Macbook can't connect to internet any longer

I have a Verizon router but all of a sudden I can no longer connect to the internet. Every time I try to connect to the internet it tells me the connection has timed out. I tried the Network Setup Assistant, but it tells me my password is invalid, even though I am positive it's correct. Any suggestions?

Maybe a call to Verizon? SOunds like it may be on their end
LN

Similar Messages

  • MacBook can't connect to internet.

    Help!
    Hi guys,
    I'm currently unable to connect to the internet via LAN cable on my MacBook though I have used it successfully in the past.
    Normally I use wifi to connect to the internet with my MacBook and have had no problem. I'm currently giving the machine to my father whose residence does not have Wifi so I must use a LAN cable.
    Previously I have connected to LAN and the system has connected to the internet for me automatically.
    Having used Network preferences I've had no success.
    I know this post is a bit vague. Any help would be appreciated as I'd like to give this MacBook to my father to use. Thank you.

    Hi, Thank you, Sorry about that. I closed an old question about my iPad and just clicked post new comment, I don't use forums much and didn't realize it would post to this particular area. My mistake. Do you think I should repost the question to the other section?
    The LAN line works on the PC laptop I have here and I am able to get all the router and LAN line information from it (IP address etc.) so I know the signal is active from the router.
    When attached to the Macbook it says the cable is not connected.
    However when I go into Applications - Utilities - Network Utility and click on info, it displays the ethernet and the Hardware address, and model. I can only assume that some communication from the hardware to the device occurred to place that information in my system as I didn't put it in manually.
    any suggestions are greatly appreciated.

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

    If I'm connected in wifi with my Macbook, can I share the internet with Iphone? Thanks

    If you are asking about the Internet Sharing feature on the Mac, the answer would be that this option is not available for normal wireless, but it might work for BlueTooth.  Might be worth a try that way.
    However, if the Mac had an Ethernet Internet connection, then you could create your own "private" wireless network to allow wireless devices to connect.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • Can't connect to Internet after sleep mode

    Hi,
    Most times after put my iBook in sleep mode and reopen it, I can't connect to Internet. I use a normal cable connection by ethernet, but at these times, when I check the network status, it says I don't have any cable connected. The modem apears to be OK, with the computer's light on. I plug off and plug in the cable and it doesn't change and it happens the same when I click in DHCP renew - it just doesn't give any IP adreess. I need to restart the computer to get the connection again.
    Ibook G3 700   Mac OS X (10.4.7)  

    I am trying other solutions today.
    It can not change to another wifi network without switch off the wifi.
    That's mean I have switch off and re-open the wifi signal every time when it show like this capture.
    I waiting for more than 5 mins and it will search another wifi network automatically but it still "No internet connect".
    My MacBook Pro is no any WiFi issues.

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Can't connect to internet on my old g4 flat screen, network + airport ok

    I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

    Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
    If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
    If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

  • 5 out of 6 devices can't connect to Internet

    Just to preface,  this was all working hours ago.
    airport express,  Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
    my Samsung Galaxy s3 has no problems however.
    normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
    Any ideas would be greatly appreciated.

    You want the device that is directly connected to the modem to furnish the PPPoE service.
    This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
    But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
    Open AirPort Utility - Click Manual Setup
    Click the Internet icon
    Your settings should look like this:
    Connect Using = PPPoE   
    Account Name = Your user name with your ISP
    Password = Your password with the ISP
    Verify Password
    Service Name.....leave this area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings and the TC will restart
    Either delete the PPPoE connection on your Mac, or if  you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
    If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
    Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
    Wait a moment or two, then start the modem and let it urn for a moment by itself
    Start the TC and wait for a green light
    Then start each device one at a time until the network is back up

  • Airport card working but can't connect to internet

    hi all,
    airport card (just plain airport card) is working and is connected to a verizon fios router. signal very strong. just can't connect to internet via safari, camino or firefox. running 10.3.9 os. i've rebooted twice to no avail.
    altho, i can connect on my g4 powerbook using the same router.
    why isn't the g4 flat panel imac connecting? any ideas?

    In the Network system preference panel, is the wireless component
    selected and in the list of items in the configuration the Mac sees?
    You can drag the item(s) into preferred order of use, if there is more
    than one, ie: dialup modem, ethernet connection, airport base.
    If both computers have a similar operating system, it may be an
    idea to look carefully into each, and not change anything in the
    one which appears to work correctly; to look for differences.
    Does the wireless router provide support for 802.11/b as well
    as wi-fi 802.11/g? The older airport card runs on the older spec.

  • Since I installed Lion I can´t make Backups on my airy 1 TB Disc....there is always standing "Bachup wird vorbereitet (Backup is being prepared)"...I also can not play Sims 3 any longer...what should I do?

    Since I installed Lion I can´t make Backups on my airy 1 TB Disc....there is always standing "Bachup wird vorbereitet (Backup is being prepared)"...I also can not play Sims 3 any longer...what should I do?
    I have a Macbook Pro 13" late 2009.
    Greets iToby

    The first backup after updating will take quite a while.  See #D1 in  Time Machine - Troubleshooting.

  • I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

    I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • WRT54G can''t connect to internet or 192.168.1.1

    My router used to work. I updated the firmware to 4.21. xx and after that I can't connect to internet.
    When I connect directly to modem, I can go to the internet . I power recycled etc but when I connect to the router, it says limited connectivity.  It shows autoconfigurtion ip:169.254.251.135
    I don't know why this is so.
    I don't have the setup cd disk but I read the users' guide and it seems that I really don;t  need the cd. But no matter what I do , I can't get to 192.168.1.1 .
    Do I need a setup cd and where I can download?
    Any help is appreciated.
    Thanks ,
    Sankar

    Do the 30/30/30 Hard Reset and then check the IP address on that computer. For the reset steps do the following:
    The following procedure will clear out the NVRAM and set Router back to default values:
    With the unit powered on, press and hold the reset button on back of unit for 30 seconds
    Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    Plug the unit back in STILL holding the reset button a final 30 seconds....
    If still you are getting same IP address then try to reduce the LAN card speed. Here is the step:
    START--> right-click My Network Places and click Properties
    right-click on the device and click properties
    Click on the CONFIGURE button
    Select the ADVANCED tab and the settings you can alter are listed on the left.

  • Full coverage with 3G Coverage can't connect to internet

    Full bar with 3G COVERAGE can't connect to Internet. This goes the same with personal hotspot and the internet browser and apps that required internet. After reset by pressing the "on/off button" + "home" button , "RESET ALL NETWORK" , or even restarting the phones , after sometimes of normal operations it's back to the same cycle.
    I'm using iPhone 5s with iOS 7.1.
    Anyone have any solutions?
    Thank you.

    Hi,
    If the router isn't in guarantee,the RESET Button is electric contact maker,if you dont do that before,dont do it - open router,see on the plate where are weld a  reset button's pins,set the contact between them and hold for a 30-40 may be a minute,and it should go to reseting.But if you dont do that before,dont do it and now.
    In the resset button have 2 wafers,if they are oxidated,they cant doing a el.contact.
    Good Luck!!!!
    Thanks
    Kind Regards
    ing.George Gochev
    DSL and Telecommunications Engineer

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

Maybe you are looking for

  • What can I do--5 yr. MacBook Pro will not boot up?

    What can I do get my MacBook Pro to boot up?

  • Refresh, Refresh, Refresh.......

    Hi, Yesterday I installed os x mavericks. After solving a few small problems, I still have one very annoying All windows flashing every few seconds. Refresh. Refresh. Refresh. Does anyone know what to do with it?

  • Intel mini with crt

    when connected to a crt monitor, does it give murky/blurry image or pale colors like the g4 mini did?

  • Iphone 4s movies not playing outside iphoto

    Hoping someone could please assist.  I cant seem to play movies uploaded from my iphone 4s anywhere other than in iphoto. Quicktime is the default player and pops up and works in iphoto, but when I try to view the same file via finder, Quickplayer wo

  • Call abap method in a javaScript Function

    Hi all, I want call a abap method via a javaScript function in a view of a bsp application. Does someone know how it works? regards Alex