Macbook Camera No Longer Working Since Upgrading To 10.5

I have just upgraded to 10.5 and have now discovered that my built in camera is no longer recognised by Photobooth,iChat or other third party applications such as Funbooth and iRecord. The error that I am getting is that there is no camera attached.
I know this can not be a hardware issue as I had been using the camera on Tiger 10.4.11 before I upgraded. I would appreciate any assistance in finding a fix for this issue.

You should zap your PRAM. That usually solves these kinds of hardware problems.
From the manual:
Shut down your computer. Turn the computer back on and immediately hold down Command-Option-P-R, continuing to press until you hear the startup sound for the second time. This resets the computer’s parameter random-access memory (PRAM).
IMPORTANT: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

Similar Messages

ISight camera no longer working since updating to 10.6.6

Ever since I updated, the built in camera no longer works on my Mac.
When I use iChat or Photo Booth I get the following message: "There is no connected Camera"
Help!

Hi,
Welcome to the  Discussions
Try this http://support.apple.com/kb/HT3964
At the bottom are three "links" (They actually expand) Use the one for your Mac type.
8:39 PM Thursday; March 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Front Facing Camera Refuses To Work Since Upgrade To Ios7

Since I have upgraded to ios 7, for what ever reason my front facing camera will not work. Regardless of this been tried on the camera App or Facetime. When I switch to it, it just blurs the screen and hangs. Nothing else happens. Is anyone else having this same problem since upgrading? And if so has anyone got a solution to this?
Many Thanks
Luke.

hello all,
I can confirm the same behaviour with an iPhone 4S, white, 64GB. We own 3 iPhone 4S in our family. 2 of them work flawlessly after the update to iOS7. The only visible difference is the white colour. With the white iPhone 4S we cannot use the front camera any longer. The camera app freezes, switch back to the rear side camera only works, after removing the camera app from the multitasking pane. Reinstalling with iTunes or via DFU mode or via settings-general-reset-contents&settings didn't help. A staff member of an Apple retail shop tried again, but again without success. We both agreed that it must be a software issue. All apps using the front camera (Facetime, Tango, Skype Camera+ etc.) do not work.
The front camera worked well before upgrading to iOS 7.
But 2 other iPhone 4S working without a problem even with the identical iOS 7 leads me to the question if Apple used different camera modells or even different suppliers for the front camera for production of the iPhone 4S. My only explanation from an engineering point of view is that there were different cameras used in production and one of it now has a problem to connect correctly to the iOS 7, which indicates in this case a driver problem.
2 possible solutions:
wait until Apple releases a new version of the iOS which hopefully also covers this problem.
let the front camera replace in a repair shop which will cost between 49 and 69 EUR (this morning I have investigated into some Internet shops offering this service)
Cheers, Claus

[SOLVED] Openbox autostart no longer working since upgrade

After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
[2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
[2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
[2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
[2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
[2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
[2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
[2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
[2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
[2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
[2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
[2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
[2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
[2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
Not sure what's going on or what could have caused it. My .xinitrc looks like this:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
export BROWSER="chromium"
# Start GNOME Keyring
eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
# You probably need to do this too:
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export GNOME_KEYRING_CONTROL
export GNOME_KEYRING_PID
exec openbox-session
My .zprofile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
My systemd startup service:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Getty on %I
Documentation=man:agetty(8) man:systemd-getty-generator(8)
Documentation=http://0pointer.de/blog/projects/serial-console.html
After=systemd-user-sessions.service plymouth-quit-wait.service
After=rc-local.service
# If additional gettys are spawned during boot then we should make
# sure that this is synchronized before getty.target, even though
# getty.target didn't actually pull it in.
Before=getty.target
IgnoreOnIsolate=yes
# On systems without virtual consoles, don't start any getty. (Note
# that serial gettys are covered by [email protected], not this
# unit
ConditionPathExists=/dev/tty0
[Service]
# the VT is cleared by TTYVTDisallocate
ExecStart=-/sbin/agetty -a dodo3773 %I 38400
Type=simple
#Restart=always
#RestartSec=0
UtmpIdentifier=%I
TTYPath=/dev/%I
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
KillMode=process
IgnoreSIGPIPE=no
# Unset locale for the console getty since the console has problems
# displaying some internationalized messages.
Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
# Some login implementations ignore SIGTERM, so we send SIGHUP
# instead, to ensure that login terminates cleanly.
KillSignal=SIGHUP
[Install]
WantedBy=getty.target
Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
setversion 1.4 failed
Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
Openbox-Debug: Moving to desktop 1
Openbox-Debug: not managing override redirect window 0x4000bb
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
kupfer: Reading from stdin
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Openbox-Debug: Caught signal 22. Ignoring.
Openbox-Debug: UPDATE DESKTOP NAMES
Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
Id=1
Timestamp=Fri 2013-05-17 10:25:53 PDT
TimestampMonotonic=13650783
DefaultControlGroup=systemd:/user/1000.user/1.session
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=405
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=1368811547544203
IdleSinceHintMonotonic=7545641
Name=dodo3773
Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
Last edited by dodo3773 (2013-05-19 06:34:44)

WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself. What does that look like?
Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
xfce4-panel &
numlockx &
keepassx -lock &
kupfer --no-splash &
~/Documents/Scripts/startupopen.sh &
sleep 30 && sudo /usr/bin/ntpd -qg &
sudo /usr/sbin/ethtool -K eth0 rx off &
~/Documents/Scripts/conky.sh &
sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
startupopen.sh
#! /bin/bash
sleep 13
chromium &
thunderbird &
sleep 20
devilspie -a &
sleep 7
pkill devilspie &
exit
temp_throttlenew
#!/bin/bash
# temp_throttle.sh max_temp
# USE CELSIUS TEMPERATURES.
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root" 1>&2
exit 1
fi
#if [ $# -ne 1 ]; then
# If temperature wasn't given, then print a message and exit.
# echo "Please supply a maximum desired temperature in Celsius." 1>&2
# echo "For example: ${0} 60" 1>&2
# exit 2
#else
#Set the first argument as the maximum desired temperature.
MAX_TEMP=85
#fi
# The frequency will increase when low temperature is reached.
let LOW_TEMP=$MAX_TEMP-5
CORES=$(nproc) # Get number of CPU cores.
echo -e "Number of CPU cores detected: $CORES\n"
# Temperatures internally are calculated to the thousandth.
MAX_TEMP=${MAX_TEMP}000
LOW_TEMP=${LOW_TEMP}000
# FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
# CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
let CURRENT_FREQ=1
function set_freq {
echo ${FREQ_LIST[$1]}
cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
function throttle {
if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
let CURRENT_FREQ+=1
echo -n "throttle "
set_freq $CURRENT_FREQ
fi
function unthrottle {
if [ $CURRENT_FREQ -ne 0 ]; then
let CURRENT_FREQ-=1
echo -n "unthrottle "
set_freq $CURRENT_FREQ
fi
function get_temp {
# Get the system temperature.
# If one of these doesn't work, the try uncommenting another.
TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
#TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
#TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
while true; do
get_temp
if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
throttle
elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
unthrottle
fi
sleep 3
done
Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is.

Emoji no longer works since upgrading to iOS7.

I'm having a weird problem ever since I upgraded to iOS7. For some reason, my emoji no longer works. It works parially. When I hit the globe on the keyboard, I can see them all and choose which one I want to send, but I can no longer type ":)" to get a smiley face and so on. When I do, it'll actually send ":)". I also can't receive any from others when they type ":)". These are the same people I've always communicated with. It worked used to work just fine. This is happening on my 4s and my iPad 2 ever since I upgraded them to ios7. I tried removing the keyboard from the settings and rebooting the phone, then readding the keyboard. No dice.
It's very annoying to have to switch keyboards everytime I wanna send something as simple as a smiley face. If anyone has any idea how to solve this, it'd be much appreciated.

The ":)" to has never been a feature in iOS unless you use Mavericks and/or a keyboard shortcut for changing between emoji on the iPhone.

Iphone 4 S Camera no longer works after upgrade IOS 7

Recently upgraded to IOS 7 and my camera does not work properly anymore.
Any hint?

Let's see. close out of the built in camera app, double tap the home button and completely close out of it.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
One of my co-workers said she can't use the purchase camera app also, she just update to 7.0.2 iphone 4S.
So the issue might be with the app.

Why does Remote App no longer work since upgrading to IOS 6?

Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac. I have tried both homesharing and "add an itunes library" and both have failed. I have been through all the posted support articles with no success. By the way, I can still use my first generation IPAD to connect with no problems.

I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac.
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

Numbers no longer working since upgrade

I have a 09 version of iwork and since I upgraded to Mavericks I can't use it. Within a few seconds of opening it as soon as I try to type something it freezes and I have to quit from the dock.
I have deleted the spreadsheets I was using and tried to open a new one but same happens on new one. I have tried deleting numbers from my app folder to reinstall but it won't let me. Help!!

As was stated in another thread:
"Both versions can be on your Mac at the same time, and can run at the same time."
I upgraded to Mavericks, and upgraded the applicaitons, when I was still on my nerly 5-year-old Macbook Pro. I quickly discovered I didn't like Numbers 3.0, so i reverted to Numbers 2.3.
Now i have upgraded to a Late-2013 Retina 15" Macbook Pro, with native Mavericks, and Numbers 2.3 crashes immediately when I try to open it, even after trying deleting the .plist file(s). The versions of Pages and Keynote from the iWork '09 package also do this, crash instantly.
Does anyone know if the older iWork Apps are *supposed* to work on this machine?

NAC CAM HA not working since upgrade to 4.8

Hi,
I have just upgraded my two NAC CAM servers to 4.8. They were previously running on 4.6. They are configured with eth0 on one LAN (fully routed), and eth1 and eth2 sitting on totally private LANs, each with a small /30 subnet to use. These are just a couple of small VLANs between two 4848 switches. It's basically configured as:
Server -- Switch -- Portchannel group -- Switch -- Server. Other VLANs also traverse the link and are fine. Portchannel is up and happily passing traffic. The VLANs appear active too (they are simply layer 2 VLANs - no routing or anything. Literally point to point).
I followed the upgrade instructions as per the release notes. However, since they have been unable to see eachother for HA. Pings between the HA interfaces produce no reply. I have found if I run tcpdump on one server, and fire a ping at it from the other, a ARP will arrive asking who has the IP, and it will reply, but it goes no further. Nothing has changed on the network side, so I'm a little flummoxed now.
Consequentially, one box will load up happily, the second will always tell me:
[root@xxxxxxxx bin]# ./fostate.sh
My node is dead, peer node is unknown
The 'working' node will show:
[root@xxxxxxxx bin]# ./fostate.sh
My node is active, peer node is dead
Ifconfig shows the interfaces as up - they can ping themselves after all.
Any help most gratefully received!

Hi:
I have an iPhone 3G (16GB) that I upgraded a couple weeks ago with the iOS 4.0 and although I haven't had any problems with those applications that I use regularly, I have not tried out the ones I don't use regularly. The problem I've been experiencing is that when I use the start button on the front to boot up, the slider to unlock won't move--I have to use the top edge button to boot up and slide/unlock. Even then, sometimes the application icons won't respond and I have to start all over again. Anyone else have this irritating deficiency?
Medren

The built-in camera doesn't work since upgrade to osx mountain lion

macbook air late 2010

I have the same issue. I did a clean install of ML and my camera is not recognized on any application. I have a Macbook Late 2008. Any help will be appreciated. Thanks!

IPhone Photo Sync No Longer Works Since Upgrading to Aperture 3

I updated Aperture to 3 and now for some reason I am unable to sync my albums with neither my iPhone or my AppleTv. I get a, "your iphone can not be synced. An unknown error has occurred (-50)".
I used to be able to pick and choose which projects and albums would sync to both of these devices, it is no longer giving me that option. The two choices when you choose aperture in the iTunes drop down are "All Photos and Albums" or "Selected Albums" however "Selected Albums" is greyed out.
What is going on?

I too have problems syncing with my iPhone since updating to Aperture 3 and subsequently 3.0.1. The problem clearly is with Aperture as I cannot access the Aperture library from iPhoto either. The ability to select individual projects or albums is greyed out and a full sync of the entire library results in an error -50.in iTunes. I have lodged 2 bug reports from both iTunes and Aperture but no word from Apple. *+Come on Apple.+* this make Aperture look really bad. I have resorted to syncing from iPhoto, a real step backwards but as Apple don't think it important enough to respond to their customers what recourse is left. I know! a well placed email to the media alerting them to the fact that Apples new version of Aperture is flawed.

Optical drive on MacBook Pro has stopped working since upgrade to Mavericks

I upgraded to Mac OSX 10.9 almost as soon as it was released, but I only discovered two days ago that any optical disk: CD/movie DVD, DL DVD etc that I insert in to my late 2008 MacBook Pro just spins up for a few seconds, then gets ejected.
I really hope Apple have noticed this issue, because there are many other people reporting the same problem. I will have to consider reverting to Snow Leopard if a fix is not released soon.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Caps lock light no longer works since upgrade

Mavericks appears to work just fine but... the caps lock light no longer functions on my mid 2012 MBP sine I installed Mavericks. Any had the same issue?

The caps lock light is entirely hardware-controlled, so you probably have a minor hardware issue with the keyboard. Any correlation with instaling Mavericks is purely coincidental.

My mobile hotspot no longer works since I upgraded to mountain lion. What happened and how do I get it back?

My mobile hotspot (Samsung Note II) no longer works since I upgraded to mountain lion (running on MacBook Pro) What happened and how do I get it back? "
Keep getting error message:
"Could not join “NAME-HOTSPOT”.
A connection timeout occurred"
Please someone help me with this - I do a lot of travelling and use my hotspot!
Thanks

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wrieless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

HP Truevision HD web cam no longer working with Skype since windows 8.1 update

Hi guys,
A major annoying problem as occured since i updated to windows 8.1 my web cam no longer works in skype, it works for everything elese youcam etc just not skpye, audio is working fine too. When i go into settings the programmes freezes and eventually crashes, I can see my webcam listed in skype but thats it, the bottom half of the pane is missing too it cuts out in the middle of clear history, rolled back the driver and it works but messes everything else up. Please help i am ripping my hair out..... thank you

odizzle7,
Welcome to the HP Forum.
Skype does run on Windows 8.1, although you may need to update Skype to at least version 6.16.0.105
If you have more issues, please do consider opening a New Post of your own.
This Thread is from last year and is not monitored by our Experts team.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Macbook Camera No Longer Working Since Upgrading To 10.5

Similar Messages

Maybe you are looking for