Macbook and final cut express.

Hi. All can anyone answer me this. Why oh Why the @$^&*(£ **** you can't use fcp express on a macbook? and are stuck with imovie. I thought having read the website it was compatible with dual macbooks but oh no you have to have a agp graphics card what a con!!!!!!!!! this now means i have to go get a macbook pro. Don't get me wrong i love apple stuff and have g5 dual tower etc... but need to do stuff on laptop and am getting fed up with this. So if anyone has a solution to get it to work i would be very grateful.
Martin

Hi guys
Final Cut Pro DOES indeed work on a Macbook. I have discussed it with both a Genius bar employee at an Apple Store, as well as an Apple-Certified Final Cut Studio professional.
I am currently running the entire Studio 1 (with the exception of DVD Studio Pro, but only because I did not have enough drive space) on my 2.2GHz 1GB Macbook.
You just need to be aware of the amount of hard drive space you use (the studio takes up several gigs in itself, and you also need to allot yourself at least 10g for batching, rendering, and exporting.
I run it fine with 1 gig of memory.. but if you want it to run well, get a memory upgrade!
best of luck!

Similar Messages

MacBook and Final Cut express 2.0

I tried to install final cut express 2.0 on my macbook and it said there was no AGP card. I've read a few topics on it so my question is should I or can I get an agp card, or is it better and cost wise just to upgrade to 3.5?

Welcome to the Apple Discussions!
Your version of Final Cut Express won't run on an Intel-based Mac. Apollo Adama is correct, you need to get the upgrade version of Final Cut Express 3.5. You can get it at your local Apple retail store or online. You can't just buy an AGP graphics card, the graphics card is built-in to the MacBook.
-Doug

Dropped frames on Brand New Macbook and Final Cut Express!

I have recently bought a New Macbook, and installed Final Cut Express HD 3.5 on it. I have Quicktime Player 7.3. My Macbook is a 2GHz Intel Core Duo processor. Memory is 1GB 667 Mhz. I have already used up a lot of Hard Drive on my Laptop with other applications, and in my capture window it says that I have 24.5GB space (109 minutes). Could this be the problem - not enough space?
I have looked over past discussions on this and in some cases I see that a downgrade to the old version of Quicktime has been necessary. As I have a new Macbook and new Final Cut Express HD, could this still be the case?
Also I have been reading the manuals, and wonder if the frame rate or time code settings could be affecting the dropped frames? Does anyone know where I can check this?
I'm a total newbie to FCE so be gentle....
Appreciate all advice

You are quite frankly, a genius. I have just managed to capture my footage after a gruelling few days of trying just about anything. Your recommendations regarding settings and also the external hard drive have fixed my problem.
I'm going to have a large glass of wine now to celebrate my victory - and then I'm going to try and figure out how you actually use FCE after that.... er hem... now where did I put that manual..?
Thanks loads

Adobe CS4/5 and Final Cut Express On a MacBook Air?

Hey all
Im planning to get a MacBook for my GCSE's, and im leaning towards the air.
I will be running applications such as Adobe Photoshop CS5, After Effects CS5, Lightroom CS5, and Final Cut Express regularly, so would a 13" 1.86ghz MBA C2D Processor with 4gb of RAM be able to run these apps fast and efficiently with no lag? Or should I opt for the baseline MBP 13"? Im also looking for portability, as im going to be taking it into school
Thanks

After effects!? Yikes... that is a beast of a program! Depends how in depth you plan on using it. Are you going to be doing 3D animations with several camera layers? If so, I don't think a MBP is going to work too smoothly. If you are doing basic to moderate use of AE functions then I think it would work fine.
Just a heads up before buying, check out the apple refurb store. They have a bunch of MBP with different specs for a very reasonable price. I got my 17" MBP from there and it works awesome with the same warranty as new... for like $500 off!

Photoshop CS3 and Final Cut Express

I am having some issues trying to bring a .psd file into FCE as a sequence. Every book/site/thread that I read says that as a program default FCE will import .psd files as layered sequences; however, when I save the file and try to import it it comes in as a clip with no layer functionality. I have tried .psds with "Maximize Compatability" on and off, layered tiffs, .psd 2.0 and nothing has given me the layers I am looking for. Any thoughts?
Using:
MacBook with Final Cut Express 3.5.1
Dell Precision with Photoshop CS3 Extended

Item number one looks very helpful... annoying but helpful.
I'll have to see what I can do to work around this. And Macs usually play so nicely with others...
Thanks, I'll let you know.

Best Settings using the new Canon HV30 and Final Cut Express HD v3.5.1?

My wife presents programs at schools and uses digital movies that we make and edit as one of her media materials. We want to present higher quality videos that look more film-like. I am hoping that the combination I described above will enable this improvement. In the past we used a Canon ZR20 and iMovie HD and put these on DVD's that were then played on a MacBook Pro with with QuickTime or iDVD hooked up to an Epson PowerLite projector.
I am now the proud owner of a new Canon HV30 and Final Cut Express HD3.5.1 (had FCE for a while so know how to use it). From my research, though, it looks like FCE will not be able to handle CINE MODE recording in combination with 24fps progressive frame rate [HDV(PF24)] which would allow the enhanced effect of the Cinema Mode. I can't justify the cost of Final Cut Studio 2 so I am hoping that the new [HDV(PF30)] will allow me to more easily edit in FCE.
Does anyone know if this is true and if so can please tell me the settings that I need both on the camera and in FCE to get the best quality movie that can played directly from my MacPro using QuickTime or iDVD or from a DVD in the MacPro using the iDVD player. I won't have the opportunity to always play the videos directly from the camera to an HDTV because of the school setting and the need to use a projector.
I know this is a lot to ask for, but I am sure that it will come up again and again as more people purchase this new camera. Thanks for your time.
Sincerely,
Lou Hosta

Without totally repeating myself with my post to MaccyLeopard, I haven't shot any footage yet. After doing a lot of reading I think I confused myself more than helped myself as far as settings go. So if you remember from my initial post I am asking for advice and guidance primarily on camera settings with the HV30 that will be used in a classroom (artroom) setting and then edited using FCE HD v3.5.1. I wish I was the type of person that could jump right into using a new piece of equipment but I like to get the advice of others beforehand. That way I'm not always questioning myself as to 'whether or not is this the best I can get'. I also am wondering if the 30fps frame mode would be the best to use in the classroom setting? From my reading, this mode should allow more light onto the tape allowing me to shoot in conditions with lower light levels that are typically found inside? Finally, is FCE HD able to edit this new 30 fps frame mode of the HD30? I've heard that FCE HD can't handle the 20 fps frame mode.
Thanks for taking the time to help me out.
Sincerely,
Lou Hosta

Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?

You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5

Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5 be used on the same machine?
I'll post this on the Final Cut Express HD 3.5 thread too (but with the order reversed).

What you did was not enough to delete the preferences properly.
This article tells you how. It is for FCE2 but works the same for FCE3 so I assume it is also OK for FCE 3.5:-
http://docs.info.apple.com/article.html?artnum=93690
It's simple to do so try it before reinstalling etc. - You should completely uninstall before reinstalling:-
http://docs.info.apple.com/article.html?artnum=301182
Ian.

User Contributed Tips in Final Cut Express and Final Cut Express HD Forum

*The following User Contributed Tips are located in the Pro Applications: Video > Final Cut Express and Final Cut Express HD Forum:*
skalicki` - Working with AVCHD: Log and Transfer FAQs
http://discussions.apple.com/thread.jspa?threadID=2672530
Publish date: December 03, 2010
skalicki` - Final Cut Express: Basic Troubleshooting
http://discussions.apple.com/thread.jspa?threadID=2662419
Publish date: November 26, 2010
*The following related tips are located in other areas of Apple Discussions:*
Please see the User Tips Library

I'm relatively new to FCE myself, so I'll answer with what I know. I'm sure the more experienced folks will either add to or correct what I say.
1) For the Inconvenient Truth thing, I believe this would best be done in LiveType, which does allow you to do animations, and to work on individual letters and characters. Whether or not it could exactly reproduce the effects in the clip, I'm not certain, but I'm sure it could come very close.
2) For the Crowd or the Cross effects, there are two things going on at once: effects on the text, and effects on the video. My gut feeling is that both FCE and LiveType can do these, with lots of work and patience, but I'll defer to other people to answer.
3) The page peel is a transition built into FCE.

Panasonic SDR-H80 and Final Cut Express

Does anyone know whether the new Panasonic Camcorder Type SDR-H80 is compatible with an iMac running under the Leopard OS and Final Cut Express version 4.0.1?

Hey ,.. I just purchased the same videocam and I am having the same dilema? Did you figure something out on how to make itr work yet?

Sony DCR-TRV140 with Macbook Pro and Final Cut Express 4

OK all, I'm a Mac novice here. Just bought my first Mac last month and added Final Cut Express to it in order to have some nice advanced features when it comes time to edit all kinds of home video shot on the Sony DCR-TRV140 Digital8 Handycam...
But I'm having trouble figuring out how to get my MacBook Pro to recognize the camcorder.
I have a 4-pin firewire connector on the camcorder, and a 9 pin firewire connector on the Mac. Is it as easy as buying a 4/9 pin cable?
I thought about trying to hook it up through the USB cable... but haven't had any luck there either.
As you can tell, I'm quite new to this, so please be nice. Ha!
If I can provide any further information, please let me know.
Specifications for the Sony camcorder can be found here:
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=1055 1&storeId=10151&langId=-1&productId=11027762
or here
http://www.amazon.com/Sony-DCRTRV140-Digital8-Camcorder-Streaming/dp/B0000634T4/ ref=cmcr_pr_producttop
Thanks!!

Is it as easy as buying a 4/9 pin cable?
Pretty much.
Hello and welcome to the forum.
Here's one source of such a cable:
http://www.cablestogo.com/product.asp?cat_id=606&sku=50708
I'm not sure what Easy Setup you'll need to use in FCE, but, if you're in the USA, I think it will be DV-NTSC DV Converter or maybe DV-NTSC Firewire Basic.

MacBook Pro and Final Cut Express

Hi,
I want to know if Final Cut Express 4 runs smoothly on a MacBook Pro 15" 2.2 GHz with 60 GB hard drive. (If additional space is needed I’d use Verbatim SmartDisk 250GB FireWire/USB Portable Hard Drive)
I know I meet the minimum requirements to use FCE, but I need to know if I can make edits decently or well enough.
If not, what can I do to improve its usage?
Thank you!!!

MBP is fantastic for FCE/FCP/FCS.
I suggest 2 GB RAM at LEAST. I got 3 GB but mine is an older model; the new ones go up to 4 GB I believe.
Get the super fastest internal HD you can get. And then a FW 800 external (large as you can get).
I am saving up for a super large external screen; got a lousy analog 1024 x 768 right now but it works well for my FCE browser window and also sometimes for Canvas Preview.

Sony DCR SR42 files and Final Cut Express

Hi - I am the owner of a new MacBook which I bought specifically to edit movies from my Sony hard disk Camcorder. I have since found that this model is not on the list of supported camcorders for iMovie and in fact iMovie does not recognise the mpeg files saved by the camcorder.
Can anyone tell me whether Final Cut Express would work with this camera? If not I will probably have to exchange my mac for a PC laptop.

Hi there,
I'm having the same problem with the same camera. I'm replacing it with a mini DV (picture quality is much better and so is compatibility with iMovie '06 and FCE).
But I've still got a ton of footage from the Sony that I need to convert.
When you converted your footage, what file format did you use? Were you happy with the new quality? And was the resulting footage easy to work with? Anything else you can share?
Thanks for your help.
Bryan

Canon HF M400 and Final Cut Express?

I'm planning on buying a canon Vixia HF M400 camcorder and was wondering if anyone knows about or has had experience with its Final cut express compatibility. I know that with some AVCHD cameras final cut does not recognize the imported footage even when using log and capture, so i just wanted to make sure i don't buy a camera that i will not be able to edit with. if it matters, i plan on buying the latest version of FCE and editing on my macbook, using an external hard drive as a scratch disk.

Tony,
I have a HFS 10 which appears to be similar to the one you are looking at, and I have no difficulty ingesting the AVCHD video with Log and Transfer into FCE (note that this is different from Capture). However you should note that FCE is no longer available for purchase through Apple. You can find copies of FCE4 available on Ebay, but you should be aware that it not supported by the latest Apple OS Lion. Additionally there have been many reports of difficulty using FCE after upragrading to Lion.
Regards,
Marc

Macbook and final cut express.

Similar Messages

Maybe you are looking for