Macbook and laptop_mode.
I've just discovered laptop_mode, but it doesn't seem to work correctly.
$ laptop_mode auto
Laptop Mode Tools 1.34Laptop Mode Tools 1.34
On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set.
Laptop mode Checking if desired state is different from current state.
enabled, not active [unchanged]
Do I have to recompile kernel if I want to use it?
Is kernel26 no longer patched with appleir?
Last edited by Husio (2007-11-22 21:35:10)
Run that command without the AC power connected, unless you change the settings, laptop_mode will not be activated with the power cord connected to the computer (a good thing in my opinion).
Similar Messages
-
i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV. -
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
i have a macbook and am using outlook 2011 as email. receiving okay. sending okay sometimes. am now getting error message 4.7.0 not allowed when sending. what is the cause? how do I fix please?
I have discovered that the emails have in fact been sent but much later, maybe it's a network problem with the people i am sending it to. so i checked my sent items and they are there, but at the time the email doesn't go straight into the sent box or drafts so i'm assuming it's disappeared and type it again. i'll keep going with it, until someone can give me a possible solution or explanation as to what is happening.
-
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
Hello, Im new to this website. Im having issues with my Macbook. I have the old 2009 model Macbook and it is our schools macbook. The school just upgraded these MacBooks to OSX Mavericks and when i try to open Minecraft it won't let me. It says no jdk installed. I also try to install Java SE runtime but half way through the Software Update it says cant download software because of network problem but I'm connected to the internet and i can browse stuff just fine. Can any one help with my problems. P.S. I don't know the administrator password or stuff like that. And yes we are allowed to play games and stuff on these laptops but only at home not at school so don't tell me i need to focus on school and not games.
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
Problem with MacBook and TimeCapsule (with Workaround)
Hi,
thought it might be helpful to post my recent experience with my new MacBook (2,4GHz) and my *Time Capsule*.
I am using the Time Capsule as my main WLAN router and for backup. Reproducible, the MacBook (with OSX 10.5.6, all Airport updates applied; TimeCapsule with most recent firmware update 4.7.1) corrupts the TimeCapsule connection when waking up from sleep. Whenever the MacBook wakes up from sleep, it tries to (re-) connect to my wireless network. The airport sign in the menu bar changes from light grey bars to dark bars and the connection time counter appears next to it; but just a second later the counter disappears again, although the Airport signal bars are staying black. The result is that there's no wireless connectivity anymore; even the Airport admin software cannot find the TimeCapsule anymore. Furthermore, all other Macs (I have an additional iMac) loose there connections as well. Only thing that helps here is to restart the TimeCapsule (by disconnecting the power cord). After that, both MacBook and iMac can access the TimeCapsule again and everything works as normal.
This whole scenario can completely be reproduced and only happens when the MacBook tries to (re-) establish its Internet connection after wake-up from sleep. When I shut down the MacBook and boot normally, the MacBook connects without any problems.
After several hours of finding a solution, I've called Apple Support - and they told me that this is a *known bug*, but they currently have *no solution* for it. According to the Apple Support guy, I was not the first to report this problem (which was somehow a relief, but on the other hand a surprise as I haven't found similar problem descriptions on Mac forums yet), but they couldn't tell when and how the problem will be fixed. (Of course, they also recommended applying the most recent software updates (which I had) and resetting PRAM (which I did) - without any success.)
As now I got the impression that this is a bug with the current Late 2008 MacBook (it has a Broadcom BCM43xx based Airport Extreme Card) which I cannot solve myself, I looked at least for a workaround. I realised that this error doesn't occur when I turn Airport off before sending the MacBook to sleep, and activating it some safe time after waking up again. With the great resources at macosxhints.com, I found a small program called "Sleepwatcher" and a scripting addition called "XNetwork". Sleepwatcher runs as a demon in the background and can execute small tasks before a Mac goes to sleep and after it wakes up. XNetwork allows you to turn on and off Airport from within AppleScript (or the OpenScript Architecture). Now I use Sleepwatcher to turn off Airport just before my MacBook goes to sleep, and use it as well to (re-) activate Airport with a safe delay of 10 seconds after my MacBook wakes up again.
As of now, this works just fine (and as it should right out of the box...) - so I can wait more relaxed until Apple comes up with a real solution for this problem!
Sorry, this has become quite a long post - but maybe it is helpful for anyone.
Cheers,
MarkI believe this was the problem I was experiencing at first, but it is now worse!
TC works fine EXCEPT for the AirPort feature when also using AirPort on my MacBook (late 2008, Unibody).
At first it seemed random, but I can now reproduce the problem at will. The TC stops working and the light goes solid amber or even no light at all sometimes.
The scenario is the following:
TC works fine, I have an iBook G4 connected via ethernet and can surf the web; iPod touch (1st gen) can surf the web as well; everyone's happy. Turn on the MacBook with AirPort on, TC stops working; light goes amber or sometimes stays solid green (I configured it to flash on activity) or completely off. iBook and iPod can't surf the web. AirPort Utility does not even see the TC (hit Rescan many times, no luck). Restart TC by unplugging, waiting 20 seconds or so, plug it back, light is solid amber; AirPort Utility still does not see the TC. Repeat this a few times, waiting in between, no success. Turn off AirPort on the MacBook, unplug and plug the TC, it is now working in less than 30 seconds. iBook and iPod can surf the web; connect the MacBook via ethernet to the TC, everyone is still happy. Turn on AirPort on the MacBook, TC stops working. You get the picture. It has been 2 days now where I can reproduce this constantly.
I have an AirPort Express that I use to stream music, which extends the TC. My DSL modem/router is in bridge mode where the TC connects via PPPoE. My configuration has been the same for almost 2 years problem free. I reset the modem too but the above scenario still applies.
I did a hard reset of the TC by holding the reset button at the back until the light flashed amber rapidly. I re-entered all the configuration again, but still no luck.
I re-installed OS X 10.5.7, no luck. The firmware on the TC is 7.4.1 (74100.25). The AirPort card on the MacBook is listed as Broadcom BCM43xx 1.0 (5.10.38.35)
I set the log level to debug on the time capsule and entered the IP address of the iBook (which is connected via ethernet), but I could not find anything in the system.log or other logs via the Console application.
When the TC is working and I then turn on AirPort on the MacBook, this is the last entries from the logs on the TC:
Jun 11 20:20:12 Severity:5 Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
Jun 11 20:20:13 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60705.
Jun 11 20:20:14 Severity:5 Connection accepted from [fe80::20a:95ff:fea9:9426%bridge0]:60706.
Jun 11 20:29:01 Severity:5 Associated with station 00:23:6c:80:47:60
Jun 11 20:29:01 Severity:5 Installed unicast CCMP key for supplicant 00:23:6c:80:47:60
Jun 11 20:29:02 Severity:7 Public address reported as 67.55.21.207 to 192.168.1.16:5353
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32770 to 192.168.1.16:4500 with lifetime 3600
Jun 11 20:29:02 Severity:5 Binding added for udp, 67.55.21.207:32771 to 192.168.1.16:5353 with lifetime 3600
(Severity 5 is 'Notice', 7 is 'Debug')
I turned on AirPort on the MacBook at 20:29 and then nothing after those few lines; in this last case, the TC light was solid green but the iBook or iPod could not surf the web (it was flashing green with activity just before as I opened a web page on the iBook).
Still no solutions as of yet... -
I have a 2008 black MacBook and acess UK tv through a puchased proxy. I want to purchase a Sony Bravia internet connected tv and stream the site through a tv - Sony tell me this won't work - that a latest model tv cannot capture content and sites from a MacBook - is this true???? Surely there is a solution? Any help or advice welcome.
They are correct. The only stream you can wireless connect the TV to a Mac is through an AppleTV, and that's purchased content on iTunes, and your own homemade content that is H.264 MPEG-4 that is 1800kbps. Conversion of commercial video to that format is illegal, and hence how can not be stated on the forum. Alternatively, as long as the TV is HDMI, you can wired connect it to your MacBook using the same advice here:
https://discussions.apple.com/message/16531141#16531141 -
I have a macbook and want to watch netflix on my tv, but i don't have an hdmi connection on the tv, just RCA. I bought the mini-display port to VGA. What do i need to connect it to RCA input on my TV?
There is a VGA adapter to TV S-Video RCA Out Cable for PC Video.http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
-
When I connect my MacBook to my television using Apple TV the audio stays on the MacBook and doesn't transfer to the TV. How can I make it so I can hear the Movie or Video through my TV's speakers and not my MacBook's?
This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred -
New aluminum Macbook and S-Video
New aluminum Macbook and S-Video
It have come to the conclusion that the new MacBook's and MacBook Pro's can not output to S-video. I have tired the Apple Mini DisplayPort to DVI and then the Apple DVI to Video but no luck, the two do not connect as the Mini DisplayPort to DVI is missing 4 pin holes. I have tired Mini DisplayPort to VGA and then a VGA to s-video adapter but no luck, the MacBook did not even see a second display.
Is there any hope to achieve my goal? I need s-video out for work and will have to exchange the computer for a Black MacBook if the new computer can not output to s-video.
Any thoughts?*Mini Review - PC to Video EZ*
_*It works!*_
!http://farm4.static.flickr.com/3236/29803095101fb261f66ao.jpg!
I, and many others, have been looking for a way to output video (composite and s-video) from the NEW Macbooks and MacBook Pro's sporting the Mini DisplayPort since Apple as yet to release such adapter. I use my computer to output video (s-video) for digital slide shows and presentations. If our new aluminum MacBook could not meet this requirement back to the store it would go.
While searching the web for a adapter, converter or whatever could help get video out of the new MacBook I quickly learned ($10 later) that a simple VGA to s-video cable would not work.
!http://ecx.images-amazon.com/images/I/41fD46i4gVL.SS400.jpg!
*NO GOOD!*
I soon came across the PC to Video EZ. It is sold at several online retailers but I finaly decided to buy it from NewEgg.com (links at bottom of post). NewEgg is retailer I knew I could trust and get fast shipping from. I ordered the converter box on Friday and it arrived today (Monday) with standard shipping!
Bottom line, the PC to Video EZ from GrandTec outputs video (both composite and s-video) at equal quality to Apple's own video adapters used on previous (pre-DisplayPort) computers. I, owning a MacBook Pro with DVI to video adapter, could not tell the difference.
The device itself is small. It is nothing you would complain about carrying around and it gets the job done.
!http://farm4.static.flickr.com/3222/29803104503aa9314222o.jpg!
*PC to Video EZ from GrandTec*
!http://farm4.static.flickr.com/3169/2979454029c07766ce1bo.jpg!
*PC to Video EZ with new button-less Track Pad*
!http://farm4.static.flickr.com/3171/2979454137839fb19b1do.jpg!
*PC to Video EZ with new aluminum MacBook*
!http://farm4.static.flickr.com/3018/29794542513448691da0o.jpg!
*PC to Video EZ with new Mini DisplayPort to VGA adapter (still a required purchase)*
The back of the unit has two VGA ports, one in and one out. You can use the VGA out port as a pass through so you can still have your computer connected to a VGA monitor while outputting to video. A feature I will never use but it is still nice to have, especially for desktops.
Also on the back is the video ("yellow" composite) and s-video out.
!http://farm4.static.flickr.com/3150/2980310816fd29234965o.jpg!
Back
!http://farm4.static.flickr.com/3209/2980310910a387be2a8fo.jpg!
*Back with end of Mini DisplayPort to VGA adapter*
On the right side of the unit you will find a place to plug in the power adapter. Good news, its powered by USB. Bad news, the thing needs to be powered at all... More bad news, the unit does not use a standard USB cable. You better not loose the one that comes in the box! At least there are no power bricks to lug around and a simple USB to wall power adapter (like the one used with iPod or the iPhone) should also power the device. My testing showed that power is required.
!http://farm4.static.flickr.com/3162/2980311010daa3207621o.jpg!
*Power in. Why no USB A to USB B?*
!http://farm4.static.flickr.com/3032/2980309856563935f1c3o.jpg!
*USB power cable*
The unit comes with every cable you would need which is a huge plus! Included in the box is a short VGA cable (3 feet, which is perfect), a s-video cable and a composite video cable.
!http://farm4.static.flickr.com/3168/2979453321a01c534560o.jpg!
*Included cables. All you need to buy is the Mini DisplayPort to VGA adapter.*
Although not as neat as an Apple Mini DisplayPort to video adapter would be it does get the job done.
!http://farm4.static.flickr.com/3251/29794536291b56a7febdo.jpg!
!http://farm4.static.flickr.com/3051/2979453521fe14baa0b1o.jpg!
*Typical Setup*
!http://farm4.static.flickr.com/3061/29803103608b7b074438o.jpg!
*Final Product*
*The unit supports the following screen resolutions & refresh rates.*
* # 640x480@60/72/75/85Hz, 800x600@60/72/75/85Hz, 1024x768@60/75/85Hz and 1280x1024@60Hz. _On my SD TV I had luck with 1024x768@85Hz. Anything larger would not display._*
Pros:
* Power supplied from USB ~NO BULKY EXTERNAL POWER SUPPLY!
* No software required! (works with Mac or Windows or any OS!)
* Composite and S-Video outputs
* VGA IN and VGA OUT for simultaneous TV/monitor viewing
Cons:
* Requires power
* Does not use a standard USB cable
* Not as neat as an Apple Mini DisplayPort to video adapter would be
* You still need to buy the Apple Mini DisplayPort to VGA adapter
*Package Contents*
* PC to Video EZ
* User Guide
* Composite Video Cable
* S-Video Cable
* USB Power Cable
* VGA Cable
Links:
http://www.grandtec.com/products/video/untimateEZ.html
http://www.newegg.com/Product/Product.aspx?Item=N82E16815117101
I HOPE THIS HELPED MANY LOOKING FOR A SIMILAR SOLUTION. I KNOW IF I WOULD HAVE FOUND THIS POST I WOULD HAVE BEEN VERY, VERY HAPPY! PASS IT ON. -
I bought a DATAPILOT to transfer pictures to my macbook and can't get it to work. Any suggestions please?
Best if you try and explain what you are trying to acheive.
Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
There are tutorials here
http://www.apple.com/findouthow/photos/
Regards
TD -
My Apple TV all of a sudden refuses to show the movies from my MacBook and says it needs to set time network. What is that?
Welcome to the Apple Community.
The Apple TV should set it's time automatically from the network time server, if it isn't doing this try restarting the Apple TV by removing ALL the cables for a 30 seconds, if this fails try resetting or restoring it. -
I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne ConnellyThanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system): 1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision: 3AHB
Interconnect: ATAPI
Burn Support: Yes (AppleShipping Drive)
Cache: 2048KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne -
I want to have all my music on my iphone and macbook (and pc if possible) but when I try to synchronise I am told I will lose any music from my iphone which is not on my macbook (there is much more on my iphone than my macbooK). How do I keep all my downloaded and copied music and have it available on both machines (plus pc if possible)?
The music sync is one way only - computer to iphone. The exception is itunes purchases: Without syncing: File>Transfer Purcahses
The iphone will sync with only one copmptuer at a time. Sycning with another will erase the current content of the iphone and replace it with content from the new computer.
Maybe you are looking for
-
How do I do a split screen to show the contents of my Library and a playlist at the same time?
I'm using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4. I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so t
-
X-Fi ExtremeMusic driver found on every other reboot of the sys
Hi everyone, I just got my ExtremeMusic card along with a whole new computer by using E6600 + DS3 + 2GB RAM. But I had a problem: system can only recognize the driver on every other reboot. For example: on the odd # of the reboot, the system can dete
-
Satellite C660d-14G: network controller is not installed
Hi. I installed windows 7 on my toshiba, I have problem with the wireless driver. I downloaded all availible drivers on the site, but there is no change. In the device manager write that the network controller is not installed.
-
Dear All, When posting a JE in foreign currency (USD)for a BP, the client is getting an error "Invalid Currency" even though the account currency is set to "USD" in the Chart of Accounts. The corresponding contra account is set to 'Multi Currency".
-
How do I print a email chain in mac mail?
How do I print an meal chain in mac mail? How do I set it up, turn in on or off? I'm running Mac OS 10.9.5