Macbook CD2 802.11n not working

I have a macbook (cd2) and it wont connect as a 802.11n to my linksys router that has 802.11n. i can get the Atheros ar5008 to connect as N while in my mac partition, but i cant get it to connect while i am in XP. i tried reinstalling the latest driver, and deleting all the "preferred networks," but it's not working

Boot Camp Beta 1.2: Windows XP (SP2) unable to connect to 802.11n wireless router or AirPort Extreme (802.11n) Base Station
Relevant previous discussion.
iFelix

Similar Messages

802.11n not working.....6hrs of frustration!!!!!!!!!!!

I've spent basically all day yesterday on the phone with Apple tech support and even took my unit to an Apple store with no conclusion yet. Here's the deal...
I have a PC laptop (Windows XP SP2, non wireless)....D-Link cable modem running to my 802.11n base station.....then my base station running to my PC laptop. I get service fine on the laptop. In the same room (10 feet away) is my Powermac G5 (OSX 10.4.8 and all current software updates) with a airport card. I'm in an appt building so I know my airport card is working because I'm picking up other networks from other tenents. I have a green light on the base station but I can't connect for the life of me on my G5. I even connected the modem/base station to my mac and it recognizes it through the airport utility and I was able to name it and give it a password but even directly connected to my G5 my wireless card isn't picking up the signal..........PLEASE HELP!!!!!! Forgot to add....I took the base station to the apple store and it worked there! Do you think it's the D-Link modem?

The Airport Extreme defaults to a 10.1.1.x address.
Most PC-Based Wireless hubs distribute 192.168.1.x
addresses. Set your Airport Extreme to redistribute
192.168.1.x addresses, and you will be able to
connect.
MacBook T2700
2gHz, 12GB, 160G Windows XP Pro Dual
Boot with latest OSX
ummm...no..that should not matter at all

First time working with 802.11n, not working properly?

Hello,
This is the first time I use 802.11n in my network there is only one AP1141 but the clients don't connect at 802.11n rates, instead they connect at data rates as low as 11 Mbps. At the begining they connect at 144 Mbps but immidiatly it decreases to 11 or 12.
Many of our wireless clients in the company are Intel(R) WiFi Link 5100 AGN.
Any comments?
AIR-AP1141N-A-K9
AIR-WLC2106-K9
6.0.182.0
Let me know if more info needed?
Thanks

Hi George,
So you suggest to keep only WPA2/AES?
Regarding the coverage area keep in mind this is a really small 4 floor building with an AP floor floor, I installed only one AP1141 in my floor and kept the AP1131 in the other 3 floors, I might reduce the power to half since I don't need them working at full power unless I need coverage in the stairs in order to enforce roaming to IPPhones. Also, I don't want to bond channels on 2.4 because I read that as a recomendation in a Cisco's document (anyways I did not find how to do it in 2.4, wuld be a nice tip if you tell me how just in case) so 144 Mbps would be great as long as it works properly. I did not experienced these rate hoping until I enabled this AP1141.
And yes most of the clients that reported issues are Intel (engineering team, haven't checked the rest yet).
Regards!

Airport Express 802.11n - not working at all!

I have had some trouble with my Airport express. Nothing works. I have tried to hard reset and factory default reset but nothing happens. It's only blinking yellow, and if i put a ethernet cable into it it turns green, but it still not showing in either airport (wireless) or at the airport utility. I have checked with both my MacBook Pro and my Mac Pro.
I also have a Airport extreme and i tried to expand the network wirelessly when i had the express up and running, but when it restarted it self it didn't show up nowhere.
Can someone help me out here?

After a factory default reset, the AirPort Express is broadcasting a wireless network with a name like Apple Network xxxxxx.
If you are tying to configure the Express using wireless, you need to make sure that your Mac is logged on to this network first, before you open AirPort Utility.
It's also possible to connect an Ethernet cable from your Mac to the AirPort Express and then open AirPort Utility. Once the Express has been configured an updated, you can remove the Ethernet cable.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

How can i transfer my calendar from iphone to macbook? Sync is not working!, how can i transfer my calendar from iphone to macbook? Sync is not working!

how can i transfer my calendar from iphone to macbook? Sync is not working!, how can i transfer my calendar from iphone to macbook? Sync is not working!

If the calendar is connected to a server account, like Exchange, you cannot sync via iTunes. You need to connect to the server on your MacBook.
If it is not connected to a server account then you need to ensure syncing is set up in iTunes. This is in the Info tab for your selected phone in iTunes.

My macbook pro retina is not working camera after updating Mountain lion.

My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

HT2090 my macbook air camera is not working

My Macbook Air camera is not working when I try to use photobooth. I have no problem with google hangouts or skype. How can I resolve this problem?

• Restart your Mac. If the problem continues, use the Disk Utility in your Mac's Finder > Go > Utilities folder to repair permissions. Then test the camera again.
• If the your trouble persists,. reinstall OS X Mavericks. Repair permissions again immediately following the restart that completes the reinstall and before testing the camera again.
• Also check your Mac's  > Software Update... or Apple - Support - Downloads for latest Mavericks updates applicable to your Mac model such as OS X Mavericks 10.9.1 Update.

Macbook 6,1 charger not working

Macbook 6,1 charger not working A1344
The Macbook is a 6,1 purchased in 2010.
My friend has had a go at the shooting suggestions but nothing seems out of sorts beyond it not working properly.
No damage or signs of misuse.
Ordinarily I wouldn't have thought a warranty would still apply but this paragraph on Apple support page made me wonder.
--- Whether your product is in or out of warranty, you can take your adapter to an Apple Authorized Service Provider or Apple Retail Store for evaluation and replacement if necessary. Pending the results of the evaluation, you may or may not be eligible for a replacement adapter free of charge. Signs of accidental damage would negate any coverage. Be sure to bring in the computer used with the adapter; it is required to process potential adapter replacements.---
When my friend took the Macbook and charger into an Apple Store in central London she was told it's out of warranty and best option is to just buy a new one.
Any thoughts regarding whether Apple has approved free replacement for these chargers?
She is in UK but machine was purchased in Australia
http://support.apple.com/kb/TS1713
thanks
Jason

all sorted now - new charger given
turns out a bit of intelligent discussion yielded results
so .. if you have any problem with an older mac take it into an Apple Store
theres an excellent chance they will fix and replace even when the machine is out of warranty

Suddenly my MacBook Air password does not work to open my session. I haven't changed it so need help, thanks!

The password I usually use to open my MacBook Air suddenly does not work. I haven't changed it so don't know what to do next. Will appreciate your help!

Resetting or changing an account password:
http://pondini.org/OSX/Password.html

I downloaded Acrobat Pro XI on my MacBook and it's not working. There's a message: Click reopen to open the application again. This report will be sento to Apple automatically. I did it several times and even restarted my laptop. Nothing happened. Any hin

I downloaded Acrobat Pro XI on my MacBook and it's not working. There's a message: Click reopen to open the application again. This report will be sento to Apple automatically. I did it several times and even restarted my laptop. Nothing happened. Any hints?
Thanks,
Cristina

you don't have to purchase acrobat pro xi. you can, but you can also use it via adobe's creative cloud subscription service.
to use it via cc, uninstall your current trial.
then go here and log in with the same adobe id used to pay for your cc subscription and start your acrobat xi download, Adobe: Creative, marketing, and document management solutions

MacBook Pro - 802.11n, WPA2-Personal and Time Capsules

I recently moved to using 802.11n (5GHZ) mode on my Time Capsule using WPA2-Personal security. I am unable to connect to the wireless network which is extremely frustrating since this is all Apple hardware. I have no problem connecting to the 802.11n 5GZ network using one of my PCs.
My MacBook Pro has the latest software updates available and does have 802.11n enabled.
I have been looking for similar issues on the forum and have tried a few things that were suggested by others, but nothing works. I've reset the router. Reset the SMU. Haven't reset NVRAM yet.
I have a mix of Apple and PC hardware that is connecting to this network. My 24" Intel iMac (Core 2 Duo) connects just fine.
I'm hoping there is a GURU on this forum that can assist me.
Thanks,
J.d.

I would try:
1. Examine your system.log for the error you are getting, if you cannot authenticate with the router it will say why. Go to the Apple icon, select "About this Mac", select "more info" button in the center, select "Log" under Software on the left panel side, select "system.log" then scroll to the bottom, look for errors in the log related to "airport" or 802.11...
2. Go to Finder/Utilities, pull up keychain access.app, click on System on the left, you should see an entry for your WIFI network, delete that entry, close Keychain access.
3. Try removing, reboot then re-add your Aiport entry. Go to System Parameters, Network, highlight "Airport" click on the minus button and remove it. Reboot your computer. When it comes back up go back to System Parameters, Network, then click on the button and re-add the Airport, when it says Airport 2, over write that with just "Airport", then click on Advanced, click on button to add the Preferred Network back in, type the name of the SSID on your router, then select WPA2 Personal from the drop down menu type. You can also display the password to confirm it matches what you input in the router for the password for WPA2 Personal.
Under TCP/IP, if you are getting a private IP address from the router via DHCP, then set IPv4 to DHCP. I would not use IPv6 for time being, set that to Off. Next click on your DNS and input your DNS if not automatically filled in by the router with DHCP, I always like to add a DNS not provided by the router that way if it fails or you go to Starbucks you will always have a DNS entry that works, I would input OpenDNS's entries, so those would be under IPv4:
208.67.222.222 and other is
208.67.220.220
So to connect, your computer needs to have an IP address, either DHCP or manually input (like 192.168.1.xxx) etc.
Next you need a DNS entry if not provided for by your router (should be if it is dishing out DHCP client addresses).
WINS and Proxies are only used in corporate environments where they are using a windows domain and/or proxy servers as a gateway to the WAN.
WPA2 Personal offers much better security than WPA or WEP shared, if you use a password make it at least 8 characters in length 10 is better. The longer you make it the higher the security, but it must match exactly what the password was set for WPA2 on the router.
TO make sure you are not having signal/noise problems get as close to your router as you can to establish the connection once that is done you can move farther away.

Extreme(802.11n) not connecting to internet

Comcast is my internet provider. New Airport Extreme is my 3rd airport in 6 years. First airport fried due to lighting strike four years ago. When I got my 2nd one copied all setting and after figuring out I needed to shut down the cable modem for 1/2 hour to let it reset everything worked. After four years 2nd airport is getting funky have to reset it every couple of days, purchased new Airport Extreme(802.11n). After updating airport utility software on MacBook, setup new airport with same settings. According to Utility everything is OK but it will not down load any web pages, mail or upload. When I switch back to old airport everything works. I have rechecked and reentered setting numerous times. I even shut down the cable modem for 24 hours hoping that it would reset like some telephone DSL systems that only allow two connections. Note I have not upgrade old airport extremes firmware to 5.7 I assume the extreme(802.11n) purchased in August 2007 came with new firmware.

Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Macbook CD2 802.11n not working

Similar Messages

Maybe you are looking for