I am forced to open the laptop in order to wake it up, but then I have the darn laptop OPEN with the laptop screen being used when I only want to use my external monitors, OR I can have bluetooth waking enables, in which case the macbook rarely sleeps for long.
    Any ideas? I do not want to switch to a USB mouse or keyboard, nor buy a different mouse or keyboard. The keyboard is an apple wireless bluetooth keyboard, the mouse is a high quality bluetooth Microsoft keyboard.
    I can't think of any reason why I shouldn't be able to just wake the laptop from the keyboard alone.... or for a way to stop the laptop from waking up randomly when bluetooth waking is enabled.
    Any ideas?

    Anyone?

  • 17" MacBook Pro with external monitor issues under 10.6.4

    I have a 17" MacBook Pro 2.4ghz "connected" to a 23" Apple cinema display. For years now I've been able to just connect and wake from sleep with the MBP closed and start working. Ever since I've upgraded to 10.6.4 I have had problems getting my external monitor to switch on. I've had them both in the my local service centre and had them tested and they're both working fine individually. I though it may have been a power supply or Nvidia problem but they're fine. I can't get my monitor to wake either with the MBP closed or open. The sleep light will be lit but there is nothing on the monitor. I've zapped the PRAM, reset the SMC, run DiskWarrior and repaired permissions. Nothing works. I've even followed Apples guide to using them together under clam mode. Still no joy. So for now I'm stuck without being able to use my monitor which has been tested and is functioning properly. I'm wondering if anyone else has the same issues.

    that works, although the laptop isn't really close enough to my other monitor for that to make sense. I'd still like to know why it's acting this way.................... thanks for the feedback, though

  • Use Macbook Air with external speakers

    Does anybody know if the Bose Companion 2 Series III Speakers can be used with an macbook air. If yes, is there any adapter needed or can I just plug the cable of the speakers into the MacBook Air headphone jack?

    Naturally yes .. The problem is not the USB itsself, but the fact that original adapters from Apple (LAN and DVI) are made from a Thunderbolt connector, and they do not replicate the port where they are connected to.
    Others party LAN adapters that comes on USB port are only 10/100 Mbs, whilst the Apple's one is a Gigabit. This is why I asked for some sort of Thnderbolt hub, or any other experinced advice..
    I know that the MacBookAir comes with a good 802.11n integrated wireless, but as you know (or can imagine), when you are in the office a Gigabit connection is another movie, especially if you are tranferring large amount of data or are connected to huge centralized databases.
    I was preferring a MacBook Air to the pro for it's monitor: for me a 1440x900 is much more better than a 1280x800 when I'm out of office. On the other hand, the version with the retina display is at the moment too expensive for my budget.
    The final solution could be a MacBook pro 15", but I was preferring the 13" when in mobility, for its form-factor.

  • Probems with external monitor and Nvidia Ion on Netbook

    After I updated yesterday, I can't use my external monitor properly anymore. Before, I only had to plug in a monitor and everything worked fine, now everything is displayed twice, on both monitors simultaneously.
    I tried using nvidia-settings to change the settings, which told me
    You do not appear to be using the NVIDIA X driver.  Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
    , but after running nvidia-xconfig, xserver didn't start anymore, so I deleted the file that had been created.
    Now I don't know where (and to what) to change my settings so I can use my external monitor again.

    Reposting from AskDifferent forum. If you have the newer MBA that include USB 3.0 ports, you are in luck. There are now USB 3.0 to GigE adaptors, freeing you to use the Thuderbolt port for external display.
    Search for the USB31000S by StarTech
    http://intrl.startech.com/Networking-IO/Adapter-Cards/USB-3-to-Gigabit-Ethernet- NIC-Network-Adapter~USB31000S
    Sadly, for those of us with mid-2011 MBA, it's either buy the $1K Apple display or live with 100BaseT...

Maybe you are looking for