MacBook and Pro Design

I have a MB and I love it. However, maybe someone can tell me why Apple doesn't include a memory card reader and why do the USB ports have to be right next to each other? Sometimes there isn't room for two devices. Why not space them or put them on opposite sides of the MB as the Pro version does? Or, what about one more USB port (total of 3) on the opposite side?

I think it's simply because of the "commercial target". Even if macbook is a really good computer device and can perfectly be used for professional works, it was more designed for entertainment if you see what i mean (so it was targetted for an occasional use of the usb ports). The MacBook pro was designed for professional work (daily use of the usb port, memory card reader etc..). But i can be wrong, it's just my opinion.
I don't care about the 2 USB ports next to eachother, but there's no memory card reader for my camera but it's not a big deal, for 20 bucks you can buy one. Moreover, the card reader often come with the camera when you buy one.
I hope it was what you were looking for, and i hope i'm not wrong.

Similar Messages

  • MacBook and Pro Apps

    I am considering the purchase of one of the brand new MacBooks that were released today and I am wondering if Pro Apps like Aperture and Final Cut run well on the MacBook? Is the Intel Graphics card alright to run those programs? How about Photoshop and Flash?
    Also, I would like to know someones thoughts on the MacBook display. Is it nice and bright? Clear?
    I have also heard that the MacBook gets noisy when viewing sites such as youtube or other flash sites? Is this true?

    Aperture 1.5 ran very well on my 2.0GHz Core Duo MacBook while I was using it. In the end, I was forced to move my 57GB Aperture library to my iMac, I couldn't afford the hard drive space on my portable. It should run just fine on one of the new MacBooks. Neither Color nor Motion will run at all on the MacBooks. They require a different video card. While DVD Studio Pro, SoundTrack Pro and Final Cut Pro will run on a MacBook, keep in mind that Apple does not support it. You won't be able to go to them for any technical help and the folks here might not be able to offer suggestions since they're not experienced with the same hardware.
    -Doug

  • Difference between MacBook and Pro?

    Hi there. Just a quick question...
    I looked at the MacBook for the first time today (rather than the MacBook Pro) and saw I could get the same spec for less. The only difference I could see was the screen size. I'm sure there's more to it. Can someone explain? Thanks

    Other than the obvious screen size difference, the other major difference is the video chipset. The MacBook uses an "integrated" Intel GMA 950 with 64MB of shared videom memory, while the MacBook Pro uses an ATI Radeon x1600 Mobility with 128MB or 256MB of dedicated video memory. This translates to much better performance in games and thing that make heavy use of the graphics card.
    To me, this is the only real difference, and if it weren't for that, I would own one right now. As it stands, though, I need to do a little more thinking about whether I'm ok with essentially giving up the option of playing graphic-intensive games in XP. I'm not a huge gamer now, so it might not bother me much, but the idea (for me) was to get a MB/P as a desktop replacement, and in case I want to play games in the future I'll need to go back to the desktop...

  • MacBook and Pro Tools

    I just ordered a black macbook with a 1gig ram in it and i was wondering if thats enough to run protools with at 192kbs. Also, has anyone run into any problems/mishaps with the program?

    I am having very much problems to run protools with one rewire track, one rtas track with albino 3 and 2 audio tracks (mono). Protools is giving me DAE errors and the processors go to the limits, audio is stoped and mi buffer is 1024 and the porcessors are at 85%...
    It´s a nightmare...and nobody can say me nothing... no at apple... no at digidesign...
    I am starting to think that change my old windows pc with amd 64 for the mac osx was my very great error...

  • I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Deve

    Hi,
    I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
    Thanks,
    sheapps28

    You'll need a Mac with a support OS X and tools to complete the process.

  • Macbook pro retina for web and UI Design

    HI, I am planing to buy a Macbook pro retina 15 inch late 2013 model. I am a UI Designer and mostly I am gonna use Photoshop CC or CS. So I am planing to get either rMBP 15' $1999 model which has i7 2.0 RAM 8GB and intel iris graphic card or rMBP 15' $2599 model which has i7 2.3 RAM 16GB and has dedicated graphic card NVIDIA GeForce GT 750M with 2GB of GDDR5 memory. I dont know which one will work for me as a Photoshop user, I am working on a big files over 15MB with lots of layers in it. I dont want to spend extra $600 and get the same result as $1999 will give me so if you have any experience with macbook and photoshop please help. Thanks in advance

    The new rMBP are not user upgradable. You are stuck with what you buy.
    If you can afford it I would get the most I could, you will not be dissappointed. RAM is the best bang for your buck.

  • Lion designed for MacBooks and iMacs, not Mac Pros?

    Seems to me that most of the major features of Lion only benefit folks using trackpads, which means mainly MacBook and iMac users. If you're a mouse-user all that built-in swiping and tapping is useless. To some degree, the same is true with Air Drop,great if you're mobile, but not so necessary otherwise. So, since I do 95% of my serious computer work on a Mac Pro, I see no benefit in upgrading to Lion. The only features that seem relevant are some of the lesser touted features like auto-save and maybe Mission Control, although that seems a bit meh to me.
    Anyone care to tell me why I should invest $29 in this alleged upgrade?

    Nostatic1
    I upgraded, had a look and then decided to go back to Snow Leopard. Lion was a bit buggy for a start, but like you I have a Mac Pro, and do a lot of design type work, not as a profession though. Auto save worries me, as I want full control over when I save when designing stuff. To have to go back through lots of saved versions to get to the one I want to keep would seem to me to just be creating more work for me. As I understand it, it only works in apps that are adapted to use it, so my old CS3 would not do it, but that direction worries me if I don't have control over it.
    A lot of the new features can be switched off if you don't like them, which is what I did, so why upgrade? The new iCal and Address Book are horrendous looking too!!! Gaudy is the term that comes to mind. So is the full screen version of Photo Booth. Those types of apps look OK on the iPhone, but look horribly out of place on a Mac, where they have already taken all the colour out of the program window borders to leave a pale grey. I couldn't bear to look at them, and had to replace those bits of the apps with graphics of my own.
    My advice is not to do anything for at least a while. It seems that an awful lot of posts in this forum are people wanting to know how to alter Apple's defaults and to switch things off. I am hoping Apple is watching and taking notice.
    It seems to me that Apple has taken the success of the iPhone and iPad as its inspiration to change the Mac. I have an iPhone and I find the apps like address book that reopen where you closed them a pain. Usually I don't want that same person again, and I have to navigate back to my groups, then out again to get to the right person. It would be much simpler to always start at groups. I cannot imagine doing serious design work with my finger on an iPad. The two should remain separate entities.
    This is the first upgrade that I have reverted from in 18 years as a Mac user, and the first time I am really getting worried that Apple is going off in the wrong direction - and the first time that Steve Jobs is not at the helm. I don't have a good feeling for the future.

  • MacBook and MacBook Pro Battery Update

    http://www.apple.com/support/macbook_macbookpro/batteryupdate/
    Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to improve battery performance.
    The battery update is available immediately via Software Update or downloadable here.
    Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
    This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
    If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
    For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
    Identifying an affected battery
    Affected batteries will have one or more of the following symptoms:
    Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
    Battery will not charge when computer is plugged into AC power.
    Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
    Battery pack is visibly deformed.
    Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
    Next Steps
    To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
    If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
    This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.

    For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
    Pretty nice change for those C2D's

  • My external hard drive is not recognized on my new MacBook Pro, even though it is recognized on my older MacBook and other computers. Help?

    Please help me find a solution to my new MacBook Pro not recognizing my hard drives. Yes, thats two hard drives I have that don't seem to work on this computer but both work on my older MacBook and many other computers.

    It is formatted for both PC and Mac
    I have tried finding it in Disk Utility, no dice...
    Tried both USB Ports
    And a reboot is still unsuccessful..

  • Airport, 10.5.8, and MacBook and MacBook Pros and slow internet

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    If you have Macbook or MacBook Pro, and have upgraded to 10.5.8, you may experience slower than normal airport connection due to a bug found in the original 10.5.8 installer. Apple has released this update for MacBooks and MacBook Pros to address the issue:
    http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro
    To amend what Apple has stated, the System Profiler will indicate you have one of these three MacBook/Pro CPUs:
    o MacBook3,1
    o MacBook4,1
    o MacBookPro4,1
    If you have certain third party routers the update above will not help. In which case, it is recommended that you contact the third party router manufacturer for a firmware update, and find out also if others have your exact same router, and have found a resolution with your issue.
    Wireless issues can be caused by the following:
    1. Interference on the same wireless channel.
    2. Single channel connection from some third party routers not being strong enough to deal with interference. Apple Airport Express, Extreme, and Time capsule wireless routers all support dual channel connections, and also support networking with Windows as well as Mac.
    3. Bad router tables in your router.
    4. Power surges.
    5. Interference from microwaves, or 2.4 Ghz non-cell wireless phones, whose signal is not tempered with channel hopping.
    6. Distances less than 2 feet may have many overlapping wireless waves causing interference from the wireless router.
    7. Distances greater than 150 feet from the wireless router.
    8. Walls with numerous pipes, improper ground wiring, file cabinets with numerous papers between the computer and the router.
    9. Run the hardware test that came with your computer, it may indicate an issue on the logicboard which could also impact your wireless card.
    10. Improper security on your wireless connection. Setting up a WPA2 connection is preferred over WEP, which is preferred over no password.
    11. 802.11n is a draft standard, meaning not all routers support it the same way.
    12. Data corruption in the wireless cache settings, caused by improper system maintenance:
    http://discussions.apple.com/thread.jspa?threadID=1772235
    13. Migrating wireless settings with the Migration Assistant from a PowerPC to Intel Mac, or vice versa. It is better to follow these tips to avoid those problems:
    http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
    Not everyone will get this problem.
    14. Apple Airport and Time Capsule firmware updates can be found on:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/
    This is the 1st version of this tip. It was submitted on August 14, 2009 by a brody.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    "this tip ready for consideration"
    Please put in:
    http://discussions.apple.com/category.jspa?categoryID=140
    http://discussions.apple.com/forum.jspa?forumID=1222
    http://discussions.apple.com/category.jspa?categoryID=218
    http://discussions.apple.com/category.jspa?categoryID=190
    and any other forum or category you feel is appropriate.

  • For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
    If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
    1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
    2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
    3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
    Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

  • Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    I currently have a 2009 Macbook and am wanting to upgrade to a new Macbook Pro.  I have upgraded my hard drive in the macbook to a 500gb and have a duel boot with Windows 7 installed with Boot Camp along with other software that I do not want to lose.  Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    A much better solution is to hook your two Mac together and the first time you start the new Mac and it asks if you wish to recover data from another Mac, answer yes. This will invoke Setup Assitant which will do the job for you but intelligently.
    I know because I just used Setup Assitant. It worked like  a charm.
    Allan

  • Macbook and Macbook Pro Power Adapters

    Is it safe to use a Macbook Pro power adapter in a Macbook and vice versa?
    I have just noticed that the MBP's adapter is 85 watts and the MB's is 60 watts. I hadn't realised they were different.
    My wife and I share each others adapters all the time (she has a Macbook). Will this be damaging either of the laptops?

    Shouldn't cause any problems. The main issue will be that the 60w adapter won't provide enough juice to both charge the MBP battery and run it if there is much of a load so I'd avoid using the 60w on the MBP for anything other than charging the battery whilst not using the machine - sudden power shortage could be painful for the machine.
    Best of luck.

  • MacBook and MacBook Pro competing for airwaves

    Howdy,
    I have an Airport Extreme set up as wireless router, i.e., the cable modem is plugged into the Extreme. Elsewhere in the house, an Airport Express is set up to extend the network. We have both a MacBook and a MacBook Pro, both running Leopard. When both laptops are accessing the web, it seems as though they were competing for the connection because the MacBook systematically gets slower connections, lags, and sometimes gets disconnected entirely.
    Following some advice I found elsewhere in these forums, I downgraded the firmware of the Airport Extreme to 7.3.1. Here are its main settings:
    - participate in a WDS network
    - radio mode: 802.11n (b/g compatible)
    - channel 11
    - security: WPA/WPA2 Personal
    - DHCP server distributes addresses between 10.0.1.2 and 10.0.1.200
    Both the Extreme and the Express use the same channel. I tried changing it with no success.
    Upgrading the firmware does not resolve the issue. The MacBook Pro is never disconnected; it always comes ahead of the MacBook. The two laptops are not dealt the same IP address, but somehow, there is a competition. When the MacBook Pro is turned off, say, and not accessing the web or anything else, the MacBook does not get disconnected.
    Has anyone seen such a situation before? I might have misconfigured something.
    Thank you in advance for any suggestions.
    Dom

    In a WDS setup, everyone uses the same channel (in your case 11).
    If you can run an ethernet cable from the Airport Extreme to the Airport Express you can eliminate the WDS mode and instead configure your 2 base stations for WiFi Roaming, and you can put the Airport Express on a different channel (eg. Ch1).
    The Airport Express gets its connection to the router via ethernet. The Express is configured into "Bridge Mode". The Express is given the exact same SSID as the Extreme. The Express is given the exact same password as the Extreme. The Express is set to a different channel (Channel 1 would be a good choice, unless your neighbors are using that, in which case you want to be at least 5 channels away from your Extreme and any neighboring base stations with strong signals).
    This will give you a Roaming setup where as your move around the house, your MacBook and MacBook Pro will automatically switch between the strongest base station, but because everyone is using the same SSID and Password, you do not loose your connections.
    And each base station is using its own channel.
    If you do have neighbors with strong signals, you can use something like "AP Grapher", iStumbler, KisMac, MacStumbler, etc... to see your neighbors, the chanels they are using, and the relative WiFi signal strength so you can choose the channels with the least interference.
    If you can not run an ethernet cable between the Extreme and the Express, but you really like the idea of a Roaming network, then you could look into PowerLine ethernet adaptors for getting an ethernet equivalent between the 2 base stations.

  • MacBook and MacBook Pro with 10.6:  Wireless Airport Issues with Cisco

    Long Story but please bear with me:
    Loaded SL on my daughters MacBook and my MacBook Pro. Internet worked flawlessly at our house (WEP encrypted) and on other public wifi. When my daughter went back to her sorority house at college 24 hours later, she could not access the internet using the sorority house network (Cisco Aironet 1800 router and Cisco Airo Access Points).
    Her Airport on the MacBook appeared connected at full strength yet no internet. Two calls to Apple support (they were very nice) did not help. All the following were tried:
    1. Reset PRAM
    2. Deleted Airport and Safari plists
    3. Edited locations
    4. Removed Battery
    5. Others I cannot now remember
    Still no net. However, she could 'pirate' and hop on line with other identified public wifi adjacent to the sorority house. I drove to the sorority house today and tried to get on the network wirelessly using my MacBook Pro with SL. Same identical results to hers. Another MacBook without SL works great and gets right on the network.
    Is this some SL influenced issue with the Airport card and the Cisco system? Weird that both of our laptops work great with several other wifi networks but not the one at the sorority house.
    Could much of what we all our seeing with the internet access problem lie not with issues within our software or computers but with the routers and access points not being compatible? I have very little understanding of this stuff (as you all can probably tell) but the Apple Support people acted like it was a old firmware issue with Cisco and not with SL. Not actually what I wanted to hear.
    Any ideas or suggestions?

    Your description there, particularly the last part, sounds like my problem. At home, we connect using Airport and ADSL which was OK, once SL had sorted out passwords.
    At my office, where there are two wifi systems, I could not get on either, although did have IP numbers on both. The link to the outside world is via a proxy which uses a PAC file. Network Diagnostics reported each time (whatever I did) that the link to the server was OK, but the Internet was not.
    I created a new Location with identical settings (typing them in and not copying) and the only visible difference is that the new location has no DNS numbers -- I had not noticed that before. The moment I pressed, Apply, the computer was online.
    I was guessing that there was a conflict in a .plist file somewhere; but now I wonder if DNS might have been the reason (the DNS number usually used is the one from the router itself).

Maybe you are looking for