MacBook and Intel Core 2 Duo?

Hey there everyone,
It is great that Apple is announcing the Intel Core 2 Duo, but when would it be available in the MacBook or MacBook Pro?
I am starting school in January and would like some time to use my new MB or MB Pro, but don't want to make a decision to buy and have the next gen processor avail next week...
The special with the free iPod Nano or reduced price iPod ends September 16th. Why are people waiting until next Tuesday, September 12 to make any purchases...I hope no bombshell will be dropped on everyone.
I was totally prepared to get my MacBook or MacBook Pro tomorrow, but VERY hesitant now.
Any advice? Am I making a big deal out of this? Will I EVEN notice a difference between the Core Duo and Core 2 Duo?
The main reason I am not buying a MB Pro is the heat issue and yet the Core 2 Duo is predicted to be cooler...
Help!!!

Apple does not pre-announce updates like that. They also do not allow us to speculate on their boards about upcoming products.
It is close enough to a major conference that waiting a week would not necessarily be a bad idea if you can.

Similar Messages

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS?

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS? The Apple web says must have Intel Core 2 Duo. Please advise. Not knowledgeable enough to know if not having the 2 between Core and Duo is a stopper. Appreciate any guidance.

The difference between a Core Duo and a Core 2 Duo is a show stopper when it comes to running Lion. The Core Duo is still only a 32 bit chip, but the Core 2 Duo is a 64 bit chip. You need the 64 bit chip to run Lion.

Wireless N upgrade for Macbook pro Intel Core Duo (Purchased 8/2006)???

Firstly, I am a little angered that apple has not come out with any directly supported options to allow people with my macbook pro to upgrade to the new wireless N capability.
Therefore I have found a 3rd party option that is being offered by fastmac (http://fastmac.com/ncard.php) that will allow for wireless N wifi.
My only concern is if having this installed (professionally by them or by an authorized reseller, say compusa) would cause my entire applecare warranty to be voided or just the part that covers the wireless card. I could deal with having the wireless card voided as it would be under warranty by fast mac...
Macbook pro intel core duo Mac OS X (10.4.9)

Your warranty is not voided by installing the Airport card. However, any damage that may be caused by the installation of the card would not be covered under the warranty.
Secondly, the Airport Extreme card that supports 802.11n is available as an upgrade kit for Mac Pros. Some Apple dealers may be able to obtain and install the card for you in your computer.

Will Macbook Pro Intel Core Duo run Snow Leopard ok?

I have the following system spec on my Macbook Pro which i bought in Apr 2006:
2.16 Ghz Intel Core Duo
2 G 667 Mhz SDRam
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it. Any thoughts fromt he community are welcome

Yes. You can run Snow Leopard OK.
As you're starting from Tiger it's imperative you backup your current system before proceeding. That's best done by cloning it to an external HD using the Restore function in Disk Utility, or you can use third-party software such as CarbonCopyCloner or SuperDuper.
The reason for this is that although the installation should go smoothly with the installer replacing system files and leaving your user data and applications untouched, I have come across a couple that failed and could only be installed after erasing the Macintosh HD.
Buy the retail Snow Leopard disc; http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
and update to 10.6.8 with the combo installer; http://support.apple.com/kb/DL1399
Be aware that lots of software will need updating, not all of it for free (stand up, Adobe!), and you may well have difficulty getting drivers for older printers or scanners.
Ensure you select Rosetta from the optional installations to enable your older software to continue working.

MacBook Pro Intel Core Duo

I have a MacBook Pro running OSX 10.6.8 with an Intel Core Duo processor.
Is it true that I wont be able to upgrade to Lion when it is released?
My MBP isn't that old so why have Apple decided not to support it?
Any advice would be appreciated!
Thanks

Sadly it's true
Your Mac must have an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor to run Lion.
http://www.apple.com/macosx/how-to-buy/
The Core Duo processor was last used in a MacBook Pro in Mid-2006.
After that with the release of the Late-2006 MBPs the Core 2 Duo processor was used.
http://support.apple.com/specs/#macbookpro
So, it's 5 years old...
Personally I think Apple has abandoned the Core Duo because it is only a 32-bit processor and not capable of 64-bit.

ARD Admin and Intel Core Duo MacBook

I just received my new Macbook and used the Migration to transfer everything from my old 14" iBook. When finished, everything so far appears to be working fine except my ARD Admin. When first launching the app, I had to reenter the serial number. Now I get a message each time I launch the app stating that "The Remote Desktop Administrator software is out-of-date." I am instructed to go to software update and check for new software. That process results in word that my software IS up to date. I have tried doing a reinstall of the ARD software, with no help. What all do I need to remove in order to remove all the old software to do a new install? My boss is using the same software version on his MacBook Pro without problems. We are running ARD Version 2.2.
Also, I have some saved tasks on my laptop ARD that I would like to set up on my desktop G4. Is there an easy way to complete this process?
Thanks

I know that ARD likes the client to be as new as the Administrator software. I wonder if it doesn't like that your administrator is 2.2 and your client is more than likely 3.0 or higher being a new machine?
Is the client enabled on your laptop? If it is, try turning it off, then restart and start the admin software.

Macbook Pro intel core duo, will not boot to anything.

Greetings, I am currently having issues with my MacBook Pro. I get the flashing folder with the ?, but I can't boot to any of the startup utilities. I have tried all that I have read about on other posts, such as, trying to boot with the C key held down (it just gets to the folder ?), booting to disk utility didn't work ( held down keys and it went to the folder ?), I also tried getting to the hardware test, by holding D and having the applications disk in. And still everything I try gets me to the flashing folder ?. Also I do have the CD's that came with the laptop and tried to install from the mas os install CD and still get to the flashing folder ?. The reason it started doing this was because of this...... I had boot camp installed and was running dual boot with windows 7, then I had deleted the mac osx on the drive so I would only be using windows 7. I wanted to reformat the drive after this, but had a hard time finding out a way to actually do this, as the MacBook unlike PC's, doesn't have any BIOS, and at that time didn't know all the key commands to use at startup. So I downloaded a program from the net that can run at windows start and delete the HD before the computer fully boots windows 7. So after I deleted the HD I could not install any program or start any of the mac utilities at startup, and I did the PRAM reset, still everything that I try it gets me to the flashing folder ?, in the end. Could I have deleted all of the startup utilities when I wiped the HD? If so how can I get these back on my MacBook pro if I can't get the MacBook pro to read any files or start up utilities? Any help would be greatly appreciated.

UPDATE: I found a way to download firmware, I thought that it could be the reason I get the flashing folder with ?, because maybe I somehow damaged the firmware on my computer when I did the reformat. Alas I followed the directions to re-install the firmware and still I get to the same flashing folder. I used FirmwareRestorationCD1.4 I think it is the one I needed for my model, MacBook Pro 15" intel core 2 duo, and comes with osx 10.5 leopard I think, the OSX CD is stamped 2008 for 15" MacBook Pro. I can't check the properties of my MacBook because it has no programs on it, but this is what I think it is from memory and deduction. Well now I guess I have to ask the question, is the firmware the programs installed such as disk utility, and recovery mode? I need to read more I guess, and also I thought I needed to take the 1.4 off the end of the FirmwareRestorationCD in order for it to work, but the instructions for making and using the firmware CD is a bit vague. Another factor in this to make things more difficult, is that this computer is my second computer and it's a PC laptop, so I used a program download from the net to write .dmg files to disk, it's called Transmac, could this be another fault in my creation of the CD? I am out of ideas again as to what I need to do to get mac OSX back on my computer, I am still a bit new to the way macs work, so I could definatley use some advice. thanks.

Differences between intel core 2 duo and intel core duo?

Just curious, I know it may be a bit obvious, but im looking for those specific details. Thanks in advance.
Soon to be a MacBook Pro Mac OS X (10.4.7) Currently using a Dell - piece.of.crap

Check out these links.
Core Duo : http://www.intel.com/products/processor/coreduo/index.htm
Core 2 Duo : http://www.intel.com/products/processor/core2duo/index.htm

Leopard not wanting to install on MacBook Pro Intel Core Duo?

I want to bump up to Leopard on my two main computers (MacBook Pro Intel, and a tower, also Intel)... but as I'm using them 24/7 on projects I dare not have problems with ... I don't want any down time getting Leopard to run seamlessly on those systems.
To this end, I 'borrowed' the Leopard disks from my son, for whom I just got a new iMac ... and was going to try it out on my spare (no critical projects) laptop (MacBook Pro Intel). At the beginning of the install the pop-up tells me it can't 'install Leopard on this computer'.
Could this just be some new security device to inhibit pirating? Related specifically to new iMacs? Or am I going to have problems when I try to install the Leopard I was about to buy to upgrade all my computers?
All ears,
B.

FYI, an OS installer doesn't just blindly install all the OS components it contains; among other things it runs "pre-flight" & "post-flight" scripts to make sure the Mac's hardware is compatible with that version of the OS, to assemble some of the pieces (like preference files) on-the-fly prior to installing them, & to initialize & clean up some of the items placed on the drive during the installation process.
If it helps, think of it as little mechanized factory that builds customized, turnkey products based on the measurements & specifications it obtains from the buyer.
The retail version of the OS contains the generalized version of this factory; the OEM disk sets do not, since they are intended for one model only.
So, if you want to "test drive" the OS, do it on your son's Mac. You won't be violating the license terms & your test will be much more indicative of what you will see with the OS properly installed on your Macs.

Power and battery problems with MacBook Pro intel core duo

Hi there, I've been having this problem for about a week now with my macbook pro where it shuts down a second after it's unplugged, even though the battery is full. I tested the power cord with another that works, and the same thing still happens. I've zapped the p-ram, and reset the MPU where you take out the battery and hold down the power button for 5 seconds and all that. I think it might be the logic board, or something within that? Any suggestions before I send it in to Apple for investigations?

I started having the same problem several days ago. Unplug the magsafe connector, and the MBP powers suddenly powers off, even though the battery shows a full charge on both the menu bar and the battery leds.
I decided to try a new battery after reading a number of posts here about the same problem.
Back to normal with the new battery. So now I'll go back to Apple to get the non-functioning battery replaced under AppleCare. (I wanted a second battery anyways)
Hope this helps.

Esata and older macbook pro intel core duo 2.16 GHz

Hi. I'm sure this has been discussed elsewhere, but I can't locate a thread. To connect an external ESATA HD to my Macbook pro, is some kind of card needed, or does the laptop have an esata connector inside that can be accessed?
Thanks in advance....

"I can't locate a thread." Here's a starting point.
And, yes, you need a card. There's no extra connection internally.

Trying to install downloaded Leopard on my macbook pro intel core duo

I purchased Leopard from a third party site in which it was downloaded. I'm wondering if I can install it on my Macbook Pro? Everytime I open it is says to restart in order to install but it takes me back to my desktop everytime. The only reason I'm upgrading is because I purchased some photoshop extras and in order to utilize them I need 10.5 or 10.6. I don't want to upgrade to 10.6 and I'm not quite sure if I can.

To elaborate on William's point above about the software likely being pirated: Apple never, ever sells "downloadable" versions of its software. (Updates are provided via download, but full releases are available on DVD media only.) No reseller should be offering such a download for sale.
Plus, you cannot install a Mac OS onto a hard disk that is the boot drive for that computer. So if you downloaded a version of OS 10.5 onto your Tiger (10.4) computer, you could not run the installer. A running system can't upgrade itself. That's why you must have the software on DVD and boot from that DVD. (There are other ways--sharing DVDs across a wireless network or booting from an external drive.)
For now, call Apple sales (1 800 MY APPLE in the US) and purchase a legal, on-DVD copy of OS 10.5--they are still making and selling them.

Security Update 2009-006 crashed my Macbook 13" (Intel Core Duo)

Hi all,
After accepted the automatic updates proposed by the OS, I was soon invited to restart the machine.
No files were downloaded (Security Update 2009-006, Itunes and Safari updates as well)
After rebooting the macbook, a grey screen with the apple logo and the turning wheel is showing for 1 to 2 minutes..... and this is repeated forever between the classic chime start up.
I repaired permissions from my DVD OS X Leopard and nothing happens.
Could you pls help to solve this problem ?
Regards to all there,
Daniel - Patagonia Argentina

HI Daniel,
*"I repaired permissions from my DVD OS X Leopard and nothing happens."*
Not the same as making sure the startup disk is ok.
Boot from your install disk and check the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disk, try booting in Safe Mode
What is Safe Mode
Update your system software to 10.5.8 using the Combo update available here.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1058comboupdate .html
After updating to 10.5.8, run Sofware Update.
As with any software update(s), repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Scanner and intel core duo

Does anyone know if Minolta Dimage Scan Multi pro (firewire) will work on iMac intel? Minolta has recently given up his photography business and don't know if I can expect some software upgrade.

I don't like to push any brand of drivers that cost additional money.
Since the introduction of OS X, virtually all the scanners for OS 9 were left out in the cold.
I came across this option when I migrated to OS X and it works. I looked and it appears your unit is also supported.
There are ways to get around having to buy the full version(s).
I recently purchased the Professional version as it suits my home office requirements.
They are constantly updating the drivers.
VueScan
http://www.hamrick.com/vsm.html
iMac iNtel 20" & PB 1.6 15" both w/ 1.5 GB Ram(G4 Dual 450 RIP) Mac OS X (10.4.5)

Final Cut Pro HD 4.5 and Intel Core Duo

Hey there!
Not sure where else to post this, so here goes.....
I'm a total "newbie" and don't know SQUAT about anything but I'm trying to understand "video editing".
A copy of "Final Cut Pro HD" that is supposed to be "4.5" has come my way. Will this work on my iMac? Can I load it in without any problems? Should I even bother?
ANY and all info would be GREATLY appreciated!
Thank You!

The first version of FCP that was compatible with Intel processor Macs was version 5.1. The current version available is 6.0 (part of FCS 2).
FCP 5.0 and older (including version 4.5) was written for PPC processor Macs and are not compatible with the Intel processors in your iMac. If you can get it to install, it won't run properly.
-DH

MacBook and Intel Core 2 Duo?

Similar Messages

Maybe you are looking for