Macbook changes inherited permission on Windows Server

Hi all,
Im using a Mac Book Pro (Mac OS X Lion 10.7.3 11D50b) with Microsoft Office 2011.
I make an SMB connection to my Windows 2008 File Server using the "Connect to Server" function in finder. I am then prompted to login to the server and I use my active directory username and password.
Once logged in I open a Microsoft Word Doc from the windows server by double clicking on the doc in finder. I edit the doc in Word 2011 for mac and then click save.
Once the doc has been saved, some (not all) of the inherited permissions on the doc have disappeared. This means that other users on my network cannot open the doc as they get a permission denied error.
I have tested this several times and it is very repeatable.
Have been working in this environment for several months with no issues to date, this seems to be a new issue.
Need help ! - Any thoughts?
Thanks in advance.
MM

This was happening to me too. I had to go on a Windows computer on the network and re-add the user "everyone" to the permissions section under "security". I found that by right clicking on the file name and choosing properties.
Haven't figured out how to get my MacBook Pro to stop doing that just yet.

Similar Messages

Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B

Macbook clients cannot connect to Windows Server 2008 RRAS with L2TP/IPSec

Hi everyone,
I had installed "Remote and Routing Access" or a VPN server on Windows Server 2008. The connection type set up is L2TP/IPSec. All the Windows clients can connect to the L2TP/IPSec VPN server without problem but Macbook users are facing problem.
The Macbook users got the error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator."
I think it is something related to the pre-shared key encryption but I am not sure. The Macbook users could connect if the connection type is changed to PPTP on server and clients side. I searched for similar problems and solutions online but no luck, I couldn't find solution that helps. I found this is a common problem faced by many macbook users.
Does anyone have a solution or suggestion for this, please? I appreciate all the helps and suggestion given.
Thanks,
CK

Hi,
Thanks for the question, however, this forum is for Remote Desktop Clients related questions.
Regarding the issue, as Windows clients can connect with no problem, I suspect that it is a Mac side issue and I would like to suggest you contact Apple support for help.
Thanks.
Jeremy Wu
TechNet Community Support

Not able to change product key in windows server using SLui command

I have installed windows server 2012 r2datacenter and when I am trying to insert the product key using slui 3 command (in run windows),I am getting an error code as
0x80070003(The system cannot find
the path specified error)
I have tried running sfc/scannow as well but it did not work.
Kindly help me .

Hi Ashish,
Would you please let me confirm whether want to
change the product key or activate the Windows Server 2012 R2 Datacenter? Just a confirmation, thanks for your understanding.
Please use the
Volume Activation Management Tool (VAMT) and check if help you to change the product key.
In addition, please
run the
Microsoft Genuine Diagnostics Tool and check if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Request If I change public ip in windows server What will happen

Dear Sir,
Please be informed that Currently we are using Remote Desktop Services under Windows Server 2008 R2 OS with Workgroup. We configured STATIC IP (PUBLIC IP) to connect Remotely to the Server.
We created .rdp file and sent to our clients to access remotely.
Now we plan to change STATIC IP (PUBLIC IP) in the Server. Is it affect anything in Remote Desktop Service and Window server Configurations.
We plan to change IP and Recreate .rdp file and will send to our clients. Is it Ok. Please Explain
Thanking You,
Batcha

Hi Batcha,
Thank you for posting in Windows Server Forum.
Yeah, you can change the static IP address for the server, bu t as you have commented you need to recreate the .RDP file for it with new IP address and server name and then provide to user to have access.
RDP Settings for Remote Desktop Services in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff393699(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Change bytes per sector windows server 2012

Hi,
We have installed windows server 2012 Datacenter Edition on
Cisco UCS C24 M3 server. We need to install this with 4K bytes per sector and 4K bytes ber physical sector. When we specify the unit size while formatting it only changes the
bytes per cluster.
We have tried to change it with 8K & 64K but in OS it shows only in
512 Bit per sector. I have tried to get hotfixes for the same but i didn't got it for server 2012.
Please help me to resolve this.
Balkrushna

Have you looked at this:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh848035(v=vs.85).aspx

Remote Desktop Configuration on Windows Server 2012 R2

Hi, I wanted to see if anyone knows how to access the console that was known before as Terminal Services Configuration.
I've been having trouble with some servers that have 2 or more NICs and sometimes the RDP protocol won't listen on the right IP and I can't connect until I disable the other NICs.
Usually in 2008 R2 I would just go on this console and define the specific IP Address in which the RDP Protocol should be listening to, but know I can't find this console anywhere on 2012 R2.
Any ideas on how I can get there or change this setting on Windows Server 2012 R2?
Thanks
Eduardo Rojas

Hi,
Based on my research, please try the following on your Windows Server 2012 R2.
1. Start Registry Editor.
2. Navigate to the following registry key (path may wrap):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
3. Under this key are one or more keys for the globally unique identifiers (GUIDs) corresponding to the installed LAN connections. Each of these GUID keys has a Connection subkey. Open each
of the GUID\Connection keys and look for the Name value. Choose the connection you want Terminal Services to use.
4. When you have found the GUID\Connection key that contains the Name setting that matches the name of your LAN connection, write down or otherwise note the GUID value.
5. Then navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\lanatable. Using the GUID you noted in step 5 select subkey. Note it's LanaId.
6. Navigate to the following value:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp\LanAdapter. Change it's data to the value you noted in step 6. If you want RDP to listen on all LAN
adapters enter value of 0.
Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you
modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, please refer to
How to back up and restore the registry in Windows.
Hope this helps.
Jeremy Wu
TechNet Community Support

Script to automate the display language on windows server

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English with the help of MUI packs available on microsoft site. The native language of windows server 2008 R2 is Japanese. Consider there are 10 sys admins only knows
Japanese but not english. Similarly there are 10 sys admins knowing only English. I being english administrator, i should each time go to regional setting in the control panel and click on change display language to english. After
I finish my task I need to set back the language to japanese(native).
I'm looking for script which can auotmate this process.
Objective:
The script should automatical change the language to Japanese when I logoff from the system.
Here is the steps to reach "Change Display language" on windows server 2008
Go to control Panel > Category view (on right side top ) > System and Security > Clock ,Language and Region > Under “Regional Language” > Change display
language > Go to Tab “Keyboards and Languages” > Look for the dropdown menu “Choose a display language” and choose the appropriate language you prefer from the dropdown list
Kindly note this menu/option is available for Vista,Windows 7 and Windows Server 2008. This option is also available on Windows XP/Server 2000/2003 provided the LIP/MUI is installed.
Thanks
Ezakial

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English...
Thanks
Ezakial
Guys,
Forgive me, but I think you are making this far too complicated. Using a script to achieve this is, in my view the wrong tool, and a little dangerous. If your logoff script fails to run for any reason, 11 Japanese sysadmins will be waving Samurai swords
at you :-).
There is a single Group Policy setting that will do exactly what you want on Vista, W7, W2K8 & R2.
Create a new Group Policy object ("English_interface", for example.
Edit the new policy object
Drill down to "User Configuration, Policies, Administrative Templates, Control Panel, Regional and Language Options"
Pick the setting "Restricts the UI languages Windows should use for the selected user" and Enable it.
Drop down the "Restrict users to the following language" and pick "English"
Click "OK"
Link your new GPO somewhere in the OU hierarchy that contains the English user
If other (Japanese?) users are also in the same container, you can filter application of the GPO by security group so that the policy can only be read and applied by the English group.
That's all you need to do!
As a point of principle. I ALWAYS install my OS in US English then add languages, and set the locals to use their own language. This is because service packs and hotfixes invariably arrive for US English first, and some hot fixes are NEVER translated.
I'm just doing this for a single W7 build in English, to be deployed in 6 countries, with 7 different languages and 9 different keyboard layouts. Fun...
Come back if you need more help. I volunteer to visit and help if you want!
Richard
MCSE, MCITP, MCT etc.
Switzerland
RS

Receiving an automatic notification from Windows Server when disk space is low

Hello,<o:p></o:p>
Does Windows Server 2012 R2 have any such functionality built-in to enable monitoring of disk space?
We have an old VB Script file that sends me an email when disk space gets low.
Also, the following post discusses the topic regarding Windows Server 2008:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c9878861-6ba5-4d3b-b6b0-6e4b33c41853/notification-when-low-disk-space?forum=windowsserver2008r2management
I was wondering if there was any change regarding this in
Windows Server 2012 R2 .
Many thanks.<o:p></o:p>
Keith<o:p></o:p>
R K Howard

Hi,
Windows Server 2012 stays the same on that topic, you still need some kind of monitoring on your disk space.
If you don't have a monitoring solution, like for example SCOM, you can for example with powershell do what you earlier did in VB script. Either you have a scheduled task that runs as often as you'd like, or you can utilize something called WMI eventing
to trigger on an event 'disk low' but thats a bit more complicated.
See below examples on some example scripts that you could use.
https://www.simple-talk.com/sysadmin/powershell/disk-space-monitoring-and-early-warning-with-powershell/
http://technet.microsoft.com/en-us/library/ff730927.aspx
http://gallery.technet.microsoft.com/6e935887-6b30-4654-b977-6f5d289f3a63Hope
this helps you!
//Johan
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

Network troubleshooting service windows server 2008

Which network troubleshooting service/application not available on windows server 2008 by default ?

Hi,
Here is the information you may need,
Troubleshoot Windows Server 2008
http://technet.microsoft.com/en-us/library/cc753935(v=WS.10).aspx
Changes in Functionality from Windows Server 2003 with SP1 to Windows Server 2008
http://technet.microsoft.com/en-us/library/cc753208(v=ws.10).aspx
If there is any misunderstanding, please let us know what you would like to achieve.
Hope this helps.
Steven Lee
TechNet Community Support

Windows Server 2012 R2 robocopy not copying inherited directory permission from source file server to destination ?

Can anyone here please help me with Robocopy on Windows Server 2012 R2 to copy the file server content from \\OldFileServer\Data share into the local S:\Data drive ?
here's my script that I use to copy 11 TB of file server contents:
robocopy.exe "\\OLDFILESERVER\Data" S:\Data *.* /E /SECFIX /SEC /XO /ZB /COPYALL /MIR /DCOPY:DAT /R:0 /W:0 /NP /NFL /NDL /TEE /LOG:"G:\robocopy.log"
Any kind of help and assistance would be greatly appreciated.
Thanks
/* Server Support Specialist */

Hi,
Based on my tests, inherited permissions will not be copied using robocopy.exe.
That’s because that after we copy or move an objects to another volume, the object inherits the permissions of its new parent folder.
My suggestion for you is to disable the inheritance on corresponding subfolders, and Convert inherited permissions into explicit permissions on this object. After that, those permissions can be copied.
Here are some references below for you:
Robocopy not copying NTFS permissions
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b36748cd-14d1-47a5-9fb6-878ca93ad6fc/robocopy-not-copying-ntfs-permissions
How permissions are handled when you copy and move files and folders
http://support.microsoft.com/kb/310316
Powershell ACL commands? NTFS Permissions - Turn inherited permissions into explicit permissions and remove inheritance
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/884e2837-ec1d-4937-83a5-722cd00d7d16/powershell-acl-commands-ntfs-permissions-turn-inherited-permissions-into-explicit-permissions-and?forum=ITCG
Best Regards,
Amy

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

Macbook changes inherited permission on Windows Server

Similar Messages

Maybe you are looking for