Macbook Aluminium. Single, long beep upon startup and update to Snow Leopard wont work.

Hi, I recently formatted my late-2008 Macbook and installed Ubuntu. It didn't work so I formatted again and installed Leopard. When I boot I get a single long beep. When I try to update to Snow Leopard and reboot the OS still shows up as 10.5 (Leopard).
It seems to function normally besides all this. I have not touched the memory in this time and the OS recognises the full 4GB I have inside. I also did not touch the hardware, this whole problem seems to have been caused by my attempt to install Ubuntu.
Any help out there?
Thanks guys.

I have exactly the same problem for some days because I installed Ubuntu 11.04. Thanks God I found a way to fix it:
https://discussions.apple.com/message/15375400#15375400
Go to the video on youtube and see how you got your EFI firmware flashed Reboot and the long beep should go away

Similar Messages

LR catalogue and updating to Snow leopard

Hei,
I am about to update my my OS X (Leopard) to Snowleopard and was thinking of doing a complete update, since my mac has become quite slow, so I'd like to use this opportunity.
My question is concerning my LR (v. 2.4) catalogue. I don't store my photos on my mac itself but on external hds and use Time Machine to only back up my system. After reinstalling LR on Snow leopard, is it enough to put the catalogue back to the same destination it was on Leopard? Will the LR catalogue find the photos on the ext. hds?
It would be a desaster if all LR work would have be in vain, approx. a year worth of work.
Has anyone done what I am about to do? Any experience? Any idea how to do this?
thanks for any answers!
Sasku
imac - osx 10.5.8.

Sasku
A couple of comments:
1) Apple do not recommend doing what used to be called an "erase and install" with Snow Leopard however there are plenty of sites that recommend what you are proposing. I upgraded from Leopard to Snow Leopard on a machine with a fair number of existing apps installed without doing an erase (I don't have the time) and have had no problems.
2) In terms of ensuring your "edits" are saved, you should ensure that you have saved the changes you have made to the metadata for the images on your external hard-drive. I have LR2.4 set to do this automatically (i.e. write xmp) but if you don't you can select to save metadata to those files (before you upgrade OS) under the "Metadata" menu item.
Raf

Verifying and repairing in Snow Leopard not working

Hi everyone.
I have a white MacBook (3,1) running Snow Leopard, Mac OS X 10.6.8. My computer was running extremely slowly so I opened the Disk Utility to try to repair it. Disk Utility told me I needed to run my Snow Leopard installation disk and verify disk permissions from there. I did so, and even though the estimated time said 27 minutes, it ran overnight, generated a long list of broken permissions, and nothing else happened. I rebooted and now I could select "Repair Disk Permissions", so I did so, and again, the estimated time was 25 minutes but nothing happened.
From browsing the support community I see that this is a known issue with Snow Leopard. What can I do to verify and repair permissions so I can then verify and repair my disk? I would appreciate any information whatsoever.
Thanks,
Christine

Try it this way:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

My 2010 Macbook Pro display is distorted upon startup and I can't login or see apple icon/progress bar. How do I go about fixing it? Thanks.

I have a 17" MAcbook Pro purchased late 2010. Recently has developed some display problems, y'day ran in safe mode and it fixed it and I was able to login etc., This morning when I boot up, it shows display distorted and I can't see apple logo or progress bar etc., and am unable ot login. I need to atleast be able to recover my files before I give it for fixing (if it needs to be repaired). Any steps you folks recommend for me to run? Any diagnostics or other tips? If I run safe mode, it seems to hang after a while and it is hard to read the screen to know exactly where it is stuck.....as the display has problems.
Thanks for your help.

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have

I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?

Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open  > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Just purchased a ipad2, could not us it on my MacBook 10.4.1 - Purchased and installed OSX Snow Leopard 10.6.3 - downloaded and installed latest itunes, set up a itunes accounts and tested by purchasing an album and app, ipad does not show in devises?

I just purchased a ipad2, it would not work on my MacBook 10.4.1 I purchased and installed OSX snow leopard 10.6.3 downloaded and installed the latest itunes, set up an itunes account, purchased some music and apps. When i plug in my ipod it shows up and works, but when i plug in my new ipad the ipad screen comes up with a display of a cable and itunes but does not show in devises, i have tried all the resets and different USB ports with no success. Any ideas short of selling it on ebay or buying a new computer?

If you've already tried the usual rebooting of the computer and ports and stuff, there is only a few things left I can think of. It's possible that when you updated iTunes it didn't fully replace all the files, so I suggest just manually removing iTunes and then reinstalling it.
Try removing iTunes manually first http://support.apple.com/kb/HT1224 then download a fresh copy, make sure it is 10.3.1
It is essential that you go through Finder to remove those files it mentions. Otherwise they won't be reinstalled when you run the installer again.

Can't insert a CD/DVD into the disc drive. Recently installed a new harddrive, and the CD/DVD drive hardware is no longer recognized. Also, with new harddrive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP.

Can't insert a CD/DVD into the disc drive. Recently installed a new 1 tb hard drive, and the CD/DVD drive hardware is no longer recognized. Also, with new hard drive, OS was updated from Snow Leopard to Mt. Lion 10.8.5 on late 2007 MBP (2.2 GHZ Intel Core 2 Duo. 4 GB 667 MHZ DDR2 SDRAM)

Also, when I check out the hardware list, under Disc Burning - the following is reported: No disc burning device was found. If the device is external, make sure it’s connected and turned on.
The disc drive worked fine prior to the HD upgrade and OS update to Mt. Lion.

I updated to snow leopard recently and when i turned on my macbook every file from pictures and music was on my desktop.. are these copies? is there an easy way to put them where they belong like music with itunes, pictures in iphoto and so on

Hi, I updated to snow leopard recently and when I turned my macbook back on icons from every file of pictures and music i have were all over my desktop
how can i get them to all go to their programs like music to itunes, pictures to iphoto, do I have to do it individually? thanks for any help

If the icons have a black arrow bottom left corner, then the icons are just aliases, not the Application itself. You can move those icons to the Trash.

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

I have a black MacBook from 2008 and tried downloading snow leopard 10.6. It told me I had to restart my computer. However once I restarted my MacBook my touchpad and keyboard were not working so I am unable to sign in. I have no idea what the problem is

You cannot download the upgrade to Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

What is the Best Way to Re-Image and Re-Install Snow Leopard on MacBook Pro

Hello,
Is there a well documented best practices procedure for re-imaging and re-installing Snow Leopard on a MacBook Pro?
Thank you for any assistance.
Tony

Hi Tony;
The only best practices I know for that is backup first. I usually suggest a bootable clone that has been tested so that you are sure it is bootable. Insert DVD and boot from the DVD. Then install Snow Leopard. That's it.
Allan

Just updated from snow leopard to lion and now my macbook won't charge

just updated from snow leopard to lion and now my macbook won't charge

Try a SMC reset:
http://support.apple.com/kb/HT3964
Ciao.

After updating to snow leopard and trying to delete mackeeper flash player will no longer work. Can anyone help me?

After updating to snow leopard and trying to delete mackeeper, Flash player is being blocked and will not allow me to view utubes. Can anyone help?

Here are instructions for eradicating MacKeeper - you may need to re-install it to uninstall it fully:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
Regarding Flash - there are many reports on here that v13.x isn't working for a lot of people. distractme in the following thread posted instructions on how to install the previous version, which should work whilst Adobe work on a fix:
https://discussions.apple.com/message/25430408#25430408

My ipod 4 Generation wont start. I have tried the hold lock button and home button but it wont work. any ideas?

My ipod 4 Generation wont start. I have tried the hold lock button and home button but it wont work. any ideas?

Try holding the buttons longer--at least a minute or until you see the Apple logo light up.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Macbook Aluminium. Single, long beep upon startup and update to Snow Leopard wont work.

Similar Messages

Maybe you are looking for