Macbook battery, and replacement, won't charge

I have an early 2008 white macbook. The battery recently stopped charging. The icon on the menubar  reads, "Condition: Replace Now." I installed a new battery and also bought a new mag adapter powercord. Still no luck. The computer runs if the powercord is plugged in - but not on the batter. Thoughts?

Thanks. Took it in to the local Apple reseller. The problem was a bad "new" battery that didn't fit. Watch out for "Newertechnology" NuPower batteries. Got mine from OWC. Put out the extra cash for an Apple battery and, what do you know, it worked. That's what I get for cheaping out. Guess there's some wisdom in the cliche, you get what you pay for.

Similar Messages

  • Macbook Battery Recognised, But Won't Charge

    Hi, purchased my macbook April '06, and it's just started mis-behaving. When switched on, the adapter light is green, there is a plug in the battery icon to indicate it's running off the mains. Clicking on the battery displays the percentage charge, however, this doesn't increase. The battery has 174 cycles on it and I have tried resetting the SMC as described in the apple support pages, to no avail. Has anyone else encountered this problem or am i going to be forking out for a new battery? (I have the latest updates including the battery update)

    Thanks for the .

  • My battery was recently replaced and still won't charge

    I recently had my battery replaced at the PC Store in my University, he had it working and plugged into his computer. It charged perfectly fine. When I took the iPhone home and plugged it in to charge, it was doing the same thing before the replacement battery.
    It is an iPhone 4S and simply won't charge. It goes straight to the full charged icon. I have tried multiple cords and plugged it into my computer and the wall outlet. I am wondering if something is up with the cord I tried first and it some how short circuited a part of the battery. When he had it plugged in on the new battery, it worked perfectly fine but then for me the program continued. Any suggestions?
    I had recently updated to the current IOS but the issue was happening before the update as well. I checked the pins on both the iPhone and the charging cord and they seem to be in tact. ZERO water damage when he opened up the phone. To quote his comment "It looks better than iPhone's I know for a FACT had no whatever damage at all".
    At a loss for what the problem could be. Numerous restores and restarts have done nothing.
    - Sulley

    Take it back and ask them to make it right.
    If you didn't have the battery replacement done by Apple, they won't touch it now.
    Sorry. If whoever replaced the battery for you won't or can't fix it, then you will need to find a competent repair shop or buy a new phone.

  • I've Just Replaced My Macbook Battery And The Turning Screw You Twist With A Penny Has Came Of What Do I Do

    I've Just Replaced My Macbook Battery And The Turning Screw You Twist With A Penny Has Came Of What Do I Do

    Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

  • Why doesn't my phone charge? I changed the battery, now it won't charge at all and it's almost dead.. Any suggestions on how to fix it?

    Why doesn't my phone charge? I changed the battery, now it won't charge... Any suggestions on how to fix it?

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

  • My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

    My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

    If you are seeing a Red LED, you may have a faulty MagSafe Adapter.
    I remember reading that the orange light is produced by a combination of a Red and Green LED. If that's the case, It seems that the adapter isn't lighting the green LED properly at that time.
    I would suggest you seek service with your nearest Genius Bar (Apple Retail Store) or Apple Authorised Service Provider as they have access to diagnostics which may assist in isolating any hardware issues you may be experiencing.
    Cheers.

  • I fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

    i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

    turnbui wrote:
    i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
    It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
    Pete

  • My iphone 4 suddenly blank, i thought it is out of battery and put on a charger, but in few minutes later my iphone turns to be too hot on the right half side of its body. i pull off the charger. whats the problem is this?

    my iphone 4 suddenly blank, i thought it is out of battery and put on a charger, but in few minutes later my iphone turns to be too hot on the right half side of its body. i pull off the charger. whats the problem is this?
    the next day i tried to connet with itunes on pc, but its undetectable. what should i do? i think i will need to delete notes, pivtures and video recordec by the iphone itself but how to do this since the phone cant be on at all. lease help me. its only 7moths old since i buy it

    i try to reset but nothing happened. & my warranty had end bcause i bought thru small dealer with a month's shop warranty only. due to problem of getting hot of the iphone's right side body, is it may cause of battery problem? how much will it cost to solve/repair this kind of problem?
    thank you for ur help earlier

  • I bought a second hand MacBook Air and it won't allow me to install updates as up pops the previous owners log in details. How do I go about amending this?

    I bought a second hand MacBook Air and it won't allow me to install updates as up pops the previous owners log in details. How do I go about amending this?

    The seller was remiss in not properly preparing the Mac for sale. That task has now fallen to you. You will encounter continual problems until you perform the following. Ignore references to DVD since the MacBook Air has none.
    If you are unable to do that contact the seller and request instructions, or arrange for its return and a refund of your costs.
    Refer to What to do before selling or giving away your Mac
    If you enabled FileVault, disable it in System Preferences > Security & Privacy.
    "Deauthorize" your iTunes account. Same for Audible if you have one.
    System Preferences > iCloud > de-select "Back to My Mac" and "Find my Mac".
    Sign out of iCloud. Select "Delete from Mac" when it appears.
    Next: Remove all your personal information by completely erasing the Mac's internal storage.
    If your Mac shipped with a grey System Install DVD, start your Mac with that disc inserted in the optical drive while holding the c key to boot from it instead of its internal volume, which should be erased before selling it.
    If your Mac did not ship with discs, boot OS X Internet Recovery:
    using three fingers press and hold the following keys: ⌘(command), option, and R.
    With a fourth finger press the power button to turn on the Mac.
    Keep the other three fingers where they are until you see the "spinning globe" icon.
    This method forces the Mac to download its originally installed OS from Apple's servers, which will not require an Apple ID to install.
    Remove any Open Firmware password if you created one: select Firmware Password Utility from the Utilities menu and remove it.
    Select Disk Utility from the Utilities menu.
    Remove any partitions you may have created.
    Select the Mac's hard disk icon, then select the "Erase" tab.
    Select the "Security Options" button and erase the disk.
    The more "securely" you erase the disk, the longer it will take.
    The fastest method is sufficient since all but the most expensive techniques and equipment will be able to recover securely erased data.
    When it finishes, quit Disk Utility.
    Select Install Mac OS X from the Utilities menu.
    An Apple ID will not be required. If a prompt for an Apple ID appears, return to Step 5.
    Do not create any user accounts.
    When it finishes, shut down the computer.
    If you want to install the bundled apps that were included with your Mac, restart by using your Applications DVD if one was included, and install the bundled apps. Apps bundled with newer Macs that shipped without discs cannot be transferred. Its new owner must purchase them from the Mac App Store using his or her own Apple ID.
    If the Mac is being sold to someone outside the family consider the following additional information:
    System Install DVDs that came with your Mac should remain with it forever, and must be included with the sale.
    Consider including your AppleCare certificate if you bought it, printed documentation, even the box if you still have it. AppleCare stays with the equipment and is transferable.
    Execute a bill of sale showing the Mac's serial number.
    Once no longer in your possession, remove the Mac from your devices in My Support Profile.

  • Does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?

    does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?
    i had it work on my second gen mba but now it wont work

    Hi David
    I meant to say 5.1 the problem I've got is it's saying it does support ppc software but I have got the intel version but for some reason won't install from disc but if I transfer from time-machine backup it works
    But then it won't read my project it's so strange just don't get it 

  • Updated to latest operating system on MacBook Pro and now won't let me drag files onto a flash drive.

    Updated to latest operating system OS X Mavericks on MacBook Pro and now won't let me drag files onto a flash drive.

    The Flash Disk must be NTSF formatted. Writing to NTFS requires 3rd party drivers (Tuxera, Paragon). Reading from NTFS however does not require these. So install NTFS drivers, or format the drive in FAT32 from Disk Utility.
    Hope this helps :-)

  • I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync.  Is there any way to repair?

    I have a iPhone 3GS and the power connection prongs are damaged and it won't charge or sync.  Is there any way to repair?  Or, at least is there a way to charge so I can write down phone numbers and othe rinformation.  My power charge is totally out right now.

    If it will not turn on - you have zero chance of getting anything off the phone.

  • Migrating info from old Macbook Pro to new  Macbook Pro and old laptop loses charge midway and transferring stops.  After recharging how do I get things going again?

    Migrating info from old Macbook Pro to new Macbook Pro and original laptop loses charge midway thru.  After charging again how do I get things going, do I start from the beginning? 

    Agreed. Don't even think about starting a long, disc-intensive process like that without both machines powered by AC.

  • I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router.  For more information on Time Machine, check these Web pages:
    Time Machine FAQs
    Time Machine Troubleshooting

  • My ipod freezes when i connect it to my computer and it won't charge!

    When I connect my Ipod to my computer it goes to the charging screen with the battery, but it is not charging. Then about an hour later it goes to the "Do not Disconnect" screen. I look up in the corner of the screen at the battery and it is not charging, like the screen before it. Also when the "Do Not Disconnet" screen is on I go to I tunes and my ipod is not reconized by it.
      Windows XP  

    First try the steps here http://docs.info.apple.com/article.html?artnum=93716

Maybe you are looking for

  • Urgent--==creation of object type in MASSOBJ transaction

    hi all: Could any one urgently tell me how to create object type in Massobj transaction.(this is done to delete purchase requisition in bulk in transaction 'Mass' (AND not in 'MASSOBJ').) i have created in Massobj transaction by pressing 'new enterie

  • Sync trouble or me?

    Hi. I'm not sure why my address book isn't syncing with my .Mac address book. I've seemingly done everything- hit sync in the System Prefs- so that it will sync the address book. It says it is successful. Then I go to my address book on .Mac website

  • Displaying BOM With Sub Boms

    I want to display the bill of material within its component's sub boms as well in one page as a view of hiearchy..How to do so? Can anyone explain?

  • Cisco NM-IPS-K9 running 7.0

    I am running a Cisco NM-IPS-K9 on a Cisco 3845 with version 7.0(5)E4.  I need to find the following information: 1.  How do you tell what version of SNMP the module is using? 2.  How do you configure SSH session time-out values on SSH session with th

  • Buying Hebrew/Arabic

    Do I have to buy a special Middle East version of CS6 to use InDesign with Hebrew or Arabic (so these languages are entered right-to-left)? If so, WHERE can I buy CS5 or CS6 using a student ID? Trying to find this out through Adobe support has led no