MacBook air won't install Mavericks, can't use utility to restore

I Tried to update the operating system on my 2013 MacBook air, it gets stuck about 12 minutes in then won't install. I have tried to use the disc utility to restore previous os but it says the disc needs repair but the repair function is not availabl. Any ideas how I can fix?
thanks

It was is lion or 10.7, now when I start up it goes straight to the maverick installation prompt. It goes through this for a few minutes then comes up installation failed. Contact the software manufacturer for assistance. So for some reason it's not allowing the installation of new so to be completed but I think it may have gone to far to restore old OS.

Similar Messages

My MacBook Air won't charge, what can I do?

My MacBook Air won't charge up at home. Today I brought it to the Apple Store,and it worked OK there. What could be the cause? In the Apple Store, we even used my charger, and it worked. At home now, the green or orange light doesn't come on and the computer loses the little charge it has (4% right now). Very frustrating.

Hi Lisa,
My macbook air has the same issue.
I get no light on the power adaptor (45W) and no charge appearing on the onscreen icon.
This issue seems to happen intermittently and after being fine for the last few months it started again today.
After trawling through a lot of forums I tried a piece of advice which did work and my macbook is now charging.
The advice was to simply heat up the charger a few degrees, which I did by putting a warm fan blower on it. My charger started working within a few minutes.
Hope this may help,
Craig

My new MacBook Air won't install the latest software update. How do I fix that?

I can't get my new MacBook Air to install the latest software update.
It keeps telling me that an "unexpected error" occurred.
How do I fix this?

Your posting above says you're running Lion (Version 10.7.3).
Going to the current version of Mountain Lion (Version 10.8.2) requires a $20 purchase (upgrade fee) from the App Store.
Further, if your iMac is older than mid-2007, it cannot be upgraded to Mountain Lion. Only mid-2007 or newer iMacs can handle it.

Macbook air won't install updates

I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
Thanks in advance.

I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
Thanks in advance.

How do I return my mid 2011 MacBook Air to Factory Specifications? Can I use the built in Lion recovery and wipe my data from the hard disk by reformatting it?

I want to trade in my old mid 2011 MacBook Air for a new MacBook Pro. After I have transferred my data to the new MacBook Pro, how do I reformat the hard disk to wipe all my data and return it to Factory specifications? Will the built in Lion recovery allow me to do this? I am currently running OS X Yosemite. Has the upgrade to Yosemite damaged or removed the original Lion recovery partition?

Click here and follow the instructions.
(124038)

MacBook Air won't install via DVD or Remote Install?

Gang,
I have a 2.13/128 SSD MMA with Bootcamp installed (30G partition vista).
I got my SL yesterday and loaded it on my new Pro 13 no problem. I went to install it on the air and the same thing seems to happen.
I use a off the shelf DVD drive self powered USB and can boot off the distribution disks as well as the Bootcamp vista.
So I put in the SL DVD and hit install it ran some stuff then rebooted and after about 5 minutes of white screen it booted back into 10.5.8. So then I tried booting off the SL DVD and the same thing happened. I then tried remote install using both Ethernet and Airport and the same thing happens.
White screen for about 5 minutes then it boots up normally into 10.5.8.
Any ideas? Is it the Bootcamp partition?
Thanks
Gordon

Gang,
I used WinClone to clone my Vista partition and then deleted it with Bookcamp and it still did not install.
So I set the Air for Ethernet (USB) and my mini for Ethernet and then Snow loaded just fine.
So it was probably not the Vista partition which I now have to figure out how to reinstall.
Thanks
Gordon

Macbook won't install mavericks

I have a mid 2010 Macbook (the white model, last regular macbook to be made) and it won't install Mavericks. It currently has Snow Leopard installed because this is the only OS it will accept, any newer OS downloaded from Apple gives me the same error message while trying to install "Install failed, restart your computer and try again" and no matter how many times I try it won't allow me to install either Mountain Lion or Mavericks. I should also note that this laptop seems to be failing, the magsafe port is broken and the laptop won't charge, but will accept the plug as a power source and the DVD drive was broken and has been removed. Please help because this Macbook used to be running Mavericks just fine, but after a wipe of my HDD and an attempted reinstall it became glitchy and broken. I have also verified and repaired the disk countless times and nothing fixes this issue. Is my HDD failing? I just need to know so I can fix the problem, Apple charges too much for simple repairs

It was is lion or 10.7, now when I start up it goes straight to the maverick installation prompt. It goes through this for a few minutes then comes up installation failed. Contact the software manufacturer for assistance. So for some reason it's not allowing the installation of new so to be completed but I think it may have gone to far to restore old OS.

My macbook air won't load. Says start up disk is full but I can't get the home page to open

My Macbook air won't load. Says the start up disk is full but won't open the home page so I can do anything about it

Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie

My MacBook Air won't start up. It's completely powered, yet when the white screen with the apple shows up upon me turning it on, it shuts right back off. Can someone help?

MacBook Air won't start up even though it's fully powered. The white screen with the apple logo appears when I turn it on, then it shuts right back down. Can someone help me?

Hey Msazama30,
First, I would start off your troubleshooting by following the steps in this link:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Then, if that doesn't work, try out the information in here:
Step by Step to fix your Mac
https://discussions.apple.com/docs/DOC-3353
Welcome to Apple Support Communities!
All the best,
Delgadoh

Since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg

since updating my macbook air with OS X mavericks i can't send emails smtp account failed my email host is 123reg any ideas how to sort it out?

I am having the same issue with Media Temple Email.
My problem in more detail is:
Adding my Media Temple Hosted domain email to a desktop service on my Macbook Air.
I have tried this on both Mac Mail and Thunderbird.
I add the account manually and have checked, double checked, triple checked the server addresss and also the user name and password and they are correct.
I have altered the ports from being default to custom and have tried both SSL and non SSL and still it is unable to connect to the SMTP server.
IMAP inbox is working as I recieve mails but can not send them.
I have chatted to Media Temple and they say it must be something to do with the hardware of the MacBook Air which to start with I disagreed with but I have since tried adding the email to my Mac Mini and it works fine.
I am assuming their is an issue in the MacBook Air with the SMTP ports and I would really appreciate some advice on how to fix this as I don't want to use Webmail for ever.
Thanks in Advance

Macbook air won't allow me to install any torrents, what do i do?

I have been trying to install uTorrent and my Macbook Air fails to install, what do i need to do?

Contact the Utorrent group about this.
Torrents are 99% illegal downloads, ...seek help from them, Reconsider your use of same.

Cant open doc files from the server on MacBook Air after upgrading to Maverick

Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

My macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

my macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My new Macbook air won't connect to my Vizio HDTV.

My new Macbook Air won't connect to my Vizio VO32LF HDTV. I bought a mini-displayport to HDMI cable to connect the two. When I connect the cable, and switch to the appropriate HDMI input on the TV, my Macbook Air screen will flash blue for a second, and then return to normal. The TV reports it's unable to find a signal. I use the HDTV as my primary monitor, so I'd really appreciate some help on getting the two to place nicely together!

Cp,
Thanks for the reply. However, it appears that the issue is not with the hotspot, but with the network settings in the MacBook Air as every other device I have (including non-Apple devices) will connect to the iPhone hotspot. Another symptom is that my MacBook Air can find my iMac (and other network devices) on my wireless network, but the iMac can't find the MacBook Air.
KDR

MacBook air won't install Mavericks, can't use utility to restore

Similar Messages

Maybe you are looking for