MacBook and MacBook Pro Battery Update

http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to improve battery performance.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
Battery will not charge when computer is plugged into AC power.
Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.

For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Pretty nice change for those C2D's

Similar Messages

Airport, 10.5.8, and MacBook and MacBook Pros and slow internet

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
If you have Macbook or MacBook Pro, and have upgraded to 10.5.8, you may experience slower than normal airport connection due to a bug found in the original 10.5.8 installer. Apple has released this update for MacBooks and MacBook Pros to address the issue:
http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro
To amend what Apple has stated, the System Profiler will indicate you have one of these three MacBook/Pro CPUs:
o MacBook3,1
o MacBook4,1
o MacBookPro4,1
If you have certain third party routers the update above will not help. In which case, it is recommended that you contact the third party router manufacturer for a firmware update, and find out also if others have your exact same router, and have found a resolution with your issue.
Wireless issues can be caused by the following:
1. Interference on the same wireless channel.
2. Single channel connection from some third party routers not being strong enough to deal with interference. Apple Airport Express, Extreme, and Time capsule wireless routers all support dual channel connections, and also support networking with Windows as well as Mac.
3. Bad router tables in your router.
4. Power surges.
5. Interference from microwaves, or 2.4 Ghz non-cell wireless phones, whose signal is not tempered with channel hopping.
6. Distances less than 2 feet may have many overlapping wireless waves causing interference from the wireless router.
7. Distances greater than 150 feet from the wireless router.
8. Walls with numerous pipes, improper ground wiring, file cabinets with numerous papers between the computer and the router.
9. Run the hardware test that came with your computer, it may indicate an issue on the logicboard which could also impact your wireless card.
10. Improper security on your wireless connection. Setting up a WPA2 connection is preferred over WEP, which is preferred over no password.
11. 802.11n is a draft standard, meaning not all routers support it the same way.
12. Data corruption in the wireless cache settings, caused by improper system maintenance:
http://discussions.apple.com/thread.jspa?threadID=1772235
13. Migrating wireless settings with the Migration Assistant from a PowerPC to Intel Mac, or vice versa. It is better to follow these tips to avoid those problems:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
Not everyone will get this problem.
14. Apple Airport and Time Capsule firmware updates can be found on:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/
This is the 1st version of this tip. It was submitted on August 14, 2009 by a brody.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

"this tip ready for consideration"
Please put in:
http://discussions.apple.com/category.jspa?categoryID=140
http://discussions.apple.com/forum.jspa?forumID=1222
http://discussions.apple.com/category.jspa?categoryID=218
http://discussions.apple.com/category.jspa?categoryID=190
and any other forum or category you feel is appropriate.

Can't Connect MacBook and MacBook Pro at same time to AEBS

I can't connect a MacBook and MacBook Pro to an Airport Extreme Base Station at the same time. Whichever one connects first works and the other one doesn't. It was working fine for months and then stopped working. Can only use one computer at at time. There's nothing else on the network. It may have been a software update that caused the problem, but I'm not sure which one. Have done all software updates and am not using any security on the network, so that's not the problem. Many sleepless nights trying to get this fixed, so any help would be greatly appreciated!

bcassid
Do me a favor. So many users are experiencing this (no myself though) and I have suggested so many things with nothing constantly working. There are successes here and there, but nothing consistently solves the problem. However, try the following in Airport Utility and both Macs, and then let us know what happens.
*Can’t Access Certain Web Sites / DNS Server Settings Issues*
I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
Launch Airport Utility.
Select TC on left.
Click "Manual Setup".
Select "Internet" from the toolbar above.
What's listed for "DNS Server(s):"?
Try putting in these servers from OpenDNS
208.67.222.222
208.67.220.220
Click "Update".
Your TC will restart with the new settings.
Next, launch System Prefs --> Network Prefs.
Select the service you usually connect with on the left (Airport or Ethernet).
Then click, "Advance..."
Click the "DNS" tab.
What's listed for "DNS Server(s):"?
Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
Click "OK" then click "Apply".
Finally, reboot your Mac.
Now see if you have internet access all around.
Let us know if this resolves your issue.
Cheers!

Same power adapter for Macbook and Macbook Pro?

We have a new Macbook and Macbook Pro in the house and I was wondering if the power adapters were interchangeable. I noticed in the store there are two different adapters for sale, but the ones we have appear to be the same or similar. I feel almost certain we can use them with either computer.
Thanks for your help.

The 85 W MBP adapter can be used with both, the MB will only draw what it needs. The lower wattage MB adapter will not simultaneously power the MBP and charge its battery, but it won't do any harm.
Hope this helps...

MacBook and MacBook Pro competing for airwaves

Howdy,
I have an Airport Extreme set up as wireless router, i.e., the cable modem is plugged into the Extreme. Elsewhere in the house, an Airport Express is set up to extend the network. We have both a MacBook and a MacBook Pro, both running Leopard. When both laptops are accessing the web, it seems as though they were competing for the connection because the MacBook systematically gets slower connections, lags, and sometimes gets disconnected entirely.
Following some advice I found elsewhere in these forums, I downgraded the firmware of the Airport Extreme to 7.3.1. Here are its main settings:
- participate in a WDS network
- radio mode: 802.11n (b/g compatible)
- channel 11
- security: WPA/WPA2 Personal
- DHCP server distributes addresses between 10.0.1.2 and 10.0.1.200
Both the Extreme and the Express use the same channel. I tried changing it with no success.
Upgrading the firmware does not resolve the issue. The MacBook Pro is never disconnected; it always comes ahead of the MacBook. The two laptops are not dealt the same IP address, but somehow, there is a competition. When the MacBook Pro is turned off, say, and not accessing the web or anything else, the MacBook does not get disconnected.
Has anyone seen such a situation before? I might have misconfigured something.
Thank you in advance for any suggestions.
Dom

In a WDS setup, everyone uses the same channel (in your case 11).
If you can run an ethernet cable from the Airport Extreme to the Airport Express you can eliminate the WDS mode and instead configure your 2 base stations for WiFi Roaming, and you can put the Airport Express on a different channel (eg. Ch1).
The Airport Express gets its connection to the router via ethernet. The Express is configured into "Bridge Mode". The Express is given the exact same SSID as the Extreme. The Express is given the exact same password as the Extreme. The Express is set to a different channel (Channel 1 would be a good choice, unless your neighbors are using that, in which case you want to be at least 5 channels away from your Extreme and any neighboring base stations with strong signals).
This will give you a Roaming setup where as your move around the house, your MacBook and MacBook Pro will automatically switch between the strongest base station, but because everyone is using the same SSID and Password, you do not loose your connections.
And each base station is using its own channel.
If you do have neighbors with strong signals, you can use something like "AP Grapher", iStumbler, KisMac, MacStumbler, etc... to see your neighbors, the chanels they are using, and the relative WiFi signal strength so you can choose the channels with the least interference.
If you can not run an ethernet cable between the Extreme and the Express, but you really like the idea of a Roaming network, then you could look into PowerLine ethernet adaptors for getting an ethernet equivalent between the 2 base stations.

Apple MagSafe Airline Adapter for MacBook and MacBook Pro

Does the Apple MagSafe Airline Adapter for MacBook and MacBook Pro work in cars to in the cigerete lighter and how does it work on a airoplane cause in airoplanes there is only a mike connection thats about it ?

This is an alternative solution that works great for me. I always carry a small and lightweight DC to AC converter with me in my case when I'm on the road. It's a Wagan Tech Smart AC 100 USB that I picked up at Costco for under 20 bucks. 100 watt capability and allows me to use all my electronics and chargers on the road. I can use it to charge the cellphone, laptop, ipod, etc.
Even includes a USB port on the side for charging USB based products and also includes the aircraft adaptor (and of course a cigarette lighter adaptor) and everything fits into a small cloth bag (included).
http://www.wagan.com/htmls/detail-2382.html
The link is for the newer 120 watt version but it looks identical otherwise. If you don't have access to Costco then check the link provided for either direct purchase or the availability of other resellers. There's a "where to buy" tab at the top of the screen. Cheers!
P.S. I just noticed that you are from the U.K. I'm sure this will still work as your MacBook charger should autoswitch down to 110v input, you'll just need to make sure you have the North American plug installed. If not, I'm sure there are similiar DC to AC adaptors available in the U.K. Hope that helps!
Message was edited by: joudbren

Docking Station for the MacBook and MacBook Pro

Check it... I've been waiting for one of these. A bit pricey, but worth it. I'm so sick of the wire exchange every time I take the laptop somewhere...
http://www.gadgetgrid.com/2007/02/13/macbook-and-macbook-pro-docking-station/#mo re-108

Adam,
I saw your post and what you have sounds like what I am looking for. What is the cooling device that you have called? I want something I can plug everything into and leave it hooked up and then have one plug/cord into my computer. It sounds like what you did.
MacBook Mac OS X (10.4.9)

Power adapters for MacBook and MacBook Pro

Are Apple power adapter universal for MacBooks and MacBook Pro's manufactured over the past few years. I would like order a spare power adapter and I own three laptops all which have been purchased in the past three years. I have two MacBooks and one MacBook Pro.

Not sure what you are asking. The AC adaptors for MBs and MBPs are not the same. The former is rated at 65 watts and the latte is rated at 85 watts. The latter could be used with a MB or a MBP, but the former could not be used with a MBP. Both adaptors have the same MagSafe connector. They would work on any appropriate Intel model since 2006.

Internal Differences between MacBook and MacBook Pro?

I was wondering if anyone has concrete information on whether on not the un-coustomizable, internal workings of the MacBook and MacBook Pro are different, such as the motherboard, logic board, other interfaces, etc.
I have been talking with Apple reps and none have been able to give me a deffinate answer or written proof. Does anyone have info. supporting or refuting the statement that MacBooks and MacBook Pros are condigured/maunfactured with the same parts, aside from the Video Card?
Thanks

They are not the same; the disassembley pictures for both are here so you can compare for yourself
MacBook - http://www.ifixit.com/Guide/86.1.0.html
MacBook Pro - http://www.ifixit.com/Guide/85.1.0.html

Leopard on MacBook and MacBook Pro / running repair permissions

I upgraded both MacBook and MacBook Pro without major problems. I have been trying to repair permissions on the Mac Harddrive , and just get the spinning wheel. I have in the past run Onyx to perform routine maintenance tasks, but did not want to run any third party programs in relation to maintenance. Do I need to run it from the text tool disc? I never used to have to run it from disc.
Thanks.
Jon Pousette-Dart

I used Cocktail, Onyx, and YASU before Leopard, but had some problems with repairing disk permissions since upgrading to Leopard. Didn't know Cocktail had upgraded to Leopard. I'm impervious to snide remarks from self proclaimed experts.
We run a studio here north of NYC ( which is a standard ProTools HD Accel facility and won't touch Leopard for sometime) Leopard is on two laptops which seem to run good but slower since the Leopard upgrade. Might try the upgraded Cocktail.
As far as Beta Testors, That was the verbatim words out of level two Mac support. Their words not mine. Not one of the guys I talked to even planned on running Leopard on their own machines, as none of us in the pro community will either.
Having said that, it's on two of my laptops, just not the machines I run to do final mixes on.
Jon Pousette-Dart
www.pousette-dart.com

Macbook and Logic Pro Information

Folks, I currently own a 1.8 dual G5 and run the latest version of Logic Pro on it and it runs fine.
However, I'm looking to get a laptop in addition, to make the whole thing more mobile and was wondering whether I would be able to get the latest macbook (not Pro) and effectively run the latest version of Logic Pro on it? I'd be putting 2 Gig of Ram in it and have at least a 120 gig HD.
Has anyone tried this yet? Will the saving over getting a Macbook Pro be a false economy or would it be powerful enough to do it justice. Any pros, cons, dos and don'ts would be much appreciated.
Cheers all.

The processor in the MacBook and MacBook Pro is essentially the same with a slight edge in speed for the MB Pro, so you really shouldn't notice a difference. Where the MB and MB Pro differ substantially is in the graphics card-but that only becomes an issue with video editing and 3D apps.

Hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.

mangesh171 wrote:
my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
No.
Power Adapter/ cord wattage
“Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
http://support.apple.com/kb/HT2346
Best.

The new Macbooks and MacBook Pros - Firewire being phased out?

Hi,
Many thanks in advance for your attention.
With the latest release of MacBooks and MacBook Pros, does it seem to anyone else that Firewire is being phased out? Even the new iPod Touch's cannot be charged via a Firewire cable.
(The first iPod Touch has a Firewire/ USB compatible dock).
I am somewhat baffled as a year ago Firewire was all the rage for Video Editing. It had a better reputation for sustained transfer of data and not dropping frames.
(Critical with video editing).
Also - the several miniDV cameras I've owned, including my current model, all transfer their data into a computer via a Firewire port.
I have three External Drives at the moment (mostly for Video Editing) and all work with either Firewire 400 or 800 (or both). None have a USB 2.0 port.
The new MacBooks don't even have a Firewire port.
The new 15" MacBook Pro has only a port for Firewire 800.
Anyone else have any thoughts on this?
Should I begin shifting my external drives to USB 2.0 connectivity?
Even though USB 2.0's reputation for transferring Video is not very good?
- Ross

Ross Corsair wrote:
I am somewhat baffled as a year ago Firewire was all the rage for Video Editing. It had a better reputation for sustained transfer of data and not dropping frames.
(Critical with video editing).
When importing video from FireWire-based camcorders, the video is sent in real time to the computer, which is why FireWire is necessary. That's because FireWire-based devices use tape to record video (DV or HDV), which cannot be accessed in the same way as memory cards or hard drives (the camcorder can't rewind during capture).
With USB-based camcorders, this is no longer an issue, as the video is stored and transferred as a file, rather than a real-time stream.
Also - the several miniDV cameras I've owned, including my current model, all transfer their data into a computer via a Firewire port.
FireWire-based camcorders won't work with the new MacBooks (you won't be able to import your video without using another computer).
The new 15" MacBook Pro has only a port for Firewire 800.
And an ExpressCard slot, which can be used to add additional FireWire or eSATA ports if necessary.

Macbook and Macbook Pros crashing in certain wifi areas?

Hi all,
I have friends who's Macbooks and Macbook Pros (Snow Leopard 10.6.x) crash as soon as they enter into certain wifi hot spots. They attend the University of Lethbridge. They always crash when their airport cards connect to the guest wifi connection at the school. I thought it was just lack of maintenance but it's not. I was looking at MBP's that came right out of the box. This is common to all macbooks from about 2009 and up. I have yet to try out the MBP's with thunderbolt but so far many of them are giving the grey screen of death.
Some people also get random signal dropouts when they are in residence.
I'm on a macbook 2006 10.5.8 and have never had any problems.
Any suggestions on how I can help them out?

Upgrade to 10.6.7. Most likely they are running afoul of a bug where the Mac can KP if certain MCS rates are turned off.

Macbook Pro Battery Update 1.2 Issues

Just installed the Battery Update 1.2 on my Macbook Pro and now when running off the battery, the system automatically shuts down when it reaches 35%. What kind of an update is this?
I didn't have any battery issues prior to installing the update, and simply updated thinking that maybe it might give me more battery life, and as it was official software, it would be rather innocuous - I was wrong.
Is there a way to reverting the software to its original state?
The battery has a cycle count of 89.

Calibrating MacBook Pro batteries...
PowerBook G4 (15-inch Double-Layer SD), MacBook (all models), MacBook Pro (all models), and MacBook Pro (17-inch) (all models)
The battery calibration for the PowerBook G4 (15-inch Double-Layer SD) and any model of MacBook or MacBook Pro has been updated because of a new battery released with this computer. With these computers, follow these steps to calibrate your battery:
Plug in the power adapter and fully charge your PowerBook's battery until the light ring or LED on the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
Allow the battery to rest in the fully charged state for at least two hours. You may use your computer during this time as long as the adapter is plugged in.
Disconnect the power adapter with the computer still on and start running the computer off battery power. You may use your computer during this time. When your battery gets low, you will see the low battery warning dialog on the screen.
Continue to keep your computer on until it goes to sleep. Save all your work and close all applications when the battery gets very low, before the computer goes to sleep.
Turn off the computer or allow it to sleep for five hours or more.
Connect the power adapter and leave it connected until the battery is fully charged again.
Tip: When the battery reaches "empty", the computer is forced into sleep mode. The battery actually keeps back a reserve beyond "empty", to maintain the computer in sleep for a period of time. Once the battery is truly exhausted, the computer is forced to shut down. At this point, with the safe sleep function introduced in the PowerBook G4 (15-inch Double-Layer SD) computers, the computer's memory contents have been saved to the hard drive. When power is restored, the computer returns itself to its pre-sleep state using the safe sleep image on the hard drive.

MacBook and MacBook Pro Battery Update

Similar Messages

Maybe you are looking for