Macbook causes Linksys wireless router to crash

My daughters Macbook causes the Linksys wireless router to crash. I've already loaded the latest Linksys firmware but it did not help. It's the only computer that causes the router to crash. I have used several other non-Apple systems on the network without any problems.
I think it's something that the Macbook is transmitting out but haven't pinpointed what it is and how to fix it.
Any ideas on how to get her Macbook to work on our network wirelessly?

Welcome to the discussions!
What you are asking is if the Linksys can broadcast a wireless signal to the AirPort Extreme and then have the AirPort Extreme connect to the G4 using ethernet.
The short answer is "no". For more details, please read on.
This is not possible because the ethernet ports are not active on the AirPort Extreme in this type of configuration. The ethernet ports on the AirPort Extreme would only be active if the device were configured to "extend a wireless network".
But, the AirPort Extreme can only "extend a wireless network" from another Apple device as it is not compatible with the products of other manufacturers for this purpose.

Similar Messages

  • Connecting a cable modem, a linksys wireless router and my MacBook?????

    So... My cable modem and MacBook work great when connected with an ethernet cable. How the heck do I hook up and configure my Linksys wireless router with my macbook and the cable modem? This seems like a simple setup, but when I hook it up it doesn't connect me to the internet.
    Any help would be awesome!!!!

    Darren,
    The best advice I can give is to suggest you post in the right discussion group. This is the group for Apple Pages. You want the MacBook group.
    -Dennis

  • Linksys Wireless Router: WRT54G Version: 2

    I was just curious, since I have been talking to someone about the Linksys Routers and they were saying that WRT54G Versions 3, 4 & 5, all work successfully. Then when I asked him about Version 2, he said that he THINKS that the router will work.
    Can someone please give me an answer: Will the Linksys Wireless Router: WRT54G Version: 2 work with a MacBook Pro?!

    I get from 3 to 6 Mbps wireless and wired, which is considerably slower than my other Windows-based desktop and notebook over my 30 Mbps cable connection. My Dell notebook and desktop consistently get 15 Mbps wireless and 22 to 28 Mbps wired. Mac OS is relatively new to me, so I haven't had a chance to read as much I need to about optimizing connection speeds. But, I can either fix it by optimizing it, or perhaps Apple will come out with a firmware update since some people have been complaining about slow connections speeds and dropping connections.
    In my work, I have several computers going at the same time, and for typical Web surfing, I see no difference in speed between the 6 Mps on the Mac and the 15 Mpbs on the Dell---it's really limited anyway by the Web site server. I do notice a difference in download times, but even for very large files, the difference is noticeable but not a problem. And, there has never been a problem streaming video or downloading trailers, etc.
    Of course, only five years ago, my cable connection was first 128 Kbps (which was high speed then), then they jumped it up 1 Mpbs, then 10 Mbps, and now 30 Mbps---so the 6 Mbps on the Mac still seems pretty fast to me.
    Speed will always be slower over the wireless compared to your Ethernet connection, but once you get speeds in excess of 1 Mbps, you only see the difference in download times, surfing is the same.
    MacBook, MacBook Pro, Mac Mini PPC   Mac OS X (10.4.7)   Dell D500 and GX620 with Windows XP Pro

  • Linksys Wireless Router - Unusable internet and major packet loss

    I installed a Linksys Wireless router at my friend's home and the internet connection is nearly unusable. About 1 in every 10 packets are lost between the router and internet modem. I have replaced this router with a 2 brand new routers of the same make and incurred the same problem (new ethernet cables and new power supplies as well). Even if wireless is disabled on the router, the same problem occurs. Interestingly, I tried a basic non-wireless router and there is no problem whatsoever. Any ideas on what could be causing the wireless routers to not work correctly?

    First, connect your system up:    EUM3005 -- WRT54GS -- computer.  And in the computer, temporarily turn off your software firewall.  Does this correct your packet loss problem?  If not, then power down your system, and proceed with the following tests, and post your results:
    Connect your computer directly to your EUM3005 modem.  (Do not use the WRT54GS for this test.)  Power up your system, and verify that you have a working Internet connection, then do the following:
    In the computer, go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key.   Post all of your results, except post only the first half of your IP address.  To copy the results to your post, highlight the data, then use the copy (Ctrl-c) keys and the paste (Ctrl-v) keys.
    Next, power down your entire system, then connect the WRT54GS to your EUM3005.  Connect your computer to the WRT54GS.  Boot up your system.  Go into the WRT54GS setup menu  (at 192.168.1.1)  and ping the EUM3005.  Did that work?  Next, in the WRT54GS, go to the "Status" tab, "Router" subtab.   Look down the page to the area labeled "Internet", then post the following info from the page:  "Login type", "IP address", "Subnet mask", "Default Gateway", and "Primary DNS"  values, except post only the first half of your IP address.
    Is the IP address the same from both tests?

  • I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

    I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac.  The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine.  Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
    The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection.  Sharing is also turned on in the Windows printer control panel for this printer (under properties).  The Mac is a G5 running 10.5.8.  When I try to print a page from the Windows machine it gets hung in the print queue.
    Any advice how to proceed would be appreciated!
    thx,

  • My iPad will no longer connect to my Linksys wireless router.  Every other electronic device in our house connects just fine.  What can I do?

    I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty.  One night recently I could not get on the internet through my iPad.  I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network.  All the other electronic devices in our house are connected and functioning fine.  Can anyone walk me through the steps to correct this problem?
    I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network.  When I came home, though, I was not able to connect to my home network.

    If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
    It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
    Good luck

  • How do I connect my laptop to my Linksys wireless router through the internal wireless card?

    I just purchased a gateway laptop and was trying to hook my Linksys wireless router up to it. Ive gotten it hooked up but only through the secondary device (that catches the signal)... I was wondering if there is anyway that I could make my internal wireless internet card a point or no? Can I only connect it to the USB network adapter or is there really a way to go COMPLETELY wireless? Thank you for your time...

    Is your internal wireless card enabled? Go to device manager and make sure it is enabled.
    Chuck

  • I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

    I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have.  would love some good tips.

    Try this:
    Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

  • I'm trying to install a Linksys wireless router.  Went th...

    I'm trying to install a Linksys wireless router.  Went through the installation software and all appears to be in order. Except that the message that I'm getting is that my router is not signed into my internet connection.  Yet it is--I'm writing this aren't I? 
    The 4 green lights are on and I've reviewed the installation instructions.  Any help? 

    You need to make sure that you have  an active internet connection from your ISP (Internet Service Provider). What connection are you using, CABLE or DSL ?

  • Can't connect PB G4 to linksys wireless router when 64bit is established

    Hello-
    I have my PB G4 connected (wirelessly) to a linksys wireless router WRTP54G. If I don't have security set on the router, the PB connects. Once I add the security (64bit) and enter the password, the message "There was an error joining the AirPort network” comes up and I can’t connect. I've connected my other laptop to the network (a PC).
    Any ideas on how to fix this? Thank you in advance.

    Does your router support any other form of encryption? See if this KB article makes any sense to you.
    AirPort: Joining an encrypted wireless network
    Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
    Yang

  • Airport express using WPS to Linksys Wireless router?

    I have a Linksys Wireless router set up to server wireless signal to macs and PCs in my office. It works great, but one of the far offices can't get enough signal.
    I bought an airport express assuming I could use it as a repeater in this office.
    I'm having some trouble connecting it (config goes great, then when i try and enable WPS mode - entering the current Linksys ID it just flashes orange after restart).
    Any tips? Should this be possible?
    .dave

    Never found a solution to this.

  • Does the airport time capsule eliminate the need for my cisco linksys wireless router?

    does the airport time capsule eliminate the need for my cisco linksys wireless router?

    I understand that your network now looks like this:
    Modem > Security Router > Cisco/Linksys router > Devices
    If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
    Modem > Security Router > Time Capsule > Devices

  • Hi, I need help to secure my linksys wireless router, i tried the setup guide but i didnt work..

    hello
    I need help securing my linksys wireless router with speed boosters. In august me and some friends took over this rented house, and with the house we got their old internett system, we use a linksys router, This nett is open for everyone, but we want to secure it for other users. We didnt get the manual and i've tried the guide on your site but it says it cant be changed. The old owners didnt either know what to do. Is there some help i can get with this? Is there some buttom i can push to reset it and then make it possible?

    Connect your computer using wire to router. Open setup page of router by typing http://192.168.1.1 in browser's address bar, and typing password as "admin" and no user name, if admin doesn't work reset router and do above step again. Go to wireless tab, here change wireless network name from linksys to any other name. Save the settings. Go to wireless security sub-tab here change security mode to WPA personal etc, and enter you secret key in passphrase/shared key, Save the settings.This secret key will be security key of your wireless network.

  • Lost IP access to Linksys wireless router WRT54GS v.4. How to restore?

    Apologies for the long post and multiple questions. If you can answer at least one of them, I will be appreciative!
    While attempting to set-up wireless networking between my new Westell Model 6100G and Linksys wireless router WRT54GS v.4 (with most recent upgraded firmware), I lost access to the Linksys. When I hooked up the Linksys again via Ethernet to my XP PC with the modem no longer connected, I was unable to access it via IP 192.168.1.1. All I get is a blank web browser page (with the usual “diagnose, etc.” button). I assumed this is because the IP address conflicts with IP for the Westell, but I am also concerned if it is hardware failure. I have tried resetting the router, but no luck. I have tried ipconfig /all which gave me a different ip address. But when I tried to access the Linksys using this ip address, I was unsuccessful. I hooked up the router to a different pc with no present Internet access and tried IP 192.168.1.1, but still no luck. Trying the IP I got from ipconfig /all at this new pc failed as well.
    Is there a chance I have a hardware failure? I had access last night when the linksys was at its original location (I only checked it once before turning in), but I seem to have lost access ever since I moved it closer to my desk and to a new electrical outlet. When turned on, the Linksys has green lights in the right places, so it looks fine, but, again, no access via IP.
    If it’s not hardware failure, how do I find out what IP address the Linksys actually uses now if it is no longer 192.168.1.1? Or how do I change it?
    Is a WRT54GS v.4 worth the trouble or should I start over and upgrade to a newer router?
    Is Linksys the best choice with the Westell 6100G? The configuration procedures seem very complicated compared to my ease of router/modem configuring in the past.
    Solved!
    Go to Solution.

    "_when I setup the Westell modem in bridge mode, will I lose my Internet connection?_ "
    Answering my own question: "yes."
    I found what looks like a good step-by-step guide to hooking up a Westell 6100 to a Linksys
    router at:
    http://www.dslreports.com/faq/vz/4._Hardware#13600
    It provides more detail and up-to-date illustrations than Verizon's instructions at
    https://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/QuestionsOne/87126.htm
    (which appear to be for an earlier version of the Westell 6100), although they are otherwise similar. The DSLreports faq confirms that Internet and IP access to the modem will be lost during the setup phase. For a "newbie" at such linking, this bit of information is very helpful!
    Thank you, Telcoguru, for confirming that I should have followed the instructions exactly from beginning to end before becoming concerned and skipping steps.
    I will close this thread and wait for a long lazy day, to try linking the Westell and the Linksys again. If I need to post again, it will hopefully be with more specific questions about specific steps that haven't worked as they should.

  • Linksys wireless router + Airport Express

    Hello Everybody,
    I just installed the Linksys wireless router to share Internet and printer - works fine with my G5.
    But - now I cannot see the airport station anymore which I used to transfer music to different rooms. If I start Airport exp. administration programm, it shuts down the wireless connection to the router.
    So how to install now?
    Thanks for help
    Andreas
    iMac G5   Mac OS X (10.4.3)  

    Hard reset the Airport Express and configure it join your new Linksys wireless network.
    iFelix

Maybe you are looking for