MacBook can't see network that iPhone can

Hope someone can help!
I'm posting this from my iPhone while on holiday. I brought along an old Airport Express (b/g) and connected it to the hotel's Ethernet port. I had set up the Express before leaving home to Create a wireless network and to connect to the Internet by DHCP.
My father's MacBook isn't able to see the network I have created, but it can see several other networks which must be from nearby buildings or rooms. My iPhone can only see my network, and I was able to log in and pay for Internet access.
Unfortunately my dad's MacBook doesn't even have the correct version of airport utility installed, must have migrated the PowerPC version when migrating to the MacBook by mistake. I can't get it to even manually connect to the network by entering the name manually. It keeps giving me a connection timeout error message.
I tried to disconnect the Ethernet cable from the Airport Express to plug the MacBook in directly but the system wants payment again! Presumably it charges per Ethernet MAC address.
My guess is there is network interference from so many close networks, but I can't understand why my iPhone works perfectly well. And I can't get into the airport utility to change channels as there is no airport utility for iPhone!
Any suggestions gratefully received.
Min Yu

Try restarting the router and the MacBook.

Similar Messages

  • Macbook Air cannot see Wifi but iPhone, iPad, and boot camp Widnows can

    I just started living in an apartment with a shared wifi router. I have no control over this router and i'm fine with that since I'm just with my girlfriend here and don't have a lot of other uses for it other than simply downloading stuff and using a computer.
    The problem is that literally every device I have (iPad, iPhone) can see and connect to the wireless network.  Oddly, my Macbook Air 2013 cannot see this network.  Some days I am actually able to connect and it works fine but then it'll just disappear and I cannot find it again.  I have bootcamp installed on the Macbook Air and when I switch to Windows I can see the network and can connect with no problems.
    I don't understand why the Mac OS side of things fails to even see the network when this is one of the devices with probably the most powerful network card considering it's 2013 and even has the ability to connect to ac wireless signals.
    Any suggestions? I would prefer to use my Mac OS side of things rather than Windows due to battery life at least, among other obvious things.

    I FIXED IT!!!!
    I reset my airport express (for the umpteenth time) but this time I did a manual setup instead of going through the assistant.  Changed the Channel to 10 (I am surrounded by other wifi networks using 1 and 11, so I just picked anything but 1 or 11) and configured it for 802.11g only (it defaults to b/g on the setup assistant). 
    So far, no problems, and both MBA and MBP connect.
    I would guess this has started to happen recently due to one or both of
    - recent Lion updates
    - additional wifi networks popping up in my apartment building causing some kind of interference
    That's my layman conclusion anyway.
    Thanks for all your help!  I feel like a heavy weight has been lifted off my shoulders.

  • Airport doesn't see networks

    hello,
    I am working on an iBook G3 running OSX10.3.9 and recently (september) added an airport card to my computer. everything was working fine until mid-january when airport stopped seeing networks - that is, it is turned on and set to see networks automatically, however, even when I am in places where there is a network (and where I have connected in the past), I am getting no bars (all of the bars for the airport icon are grey). I had my airport card tested and was assured that it is working fine - it was suggested to me that this might be a result of the software being compromised? I have just finished re-downloading and installing OSX10.3.9 but with no success - with respect to airport, everything is the same (all grey bars, no networks listed). I am very frustrated and need to be able to connect wirelessly again - please help!
    iBook (G3)   Mac OS X (10.3.9)  

    I'm hardly an expert, but I think I might have solved a somewhat similar problem.
    Network Preference's Default setting stopped working. Each time I turned on my iBook I would have grey menu bars and have to go to InternetConnect in Applications to select a network, although I only had one, and my TCP/IP settings had not changed (Have you checked yours?).
    Pulling plugs, zapping the PRAM, etc. did not work. What finally did, was going to HD/Library/Preferences/SystemConfiguration/com.apple.airportpreferences.plist and trashing that one .plist file.
    After restarting, I got right on. Don't know if this will work for any of you, but it is easy to try, and I don't think can do any harm.
    G3   Mac OS X (10.3.9)  

  • I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    for starters this is not the forum for notebooks or for that matter icloud or iphone.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/iphone

  • I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

    Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
    The only thing different is I just moved, but I have the same router/phone/internet provider.
    I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
    The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
    My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
    Thanks!

    If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

  • Can see files on Mac Mini from Macbook Aire on same network

    I can see the MacMini in the side bar from the Air but when I click through i can only see the public folders.  I have File Sharing checked in the System Preferences so I dont understand why i cannot see the files on the mini.  I can only see the drop box in the public folders and it wont even allow me to access that even if i wanted to.
    Is there something else other than check file sharing in system preferences that I need to do
    Also, I have an external drive attached to the MacMini which is not visible from the Macbook Air, not sure if that is the same problem
    Thanks for any advice you can offer
    Andrew

    Note that there's a difference between sharing and syncing.
    Sharing will allow you to access the files on your Mini from your MBP, but the files won't be on your MBP when you take it somewhere else.
    Syncing is making both Macs have identical copies of files, so that a change on one Mac makes a change on the other Mac.
    If you've got a large LightRoom catalogue and limited space on your MBP, then you want sharing. The link above should get you started with that.
    For syncing, I recommend BitTorrent Sync, which is free. It's basically "DropBox without the cloud". You select a folder to sync, and then whenever your two Macs are on the same network, any file in that folder that changes is synced to the other Mac.
    I use it to keep my entire Documents folder synced between my Mini and MBP.
    http://www.bittorrent.com/sync
    You may need to be careful about modifying the same document on both computers at the same time, though I believe BS does handle this in some way. Also, if you're syncing an app's data library, then some database files (e.g. with computer-specific data like file path names) may not sync well.
    Of course, you could use DropBox, though you'll need to subscribe if you want more than a couple of GB.

  • I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?

    I just bought my first MacBook Pro a few days ago. I can't seem to get my PC to see my MacBook Pro on the network. Can anyone help me get my PC to see my MacBook Pro on my network t?
    Thanks,
    Alex

    Forgot Your Account Password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.

  • Macbook can find every network except my own (iPhone,PC and other device can)

    I used to have long hair, but now it's short from me trying to wrap my head around this problem..
    My new Macbook Pro have decided to ignore my router and it's driving me nuts!
    My iPhone 3gs, PC, Xbox360, 3DS, Printer and Wii are all connected to the router.
    The Macbook Pro could earlier connect, but than it suddenly decided that no matter what name, visable or non-visable, password protection or no passward-at-all, or any setting at the router I can possebly try, nothing works, every device EXEPT the bloody fricking Macbook can find and connect.
    I hade a friend over to have him try with his own Macbook Pro, AND IT FRICKING finds,connects and the whole deal...
    What is wrong with my Macbook and what should I do to fix it?
    PS. It connects to the network i have set up at both my mother, father and friends... It ONLY ignores my own home router, that it has been connected to most before.... 
    In dire need of advice
    // MacbookPro user

    hmm....
    I seem to have solved it by deleating my saved networkkeys, deleating com.apple.softwareupdate.plsit, restarted router and laptop after every action I tried and finaly connect to another randome unknown open network close to my bulding, And like magic my router name suddenly appeard in the network list....
    Somehow I don't feel satisfied with this "solution".... -.-"
    Well, when the problem returns, I will return... ^^"
    Thanks For all the help

  • I have a new Macbook Pro. It won't join the wireless networks that my old Macbook Pro joined; only some of them (I'm talking open networks). What can I do, please?

    I have a new Macbook Pro. It can see, but won't join the open wireless networks that my existing Macbook Pro joins. What can I do, please?

    Mac OS X 10.7 Help: Troubleshoot a network printer

  • MacBook can't see wifi network

    Hi there,
    Please help! I'm setting up a wireless network and my macbook can't see the wireless network.
    The bizarre thing is that my friend's macbook sees it and connects with no problem. My macbook sees other wireless networks, but not mine! What's going on?!
    I have done the following
    - checked that it's turned on. (turned airport off, and back on, and restarted the computer)
    - checked that the router is broadcasting the SSID
    - checked the network name and password are correctly entered.
    - tried entering the name/pwd directly into the "preferred networks" setting of the Network Preferences pane
    what else could I do? I'm at a loss.
    Please help.
    thanks!

    Solved my own problem.
    Although the wifi router was set to broadcast the SSID (and only one of my macs could see it), I changed the settings so it was NOT broadcasting the SSID, then plugged the appropriate settings into the System Preferences pane, and it worked.
    crazy. but it works.

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

    I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

    If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
    Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
    What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
    iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
    The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
    http://support.apple.com/kb/ht1766
    Don't worry! Everything should be back to normal if you follow these steps.

Maybe you are looking for

  • No matter what I do, I cannot figure out how to refresh the screen, and so I can't even see what's new on my own website!

    I cannot refresh the screen, no matter what I try. The "restore" is not the same thing. So I always get old versions of websites, including my own. I cannot see a new version of any website I have visited previously. I need to know how to REFRESH my

  • Data Modeller DML Generator messed up

    Hi. I've been workling with Oracle Data Modelle5r 3.0.0.665 and I found that the DML Generator adds objects that have not been requested to generate as well as omits objects that are requiere to generate. The DML in the Physical Model Generator and t

  • Video TC problems in 9.1

    Dears all, i get a problem only in 9.1. It's simple : I have a video with tc burned in. I perfect match frame rate etc. But : the film is not matching the logic session. Example : Measure 10 -> tc 02:00:00:20 ( tc on video and Logic perfect ) Moving

  • Help please - template problems

    2 questions please - actually: 1.  Dreamweaver CS4... I think my template functionality has somehow become corrupted.  When I try to create new templates (regardless of which site I'm trying it within), they look ok.  But when I then try to create a

  • How to logon twice from same browsersession

    Consider following: We have 2 WebApps configured in 1 Enterprise Application and secured with 'Basic Authentication' on our WAS3.5.6 When a user tries to access WebApp1, automatically he is asked for a userid/passord and can opt to keep this on his s