MacBook Air won't reboot

Suddenly, my Macbook Air will not fully reboot. It seems as though it cannot load everything it needs to to start up correctly. It can get to a startup screen, but I cannot install updates, etc. I have tried all the suggestions I can find on these Forums - many have solved other associated problems. Zapping the PRAM brought back the missing start up chimes, but this has solved the other issues.
I have tried Safe Mode so many times thinking that it would help - but it's not to be. I have run the Diagnostics start up and it says everything on the inside is fine.
I have tried verifying and repairing the disk and it says everything is fine I have erased the disk and reinstalled a clean OS (V 10.6.4) - nothing has changed.
Any further help would be much appreciated.

If you have erased the drive and reinstalled OS X but the problem persists, then you have, most likely, a hardware problem. Please make a Genius Appointment and take it in for service.

Similar Messages

  • Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

    Hello to you all,
    My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
    when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
    Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
    Please, should you have any solution please send me the details to [email protected]
    Thanks you a millionh times.
    Al.

    The MBA seems to cause several problems to several users on boot ups
    On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I  took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
    On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

  • My new Macbook air won't connect to my Vizio HDTV.

    My new Macbook Air won't connect to my Vizio VO32LF HDTV.  I bought a mini-displayport to HDMI cable to connect the two.  When I connect the cable, and switch to the appropriate HDMI input on the TV, my Macbook Air screen will flash blue for a second, and then return to normal.  The TV reports it's unable to find a signal.  I use the HDTV as my primary monitor, so I'd really appreciate some help on getting the two to place nicely together!

    Cp,
    Thanks for the reply. However, it appears that the issue is not with the hotspot, but with the network settings in the MacBook Air as every other device I have (including non-Apple devices) will connect to the iPhone hotspot. Another symptom is that my MacBook Air can find my iMac (and other network devices) on my wireless network, but the iMac can't find the MacBook Air.
    KDR

  • MacBook Pro won't reboot.  Get spinning circle even after hard drive replaced at Apple Store

    MacBook Pro won't reboot.  Have to reinstall OSX each time I shut down in order to get it to start up.  What could be wrong?  I had the hard drive replaced already.

    You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • My macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..

    my macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..i tried to open the macbook air again but nothing happened.. no fans, no chimes, no light in the laptop showed..what should i do? please help..thank you

    Welcome to Apple Support Communities
    A green light means that your battery is full or that it can't be detected. If you can't start up the Mac, probably your logic board or battery aren't working.
    Take the MacBook to an Apple Store or reseller to get your battery or logic board replaced. If the MacBook is in warranty, this repair will be free

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • After installing Maverick on my Macbook it won't reboot

    After installing Maverick on my Macbook it won't reboot. It fully downloaded and intalled fine and once it had finished intalling, a pop up message said that my macbook with restart in 10 seconds. i restarted my macbook but it never did anything more than have a grey screen with the apple symbol and a spinning wheel underneath that.
    I have tried starting in safe mode (holding down shift), ive tried holding down command, option, R and P but that didnt work, I have tried holdig down command and R and that didnt work. Holding down option when turning on did work but when i go into disk utility and i try to verify and repair disk of my 250GB Toshiba MK2555GSXF Media i get a warning saying "Live File system repair is not supported"

    Hi,
    On the iOS devices remove the Apple ID.
    Set the device in to Airplane Mode (this breaks with the server)
    Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
    The Restart the Mac Version
    Accept the pops ups that state what the iPhone  is using.
    Do same on iPad.
    8:31 pm      Wednesday; April 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • MacBook Air won't connect with TimeCapsule

    I recently bought the new Time Capsule and for a while it was happily backing up both my and my wife's MacBook Airs. Then it stopped backing up my wife's computer. On investigation I find my wife's MacBook Air won't connect to the Time Capsule. When I try to select the Time Capsule as the back-up disk an error message appears: "There was a problem connecting to the server "John's AirPort Time Capsule"". I can see the Time Capsule in Finder on my wife's computer but when I click on "Connect As" I get the same error message. On my computer the Time Capsule appears in Finder as Connected, but disconnecting it doesn't make any difference to my wife's computer.
    Any help gratefully received.
    J

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

  • My MacBook Air won't start up.  It's completely powered, yet when the white screen with the apple shows up upon me turning it on, it shuts right back off.  Can someone help?

    MacBook Air won't start up even though it's fully powered.  The white screen with the apple logo appears when I turn it on, then it shuts right back down.  Can someone help me?

    Hey Msazama30,
    First, I would start off your troubleshooting by following the steps in this link:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Then, if that doesn't work, try out the information in here:
    Step by Step to fix your Mac
    https://discussions.apple.com/docs/DOC-3353
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • My brand new MacBook Air won't turn on all the way.

    Hi my brand new MacBook Air won't turn on all the way. If I try to restart it or shut it down, it will go like it is starting up, but goes to a gray screen and stays there. I can see the mouse and move it, but it won't turn all the way on. What is wrong with it? It had been working fine since I got it, but today it hasn't been.

    You may have to see if troubleshooting this issue can help, though the instructions on a process of elimination by symptoms are tedious in the following support article, and are suggested to be performed ahead of trying the process described in the title.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    For the actual SMC reset, note subsection in above, instructions click-open on blue text:
    >Resetting the SMC on portables with a battery you should not remove on your own
    If the computer does not shut down, and just hangs there, try pressing the power button down for 15 seconds. Check the suggestions in the above article to see if any of them can be used, if the computer will power-up.
    There is another item that sometimes can help, but the main issue you say could be resolved by the SMC reset; this other thing is involved NVRAM (non-volatile random access memory) so here's an article about it.
    •About NVRAM and PRAM:
    http://support.apple.com/kb/HT1379
    >Resetting NVRAM/PRAM opens in above, click-to-see instructions on how to reset.
    You may have to call ahead to the nearest Apple Store for an appointment to see a Genius; or at authorized reseller, their service product specialist who should be trained to understand how to proceed, just in case there is a hardware issue behind the symptoms. When you call, be sure to have the serial number and purchase date available, when you call an official store.
    Or use the 'Apple - Support - Contact Apple Support' to start the process...
    http://www.apple.com/support/contact/
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • My macbook air won't turn on and doesn't charge?

    my macbook air won't turn on when it is plugged in.  The light on the connection is orange, not the usual green.

    Orange means charging.
    Keep it plugged in for a while.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    For more on this:
    http://support.apple.com/kb/TS1365

  • MacBook AIR won't TURN ON!!

    My MacBook Air Doesn't turn on. I did everything already, pushing the shift+ctrl+option etc. 5 seconds 10 seconds etc. still no power, there is a green light on the charger but no light or sound coming from the macbook air. This is like only a month old, so there is still warranty. the problem is I have "very important documents" in my macbook air and how would i get assurance that the files won't be corrupted, used, or lost?

    Guys! I HAVE THE SOLUTION!
    I hope everyone with the same problem read this!
    I posted my macbook AIR won't turn on.
    I coulding risk bringing it to MAC Store and leave it there because I have PRIVATE FILES.
    I tried almost every other options, instructions in youtube etc. but nothing worked.
    but now it WORKS
    All i did was plug it for 24 hours straight. Tried turning it ON again but wouldn't work..
    I left it in my room for about 1-2weeks, thinking it was hopeless.
    one day I pressed the power button again THEN it came back to LIFE!!
    So guys dont lose hope. Try resting it for a few days then try again.
    hope this helps

  • My MacBook air won't open internet, email, photos or print,it keeps asking for my keychain login, but I don't have a login for keychain

    can anyone help, my MacBook air won't let me connect to Internet, open and read emails, won't open photos or print, it just goes into standby mode, I have to go to forced quit.
    also now i keep getting login for keychain, but I don't have a login for keychain, but I can't get rind of it.
    any ideas, or do I need to have a diagnostic run on it?
    thanks

    What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

  • My macbook air won't load.  Says start up disk is full but I can't get the home page to open

    My Macbook air won't load.  Says the start up disk is full but won't open the home page so I can do anything about it

    Step 1   
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later. 
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

Maybe you are looking for

  • How to get week number and day in my result?

    hi experts, i have given the data is ID and DATE(yyyymmdd),i want to get output like ID,DATE,WEEKNO,YEAR,MONTH,DAY. how to get this output. thanks & regards vijay

  • Cross company sales with multiple operating concern

    Hi all, I'm going to implement cross company sales in a system that is already live. I think that it really fit to the new requirement of the client , that want to allow the possibility of creating a sales order from sales organization A1 of company

  • JSP page import problems

    Hi, i've got a problem with importing java classes into my jsp file. i use the following method: <%@ page import="Person" %> Person is originally a selfwritten class which lies in the subdirectory WEB-INF/classes of my webapps directory of my tomcat

  • Hp laserjet 3800n problem printing envelopes

    My laserjet which I've had for years always has a hard time printing envelopes, but usually if I try several times they will print, but today it isn't working.  What it does is hum for about 30-60 seconds without feeding envelopes, then stops and say

  • Newbie at Illustrator scripting needs help assigning image

    I am trying to copy a graphic stored in a vb.net picturebox.image into an activeLayer of an illustrator document. Can anyone supply me with code as to how to do it. Also is there a way to lookup a swatch by name and not have to rely on knowing it's i